R&R - how is the system partition identified?

When trying a full restore of the system partition only (from a backup stored on a network share, selecting "recreate full system" and threafter checking "system drive only"), I get a (German) error message, saying something like
"... the system partition does not exist or could not be found".
Since my R&R backups were created when my notebook was configured with many partitions (linux and windows), the partition scheme in the master boot sector was different. Now I would like to restore the system partition into the C: drive (partition "Windows7_OS") but this partition is not found by R&R. Does anone know how R&R looks for the system partition? If I would know what attributes such a partition needs to have, I could probably "fake" such a partition and R&R would restore my files...

I've read your posts. R&R has a limitation that the partition structure of the disk cannot change after you start taking backups. I think at this point, your only hope of recovering your backups is to start with a completely blank HDD (no partitions) that is as big or bigger than your original HDD. This will put R&R into a different mode called "bare-metal" where the partition structure, in addition to the contents, are restored. The way you are doing it now, R&R is trying to restore the contents only, but since the partition structure has changed, this is apparently failing.
Anyway, try using a completely blank HDD and restoring your backup that way. I think it's probably your only hope.

Similar Messages

How does the system calculate nondeductible taxes?

Dear Gurus,
How does the system calculate nondeductible taxes?
Thanks..

The sytem calculates the Taxes based on the Tax rates maintained in a tx code, the Caluctaion is based on the taxing procedure assigned to the Country.
Non deductible tax is identified based on the Account key assigned to the Condition type in the Taxing procedure.
The Non deductible tax Account keys are
NAV - Non-deduct.input tax ( This will distribute the tax into a new line item)
NVV - Non-d.input tax dist ( this will Distribute to relevant expense/revenue items )

The Program Cannot restore the system partition not enough space

Hi..,
When i try to restore my pc using OKR Button, I am getting This Notice from OKR Application.
"The Program Cannot restore the system partition because there is not enough available space on the hardrive"
Please help Me ...
Thanks in Adavance.

Hi Jaulpellissery,
Welcome to Lenovo Community Forums
I’m sorry to hear that the OKR (One Key Recovery) is not working as expected and displaying error message, this issue will occur if any changes are made in HDD (Hard Disc Drive) partition. Please let me know if you have made any changes in the partition space.
Hope to hear back soon
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Looking for a One to Many script to extend the system partition for Windows 7 machines

Looking for a One to Many script to extend the system partition for Windows 7 machines

Pre-written scripts can be found in the repository:
http://gallery.technet.microsoft.com/scriptcenter
If you can't find what you need, you can request a script (no idea if anyone ever bothers to fulfill these requests though, I know I don't):
http://gallery.technet.microsoft.com/scriptcenter/site/requests
Let us know if you have any specific questions.
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

How will the system handle delta in the below scenario

How will the system handle delta in the below scenario
Day 1
DS--->DSO
PSA
Document Number| Customer | sales value
1001| RAMLAL | 10000
Your change log for DSO will read
Req1| 1001|RAMLAL|10000|N
DSO(overwrite)
1001|RAMLAL|10000|
Day 1
DSO--->Cube
Req1| 1001|RAMLAL|10000|
Day2
DS--->DSO
PSA
Document Number| Customer | sales value
1001| RAMLAL | 30000
Your change log for DSO will read
Req2 | 1001 | RAMLAL | -10000 | X
Req2 | 1001 | RAMLAL | 30000
DSO(Overwrite)
1001 | RAMLAL | 30000
Day 2
DSO--->Cube
Req1|1001|RAMLAL|10000|
Req2|1001|RAMLAL|20000|
Please explain with example
Scenario 1: Req1 & Req2 are deleted ONLY from change log on Day 3
On Day 4:
DS--->DSO
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 10000|C
What will happen to the Sales Value in the cube?
What will happen to the Req1&Req2 in the cube?
Thanks
Tanya

Tanya,
Please explain with example
Scenario 1: Req1 & Req2 are deleted ONLY from change log on Day 3
On Day 4:
DS--->DSO
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 10000|C
What will happen to the Sales Value in the cube?
What will happen to the Req1&Req2 in the cube?
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 10000 |C
--> Here 1000 is not correct value, as 1000 is change to 3000. It should be 3000. record should be as below.
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 30000 |C
--> As this data related to sales, and i hope you are using standard ABR extractors(Business Content).
ABR datasources delivers before and after images.
Before image:
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | -3000 |C
Before image:
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 0 |C --> value changed from 3000 to Zero.
If you are loading in additive or Overwrite into an ODS total sales for 1001 at end of day 4 will be Zero.
Hope it helps
Srini

Can anyone let me know how does the system calculate forecast strategy?

Hi all,
I am new in Demand planning,, I can see a couple of Forecast strategy used in the production. I would like to know how does the system does the calculation for the forecasting strategies like
36     Median method
13     Moving average
94     Linear regression
etc.
Can anyone pls guide me how does the system do the calculation and how to validate those calculations!!
Thanks
Pooja

Hi Pooja,
The below link will contain the detailed list of all forecast strategies alongwith how
it will be calculated alongwith the formulas
http://help.sap.com/saphelp_scm70/helpdata/EN/ac/216b6e337b11d398290000e8a49608/frameset.htm
Please confirm whether this helps you to resolve your query
Regards
R. Senthil Mareeswaran.

How does the system knows hire action first

Hi all,
Iam new to this community, recently i have joined as an SAP HR trainee ,and i am undergoing SAPHR training Programme.
why can't the system allow us to do promotion action before Hire action?where do we configure this to make it happen, how does the system knows to do the Hire action first, where are the settings for this..
Swathi

hai
there are a number of programmes running in the back groung when u do any application.
the validations will be written in them
when u try to do something through the programe running at the back ground does these validations like the example u have taken when u do the promotion action it checks whether actions exists or not if not then it throws the error written in the program.
regards
nalla

How does the system identifies whether we use Psotive or Negative Time Mngt

Dear All,
How does the system identifies whether we use Psotive or Negative Time Management.
Appreciate your early response.
Regards
Rajesh

Hi
1. In positive time management we record the actual time of the employee working in organization and following are the infotypes we need to maintain in master data,
          1. Organztion Assignement [0001]
          2. Personal Data [0002]
          3. Absence Quota [2006]
          4. Planed working time [0007] with the time management status " if you are using PDC then "2" " Or "1. Time evaluation actual time".
          5. Time Recording Info [0050]
2. In Negative time management we are only recording the time deviation like "Absence, Illness, Leave" and following are the Infotype we need to maintain in master data,
         0001, 0002,0007 with time management status "0" i.e No time evaluation and 2006.
Best of Luck
Swapnil

How does the system knows age or seniority is crossed for so and so... EE

Hi Experts,
In my project we have configured some Health plans based on ages and seniority,
Employee can enroll in to the plan when they reach the age or seniority,
my question is how does the system knows age or seniority is crossed for so and so... EE, where exactly we do this setups
Pleae let me know your valuable answers
Regards
Sreeni

hr_entry_date and you can use various
fm to calculate this, It reads 0019, 0041 or Hdate feature
3QP8                           Time related calculation function mod.
HR_AUPBS_SENIORITY             Calculate the whole length of service of employee
3RP3A                          Leave schem proration modules
SGPS_LS_SENIORITY_CALCULATION Function for seniority calculation for Singapore Leave Scheme
HRDO
HR_DE_PBS_SENIORITY_PERIODS
HRFPBS4AV0
HR_PSF_AV_ANC_INPUT_SENIORITY
HRF_METADATA_IT
HRF_READ_SENIORITY_IT

How does the system calculate taxes?

Dear All,
How does the system calculate taxes?
Can anybody explain in detail how the values will flow from PB00 / PBXX to BASB ?
Is this flow will remains same in both deductible & non deductible taxes ..??
Pls explain
With Regds

Hi
Just remove the base type 362 in the taxing procedure & check if your tax is calculating or not.
The Tax determination still works.
FORM FRM_KOND_BASIS_362.
*Application country specific
*This alternate base value is to be attached to BASB. This routine
*fetches KZWI6 captured in the pricing procedure.
Thanks & Regards
Kishore

Does aperture 2.1 library need to be on the system partition ??

Hi !
Does aperture 2.1 library need to be on the system partition ??
Aperture library overfilled my system partition,
So I moved it to another partition by Aperture preferences.
Aperture sees where it is,
but wants to set up a new library,
I suppose on my full system partition.
Any suggestions are appreciated,
as you might guess,
I am new at Aperture.
Thanks for any interest and help.
Ken

No the Aperture Library does not need to be on the same partition with the System. It should, however, be on an internal or eSATA-connected drive.
Generally partitioning is a waste of spce. Please describe your exact setup of hard drives and partitions.
What most folks really should have is a Referenced-Masters Library, which deals with the issue of overfilling drives.
-Allen

How can the system automatically assign lead(Sales Prospect) to sales manager which is one of the partner function

How can the system automatically assign lead(Sales Prospect) to sales manager which is one of the partner function ?

Hi Deep,
you can go through below links if you have not gone through already.
Lead Distribution - Lead Management - SAP Library
How to Distribute Leads Automatically to Partners in SAP CRM?
Rgds
Hari

How does the System.in.read() works?

Hi!I'm trying to read some chars from the console.So here is my code of reading the two chars:
       char ch1='\u0000';
       char ch2='\u0000';
       System.out.print("Enter the first char:");
       ch1=(char)System.in.read();
       System.in.read();
       System.out.print("Enter the second char:");
       ch2=(char)System.in.read();
       System.out.println("You have typed the following letters:"+ch1+" , "+ch2);My problem is that if I don't add the System.in.read(); line after reading the first char i wont be able to read the second.But I saw on a code on the net that they put it.So I've put it too but don't understand what it does.I mean the System.in.read(); function reads until it gets -1.But in my case it's gonna get '\n'.So how does this function works?Thank you!
Edited by: jcoder86 on Oct 9, 2009 5:36 AM

jcoder86 wrote:
Hi!I'm trying to read some chars from the console.So here is my code of reading the two chars:
char ch1='\u0000';
char ch2='\u0000';
System.out.print("Enter the first char:");
ch1=(char)System.in.read();
System.in.read();
System.out.print("Enter the second char:");
ch2=(char)System.in.read();
System.out.println("You have typed the following letters:"+ch1+" , "+ch2);My problem is that if I don't add the System.in.read(); line after reading the first char i wont be able to read the second.But I saw on a code on the net that they put it.So I've put it too but don't understand what it does.I mean the System.in.read(); function reads until it gets -1.But in my case it's gonna get '\n'.So how does this function works?Thank you!
Edited by: jcoder86 on Oct 9, 2009 5:36 AMThat's wrong. System.in.read() reads a byte from the stream. -1 is returned if the end of stream has been reached (that usually doesn't happen if you read from stdin)
The second System.in.read() is there to throw away the line terminator.

How does the system decide where to put a file on the desktop?

So you've just created some sort of file, and you choose to save it to the desktop. A second later--presto!--the file icon appears on the screen.
How does the computer decide where on the desktop to put that icon?

I'm not 100% on this, but I think the system will save files to the last destination you nominated unless you designate another destination at the point of saving. I guess you previously saved something to the Desktop.
Just tested it on my two Macs and that's how it behaves here.

How does the system know...how to read customore pricing procedure

Hie Guys, Can you please let me know how the system knows How to ready customer pricing procedure.
system always reads customer pricing procedure from Sold to party. can you please let me know if there is any setting for the system to know how to ready the customer pricing procedure. what should be done if we want the system to read it from ship to party?
thaks!
Marry.

Dear,
Seems like you can get the help of abaper and see at what point system check the different combination for pricing procedure determination.
If there is any EXIT / Enhancement available at this point, you can write a logic to fetch the customer pricing procedure from the SHIP TO PARTY Master data.
Thanks & Regards,
Hegal K Charles

R&R - how is the system partition identified?

Similar Messages

Maybe you are looking for