R12 Valueset on synonym do not return records

After R12 Upgrade I'm facing a problem that value set which on synonym 'AR_BATCH_SOURCES' is not returing reocrds. This value set is attached to DFF segment of fnd common lookups, When users tries to select value from the DFF segment of this lookup, no records are retuned.
Unlike concurrent program where OU mode needs to be set, not sure what needs to be done in case of value set that are attached to the DFF segments.
Any pointers around this problem ?
Thanks, Bharat Jain

In addition to the above, please see if the following docs help.
How to view org-specific data in a MOAC environment [ID 415860.1]
Oracle Applications Multiple Organizations Access Control for Custom Code [ID 420787.1]
How to set the Organization Context in R12? [ID 437119.1]
SQL Queries and Multi-Org Architecture in Release 12 [ID 462383.1]
Thanks,
Hussein

Similar Messages

Reports not returning records utilizing different currency type.

Good morning,
My company has numerous subsidiaries utlizing CRM On Demand. Although our defauct currency is USD, one of our operations enters opportuntiy data in Canadian dollars. Both currency types are active in the system but for some reason, the custom reports I have created are not returning records created by our Canadian company entering in CAD.
There is probably a quick solution, but so far I have yet to find it! Thanks in advance for your feedback!
Ryan

yes...your report won't show data for canadian currency. even the admins won't be able to see it.
try this fix instead:
you will have to create a new field for currency in the opty page layout and change it to canadian dollar otherwise the currency would still appear as USD in the database.
Then use this field in your reports.
This should help. please let us know your feedback.

Group Used as LOV does not return records

Have:
1. A header table called Claims
2. A detail table called ClaimLines
3. The Claims Table has a foreign key called emp_no which refers to an employee table ( Claims for an employee)
4. The ClaimLines table has a foreign key called mem_id which refers to an employee family members table that also has emp_no as a foreign key (family members for an employee)
5. A JHS group for Claims that shows the employee name and employee id. An LOV populates the employee name and employee id
6. A details group fro CalimLines that shows family member name. An LOV populates the member name and member id. (The idea is to pull family members for the employee selected in the header section in 5 above.
Problem:
The calims LOV populates the employee name and employee id correctly.
When I move to the calimlines (details), the members who should be restricted to the employee selected in the Claims group does not return any records.
The LOV for the members is based on a VO called DependentsofEmpolyee that has a where clause emp_no=:p_emp_id (:p_emp_id is a bind parameter)
The LOV group for the members has an EL expression in the Query Bind Parameters
p_emp_id=#{bindings.ClaimsEmpId.inputValue}. The expression is to restrict the members to those who belong to the employee selected in the Claims section of the page.
Debug gives the following information:
-ViewObject DependentsOfEmployee1: bind parameter values have not changed, NO Requery performed.
It seems that the p_emp_id is not being populated with the emp_id from the header section(Claims)
The same EL expression works if applied to a dynamic LOV. The drawback of the dynamic LOV is that is only populates two fields, the value attribute and the meaning attribute. In our case we need to populate more than one attribute.

Thanks for the input.
I tried the following
1. Create a managed bean in faces-config.xml.
<managed-bean>
<managed-bean-name>FamiliyLovContext</managed-bean-name>
<managed-bean-class>FamiliyLovContext</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
2. Updated the skeleton class FamilyLovContext.java to:
public class FamiliyLovContext {
Number empId;
public void setEmpId(Number empId) {
this.empId = empId;
public Number getEmpId() {
return empId;
3. Copied tableLovItem to tableLovItemFamily and added the following to the section
<af:selectInputText
<af:setActionListener from="#{bindings.ClaimsEmpId.inputValue}"
to="#{FamilyLovContext.empId}"/>
4. Used the the new template for the lov item in the claimlines group.
5. set the query bind parameters of the lov group to #{FamilyLovContext.empId}
I gor the following error
16:38:08 ERROR (ApplyRequestValuesPhase) -java.lang.IllegalArgumentException: argument type mismatch
javax.faces.el.EvaluationException: java.lang.IllegalArgumentException: argument type mismatch
     at com.sun.faces.el.ValueBindingImpl.setValue(ValueBindingImpl.java:248)
     at oracle.adfinternal.view.faces.taglib.listener.SetActionListener.processAction(SetActionListener.java:50)
     at javax.faces.event.ActionEvent.processListener(ActionEvent.java:77)
     at oracle.adf.view.faces.component.UIXComponentBase.broadcast(UIXComponentBase.java:548)
     at oracle.adf.view.faces.component.UIXEditableValue.broadcast(UIXEditableValue.java:243)
     at oracle.adf.view.faces.component.UIXSelectInput.broadcast(UIXSelectInput.java:170)
The ClaimsEmpId attribute is Number(4,0)

DrillThrough Not returning Records

All,
We are runnig BPC V7 SP6, SQL 2008
We have all system function working fine.
I have set up the drillthrough, Everything is working finr but when BPC submits the query to SQL server it adds ]] at the end
Because of this the error comes up as caan not connect to database.
e.g.
it submits
select * from dttable ]]
it should submit
select * from dttable.
Has anyone seen this? Is this a product bug?
Any help would be appriciated.
Sam
Edited by: Sam Patel on Nov 12, 2009 4:10 PM

In DB server I strted the trace in SQL Profiler to see what was being submited to the database as i was geting message "can not connect to the datbase"
SQL Profiler can show you who is sending what commands to database.
I have tested this with few SQL,Text,Excel ODBC drivers, They all submits the query with ]]>
Once again we have BPC 7 SP6 Win 2003 server Distributed servers, App server 32 bit, db server 64 bit.
using ODBC from App server to get to SQL server
Sam.
Edited by: Sam Patel on Nov 13, 2009 1:17 PM

AP_CHECKS_V in R12 not showing records

After we have agraded our system from 11i to R12 the view AP_CHECKS_V is not returning any values and one report based on this view is stuck. Has anyone been faced this issue?
Pls share your views.
Thanks

user11979603 wrote:
After we have agraded our system from 11i to R12 the view AP_CHECKS_V is not returning any values and one report based on this view is stuck. Has anyone been faced this issue?
Pls share your views.
AP_CHECKS_V view does not return values
How to set the Organization Context in R12? [ID 437119.1]
Oracle Applications Multiple Organizations Access Control for Custom Code [ID 420787.1]
SQL Queries and Multi-Org Architecture in Release 12 [ID 462383.1]
View Multi-Organizational views inside OBIEE [ID 1061231.1]
Thanks,
Hussein

I found out issue distinct clause in query ,refcursor not returning rows

URGENT
hi the following procedure returns records but when i add distinct clause to (open v_refcursor for select )
i.e   open v_refcursor for select distinct column1,column2   .......... in the procedure the procedure is not returning records. please help what is the issue here?
CREATE OR REPLACE procedure proc_shared_report3 (in_cust_id varchar2,in_user_array user_tab , in_acct_array acct_tab,in_report_pvlg_hier varchar2,in_fmt_pvlg_hier varchar2,v_refcursor OUT sys_refcursor)
is
BEGIN
if in_acct_array.count>0 and in_fmt_pvlg_hier is not null and in_cust_id is not null and in_user_array.count>0 and in_report_pvlg_hier is not null then
dbms_output.put_line('all are not null');
*open v_refcursor for select usr_id* from vw_get_user_profile where usr_id in (
        SELECT USR_ID FROM VW_GET_ACCOUNTS WHERE USR_ID IN (SELECT distinct up1.usr_id FROM vw_get_user_privileges up1,vw_get_user_privileges up2 WHERE
        up1.usr_id=up2.usr_id and
        up1.product_hierarchy=in_report_pvlg_hier and up2.PRODUCT_HIERARCHY=in_fmt_pvlg_hier AND up1.usr_id in (select usr_id from vw_get_user_for_customer where
        cust_id=in_cust_id)
        and up1.usr_id Member Of in_user_array) AND acct_nb Member of in_acct_array);
/* if account list is null and rest all not null */
elsif (in_acct_array is null or in_acct_array IS EMPTY or in_acct_array.count = 0) and in_fmt_pvlg_hier is not null and in_cust_id is not null and in_user_array.count>0 and in_report_pvlg_hier is not null then
dbms_output.put_line('acc is null and rest are not null');
*open v_refcursor for select usr_id,usr_type_cd* from vw_get_user_profile where usr_id in(SELECT distinct up1.usr_id FROM vw_get_user_privileges up1,vw_get_user_privileges up2 WHERE
          up1.usr_id=up2.usr_id and
          up1.product_hierarchy=in_report_pvlg_hier and up2.PRODUCT_HIERARCHY=in_fmt_pvlg_hier AND   up1.usr_id in (select usr_id from vw_get_user_for_customer where
          cust_id=in_cust_id)
          and up1.usr_id Member Of in_user_array);
/* if account list is null and format pvlg hierarchy is null */
elsif (in_acct_array is null or in_acct_array IS EMPTY or in_acct_array.count = 0) and in_fmt_pvlg_hier is null and in_cust_id is not null and in_user_array.count>0 and in_report_pvlg_hier is not null
then
dbms_output.put_line('acc is null and format is null null');
*open v_refcursor for select usr_id,tmzon_cd* from vw_get_user_profile where usr_id in (
(SELECT distinct usr_id FROM vw_get_user_privileges WHERE product_hierarchy=in_report_pvlg_hier AND   usr_id in (select usr_id from vw_get_user_for_customer where
   cust_id=in_cust_id)
   and usr_id Member Of in_user_array)) ;
/* if account list is not null and format pvlg hierarchy is null */
else -- If i get only one privilege and all other inputs then
dbms_output.put_line('acc list is not null and format pvlg is null');
*open v_refcursor for select usr_id,prod_shrt_nm* from vw_get_user_profile where usr_id in (
     SELECT USR_ID FROM VW_GET_ACCOUNTS WHERE USR_ID IN (SELECT distinct usr_id FROM vw_get_user_privileges WHERE
     product_hierarchy=in_report_pvlg_hier AND   usr_id in (select usr_id from vw_get_user_for_customer where
     cust_id=in_cust_id) and usr_id Member Of in_user_array ) AND acct_nb Member of in_acct_array);
END IF;
END proc_shared_report3;
/Edited by: raj_fresher on Aug 12, 2009 8:50 AM
Edited by: raj_fresher on Aug 12, 2009 1:40 PM

its like this ...... ?
You have to understand that without any testdata/ a reproducable testcase, all I can do is asking you to test some alternatives, I'm just guessing things from what I can make of your example, and hope you'll repost back any differences in a clear and concisive way.
What I didn't understand is why you're not just joining your tables/views instead of using inner queries.
Unfortunatly you're not providing any feedback on that, on the other hand you've narrowed down your problem to a specific part of your query? But you're not sharing why/what makes you decide to take that turn.
But: you're still using inner queries in your reply.
So, sorry, I cannot proceed/say anything useful unless you answer my previous post.
Because, there are still many other questions/doubts: I don't understand why you're not aliasing your columns properly, for example.
I don't know why you've suddenly switched to VW_GET_USER_cust_sa?
I don't know if you've tried the straight join instead of nesting queries?
And if you did, what's the problem?
Please read and understand this, so you'll get your answers by the speed of light the next time you've got a question or problem:
http://tkyte.blogspot.com/2005/06/how-to-ask-questions.html
And don't refrain from using that tag ;)

Custom reports in R12 not returning any data

I'm seeing an issue of custom reports in R12 not returning any data. So far what I've been able to dig into is that the report query itself is referring to APPS synonyms that are secured under MOAC. What I am able to do is run the query in SQL Developer after having run mo_global.set_policy_context and I receive the data I'm looking for. This is not the case when running the report through the concurrent programs request.
Secondly, I've also configured the concurrent program request to run as single operating unit mode. This aided in fixing any issues with LOVs on the parameter form. However, still no results from the report itself. I've also searched around quite extensively and added a P_CONC_PROGRAM_ID user parameter in reports developer, as well as adding SRW.USER_EXIT('FND SRWINIT') to the before report trigger and SRW.USER_EXIT('FND SRWEXIT') to the after report trigger as well. No luck. I've also tried running mo_global.set_policy_context on the before report trigger and no such luck.
Has anyone seen similar issues with this and could shed some light? At this point, the workaround I would see is to just change the query to use respective all tables and match up against the orgid, but I'd rather not do that.

I am facing exactly the same issue with 2 of my custom Reports in R12.1.3. We did our level best to find out the issue. It was always a hit and trial fix.
But the following were our observations and workarounds
0) The reports Conc Prog were in MOAC - Single mode. Both the reports had SRW INIT, EXIT and P_CONC_REQUEST_ID
1) The reports which caused the issues[NO data fetched for MOAC] had multiple Queries in the data model and one Query fetches data and the 2nd one doesnt. Both the queries when run from SQL developer after setting the org gave results.
Workaround for Report1
a) We deleted the data link connecting the 2 columns in both the queries and added a bind variable instead in the 2nd /child query to refer to the column in the parent query and linked the 2 groups.
Workaround for Report 2
a) In report 2 the queries were not linked to each other. Only one query used to return results and the 2nd one returned 0 rows. The workaround was to use the "where" conditions as lexical parameters after having set the value for the same in before report trigger.
Both the work around looks illogical. Still It worked..!
Thanks
Biju Radhakrishnan

Query returns record in SQL Developer but not in iSQLPlus

... back in a minute, I may not have done a commit at the end of the insert.
The problem I was having was I hadnt commited the record in SQL Developer but the queries where returning records in this environment but not in iSQLPlus or Apex and it was confusing me.
Message was edited by:
Benton
Message was edited by:
Benton

Finally got to know the reason why Timezone Abbr woudn't show up in SQL Plus.
I ran below query in SQL PLUS
SELECT SESSIONTIMEZONE, CURRENT_TIMESTAMP, systimestamp, LOCALTIMESTAMP FROM DUAL;
SESSIONTIMEZONE CURRENT_TIMESTAMP SYSTIMESTAMP LOCALTIMESTAMP
-05:00 08-SEP-12 12.00.31.575228 AM -05:00 08-SEP-12 12.00.31.575223 AM -05:00 08-SEP-12 12.00.31.575228 AM
Now executed the same query in SQL Developer:
SESSIONTIMEZONE CURRENT_TIMESTAMP SYSTIMESTAMP LOCALTIMESTAMP
America/Chicago 08-SEP-12 12.08.32.072424000 AM AMERICA/CHICAGO 08-SEP-12 12.08.32.072420000 AM -05:00 08-SEP-12 12.08.32.072424000 AM
The difference between the 2 outputs is the way in which time_zones were respresented. In SQL PLUS, it is shown as an offset whereas in SQL Developer as a time zone region name. Now there are many "time sone regions" that follow an offset of -5:00. This confuses Oracle and a "UNK"(Unknown) for a query like the one below when trying to execute in SQL PLUS:
select extract(timezone_abbr from from_tz(cast(sysdate as timestamp),SESSIONTIMEZONE)) from dual;
EXTRACT(TI
UNK
Therefore we need to specify the exact Time Zone Region(TZR) in order to obtain the corresponding TZD(Daylight Savings Format i.e. CDT or CST). This we do by altering the session environment vaiable time_zone
alter session set time_zone='America/Chicago';
Now executing the queries to find the abbreviated time zone( in TZD format) will finally work to return a non-null char value.
select extract(timezone_abbr from from_tz(cast(sysdate as timestamp),SESSIONTIMEZONE)) from dual;
EXTRACT(TI
CDT
select to_char(CURRENT_TIMESTAMP, 'TZD') from dual;
TO_CHA
CDT

OraDynaSet not returning the correct number of records.

Hello All, I am writing VB code in Excel 2007 and retrieving records from a Oracle 9i database. When I run my query from TOAD or any other sql app I get 56 records returned for certain query. However, when I do it from VB in excel and write the values to the excel file, it will not return the last 3 records, any suggestions? Here is part of my code:
Worksheets("Report").Range("A3").Value = ""
Worksheets("Report").Range("B3").Value = "Period"
Worksheets("Report").Range("C3").Value = "Budget"
Worksheets("Report").Range("D3").Value = "Projected"
strSQL = "select group_name,period_name,budget_value,budget_value project from nlas_bdgt_loading_stg where plant = " & plant & " and group_number = 1 order by group_number, period_num"
Set OraDynaSet = objDataBase.DBCreateDynaset(strSQL, 0&)
If OraDynaSet.RecordCount > 0 Then
OraDynaSet.MoveFirst
'Loop the recordset for returned rows
For i = 4 To OraDynaSet.RecordCount
'Put the results in columns
ActiveSheet.Cells(i, 1) = OraDynaSet.Fields(0).Value
ActiveSheet.Cells(i, 2) = OraDynaSet.Fields(1).Value
ActiveSheet.Cells(i, 3) = OraDynaSet.Fields(2).Value
ActiveSheet.Cells(i, 4) = OraDynaSet.Fields(3).Value
OraDynaSet.MoveNext
Next i
End If
Thanks,
Chris

Hello.
It's a bit weird. It works for me. If you have a look at oo4o help:
CopyToClipboard Method
Example
Applies To
OraDynaset
Description
Copy the rows from the dynaset to the Clipboard in text format.
Usage
OraDynaset.CopyToClipboard(NumOfRows ,colsep [optional],rowsep [optional] )
Arguments
NumOfRows     Number of rows to be copied to the dynaset ,
colsep     Column separator in CHAR to be inserted between columns
rowsep     Row seperater in CHAR to be inserted between Rows
Remarks
This method is used to facilitate transfer of data between Oracle Object for OLE’s cache (dynaset) and Windows applications such as Excel or Word. CopyToClipboard copies data starting from current position of the dynaset up to the last row.
Default column separator is TAB (ASCII 9).
Default row separator is ENTER (ASCII 13).
Can it be that you don't have all the References needed?
Octavio

This book has been returned. Loan not on record

I've used Adobe Dig Ed on a Windows XP computer for years with no problems. I recently switched over to Windows 8.1, and reinstalled Adobe DE, and went through the authorization step for the computer. Then I downloaded two books from the library, and read them with no problems. However, the next time I tried I ran into problems. I am able to download the books to Adobe DE. I can open the books in Adobe DE (but it would be tough to read in ADE on the computer, because of no formating). I can copy the books to my nook, the same way I always have, and they show up in my nook. But when I try to open in Nook, I get "Error dialog - This book has been returned. Loan not on record".
I turned off Virus protection and tried again, with same results.
Any help?

Worked like a charm!!
- Uninstalled 4.0, Installed 3.0.
- De-authorized ADE, removed borrowed book from library (not returned, just remove!).
- Re-authorize ADE, re-add book (no need to download again, just add already downloaded file) and move it to Nook.
- Enjoy reading!
So happy!!

How to Create a record if vo.executequery does not return any rows

I would like to update a single record on adf form. However if the record does not exist would like to create a row and save it in the table.
The user does not want to add a "create" button on the screen. Hence would need to add the create code if vo.execute does not return any rows...
How to add this and where to add?

you can have a TF router for for exists and does not exist and based on that execute transient VO and other VO.
Add a method call activity like below to create a row in transient VO
public Row createRow()
ViewObjectImpl tVO = (ViewObjectImpl)getTVO();
tVO.executeEmptyRowSet();
Row newRow = tVO.createRow();
tVO.setCurrentRow(newRow);
tVO.insertRow(newRow);
return newRow;
}

RoadMap does not return the selected step on ESS 600 Record Time entry

RoadMap does not return the selected step on Record Time entry application in ESS. Is it suppose to behave similar way or is it suppose to take user to the selected step. If yes , then is there a setting or customization that i have to take care of, as its a standard SAP delivered ESS Record working time application.
Please let me know. I appreciate your help in advance.

Check with administrator in the src configuration thing,
Cheers,
Apparao

8i Query not returning expected records

Using Oracle 8i (8.1.7), a basic spatial query is not returning all the expected results. Table1 contains a variety of polygons; table2 is simply a set of rectangles. I want to return all objects from table1 that intersect a particular rectangle. The query below mostly works, but misses out some objects. On my system, 38 objects are returned where about 41 are expected; on the client system (which does not have identical data) the problem appears to be much worse, with hardly any objects being returned. The missing objects are clearly visible on the map, surrounded on all sides by objects which have been selected correctly. Help?
Select t1.id from table1 t1, table2 t2
where t1.IsCurrent = -1
and (sdo_relate(t1.geoloc, t2.geoloc, 'mask=ANYINTERACT querytype=WINDOW') = 'TRUE')
AND (t2.ID in ('001'));

Hi,
When the non-spatial predicate is dropped, you mentioned the
objects are not missing. This means the spatial index (which will
surely be used in this case) should be returning correct results.
But it is possible the index is not used when other predicates are
specified. Please look at the "execution plan" in both cases (when the
objects are missing/not missing).
Rewrite the query as:
select /*+ ORDERED INDEX(t1 <spatial_index_name>) */ t1.id from t2, t1
This should ensure a spatial-index-based evaluation.
Let us know the execution plans and the behavior in either case.
Btw, one thing to check is your tolerance values in
user_sdo_geom_metadata.
- Ravi.

Po_headers_sv3.get_po_status is not returning Status when used in Report

Hi,
po_headers_sv3.get_po_status is not returning any value when used in an RDF report. But, when I set the MO Context in TOAD/SQL*Plus and running the same query, it is returning the status.
EBS Version : R12.1.3
Oracle Forms Version : 10g
Below is my query that I used.
* File Name :
* Modified By :
* Modified Date :
* Purpose : This report is modified for <> project. The changes are required due to PO_HEADERS_V, PO_LINES_V view changes in R12
* Modification History
* Change 1 : Replaced the view PO_HEADERS_V with the MOAC synonym PO_HEADERS
* Change 2 : Added AP_SUPPLIERS in the query to fetch VENDOR_NAME
* Change 3 : Added a join condition to fetch VENDOR_NAME
* Change 4 : Added a function po_headers_sv3.get_po_status to fetch PO_STATUS
SELECT POH.SEGMENT1,
POH.CREATION_DATE,
POH.ATTRIBUTE14 AS AR,
POH.ATTRIBUTE15 AS LS,
POH.ATTRIBUTE13 AS OBC,
POL.AMOUT,
PAHTEMP.FULL_NAME,
APS.VENDOR_NAME,
* poheaders_sv3.get_po_status (poh.po_header_id) Status -- Change 4 _+
FROM PO_HEADERS POH, -- Change 1
AP_SUPPLIERS APS, -- Change 2
(SELECT PO_HEADER_ID,
Sum(UNIT_PRICE*QUANTITY) AS AMOUT -- unit_price* quantity = extended_price
FROM PO_LINES
GROUP BY PO_HEADER_ID) POL,
(SELECT PAH.OBJECT_ID,
PAH.EMPLOYEE_ID,
PAPF.FULL_NAME
FROM PO_ACTION_HISTORY PAH,
PER_ALL_PEOPLE_F PAPF
WHERE (PAH.OBJECT_ID,
PAH.SEQUENCE_NUM)
IN (SELECT OBJECT_ID,
Max(SEQUENCE_NUM)
FROM PO_ACTION_HISTORY
WHERE OBJECT_TYPE_CODE = 'PO'
AND ACTION_CODE = 'APPROVE'
GROUP BY OBJECT_ID)
AND PAH.EMPLOYEE_ID = PAPF.PERSON_ID(+)
AND TRUNC(PAPF.EFFECTIVE_START_DATE) <= TRUNC(SYSDATE)
AND TRUNC(PAPF.EFFECTIVE_END_DATE) >= TRUNC(SYSDATE)) PAHTEMP
WHERE POH.PO_HEADER_ID = POL.PO_HEADER_ID(+)
AND POH.PO_HEADER_ID = PAHTEMP.OBJECT_ID(+)
AND POH.VENDOR_ID = APS.VENDOR_ID -- Change 3
AND (TRUNC(POH.CREATION_DATE) >= TRUNC(:P_DATE_FROM) OR :P_DATE_FROM IS NULL)
AND (TRUNC(POH.CREATION_DATE) <= TRUNC(:P_DATE_TO) OR :P_DATE_TO IS NULL)
AND (POH.SEGMENT1 >= :P_NUM_FROM OR :P_NUM_FROM IS NULL)
AND (POH.SEGMENT1 <= :P_NUM_TO OR :P_NUM_TO IS NULL)
AND (POH.ATTRIBUTE13 >= :P_OBC_FROM OR :P_OBC_FROM IS NULL)
AND (POH.ATTRIBUTE13 <= :P_OBC_TO OR :P_OBC_TO IS NULL)
AND (POH.ATTRIBUTE14 >= :P_AN_FROM OR :P_AN_FROM IS NULL)
AND (POH.ATTRIBUTE14 <= :P_AN_TO OR :P_AN_TO IS NULL)
AND (POH.ATTRIBUTE15 >= :P_LS_FROM OR :P_LS_FROM IS NULL)
AND (POH.ATTRIBUTE15 <= :P_LS_TO OR :P_LS_TO IS NULL)
&LP_CONDITION_ORDER
Please help me in this.

learnt that PO number has generated in SRM and the same PO number not exist in ECC.
check SM58 , rz20 log or Application monitor for the shopping cart.
or monitor shopping cart click the icon follow on document and errror message must throw in 1 minutes.
let us see .
1. what is the settings in define backend OBJECTS
2. check all basic data in the shopping cart - especially org data
3. run bbp_check_consistancy report for your id?
4. every user has the same issue?
SEE THE RICHARDO technique
http://wiki.sdn.sap.com/wiki/display/SRM/ShoppingCartStatusI1111-+Resubmit
Muthu
Report BBP_ALERT_SB_NOTTRANSFERED is available to change the status of the shopping cart item from I1111 to 'Error in transmission' (I1112) and later on, it is possible to retransfer this shopping cart from Application Monitor/Monitor Shopping Cart transactions.
1480994 How to process a shopping cart with status I1111
Edited by: Muthuraman Govindasamy on Jul 16, 2010 11:31 PM

Return records from Stored Procedure to Callable Statement

Hi All,
I am createing a web application to display a students score card.
I have written a stored procedure in oracle that accepts the student roll number as input and returns a set of records as output containing the students scoring back to the JSP page where it has to be put into a table format.
how do i register the output type of "records" from the stored function in oracle in the "registerOutParameter" method of the "callable" statement in the JSP page.
if not by this way is there any method using which a "stored function/procedure" returning "record(s)" to the jsp page called using "callable" statement be retrieved to be used in the page. let me know any method other that writing a query for the database in the JSP page itself.

I have a question for you:
If the stored procedure is doing nothing more than generating a set of results why are you even using one?
You could create a view or write a simple query like you mentioned.
If you're intent on going the stored procedure route, then I have a suggestion. Part of the JDBC 2.0 spec allows you to basically return an object from a CallableStatement. Its a little involved but can be done. An article that I ran across a while back really helped me to figure out how to do this. There URL to it is as follows:
http://www.fawcette.com/archives/premier/mgznarch/javapro/2000/03mar00/bs0003/bs0003.asp
Pay close attention to the last section of the article: Persistence of Structured Types.
Here's some important snippets of code:
String UDT_NAME = "SCHEMA_NAME.PRODUCT_TYPE_OBJ";
cstmt.setLong(1, value1);
cstmt.setLong(2, value2);
cstmt.setLong(3, value3);
// By updating the type map in the connection object
// the Driver will be able to convert the array being returned
// into an array of LikeProductsInfo[] objects.
java.util.Map map = cstmt.getConnection().getTypeMap();
map.put(UDT_NAME, ProductTypeObject.class);
super.cstmt.registerOutParameter(4, java.sql.Types.STRUCT, UDT_NAME);
* This is the class that is being mapped to the oracle object.
* There are two methods in the SQLData interface.
public class ProductTypeObject implements java.sql.SQLData, java.io.Serializable
    * Implementation of method declared in the SQLData interface. This method
    * is called by the JDBC driver when mapping the UDT, SCHEMA_NAME.Product_Type_Obj,
    * to this class.
    * The object being returned contains a slew of objects defined as tables,
    * these are retrieved as java.sql.Array objects.
     public void readSQL(SQLInput stream, String typeName) throws SQLException
        String[] value1 = (String[])stream.readArray().getArray();
        String[] value2 = (String[])stream.readArray().getArray();
     public void writeSQL(SQLOutput stream) throws SQLException
}You'll also need to create Oracles Object. The specification for mine follows:
TYPE Detail_Type IS TABLE OF VARCHAR2(1024);
TYPE Product_Type_Obj AS OBJECT (
value1 Detail_Type,
value2 Detail_Type,
value3 Detail_Type,
value4 Detail_Type,
value5 Detail_Type,
value6 Detail_Type,
value7 Detail_Type,
value8 Detail_Type);Hope this helps,
Zac

R12 Valueset on synonym do not return records

Similar Messages

Maybe you are looking for