Radio button names disappear in Fields menu

I'm having this very odd experience in which the names of radio buttons I've created and grouped randomly disappear in the Fields menu.
That probably doesn't describe it too well, so here's what I'm seeing:
Notice how there's a gap between "Choice1" and "Choice3"? It should read "Choice2". If you look at the form itself, there are clearly five radio buttons.
The 'invisible' buttons in the menu disappear randomly once I create more buttons. Sometimes it's "Choice2", sometimes it's "Choice5".
Any thoughts/suggestions?
Thanks!

I had the same problem; hopefully my solution will be of help to anyone searching this problem via a search engine.
http://forums.adobe.com/message/4347266#4347266
Individual radio buttons cannot be named (only the overal exclusion group can be named) or else rawValues will not export.

Similar Messages

How do you grey out a radio button if a text field is blank in Adobe Acrobat XI Pro?

How do you grey out a radio button if a text field is blank in Adobe Acrobat XI Pro?
So this what I'm trying to do:
(     )   |TEXT FIELD|
(     )   |TEXT FIELD|
(     )   |                  |
(     )   |TEXT FIELD|
I have a radio button: (     )
and a text field: |TEXT FIELD|
The third text field is blank, and I would like for the radio button next to it greyed out (user can't click on it) since the text field is blank. Is this possible to achieve? I'm assuming I'll have to use javascript, but what would the code be and would it be entered in the javascript editor for the text field or the radio button?
Thanks in advance guys

Hey, thanks, but it didn't work
I have the text fields as read only. Could that be why it's not working? Should I make the fields not read only?
Thanks,

How to create popup window with radio buttons and a input field

Hi Guys,
Can somebody give some directions to create a stand alone program to create a window popup with 2 radio button and an input field for getting text value. I need to update the text value in a custom table.
I will call this stand alone program from an user exit.
Please give me the guidance how go about it or please give any tutorial you have.
Thanks,
Mini

Hi,
There are multiple aspects of your requirements. So let's take them one at a time.
You can achieve it in the report program or you can use a combination of the both along.
You can create a standalone report program using the ABAP Editor (SE38). In the report program you can call the SAP Module pool program by CALL Screen <screen number>. And then in the module pool program you an create a subscreen and can handle the window popup with 2 radio button and an input field for getting the text.
For help - Module Pool programs you can search in ABAP Editor with DEMODYNPRO* and you will ge the entire demo code for all dialog related code.
For Report and other Module pool help you can have a look at the following:
http://help.sap.com/saphelp_nw70/helpdata/en/47/a1ff9b8d0c0986e10000000a42189c/frameset.htm
Hope this helps. Let me know if you need any more details.
Thanks,
Samantak.

Linking a radio button to a text field in a pdf form

Forgive my ignorance but does anyone know how to link a radio button to a text field in an Acobat pdf form?
I have a series of 4 radio buttons. If you click on one of them I would like to activate a text field which you then have to fill in. In addition it would be good to have it so that if you don't click on the radio button you're not able to fill in the associated text box.
I am a designer not a programmer so I don't know much about javascript. Can anyone help?
Many thanks

You might want to look at Hiding and Showing Form Fields by Thom Parker. You might also want to clear the text field when the radio button changes.

How do I create radio buttons which hide certain fields when selected?

I have a set of two radio buttons, "Yes" and "No"
When the "Yes" radio button is selected, I would like the "Bank Name", "Branch Number", "Institution Number" and the "Account Number" field to all be blocked from entering content into them.
When the "No" button is selected, I would like for all of these fields to be available to be written in.
I can do this currently with check boxes, but the problem with those is that both boxes can be checked at the same time, which is problematic.
How can I make it so that the radio buttons control whether or not the fields can be written in!
Thanks very much!

Yes, I have done this. The buttons are mutually exclusive. The are in the group "Vendor EFT" - one is named "Yes", one is named "No".
When the "Yes" radio button is selected, I would like the "Bank Name", "Branch Number", "Institution Number" and the "Account Number" field to all be blocked from entering content into them.
When the "No" button is selected, I would like for all of these fields to be available to be written in.
Not sure what code needs to be written for this.

Radio button 'Names' and grouping

Ok, I am still working on my Monster form...
Probably pushing the envelope for what Forms can do...but hey...
My "buttons" are all named "Button.section.number" (ex. Button.1.13) so that my validate scripts can quickly go through and build other tables and things....
In each section, there are 3-4 buttons where I want at-least-one to be selected.
Obviously, a "Radio Button" will give me ONLY one selected, but I am having NAME problems in that when I try to name them so the scripts will work the button come out of the group. (and crash Acrobat)
so...in a section, what I want to have is:
Button.2.0 (.hidden, .value = "Grounds")
Button.2.1 \
Button.2.2 want these 4 in an exclusive group, where an entry is ".required" for at least one of them
Button.2.3 /
Button.2.4 A validate script runs later that looks for "blank" .required fields and reports out using "userName" in an "appAlert"
Button.2.5
Button.2.16 (.hidden, .value= "MAX")
My Validate scripts go through all the sections and all the buttons finding boxes that are checked that represent problems, and copy's the fields "Export Data" to a summary page -AND- looks for empty .required fields (and other things)
I would LIKE the user to be forced to select one of : Serviceable, Deficient, Hazard or N/A for each section. (Button.1.1, Button.1.2, Button.1.3, Button.1.4 in this example)
Do I need a "button_up" script (the same in all 4 buttons) that makes sure there is at least one selected. and clearing/setting the .required's on the fields ? That seems messy. I could start the form with the last choice (N/A) checked, but that seems error prone.
The current validate script checks for empty .required fields, so if I make all 4 fields as required I will get 4 error messages, not ideal....
Ideas Please??
Idea as I was writing this.... Since Button.section.0 is hidden, I can toggle the .required flag on that? But I still need a script that will set/clear the .required when the user select -any- of the checkboxes/buttons
In case people are interested, all my sections are different sizes, but Button.section.0 contains the "Section Name" ('Grounds' for example) and when (Button.Section.number).value = "MAX" you have reached the end of -that- section. It works very nicely and is FAST becasue the build is only done when requested, not continously..
PS...this works with PC Reader ONLY. Android reader does not support this but qPDF for Android does.

I had the same problem; hopefully my solution will be of help to anyone searching this problem via a search engine.
http://forums.adobe.com/message/4347266#4347266
Individual radio buttons cannot be named (only the overal exclusion group can be named) or else rawValues will not export.

Radio Buttons + Required Input/Output Fields in Dialog Programming

Hi All,
Please find the below issue.
I have 2 Radio buttons
RB1 and RB2 defined in group RG.
And by default RB1 is selected.
I also have 3 Input.Output Fields.
F1 , F2 & F3.
Now before displaying the Screen for the end user,
I need to display as follows:
A)
RB1 = X -
> Selected.
RB2 = Space -
>Not Selected.
F1 -
> Visible.
F2 & F3 -
>Invisible.
B)
RB1 = space -
> Not Selected.
RB2 = X -
>Selected.
F1 -
>Invisible.
F2 -
>Visible.
F3 -
>Visible.
When i am debugging, the value of RB1 is not X though it is selected on the screen (by default due to Radio Button Group) & hence the below code is not working.
*_PBO:_*
LOOP AT SCREEN.
IF RB1 = 'X' AND ( SCREEN-NAME = 'TXT2' OR SCREEN-NAME = 'TXT3' ).
         SCREEN-INVISIBLE = 1.
ELSEIF RB1 = 'X' AND ( SCREEN-NAME = 'F2' OR SCREEN-NAME = 'F3 ).
         SCREEN-ACTIVE = 0.
ENDIF.
Modify Screen.
ENDLOOP.
But when i select RB2 = X on the screen.
Value is getting populated .
Waiting for your hints/ideas/suggestions
Thanks
Sri.

Alright, you defined the radio buttons and grouped them. Did you also assign Fcode to the radio button group? if not already assigned the assign something to FctCode to the radio button. If you can double click on one and assign a name, this will automatically assign to other one. If you already did that... just ignore it.
Next, by defualt, RB1 will not be having 'X' though it shows selected but you can always make it by just writing the following statement in PBO (If you dont want to mislead anybody)
if RB1 = space and RB2 = space.
RB1 = 'X'.
endif.
If you have already done that the next step would be.... Assign a screen group value to the fields F1, F2 and F3.
for example, double click on the field F1, add GR1 in groups in first box and do the same for field text/label if any. Same way, assign GR2 to F2 and F3.
Then add the following code in PBO. (Someone or you can write it better. This is just an example)
LOOP AT SCREEN.
    if RB1 = 'X'.
       if screen-group1 = 'GR2'.
          screen-input = 0.
          screen-invisible = 1.
       endif.
    endif.
    if RB2 = 'X'.
       if screen-group1 = 'GR1'.
          screen-input = 0.
          screen-invisible = 1.
       endif.
    endif.
    MODIFY SCREEN.
ENDLOOP.
Good luck... It is working code.,

Radio Button to make other field Mandatory

I have two Radio Buttons that I want when clicked on (either one) to make a Number Field mandatory. I have viewed many websites on setting a mandatory field but the script I am using will not work. I have tried a couple ways of writing it but I seem to be missing something.
I have used this script in the Show of: click & change
Here is the script that I'm using right now.
if (this.rawValue==1)
AssemblyNu-1.mandatory ="error";
else
AssemblyNu-1.mandatory ="disabled";
And this one:
if (this.rawValue==2)
AssemblyNu-1.mandatory ="error";
else
AssemblyNu-1.mandatory ="disabled";
Thanks,
HHud5757

So, I put a quick form together to test your code.
On the change event of the radio button list (not the radio button itself), I added:
if (this.rawValue == 1) tfTest.mandatory = "error";
else tfTest.mandatory = "disabled";
In my case, the radio button with the value of 1 is the one I want to make the field mandatory. If you want either button to make it mandatory, then use:
if (this.rawValue == 1 || this.rawValue == 2) tfTest.mandatory = "error";

Using radio button instead of text field

Hi. I need to convert a text field for radio button. The conversion is as follows: the user will choose one of three options on the radio button (gif, png and jpeg). If the user chooses the image format such as jpeg, for example, how should I put in value? Put image/jpeg and does not work. This text field belongs to a form that was generated automatically by a WebService Data Control. Thanks

remove the text field.
drag and drop that attribute from data control, choose selectOneRadio
in the wizard window, select fixed list and select this particular attribute and then type gif, png and jpeg one by one.
in the pagedef it would be something like below:
    <list IterBinding="myIterator0" id="image" DTSupportsMRU="false"
          StaticList="true">
      <AttrNames>
        <Item Value="image"/>
      </AttrNames>
      <ValueList>
        <Item Value="gif"/>
        <Item Value="png"/>
        <Item Value="jpeg"/>
      </ValueList>
    </list>whatever you select that values goes to db.

Radio buttons created as required fields don't change to yellow when not submitted.

I am creating an online form with required fields. Some of these fields are radio buttons. This issue is when the form is submitted without the required radio buttons selected the user is given an alert that they need to complete the required fields and those required fields become "highlighted" in yellow. In Mozilla (v16), the radio buttons do not change yellow. This features works in IE. The form works best with radio buttons versus drop-down or text box. Most of our employees use Mozilla, so would like to find a solution. Thanks.

the syten should always allow you to change except you have set the "Functional authorization for buyers"
in SPRO-MM-Purchasing-authorizationmanagement-define Function Authorizations: Purchase Order
if this is set ethn it wont allow
remove this config or remove the parameter id for EFB from SU01 from parameter tab

How to use Radio Buttons in SAP BI 7 for a set of three fields?

Dear SAP Gurus,
We are using SAP BI 7. We need to use Radio button to select one field name (out of a set of three fields) which
appeared on selection screen.
The scenario is; we have three fields
1) Field Name A
2) Field Name B
3) Field Name C
Now, we need to select one field(using Radio button) from the above and later the report related to the above
selected field should be displayed.
The three reports will be as follows:
1) Report A
2) Report B
3) Report C
if Field Name A is selected then Report A will be displayed,
if Field Name B is selected then Report B will be displayed and
if Field Name C is selected then Report C will be displayed.
To display the report we have two cases;
1) There will be a common selection screen and all the three reports will come in single workbook but in seperate worksheet.
2) There will be a common selection screen and all the three reports will come in same worksheet, one after the other.
Is it possible to create the report in this manner, if yes, please suggest the steps.
Regards,
DV.

I think you would just use commands to do the following:
1. Hide report Analysis Item 2 and Analysis Item 3 if the 1st button was pushed.
2. Hide report Analysis Item 1 and Analysis Item 3 if the 2nd button was pushed.
3. Hide report Analysis Item 1 and Analysis Item 2 if the 3rd button was pushed.
Hope that helps...

Disabling fields on the basis of radio button selected

Hi experts,
I have a requirement where in i have a dialogue screen which has radio buttons and few other input fields.
when i check a radio button on the screen i have to get an input field greyed out on the same screen immediately.
i have grouped the input fields to be greyed out as GR1.
i used the following code in the PBO of the screen which is not working,
if oradio eq 'X'.
      loop at screen.
        if screen-name = 'S_CREATE'.
          screen-group1 = 'GR1'.
          screen-input   = 0.
        endif.
        modify screen.
      endloop.
endif.
please give some input.

Hi
*Hello Just do the Following.*
*" I think you are missing the below Grouping Part otherwise your code looks ok*
*go to EDIT -->Grouping--> Radio Button Group --> Define " before this select all the Radio Buttons.*
*all the radio button names should be r1, r2, r3 etc as declared above " Make their names same whatever you give.*
*" Assign a Function Code for them So that automatic PAI/PBO will Take Place once you select a radio Button*
In TOP include/ Global area declare no of radio buttons.
data : r1, r2, r3. etc " Default they take char with one length.
if you are in Dialog program
" I think you are missing the below Grouping Part otherwise your code looks ok
go to EDIT -->Grouping--> Radio Button Group --> Define " before this select all the Radio Buttons.
all the radio button names should be r1, r2, r3 etc as declared above " Make their names same whatever you give.
" Assign a Function Code for them So that automatic PAI/PBO will Take Place once you select a radio Button
in PBO
module modify_screen.
Now in Program
Module modify_screen.
if r1 = 'X'.
loop at screen.
if screen-group1 = 'GRP'.
screen-input = 0 " or 1.
modify screen.
else" implement for other Radio buttons
endloop.
endmodule.
Cheerz
Ram

How Do I Make My Name Disappear From Menu Bar?

I use Mavericks OS X 10.9.3. How do I make my name disappear from the Menu Bar?

Or select to show the icon instead of your name in case you want to keep the ability to use FUS while gaining precious menu bar space.

How do I make each Radio button appear in the tab order?

When users tab through the form, the tab only highlights the first radio button of a group before moving to the next field or group of fields.
Example: the user is asked for the following information: LastName, Gender (M/F radio buttons), and BirthDate.
When tabbing through the form, users are taken from from the LastName field to the Male radio button, to the Birthdate Field. Never does the tab allow them to select Female unless they click it with the mouse.
It seems like this should be a simple fix, but I can't find it anywhere!
Thanks for your help.

That's the way they work. Think of a radio button group as a dropdown or list box. When any of these types of fields receives the focus, you can use the arrow keys to move through the options and the tab key moves to the next field.
If you set up the group using check boxes instead, giving each in the group the same name but different export value, they will behave as you want. A group of checkboxes will behave a bit different than a group of radio buttons, but it's close.

How to handle Event when a radio button in selection screen is clicked

Hi all,
   What is the Event generated when a radio button is clicked in the selection Screen. My requirement is .If one radio button is clicked a field in selection screen should be greyed.
   Here I used AT SELECTION-SCREEN OUTPUT. but this event is generated only if i press 'ENTER' after clicking the radio button in the selection screen.
   Is there any other way to process this radio button event?
Thanks&Best Regards,
Vishnu

hi,
try like this
TABLES : kna1,lfa1.
SELECTION-SCREEN:BEGIN OF BLOCK blk1 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : rad_but1 RADIOBUTTON GROUP one DEFAULT 'X' USER-COMMAND ucom.
SELECTION-SCREEN COMMENT 3(26) text-003.
SELECT-OPTIONS : kunnr FOR kna1-kunnr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : rad_but2 RADIOBUTTON GROUP one .
SELECTION-SCREEN COMMENT 3(26) text-004.
SELECT-OPTIONS : lifnr FOR lfa1-lifnr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN:END OF BLOCK blk1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF rad_but1 = 'X'.
      IF screen-name = 'KUNNR-LOW' OR screen-name = 'KUNNR-HIGH' .
        screen-input = '1'.
        MODIFY SCREEN.
      ENDIF.
      IF screen-name = 'LIFNR-LOW' OR screen-name = 'LIFNR-HIGH'.
        screen-input = '0'.
        REFRESH lifnr.
        MODIFY SCREEN.
      ENDIF.
    ENDIF.
    IF rad_but2 = 'X'.
      IF screen-name = 'KUNNR-LOW' OR screen-name = 'KUNNR-HIGH'.
        REFRESH kunnr.
        screen-input = '0'.
        MODIFY SCREEN.
      ENDIF.
      IF screen-name = 'LIFNR-LOW' OR screen-name = 'LIFNR-HIGH'.
        screen-input = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDIF.
ENDLOOP.
reward if usefull....

Radio button names disappear in Fields menu

Similar Messages

Maybe you are looking for