Radius acts as if the cert file is login rather then system

I have new lion client macbook trying to authenticate to radius on lion server.
Authentication works fine if you are logged in and will auto connect to the network as you login.
On 10.6 I could the cert in systems so that networked users would have access to the network with out authentication.
This doesn't seem to work now.
The wireless network is only joined if a local user logs in.
Any ideas,
Ben

More details. I tried lowering the security settings on IE 6.0, but that didn't help. I tried turning off Windows Firewall, but that didn't help.
Most applications give me a quick error saying No JRE found in the launch file for this system, but the Web Start error box disappears in just a couple seconds, so I don't even have time to copy the details!
I did find one application for which the Java Web Start Dowload Error stays open long enough for me to copy the details. Here they are. When I try to run Windows Setclock 7.4, I get this on the General tab:
An error occurred while launching/running the application.
Title: Windows SetClock 7.4
Vendor: Canadian Mind Products
Category: Download Error
The application has requested a version of the JRE that is currently not locally installed. Java Web Start was unable to automatically download and install the requested version. This JRE must be installed manually.
Error code 11 (11 Could not locate requested version) returned from server when accessing resource: (http://java.sun.com/products/autodl/j2se, 1.5.0_04)
What could be going on here? Thanks,
Ken

Similar Messages

  • I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

    I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

    Which Fx version? When you uninstalled Fx, did you <b>reboot</b> computer before reinstall?
    Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
    Is your profile in the default location or custom location?
    Have you tried creating a <u>new, <b>completely</b> clean profile</u> - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
    Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

  • When I click on the firefox icon, I get the message "FAiled to read the configuration file. Please contract your system administrator."

    I was using my laptop on a hotel wireless the past couple of days. I returned home and put it back on the docking station. However, I do remember getting this same error message while I was on the hotel wireless. Since IE worked, I didn't worry about it, thinking it had something to do with the hotel wireless. However, now I'm home and it still won't work. I've uninstalled and reinstalled firefox a couple of times - still the same error message. I don't have a "system administrator" to contact - that would be me!

    Are you using a file mozilla.cfg to lock or initialize prefs?
    See:
    *http://kb.mozillazine.org/Locking_preferences

  • Hiccupping/skipping when I play the first file upon login (iTunes 7.0.2)

    When I first logon and play an audio file on iTunes, it hiccups after about two seconds. After that it plays fine, but it's seriously annoying - it makes me think there's something wrong. Has anyone else had this happen to them?
    Thanks for any input.
    MacBook (2 GHz Intel Core 2 Duo, 2 GB 677 MHz)   Mac OS X (10.4.8)   GarageBand & Pro Tools

    I figured out what the problem was.
    My audio interface is what skips. Perhaps it's initializing itself and there's a delay. When I plug straight into my headphone jack, there's no problem. But when I try listening through my audio interface, it skips.
    MacBook (2 GHz Intel Core 2 Duo, 2 GB 677 MHz)   Mac OS X (10.4.8)   GarageBand & Pro Tools

  • Unable to open the downloaded file

    Unable to open the downloaded file:
    Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.1.0 -> for Windows x86 -> File2
    http://www.oracle.com/technetwork/middleware/performance-management/downloads/hyperion-foundation-1112-086772.html
    Error message -
    Cannot open file: it does not appear to be a valid archive. If you download this file, try downloading the file again.
    Tried many a times and used various unzipping tool.

    do not pause the download in the middle of the download.
    with some download software, you can pause/stop the download in middle and continue.it will corrupt the software.
    else in middle the due to network... it may corrupt.
    check/compare the size with the original bytes mentioned in the oracle software download index size matches your downloaded file size.
    try to download it again.
    Good Luck.

  • How can I auto export a PDF File using the "Smallest File Size" preset and set the Exported File Name based on information from an Imported PDF?

    Greetings all,
    I am trying to create a script to automate a PDF export process for my company for inDesign. I’m fairly new to inDesign itself and have no previous experience with javascript, although I did take C++ in high school and have found it helpful in putting this code together.
    We have an inDesign template file and then use the Multi-page PDF importer script to import PDF files. We then have to export two version of each file that we import, then delete the imported file and all of the pages to reset the template. This has to be done for nearly 1000 pdf files each month and is quite tedious. I’m working on automating the process as much as possible. I’ve managed to piece together code that will cleanup the file much quicker and am now trying to automate the PDF exports themselves.
    The files are sent to us as “TRUGLY#####_Client” and need to be exported as “POP#####_Client_Date-Range_North/South.pdf”
    For example, TRUGLY12345_Client needs to be exported as POP12345_Client_Mar01-Mar31_North and POP12345_Client_Mar01-Mar31_South.
    There are two templates built into the template file for the north and south file that are toggled easily via layer visibility switches. I need to get a code that can ideally read the #s from the imported Trugly file as well as the Client and input those into variables to use when exporting. The date range is found in the same place in the top right of each pdf file. I am not sure if this can be read somehow or if it will have to be input manually. I can put North or South into the file name based on which template layer is visible.
    I am not sure how to go about doing this. I did find the following code for exporting to PDF with preset but it requires me to select a preset and then type the full file name. How can I set it to automatically use the “Smallest File Size” preset without prompting me to choose and then automatically input some or preferably all of the file name automatically? (If the entire filename is possible then I don’t even want a prompt to appear so it will be fully automated!)
    PDF Export Code (Originally from here: Simple PDF Export with Preset selection | IndiSnip [InDesign® Snippets]):
    var myPresets = app.pdfExportPresets.everyItem().name;
    myPresets.unshift("- Select Preset -");
    var myWin = new Window('dialog', 'PDF Export Presets');
    myWin.orientation = 'row';
    with(myWin){
        myWin.sText = add('statictext', undefined, 'Select PDF Export preset:');
        myWin.myPDFExport = add('dropdownlist',undefined,undefined,{items:myPresets});
        myWin.myPDFExport.selection = 0;
        myWin.btnOK = add('button', undefined, 'OK');
    myWin.center();
    var myWindow = myWin.show();
    if(myWindow == true && myWin.myPDFExport.selection.index != 0){
        var myPreset = app.pdfExportPresets.item(String(myWin.myPDFExport.selection));
        myFile = File(File.saveDialog("Save file with preset: " + myPreset.name,"PDF files: *.pdf"));
        if(myFile != null){
            app.activeDocument.exportFile(ExportFormat.PDF_TYPE, myFile, false, myPreset);
        }else{
            alert("No File selected");
    }else{
        alert("No PDF Preset selected");
    So far my code does the following:
    1) Runs the Multi-Page PDF Import Script
    2) Runs PDF Export Script Above
    3) Toggles the Template
    4) Runs #2 Again
    5) Deletes the imported PDF and all pages and toggles template again.
    It’s close and much better than the original process which was almost 100% manual but I’d like to remove the Preset prompt from the PDF script and have it automatically select the “Smallest File Size” preset. and then if there’s a way to have it auto-fill in the file name so no user input is required at all other than selecting each file to import. (If there’s a way to setup a batch action for the multi-import script that would be even better!)
    Thanks in advance and if there’s anything else I can provide that would help please let me know! Even a nudge in the right direction will be a big help!

    If you hold down the option key, it will typically show the location. Or you can often hit option-return on the file and it will reveal the file in the Finder, instead of opening it.
    Final option is to open it, and just option-click the filename in the toolbar of Preview and it should show you the location.
    It's probably an attachment to an email you've received. If you have Mail set to cache emails and their attachments it'll be stashed in a subdirectory of ~/Library/Mail. Which is fine.

  • Two users opened the same file at the same time with file on Win2K Server

    I just had a problem with a file that could not be saved. After a little investigation I discovered that two users had the same file open at the same time. This is with both users using InDesign CS2 and saving to a Windows 2000 Server. Any ideas how this even happened? The only thing I can think of is if they both opened the file at the exact same time but even that I doubt. I guess the more likely possibility is that the user on 10.5 (which we have had a lot of problems with, it's hard to tell how many of them are CS3 problems (yes CS3) and how many are Windows 2003 Server problems) had InDesign CS2 flake out and not tell her the file was open. Has anybody else seen this? The other user was using 10.4. Both computers have the most recent updates for the OS and for their various adobe products.

    I have videos on mov file and my quick time player does not play them.
    The MOV file container is the generic QT file container. Any audio and video data compatible with the computer system used to create the file can be placed in the MOV file container. Unfortunate, other systems cannot play the file unless they too are configured with the same components as those used to create the file. The normal procedure here is to use the Finder "Info" or alternative media play "Inspector" window to determine what codecs were used to create the original file and, if they are available for your Mac, install them on your system for playback use. Also be advised that some "legacy" codecs may require playback in the QT 7 Player for proper QT support.
    I opened with other players, there is no sound. Then I opened the same file on my windows 7, it plays perfectly with the sound and everything? What is the problem?
    This would indicate these players either access your QT codec component configuration which does not include the required codec or the app has its own built-in codec support which does not include the required audio codec but you Windows 7 media player is configured with the required codec support. This may incidate the use of a really old codecs that may or may not be available/supported on a Mac any longer.

  • After installing iTunes 10.5 update i get the following message when trying to play any song in my Library "The song could not be used because the original file could not be found. Would you like to locate it?"  how do i fix this??

    I have an iPod Classic and work on Windows 7.
    i recently installed iTunes 10.5 update and since then i cannot play any of the songs in the Library - i get the following message
    "The song could not be used because the original file could not be found.  Would you like to locate it?"
    what happened to all my songs (almost 2000) How can i get them back into my music library?
    Please help - i do not want to spend another week downloading all my cd's onto my computer !!!!!

    Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
    tt2

  • Problem while including the header file in C source code in CIN

    While Creating code interface node....
    In the C source code we are supposed to include the Header file "extcode.h".In my system i have installed
    Turbo C. I couldn't able to find the above header files.When i am trying to use the above header file i am getting error,what could be the reason

    Hi,
    You need to point your turbo C to ..\labview\cintools which is where you will find the extcode.h and other h file and also the lib file.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Saving the XML File  in Unix Filesystem

    Hello,
    Please let me know,
    1) i have generated a XML File,  Is there any Function Module to save the  XML file  in Unix File System .
    2) How to send the XML file to a NON-SAP System using FTP Transfer .
    Regards,
    jvs
    Edited by: jvsvijay on Dec 6, 2011 9:51 AM
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on Dec 6, 2011 2:23 PM

    Hi,
    What I have done in the past, and seems to work, is execute an Interface or Procedure in simulate mode, choosing the agent that you would like to use in reverse engineering the XML. Then, attempt to reverse engineer the file again. Not sure if this will work, but it has for me at times. You might also try this and restarting ODI to clear out anything 'cached' in the JVM.
    It seems ODI is caching the agent that you are using - but I'm not sure how to properly change it.
    Regards,
    Michael Rainey

  • How to put the ".class" file in Memory with Javac?

    The J2SE 6 RC have an tool : javax.tools.JavaComplier. I can use it to compile the source code in memory( I implemented an JavaFileObject).
    But the compiler aways put the output file(.class) to file system. It;s not my want to do . I am writing an IDE ,I use javac to determine the code error after the user's typing. So complier is used a lot , writing to file system is a time consuming job.
    I also want to use the byte code(".class" file) for reflection , so if the JavaCompiler can put the output file in memory and then I can reflect it.
    My current solution is puting the output file to file system then use Class.forName() to reload it in memory then reflect it. It seems a useless IO operation with file system.
    How can I do with it?
    Thanks!

    Those 'useless' I/O operations are one or two out of thousands that are implied by compiling a Java source file.
    I wouldn't worry about it.

  • Can't open Flash Builder - "See the log file" error.

    I have been using Flash Builder 4.5 and for some reason it has stopped opening correctly - I get the following error then it just shuts down.... :
    "An error has occured. See the log file."
    and if i check the log file it refers to then i see the following text:
    !SESSION 2011-06-22 13:53:43.658 -----------------------------------------------
    eclipse.buildId=M20100909-0800
    java.version=1.6.0_16
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    Command-line arguments:  -os win32 -ws win32 -arch x86
    !ENTRY org.eclipse.osgi 4 0 2011-06-22 13:53:59.598
    !MESSAGE Application error
    !STACK 1
    org.eclipse.swt.SWTError: No more handles
        at org.eclipse.swt.SWT.error(SWT.java:4109)
        at org.eclipse.swt.SWT.error(SWT.java:3998)
        at org.eclipse.swt.SWT.error(SWT.java:3969)
        at org.eclipse.swt.widgets.Widget.error(Widget.java:468)
        at org.eclipse.swt.widgets.Control.createHandle(Control.java:633)
        at org.eclipse.swt.widgets.Composite.createHandle(Composite.java:305)
        at org.eclipse.swt.widgets.Control.createWidget(Control.java:649)
        at org.eclipse.swt.widgets.Scrollable.createWidget(Scrollable.java:134)
        at org.eclipse.swt.widgets.Control.<init>(Control.java:110)
        at org.eclipse.swt.widgets.Scrollable.<init>(Scrollable.java:75)
        at org.eclipse.swt.widgets.Composite.<init>(Composite.java:95)
        at org.eclipse.ui.splash.BasicSplashHandler.getBundleProgressMonitor(BasicSplashHandler.java :159)
        at org.eclipse.ui.splash.BasicSplashHandler.getContent(BasicSplashHandler.java:265)
        at org.eclipse.ui.internal.splash.EclipseSplashHandler.init(EclipseSplashHandler.java:86)
        at org.eclipse.ui.internal.Workbench$8.run(Workbench.java:782)
        at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
        at org.eclipse.ui.internal.Workbench.createSplashWrapper(Workbench.java:798)
        at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2467)
        at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
        at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
        at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
        at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
        at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
        at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
        at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619)
        at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574)
        at org.eclipse.equinox.launcher.Main.run(Main.java:1407)
    This is incredably frustrating as you can imagine as it effectively means i cant work anymore, it is clearly some kind of problem with eclipse but i have no idea what.
    I have tried re-installing Flash Builder twice and no luck.
    Can anyone help with this???
    Thanks !!!!
    Elliot.

    There is a similar thread with exact same stackstrace and problmes reported with earlier verison of FB. You can check it here http://forums.adobe.com/thread/832073. Thre is also representation of Adobe engineers on this thread. Aprarenlty there are certain updates(Eclipse / java) that FB doen't encourage, post FB is installed in stanadlone mode and workarounds are suggested on this thread to overcome this problem. If you are workign in plugin environment with FB, I guess updates are not affecting FB installtion. Please try out the solutions presented on this thread and let us know.

  • When I open iTunes on my new computer using the .itl file, and using the same external drive holding the songs, all of the songs I added to iTunes up to a certain date have broken links, while none of the songs have broken links on the old computer.

    I want to open the  iTunes library on my new laptop with all the playlists and stuff I built on the old computer. I have all my music on an external drive. I have copied the .itl file from the old computer and opened it on the laptop, and it has all the playlists, but all of the songs that were added to iTunes up to a certain date have broken links. What am I doing wrong?

    Moving library files around while leaving the data in the same place usually presents no problems. Moving the data around independently from the library usually breaks things. With Windows machines all you should need to do is make sure that the same drive letter is being used on the new system as with the old. If that is not possible you need to get your library into a portable layout before moving it between systems.
    Typical layout of iTunes folders:
    When the media folder is inside the main iTunes folder as shown above then the library is portable. Typically with a split library the iTunes Music or iTunes Media folder (everything inside the red outline) is moved to a different drive by choosing a new locaton for it and then consolidating.
    To make the library portable again you need to copy the library files and album artwork folder into the parent folder of the media folder so that the nested relationship is recreated. (BTW If your media isn't already inside your designated media folder then you will also need to consolidate the files that are outside of it, before you copy the library files.) You can then use the hold-down-shift-when-starting-iTunes method to open the library file in that parent folder. Once the library has been opened, tested and closed you are most of the way there.
    The iTunes window inherits its title from the folder holding the library files so, unless you created a folder called iTunes to hold the media folder, iTunes may now have an unexpected title when you run it. The parent folder can be renamed as iTunes, and the library opened again. Alternatively, if the parent folder is at the root of the drive, or has other data which you wish to leave in place, you can create a new top level folder called iTunes and move the library files, album artwork and media folders into it before opening and testing the library again.
    If the library doesn't work after any step simply reverse it by undoing a move or rename or opening the previous set iTunes Library.itl file.
    If all has gone well then the library is now portable. Once you've migrated the data to a new system you can copy the library files back to their usual internal location if you find that having them on the external drive affects performance...
    tt2

  • Problem with the field length restrictions in the WSDL file

    Hi all,
    We have created a XSD file where we have defined fields and given some restrictions (like minLength, maxLength) for each field. See below one ex of one element "Id":
    {code     <xs:simpleType name="Id">
              <xs:restriction base="xs:string">
                   <xs:maxLength value="40"/>
              </xs:restriction>
         </xs:simpleType>
    {code}
    Here we have defined maxLength of this field as 40 chars. Our WSDL uses (refers/import) this XSD file and we ganerates java skeleton using RAD. But at runtime if we set more than 40 chars then also it is accepting. It is not throwing an exception. (In the generated java skeletion these restrictions are not reflected antwhere)
    I have one question that, if such restrictions defined in the XSD file works or not? and is it a industry standard to define restriction in the XSD file?
    If yes then what i need to do more to make it working?
    If not then is there any way to do such validation of the fields that are input to the webservice? Or shall i have to just write my own java class to validate each field?
    Regards,
    Ravi

    Or is it possible that we give length restrictions in the XSD (and import this XSD in WSDL) and generate java skeleton from WSDL then the restrictions defined in XSD are mapped into java classes?
    For ex:
    <xs:simpleType name="Id">
        <xs:restriction base="xs:string">
            <xs:maxLength value="40"/>
        </xs:restriction>
    </xs:simpleType>so when in generated java skeleton we set value to "Id" element which is more than 40 charsthen it should throw a exception?
    Is it possible by default or do we need to write custom validation classes to do validations on such fields?
    Has anybody worked in such scenerios?
    Or how to do field validations in webservice? Simple question.
    Thanks In Advance.

  • When converting a .pptx file of 6MB to .pdf, the file size ballooned to 25MB. The original file was created on a PC. What happened? Why? How to fix? Thx.

    When converting a .pptx file of 6MB to .pdf, the file size ballooned to 25MB. The original file was created on a PC. What happened? Why? How to fix? Thx.

    gssharpe wrote:
    What happened?
    Nothing much. Different formats.
    How to fix?
    Try editing the original file. Resample pics to a lower resolution, check out other graphics, check table borders (eliminate any dotted lines or borders), check font usage. When generating PDF, try Save As (instead of Print > Save As), although I don't expect that'll make much difference.
    Next, open the PDF in Preview, choose File > Save As, choose Format: PDF, Quartz Filterz: Reduce File Size. If that isn't enough, you can use ColorSync Utility to duplicate the Reduce File Size filter, and then edit it for a more aggressive size reduction. But keep in mind that size reduction means lower quality.

Maybe you are looking for

  • Error while loading master data text

    Hi all, I have scheduled my first load into Production for a text datasource which still shows as running but when I looked into the Details tab I found the below error: Transfer (IDocs and TRFC): Errors occured   - Request IDoc : Application documen

  • Create GR using BBP_PD_CONF_CREATE

    Hi Experts I have a requirement in which I have to automatically create GR from PO. For this I have created an FM. In this FM I first call BBP_CF_ASSIGNMENT and then map the header structure(without the dummy guid as it gives error in the BBP_PD_CONF

  • Laser Jet 3050 not printing receipt

    Sending a fax, does not print a receipt so I know it went through. Checked the manual but no obvious answer. Went through all the menu items but no luck. Anyone have an idea?

  • Purchase Orders Outputs

    Hi SDN, I need to change the print program for Purchase Order to pick a new SAP Script for Letter Size print. The Program I see in NACE for output type is SAPFM06P. The script that is running currently shows SAPLMEDRUCK. Things are running fine. I wa

  • SAP DB high utilization prob / bcoz of customized Z reports

    Dear All, We are facing sap system slow problem. our observation as below AL08 - pick time no of user login 226 SM12 - shows EKKO , MARC , MBEW getting lock unlock. al08 - shows customized zreports 16 to 17 running at a time. and bcoz of that high ut