RAR Management view tables

Hi Experts,
We need to delete old logs for all sync jobs, batch risk analysis and management view data from RAR. Initially we had run all jobs for all roles but management requirement is that it should show only customer roles. Although we can anytime run new risk analysis but in managemnt view it will show old data also and comparison etc will be confusing to some users.
Please suggest if there is any workaround to remove old data. If we need ot delete at table level, which tables data need ot be cleared to make sure no old data remains till date.
Thanks in advance.
Sabita

Hi Chinmaya,
Thank you so much for your reply.
Are you going to upgrade to SAP GRC AC SP13 ( I am bit confused).
Thanks in advance.
Regards
Poojagopal
Edited by: POOJAGOPAL on Jun 3, 2011 8:20 PM

Similar Messages

  • GRC-AC 5.3 RAR Management view error - Expired users not cleaned-up.

    Hello Gurus,
    I have a problem in RAR Management View:  Users who was valid have been analyzed and their conflicts considered in statistics, but when they become expired, their conflicts remain in the statistics forever, because they are not re-analyzed neither in Full nor in Incremental sync.    Even if all roles are removed from the user in backend, the conflicts remain in Management View.
    I think the Full Batch Risk Analysis should clean-up all users violations from current period statistics before recording the new analysis results. 
    Did you have this problem too?  Am I missing something? 
    I appreciate your thoughts about it.
    Vaner

    Hello Nuno,
    Thanks for your comments.
    My release is 5.3 SP 16.2.
    I also think the full sync should be enough but I already find about 20 users with problems, in 4 different backend and in 2 GRC (Tests and Production)
    I think that depending on some procedures done in the back-end the full sync do neither re-analyze the user nor clean-up previuos statistics, for example:
    1. A user was delete and recreated again with option to maintain old data, and he already had expiration date.
    2. A sand-box environment was created as copy of production, users were created valid but already with expiration date.
    I observed that for these scenarios, there was no Change Document for field "valid to", my guess is that Full Sync process relies on Change Documents to do its job.
    I already opened a message in SAP for this, first level could not solve it, It is in Development Team now.
    Vaner

  • RAR - management view - Role Analysis diagram shows zero

    Hello,
    we were able to run the Full Sync for role/user/role and Batch Risk Analysis user/Role/Profile and Critical Acess to completion successfully.
    In the Informer tab, Managerment View, the risk Violations and Users Analysis shows reasonable figures. However the Role Analysis , it shows zeros for the risk violations and risk violations for user and roles.
    Could someone point out where is likely the problem so i could go and check ?
    Thanks
    CL

    Hi Lee,
    Have you run Management Report Job as well?
    Regards,
    Sabita

  • I Want manage cluster table view . I control this  table

    Hi Abaper ;
    I Want manage cluster table view . I control this  table ( which cell change or delete or add  ) I use total internal table ( creating by system ) but total table has a line and some data is incorrect .
    for example :
    in database data :
                                term      stundet_name          lesson_id          lesson_name    
                                2005          ahmet                       1                  Matematik
                                2005          yasin                        2                      Tarih
    I view data   
                                term      stundet_name          lesson_id          lesson_name    
                                2001          ahmet                       1                  Matematik
                                2001          yasin                        2                      Tarih
    (term data false)

    Hi Turgut
    Check this out ; I dont try but maybe useful for you.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a1/e4521aa2f511d1a5630000e82deaaa/content.htm

  • Reg : Material warehouse management view 1 & 2

    Hello All,
    Using a Z-programI am extending the warehouse managemnt view for a single Plant, the view gets created successfully. But some how an Inactive version of Warehouse management view gets created for other plant also. How we can prevent the creation of this inactive view creation.
    Please let me know your suggestion.
    Regards,
    Ravi Kasale.

    from Note 545626 - FAQ: Data transfer problems:
    Read the explanations in OSS Note 67616.
    Bear in mind that, in the structure/table HEADDATA, the for BAPI methods StandardMaterial.SaveData (BAPI_MATERIAL_SAVEDATA) and StandardMaterial.SaveReplica (BAPI_MATERIAL_SAVEREPLICA) of the business object BUS1001006, you can select the required views and these correspond to the respective maintenance status.
    In the segment E1MARAM of the MATMAS IDocs, you can assign the overall maintenance status in the field VPSTA.
    Edited by: Jürgen L. on Jun 6, 2011 4:01 PM

  • ERROR VIRSA CC 5.2 - Management View -User Analisys - NOT UPDATED!!!!!

    Hi ,
    i executed the JOB of SYNK of users,  the Job of RISK analysis and the JOB of update of management Report .
    When i go in - Management View - User Analisys -( i select date , System , User Group ) Virsa CC shows me the correct number of users actually in the system, for this user group , according to USR02 SAP table , BUT Users with NO Violations and Users With Violations are not correct.
    I show results:
    No. of Users Analyzed : 25                CORRECT
    Users with no Violations : 95 379%     NOT CORRECT
    Users with Violations : -70 -279%        NOT CORRECT
    The Interactive pie chart shows the correct number of users with violations : 2
    Who it' s possible ?
    BEST REGARDS
    Maurizio

    Abdul,
    You stated in your initial comment that the Management Report check box was NOT selected? If this is the case then the graphs on the informer tab have not been updated. You must first execute the SOD (user/role/profile) analysis, once that job is complete then execute a separate job for the management reports. This will then update the informer tab (given that your rule set has been updated with your custom functions and risks).

  • Workspace manager view

    Is there an easy out of the box solution for creating a "manager" view of tasks within Workspace?  The requirement is for a user to log in and search all tasks regardless of whether or not they interacted with that task (by default the search templates only show tasks which were assigned to you at some point).  I know you could share the individual queues but this gets cumbersome when a manager looks after a lot of employees.

    You could also create a group for each user that also contains the manager. This could be done programatically. If the user claimed the task, it would no longer be in the queue. It would not prove any work was done. A flaky thing is even if the user's queue is shared to the manager, the manager will not be able to see the item in the user's queue after being claimed.
    I solve the manager review requirement by calling a logging sub process between each step. It writes to a separate table. The Manager logs into a Flex dashboard to review the data and slice up multiple ways. Certain workflow steps may have multiple business process steps. For those, the user sets a status in a drop down before clicking complete. The process is routed to logging then back to the same user step unless the status has been set to the one that exits the loop.

  • View Table Data

    I apologize in advance if this question is obvious - I am new to JDeveloper.
    In JDeveloper 9.x, I recall the ability to connect to an Oracle database and view the data in a table via a "Data" tab in the Connection Manager.
    Since then, I've installed JDeveloper 10 on a new computer, but find this "Data" tab is no longer available.
    How do I now view table data in JDeveloper?
    I see many tutorials on viewing data from new application. However, I simply want to examine the table data, not develop a new application.

    Assuming you are using JDeveloper 10.1.3 - when you double click a table in the database browser a window that shows it's stucture will be open.
    Look at the bottom of this window and you'll find the data tab.

  • Is application to view tables and relationships?

    Hi for all?
    I'm beginner DBA. I don't find apllications to view tables and relationships!

    Hello PraveenSastry,
    >> When I connect to the Database using Server Explorer and select "New Query" from the options…
    From your description, it is not very clear to know what happens, if you could share a screenshot, we can understand this issue more clearly.
    By the way, it seems that you are developing with Data Designer Extensibility (DDEX) SDK, I suggest that you could post VSX related issue to
    this forum, the current forum is for issues regrding ADO.NET managed providers, especially System.Data.SqlClient, System.Data.Odbc and System.Data.Oledb.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Creating a Maintenance View Table on SE11

    Hi, Experts.  I want to create a Maintenance View Table on SE11 (View option on SE11 and then selecting Maintenance view from the View Type List).  Is there anyone who have a document that will be able to help me create this table or pointers that will help me.
    Thanks for your help.
    Regards

    hi,
    steps are
    Goto SE 11.
    Choose the radio button of Views, give the view name and create.
    Enter the short description and table names for which u want to create view.
    Select the 2nd table-name field and click on relationship button.
    Then goto view fields tab.
    Select the table name and the fields u want to display.
    Save and activate.
    please see this
    steps  to create a view

  • Hiding fields in standard user management view

    Hi all,
    How to hide fields in user management views.
    Like in the create user view, suppose I want to hide the <b>additional information fieldgroup</b>. how can I do it?
    I have the par file and tried to comment the code which is related to the additional information field group. But when we try creating an iview from the new par(modified par-i changed changed the name ) I do not c the portal component called <b>create user</b>. I am a bit confused.
    Can anyone help me out regarding this.
    thanks,
    Paul

    Hi Paul
    Have a look at
    http://help.sap.com/saphelp_webas630/helpdata/en/d1/956f8b86b2a949913ed22d253e0012/content.htm
    and http://help.sap.com/saphelp_webas630/helpdata/en/91/646d498fd94142a37e90a3b848e45e/content.htm
    By setting the default values you can either have them displayed or hidden.
    Hope this helps,
    Regards
    Uma.

  • MVC: Create a view which populates two (or more) joined tables in a single view table

    I am beginner in MVC and I would like to create a view which populates two (or more) joined tables in a single view table as described below.
    I have two tables:
    1 - Bloggers: - bloggerID (int);
                        - bloggerName (string)
    2 - Blogs: - blogID (int);
    bloggerID (int);
                    - blogTitle (string);
                    - blogImage (string)
    A blogger can have one or more blogs while one blog must be related to only one blogger.
    I would like to have a view table on my webpage as the following:
    Blogger Name
    Blog Title
    Blog Image
    Noris Gang
    Virus
    virus.jpg
    Noris Gang
    Desktops
    desktop.jpg
    Gauthier
    Books
    books.png
    John Leon
    NNNMHJhjdhj
    Nmbj.jpg
    I'm using MVC 4 (or at least 3).
    Thanks for your help.

    Hello,
    From your description, it is not very clear that what you mean about the View, if it means the View concept in database as SQL Server, your required view should be as below:
    Create view
    as
    Select Bloggers.bloggerName, Bloggers.blogTitle, Bloggers.blogImage
    From Bloggers join Blogs on Bloggers.bloggerID = Blogs. bloggerID
    If it means the UI view in MVC concept, I suggest you could ask it on the MVC forum:
    http://forums.asp.net/1146.aspx
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Create Quality Management view for a Material in background mode

    I want to know if there is a way to create a Quality Management View (Quality Management tab) on Material Master (material already extended to plant ) in background mode.
    The requirement is to add inspection setup data for a material extended to a particular plant in background. I tried using 'BAPI_MATINSPCTRL_SAVEREPLICA' to add the data and it works perfect as required. Now the problem is this BAPI is creating the inspection setup data only for the material which has QM tab in MM02 for e.g. I manually created the inspection setup for a Material from MM01 and then deleted it , now the BAPI works fine for this material because when I created an inspection setup from MM01 it created the QM tab and after i deleted the entry the tab was still there with no entry in inspection setup.
    I want to create inspection setup for a material which does not have QM tab.
    I have to create everything is background mode. BDC is one option which I am list interested in.
    Thank you for helping in advance.

    Thank you for looking into my issue. I have to do the inspection setup in background without using any front end transaction.

  • How to edit data from a "View Table"?

    I am importing data from a "table view" where in sql it joins several tables into one view. When I passed it in using the template it doesnt have the "Edit command column" like other direct link tables. Is there anyway I could make a view table editable? Can I manually try to do it or I have to edit the individual ables? thanks

    oh sorry about that.The "template" I mean in HTMLDB when I start building a new application I used "Based on existing tables" method and with single tables it generates everything fine with search fields and edit column to the left. I have a table view that combines about 4 tables together and I used the same template (Based on existing tables) and it has the search and create but it doesnt have the "edit" column on the left. Is there a way I can edit the view table's information so that the other tables that the view combines will be updated/edited?
    The reason is that lets say I dont know this person's ID number but I know his name. I search for his name on table A and it returns some general data including his ID number. Instead of going to another Table B with the person's ID number and edit that table I really want to see the information just from one search (Table A)- if a global search can be implemented that would be great too. Thanks Sergio.

  • Error in creating Transport Request for a view table

    Hello all,
    I have an ECC IDES 6.0 system named EC1 and another one which is ECC EhP4 IDES named EA1 which I have just installed.
    One of my requesters has a view table named ZVAITM_TBLE in EC1 and she wants it to be transported to EA1.
    So I created a workbench transport in SE10 and included the following:
    PgmID = R3TR
    Obj = VDAT
    Object name = ZVAITM_TBLE
    But when I press enter, I encountered the following error:
    No object definition exists for Customizing object ZVAITM_TBLE
    Message no. TK427
    Diagnosis
    The Customizing object R3TR VDAT ZVAITM_TBLE is not defined in the tables of the Change and Transport System.
    This means that you cannot use the Transport Organizer to edit it.
    System Response
    The function terminates.
    Procedure
    First check whether the name of the object is correct. Then you (or the system administrator) should check the object definition, to ensure that the object was created correctly (transaction SOBJ).
    If the object does not exist, then create it or delete it from the request/task.
    I am new to transports so I have no idea how to proceed.
    Please advise.
    Thanks a lot!
    Cha Cha

    Hello Cha,
    Kindly open this custom table using SM30 and try creating a transport request from there.
    Regards
    Vivek

Maybe you are looking for