Re: Changes to screen field date was not updated

Hi,
I had a dialog screen showing a valid from date as 10.10.2007. I changed it to 15.10.2007 and click on other details tab. when I returned, it is still showing the old values.
When I did a DEBUG, upon changing and hitting enter key, the new dates for the screen field is not changed. it is still showing the old date for the screen field.
why is it so?
I think this is the cause of why the old values is still displaying. How can I get the field updated to my internal table. It need to be filled with the new values before I can updated to my internal table and then re-displayed again.
How to get the new values into the screen field?

Hi..
As i understatnd this field is in TABLE Control.
In that case you must Update the Internal table in the PAI .. Inside LOOP .. ENDLOOP.
Process After Input.
LOOP AT ITAB.
   Module Update_itab. "Calling the module
ENDLOOP.
<b>In Module pool</b>
   Module Update_itab INPUT.
    modify itab from wa index TABCON-CURRENT_LINE.
   ENDMODULE.
Note: Here WA is the work area of the Screen fields and TABCON is the Table control variable.
<b>Reward if Helpful.</b>

Similar Messages

Hi. My phone screen broke and I had it replaced from a phone shop. The guy said that while changing the screen and phone was blocked. It is now disabled for like 23,000,000 minutes and I can't restore it cause I dont have all the data sync to my computer.

Hi. My phone screen broke and I had it replaced from a phone shop. The guy said that while changing the screen and phone was blocked. It is now disabled for like 23,000,000 minutes and I can't restore it cause I dont have all the data sync to my computer. Is there anything I can do or can Apple do something if I give them the correct password?

As you had the iPhone opened by an unauthorised repairer ( Apple do not replace screens on iPhone 4)
Apple will not provide any service or support
Take it back to the "phoneShop" and tell them to fix it
You have no other alternatives
or try this
http://support.apple.com/kb/HT1212

Service po created with reference to preq , in po some fields data was miss

i was created preq with item type D and account assignment category = network , uploading point data and recipient data.
after that i was created po with reference to that preq , in that po uploading field , recipient field data was missing , how to get that data in service po

Hi,
In service documents and blanket PO's the "goods recipient" can not
be used. Please read the information from the note 118008:
The system does not display the goods recipient and unloading point
fields in the account assignment block for a service line even though
they are set as input fields in Customizing.
You cannot display fields 'Unloading Point' and/or 'Goods Recipient' in
the R/3 system. The reason for this is that every account assignment
object for each service specification can have several unloading points
and/or goods recipients.
In particular, only one cumulation for each account assignment object is
possible and useful at purchase order item level.
As of Release 4.0, user fields are available in external services
management.
You can name these user fields, for example, 'Unloading Point' and
'Goods Recipient'.
A user field belongs to the service line and is purely informative.
Regards,
Edit

Oracle ADF Form Data was Not adding to DB.

I have Created a Query Based VO(I have given Updatable:Always and i ahve checked in source that IsUpdateable="true"),and added that to AM,I Have created a ADF Form with CreateInsert Operation,When Click on CreateInsert Button It was creating an empty form,
After Entering the Date into that empty field, when i click on Commit button Data is Not Saving into DB.
After that,
I have Creted a Readonly Table With Same Iterator,When i click on "Commit" it was sowing that data is adding to the New Row in that Readonly Table,But when i was checking in DB ,The Data was not adding to DB
i am useing 11.1.2.3.0 version jdeveloper.
Any Help is appreciable.....
Edited by: Rajashekar Thippireddy on Feb 4, 2013 8:47 AM

You are conceptually wrong. A query-based VO does not insert/update/delete any data to DB. You must create an entity-based VO if you want to insert/update/delete data to DB.
When you issue a commit operation on an AM, it looks for created/modified/removed Entity objects and then performs the corresponding DML operations on DB. (In fact, DML operations are performed by Entity objects. If there are no Entity objects, then there are no DML operations). If your VO is not entity-based (but query-based), then you do not have any created/modified/removed ADF entities, so there is noting to flush to DB.
The "Updateable" property of the VO attributes controls whether the VO should allow data entry/modification of these attributes in memory. You can have non-entity based attributes that are marked as "updateable" (for example, transient attributes storing temporary values in memory) but it does not mean that these attributes are going to be flushed to DB.
You have seen data in the read-only table, because it is based on the same VO and it displays the newly-created row which is in memory.
Dimitar
Edited by: Dimitar Dimitrov on Feb 4, 2013 7:00 PM

Could not automatically scale X because monitoring data was not found

I have never been able to get Auto-Scaling by CPU to work. I have created new cloud services, waited days before setting it up, but this warning always gets generated when it tries to scale:
Could not automatically scale XXX because monitoring data was not found
The cpu data displays on the monitoring tab and the auto scale configuration screen.

Hi wikek,
Thanks for your posting!
Is your question similar with this post(http://stackoverflow.com/q/19730570 )? I am not sure but it is possible that the cloud service and VM has had maintainence on yesterday, please see this comment form
Azure dashboard (http://azure.microsoft.com/en-us/status/#history ):
Starting at 2nd Sep, 22:18 PM UTC to 3rd Sep, 03:45 AM UTC, a very limited subset of customers using Cloud Services and Virtual Machines in West US may have experienced intermittent errors or timeouts when attempting to access services. The issue was
intermittent, and customers would likely have been successful when retrying a request. Engineers have validated that full service availability has been restored to our West US customers. This incident is now mitigated.
It could leverage the VM or Cloud service performances. And I suggest you can contact with azure support to resolve this issue.
http://www.windowsazure.com/en-us/support/contact/
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Popularity trend/usage report is not working in sp2013. Data was not being processed to EVENT STORE folder which was present under the Analytics_GUID folder.

Hi
I am working in a sharepoint migration project. We have migrated one SharePoint project from moss2007 to sp2013. Issue is when we are clicking on Popularity trend > usage report, it is throwing an error.
Issue: The data was not being processed to EVENT STORE folder which was present under the
Analytics_GUID folder. Also data was not present in the Analytical Store database.
In log viewer I have found the bellow error.
HIGH -
SearchServiceApplicationProxy::GetAnalyticsEventTypeDefinitions--Error occured: System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly
secured fault was received from the other party.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
HIGH - Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly secured fault was received from the other party.
CRITICAL - A failure was reported when trying to invoke a service application:
EndpointFailure Process Name: w3wp Process ID: 13960 AppDomain Name: /LM/W3SVC/767692721/ROOT-1-130480636828071139 AppDomain ID: 2 Service Application Uri: urn:schemas-microsoft-
UNEXPECTED - Could not retrieve analytics event definitions for
https://XXX System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
I have verified few things in server which are mentioned below
Two timer jobs (Microsoft SharePoint Foundation Usage Data Processing, Microsoft SharePoint Foundation Usage Data Import) are running fine.
APPFabric Caching service has been started.
Analytics_GUID folder has been
shared with
WSS_ADMIN_WPG and WSS_WPG and Read/Write access was granted
.usage files are getting created and also the temporary(.tmp) file has been created.
uasage logging database for uasage data being transported. The data is available.
Please provide pointers on what needs to be done.

Hi Nabhendu,
According to your description, my understanding is that you could not use popularity trend after you migrated SharePoint 2007 to SharePoint 2013.
In SharePoint 2013, the analytics functionality is a part of the search component. There is an article for troubleshooting SharePoint 2013 Web Analytics, please take a look at:
Troubleshooting SharePoint 2013 Web Analytics
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.U8NyA_kabp4
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

The change to a different font was not done because the chosen font and the font encodings in the do

Hi,
I created a PDF from a Word document that used Cambria font, and when I select it in Acrobat to try to change the font I get "The change to a different font was not done because the chosen font and the font encodings in the document differ and could not be resolved"
How can I change the font and why is it preventing me from doing so?
Thanks,
Juan

Juan,
No, Acrobat is not a word processor.
More to the point Acrobat lets one "work" PDF and PDF is not a file format designed as a word processing, editing, formating, or page layout file format.
PDF is, essentially, a "final destination" format.
What it is is described in the ISO Standard for PDF (ISO 32000-1).
Be well...

HT4623 My ipad was not updated since the 5.1 and now when I go to update to IOS 7 it states that my ipad is up to date.

My ipad was not updated since the 5.1 and now when I go to update to IOS 7 it states that my ipad is up to date. Please advise how to update from here.

TheQuestionaire wrote:
My ipad was not updated since the 5.1 ...
Sounds like yours could be an iPad 1.
If so... iOS 5.1.1 is as far as it goes.

AP_INVOICE_DISTRIBUTIONS_ALL.LAST_UPDATE_DATE was not updated

Hi,
I would like to raise one question on AP_INVOICE_DISTRIBUTIONS_ALL.LAST_UPDATE_DATE of EBS 11.5.10 which is related to OBI Application 7.9.6.1
One customer mentioned that AP_INVOICE_DISTRIBUTIONS_ALL.LAST_UPDATE_DATE was not updated whenever AP_INVOICE_DISTRIBUTIONS_ALL.PREPAY_AMOUNT_REMAINING filed is updated.
In reverse, I asked customer if it is expected in EBS 11.5.10 because I understand that LAST_UPDATE_DATE field is mandatory updated whenever any column is changed.
"1/ Basically, AP_INVOICE_DISTRIBUTIONS_ALL.LAST_UPDATE_DATE field is mandatory updated whenever any column is changed. If not, it must be a Source Application problem. Why do your Source Application person think that it is expected?
Ans: Because Source Application person think that Oracle apps basic application functionality for AP Invoice."
Could you let me know if it is really expected in EBS 11.5.10 or any other suggestions?
Regards,
ChongHak

If the last_update_date is not updated when another column in the table is updated, it is most likely a bug in EBS.
You should search metalink for a patch or raise an SR to obtain one.
Hope this helps,
Sandeep Gandhi

Idoc Receiver - Header Data does not update

Hi there
I have an Idoc receiver in a scenario where I send a Idoc from a file to the R/3 system. My config is all fine but the Idoc status in we19 shows red. My Header data for the idoc is incorrect. The idoc is WALREQ01. In my Message Mapping Im setting the SDNPOR, SDNPRT, SDNPRN, RCVPOR, RCVPRN to the correct values and the I activate the scenario but in we19 it still shows the incorrect idoc header. It does however change the idoc segment data, just not the header. Is there maybe some other place I have to set the Idoc header data?
Thanx,
Jan

Hi Jan,
From help.sap:
Apply Control Record Values from Payload
If you set the indicator, the conversion of communication parties to the IDoc partner is only possible for systems that are not logical systems.
If you do not set the indicator, all combinations of communication parties and services are handled as services without party.
If the IDoc XML structure contains a control record during outbound processing on the Integration Server, it is rejected and created again by the IDoc adapter. If you want to include additional values in the control record, set the indicator and provide an appropriate mapping for the values. See also: Fields of the IDoc Control Record
http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/content.htm
Carlos

Cannot update delivery attributes: the following field(s) are not updatable

Hi. I create in EBS simple Order
Now , my goal is to create a delivery , pick , change shipping quantity and ship confirm. Here is my code
DECLARE
p_sales_order NUMBER := 10014445;
p_line_number NUMBER := 1.1;
p_org_id NUMBER := 308;
l_shipped_quantity NUMBER := 5;
p_api_version_number NUMBER := 1.0;
init_msg_list VARCHAR2(200);
l_commit VARCHAR2(30);
x_msg_details VARCHAR2(3000);
x_msg_summary VARCHAR2(3000);
x_return_status VARCHAR2(3);
x_msg_count NUMBER;
x_msg_data VARCHAR2(3000);
p_validation_level NUMBER;
v_errbuf VARCHAR2(2000);
v_retcode VARCHAR2(20);
v_released_status wsh_delivery_details.released_status%TYPE;
v_inv_interfaced_flag wsh_delivery_details.inv_interfaced_flag%TYPE;
v_oe_interfaced_flag wsh_delivery_details.oe_interfaced_flag%TYPE;
v_source_code wsh_delivery_details.source_code%TYPE;
v_pending_interface_flag wsh_trip_stops.pending_interface_flag%TYPE;
l_changed_attributes wsh_delivery_details_pub.changedattributetabtype;
l_source_code VARCHAR2(30) := 'OE';
-- Parameters for WSH_DELIVERIES_PUB
p_delivery_name VARCHAR2(30);
p_action_code VARCHAR2(15);
p_asg_trip_id NUMBER;
p_asg_trip_name VARCHAR2(30);
p_asg_pickup_stop_id NUMBER;
p_asg_pickup_loc_id NUMBER;
p_asg_pickup_loc_code VARCHAR2(30);
p_asg_pickup_arr_date DATE;
p_asg_pickup_dep_date DATE;
p_asg_dropoff_stop_id NUMBER;
p_asg_dropoff_loc_id NUMBER;
p_asg_dropoff_loc_code VARCHAR2(30);
p_asg_dropoff_arr_date DATE;
p_asg_dropoff_dep_date DATE;
p_sc_action_flag VARCHAR2(10);
p_sc_intransit_flag VARCHAR2(10);
p_sc_close_trip_flag VARCHAR2(10);
p_sc_create_bol_flag VARCHAR2(10);
p_sc_stage_del_flag VARCHAR2(10);
p_sc_trip_ship_method VARCHAR2(30);
p_sc_actual_dep_date VARCHAR2(30);
p_sc_report_set_id NUMBER;
p_sc_report_set_name VARCHAR2(60);
p_sc_defer_interface_flag VARCHAR2(60);
p_sc_send_945_flag VARCHAR2(60);
p_sc_rule_id NUMBER;
p_sc_rule_name VARCHAR2(60);
p_wv_override_flag VARCHAR2(10);
p_asg_pickup_stop_seq NUMBER;
p_asg_dropoff_stop_seq NUMBER;
x_trip_id VARCHAR2(30);
x_trip_name VARCHAR2(30);
fail_api EXCEPTION;
x_debug_file VARCHAR2(100);
l_ship_method_code VARCHAR2(100);
l_user_id NUMBER;
l_resp_id NUMBER;
l_appl_id NUMBER;
CURSOR c_ord_details IS
SELECT DISTINCT det.source_header_number sales_order,
det.org_id,
det.source_line_number,
det.source_header_id,
det.source_line_id,
det.source_header_type_name,
det.inventory_item_id,
det.requested_quantity,
det.delivery_detail_id,
(SELECT concatenated_segments
FROM mtl_system_items_kfv
WHERE inventory_item_id = det.inventory_item_id
AND organization_id = det.organization_id) ordered_item,
det.organization_id,
det.src_requested_quantity,
det.shipped_quantity,
del.delivery_id,
del.status_code delivery_status_code,
det.released_status pick_release_status,
det.oe_interfaced_flag,
det.inv_interfaced_flag
FROM wsh_delivery_details det,
wsh_delivery_assignments asn,
wsh_new_deliveries del
WHERE 1 = 1
AND det.delivery_detail_id = asn.delivery_detail_id
AND asn.delivery_id = del.delivery_id(+)
AND det.source_header_number = 1199656
AND det.source_line_number = '1.1'
AND det.org_id = 10102
AND shipped_quantity IS NULL
AND NVL(del.status_code, 'OP') <> 'CL'
and det.delivery_detail_id =21439836
/* AND det.released_status = 'Y'*/;
BEGIN
-- Initializing the Applications
SELECT user_id INTO l_user_id FROM fnd_user WHERE user_name = 'MSHAPIRA';
SELECT responsibility_id, application_id
INTO l_resp_id, l_appl_id
FROM fnd_responsibility_vl
WHERE responsibility_name = 'OM Super User - UDS UK';
fnd_global.apps_initialize(l_user_id, l_resp_id, l_appl_id);
FOR i IN c_ord_details LOOP
DBMS_OUTPUT.put_line('Initializing the Application for Shipping Transactions');
-- Mandatory initialization for R12
mo_global.set_policy_context('S', i.org_id);
mo_global.init;
-- Ship Confirming
p_delivery_name := TO_CHAR(i.delivery_id);
DBMS_OUTPUT.put_line('Before Shipping, Calling WSH_DELIVERY_DETAILS_PUB API to Update Shipping Attributes');
DBMS_OUTPUT.put_line('=============================================');
l_changed_attributes(1).delivery_detail_id := i.delivery_detail_id;
l_changed_attributes(1).shipped_quantity := 5;
wsh_delivery_details_pub.update_shipping_attributes(p_api_version_number => 1.0,
p_init_msg_list => init_msg_list,
p_commit => l_commit,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data,
p_changed_attributes => l_changed_attributes,
p_source_code => l_source_code);
IF (x_return_status <> wsh_util_core.g_ret_sts_success) THEN
RAISE fail_api;
DBMS_OUTPUT.put_line('Failed to Update the Shipping Attributes');
ELSE
DBMS_OUTPUT.put_line('Successfully Updated the Shipping Attributes');
END IF;
BEGIN
SELECT shipping_method_code
INTO l_ship_method_code
FROM oe_order_headers_all
WHERE order_number = i.sales_order
AND org_id = i.org_id;
EXCEPTION
WHEN OTHERS THEN
l_ship_method_code := NULL;
END;
p_action_code := 'CONFIRM'; -- The action code for ship confirm
p_sc_action_flag := 'S'; -- Ship entered quantity.
p_sc_intransit_flag := 'Y';
--In transit flag is set to 'Y' closes the pickup stop and sets the delivery in transit.
p_sc_close_trip_flag := 'Y'; -- Close the trip after ship confirm
p_sc_trip_ship_method := l_ship_method_code; -- The ship method code
p_sc_defer_interface_flag := 'Y';
p_sc_stage_del_flag := 'Y';
p_sc_create_bol_flag := 'N';
p_wv_override_flag := 'N';
-- API Call for Ship Confirmation
DBMS_OUTPUT.put_line('Calling WSH_DELIVERIES_PUB to Perform Ship Confirmation');
DBMS_OUTPUT.put_line('=============================================');
wsh_deliveries_pub.delivery_action(p_api_version_number => 1.0,
p_init_msg_list => init_msg_list,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data,
p_action_code => p_action_code,
p_delivery_id => i.delivery_id,
p_delivery_name => p_delivery_name,
p_asg_trip_id => p_asg_trip_id,
p_asg_trip_name => p_asg_trip_name,
p_asg_pickup_stop_id => p_asg_pickup_stop_id,
p_asg_pickup_loc_id => p_asg_pickup_loc_id,
p_asg_pickup_stop_seq => p_asg_pickup_stop_seq,
p_asg_pickup_loc_code => p_asg_pickup_loc_code,
p_asg_pickup_arr_date => p_asg_pickup_arr_date,
p_asg_pickup_dep_date => p_asg_pickup_dep_date,
p_asg_dropoff_stop_id => p_asg_dropoff_stop_id,
p_asg_dropoff_loc_id => p_asg_dropoff_loc_id,
p_asg_dropoff_stop_seq => p_asg_dropoff_stop_seq,
p_asg_dropoff_loc_code => p_asg_dropoff_loc_code,
p_asg_dropoff_arr_date => p_asg_dropoff_arr_date,
p_asg_dropoff_dep_date => p_asg_dropoff_dep_date,
p_sc_action_flag => p_sc_action_flag,
p_sc_intransit_flag => p_sc_intransit_flag,
p_sc_close_trip_flag => p_sc_close_trip_flag,
p_sc_create_bol_flag => p_sc_create_bol_flag,
p_sc_stage_del_flag => p_sc_stage_del_flag,
p_sc_trip_ship_method => p_sc_trip_ship_method,
p_sc_actual_dep_date => p_sc_actual_dep_date,
p_sc_report_set_id => p_sc_report_set_id,
p_sc_report_set_name => p_sc_report_set_name,
p_sc_defer_interface_flag => p_sc_defer_interface_flag,
p_sc_send_945_flag => p_sc_send_945_flag,
p_sc_rule_id => p_sc_rule_id,
p_sc_rule_name => p_sc_rule_name,
p_wv_override_flag => p_wv_override_flag,
x_trip_id => x_trip_id,
x_trip_name => x_trip_name);
IF (x_return_status <> wsh_util_core.g_ret_sts_success) THEN
DBMS_OUTPUT.put_line('Ship confirm has not been Completed For SO => ');
ROLLBACK;
RAISE fail_api;
ELSE
DBMS_OUTPUT.put_line('Ship confirm Successfully Completed For SO => ');
COMMIT;
DBMS_OUTPUT.put_line('Checking the Delivery Status after delivery action API Call');
DBMS_OUTPUT.put_line('==========================================');
SELECT wdd.source_code,
wdd.released_status,
wdd.inv_interfaced_flag,
wdd.oe_interfaced_flag,
wts.pending_interface_flag
INTO v_source_code,
v_released_status,
v_inv_interfaced_flag,
v_oe_interfaced_flag,
v_pending_interface_flag
FROM wsh_trips wtr,
wsh_trip_stops wts,
wsh_delivery_legs wlg,
wsh_new_deliveries wnd,
wsh_delivery_assignments wda,
wsh_delivery_details wdd
WHERE wtr.trip_id = wts.trip_id
AND wts.stop_id = wlg.pick_up_stop_id
AND wts.pending_interface_flag = 'Y'
AND wdd.inv_interfaced_flag <> 'Y'
AND wlg.delivery_id = wnd.delivery_id
AND wnd.delivery_id = wda.delivery_id
AND wda.delivery_detail_id = wdd.delivery_detail_id
AND wnd.delivery_id = p_delivery_name
AND wdd.source_line_id = i.source_line_id;
IF (v_source_code = 'OE' AND v_released_status = 'C' AND
v_inv_interfaced_flag <> 'Y' AND v_oe_interfaced_flag <> 'Y' AND
v_pending_interface_flag = 'Y') THEN
DBMS_OUTPUT.put_line('The Delivery has been Shipped & the Next Step is - Run Interface');
DBMS_OUTPUT.put_line('===========================================');
-- API Call for Submitting Interface Trip Stop
wsh_ship_confirm_actions.interface_all_wrp(errbuf => v_errbuf,
retcode => v_retcode,
p_mode => 'ALL',
p_stop_id => NULL,
p_delivery_id => p_delivery_name,
p_log_level => 0,
p_batch_id => NULL,
p_trip_type => NULL,
p_organization_id => i.organization_id,
p_num_requests => 1,
p_stops_per_batch => 1);
ELSE
DBMS_OUTPUT.put_line('The Delivery has not Shipped Properly');
END IF;
END IF;
END LOOP;
EXCEPTION
WHEN fail_api THEN
DBMS_OUTPUT.put_line('==============');
DBMS_OUTPUT.put_line('Error Details If Any');
DBMS_OUTPUT.put_line('==============');
wsh_util_core.get_messages(p_init_msg_list => 'Y',
x_summary => x_msg_summary,
x_details => x_msg_details,
x_count => x_msg_count);
IF x_msg_count > 1 THEN
x_msg_data := x_msg_summary ||' '||x_msg_details;
DBMS_OUTPUT.put_line(x_msg_data);
ELSE
x_msg_data := x_msg_summary||' '|| x_msg_details;
DBMS_OUTPUT.put_line(x_msg_data);
END IF;
END;
But at the stage of updating delivery attributes I get the following error message
Warning: For Delivery Detail 21439836, the following field(s) are not updatable: SHIPPED_QUANTITY.
Why?

Hi Paul
Looks like the authorisation is failing due to a bad registration for some reason.
Would you be kind enough to clear out the registration to ensure we are dealing with a fresh start and no information is being used which may have become corrupt. You may do this by following this procedure;
Remove existing reg details
# usr/lib/cc-ccr/bin/eraseCCRRepository
List /tmp/RegistrationProfile.properties file
# cat /tmp/RegistrationProfile.properties
Attempt re-registration
# sconadm register -a -r /tmp/RegistrationProfile.properties
Send us the full output of the commands above if you would please.

Field BKPF-STBLG not updated

While canceling the commercial as well as excise invoice the field BKPF-STBLG not updated.

Hi,
Thanks for your reply.
I did the changes to the standard sort key 018-Asset Number as per your advise and didnt get the desired outcome.
Our asset code length is 7 and sub asset length is 1
So i went to OB16 and added STBLG to the sort key 018, then system says that you can maintain only upto 18 characters.
So i have made asset number to length to 7 and sub number lengtth to 1 and STBLG length to 10.
After saving the sort key, i have assigned the same sort key to the all of my asset related GL accounts in company code data under control data tab.
Now i reversed one asset transfer transaction and checked the BKPF entry. It didnt updated either in sending company code document nor receiving company code's document.
Please advise me, if i am missing anything.
But really thankful to you for your intiation.
Thanks,
Srinu...

Data is not updating in DB Table

Hi...All
we have done the RFC-JDBC Synchronous scenario, we are getting the success messages into SXMB_MONI ,in the CCM also it was showing success. but data is not updating in to the Database Table. client want to see the response data in the Database Table only.
pls help me this is very urgent.
Regards,
Pasi.

Hi,
If everything is working fine in XI there is some problem in database end only while query gets executed. Try debuging the sql query which you have by giving log statement and see what the query generated is.
Got to your receiver jdbc communication chalnnel , Advance mode > Additional parameters,
Enter logSQLStatement in the name column and true in the value column
To view the SQL log Click on the message ID of the communication channel monitoring.
or, alternatively, in Runtime workbench, click your message> details> audit log tab.
Run the interface once more. Check the communication channel now. It will show the actual insert statement which is trying to insert into the DB and then you can figure out what is the query being fired to database and see if it is fine.
Copy the same query and run in databse. you will be able to find the exact problem.
thanks
amit
reward point if answer is useful

When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.

Hi,
When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.
Active directory attribute co have value vietnam but in FIM Portal country attribute have value VIET NAM
we simply mapped AD Attribite to FIM Attribute for inbound
co===>country
why this happen
Regards
Anil Kumar

Anil, please check what do you have in metaverse. It seems that you have attribute flow precedence configured in a way that doesn't export to FIM Portal.
Let's say you have flows like:
(AD MA)
Import flow: (AD) description -> (metaverse) description
(FIM MA)
Import flow (FIM) description -> (metaverse) description
Export flow (FIM) description <- (metaverse) description
And you have higher precedence from FIM. Then, you would never have FIM value updated - even if value in AD changes. It would be exported to FIM only when you don't have this attribute filled in FIM.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again.

Re: Changes to screen field date was not updated

Similar Messages

Maybe you are looking for