RE: PO Workflow for Contract(me32k)

Hi friends,
I created a custom workflow for contract wherein I gave a condition check before the mail goes to the initiator that after all the approvers approve then only send the email.
The problem here is even after assigning the linkage in swe2, the workflow is not getting triggered.
What i observe here is there is no linkage in swec. Is it something to do with.
When i check in the log, the custom workflow is not getting triggered in the first place and the standard one does.
Any help is appreciated!
Thanks

Hi,
purchasing workflow (including contracts) are usually started by an event from the release strategy, not by the change documents.
If an event is raised which starts the standard workflow this means that the event customizing is active.
check:
the event log - swel - (activation by swels) for behavior of the workflows (yours and the standard)
just to make sure, check that you marked the linkage as active in swe2
check starting conditions (if you added them)
check that the same event is used to start the workflows
check the event binding of your workflow

Similar Messages

SAP Printer change for contract ME32K-MK

Hi Guys
We need to change for printer name for Contract ME32k MK documnet type
We have changed at condition record level doctype/purch.org
When we are generation new output we are unable to get new printer.
Plase suggest
SAP MM

Hi Thanks for response
Create new output NEU manually
No repeat output
Thanks in advance
SAP MM

Workflow for Contract in Real State Flexible

Iu2019m working with Real State Flexible, specifically with the Real State Contract TCode RE80 or RECN.
My issue here is that I need to trigger a workflow event when any Notice is created in the "Term" subscreen over the Contract.
The BOR for the Contract is BUS1505
Thanks for any help

Please check with Workflow Template
WS17900006
WS 17900005
I also found you have standard event that gets triggered for your requirement. Please check in SWEL Tcode for event trigger.
Thanks
Arghadip

How to add new line item using BAPI BAPI_CONTRACT_CHANGE for contract-ME32K

HI Experts,
how to add new line item using BAPI: BAPI_CONTRACT_CHANGE for existing contract.
Requirement:
Already the contract having two line items using ME31K.
Custom program has to add new line items in existing contract.
Thanks,
Sendil

I got the solution:
We can do like this:
1. Get all details using details, BAPI_CONTRACT_GETDETAIL.
2. After getting results, append new line item. Then use your BAPI.
Check this posting program.. where this bapi is used, use the same coding technique.
IDOC_INPUT_PURCONTRACT_CHANGE

MM Workflow for Approval of Contract- Steps

Hi All,
Can you please help me with process or steps for Customizing Workflow for Contract Approval?? I need with some example.
Any links for references also will be helpful.
Thanks in Advance.

[workflow material;[http://help.sap.com/saphelp_srm50/helpdata/en/26/0f8b41ed891609e10000000a155106/content.htm]

Searching for Workflow for Purchase Order Change

Hi experts!
We are using SRM5.0 / extended classic scenario and backend R/3 4.7 Enterprise.
We should implement an approver process for the purchase order changes. Does any one of you know whether there exists a standard SAP workflow?
Many thanks for your help.
Regards,
Corinne

Hi
Please refer to the following links for detailed step-by-step details.
Workflows for Purchase Orders - n-step approval workflow ( WS14000145 )... Start WS14000075, WS14000089 or WS14000145...-step approval workflow ( WS14000145 )
http://help.sap.com/saphelp_srm50/helpdata/en/5a/c5173f5ff48443e10000000a114084/frameset.htm
Authorization - Purchase orders ( WS14000145 )
http://help.sap.com/saphelp_srm50/helpdata/en/f7/a6a3415e34b05fe10000000a1550b0/frameset.htm
Setting Up SAP Business Workflow - WS14000145 ( n-step approval )... WS14000145... WS14000145 N-step approval PO WS14000145 N-step approval of contract
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
Dynamic Modification - Purchase orders ( WS14000145 )
http://help.sap.com/saphelp_srm50/helpdata/en/84/dda441e79ead5fe10000000a1550b0/frameset.htm
Back & Forth Processing and the Retain Function - Purchase orders ( WS14000145 ) 
http://help.sap.com/saphelp_srm50/helpdata/en/6b/eca441eea7ef0be10000000a1550b0/frameset.htm
Approval Workflows for Purchase Orders and Change Versions
http://help.sap.com/saphelp_srm50/helpdata/en/ec/fe163ff8519a06e10000000a114084/frameset.htm
Workflow for Contracts - Workflow for Purchase Orders ( WS14000145 )
http://help.sap.com/saphelp_srm50/helpdata/en/26/0f8b41ed891609e10000000a155106/frameset.htm
SRM Business Workflow - One-step Approval
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/frameset.htm
WS14000089
http://help.sap.com/saphelp_srm50/helpdata/en/5a/c5173f5ff48443e10000000a114084/frameset.htm
WS14000075
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5a/af5efc85d011d2b42d006094b92d37/frameset.htm
Regards
- Atul

N level-Approval for contract workflow (WS14000148) in SRM

Hi SDN'rs
I want to activate N level-Approval for contract workflow (WS14000148) in SRM
When I am creating the contract in SRM I can see the approvers in the approval preview.
But when I release the contract and look at the approval privew there are no approvers
and the status of the contract is released.
We are on SRM Server 5.5 and SP 07.
Here what I did
1. I implemented the BADI 'BBP_WFL_APPROV_BADI' using the sample implementation and populated the approvers.
2. I activated events SAVED,CHANGEVERSIONSAVED for WS14000148 in OOCU transaction.
3. I see event linkages for WS14000148 for both events SAVED,CHANGEVERSIONSAVED in SWE2 transaction.
4. I assigned role SAP_EC_BBP_PURCHASER to for subworkflow N step for contract WS14000147.
( User who is creating contract has this role)
5. Consistency check for WS14000148 is green and WS14000147 is yellow in SWUD
6. Event simulation for BUS2000113 and events SAVED,CHANGEVERSIONSAVED shows WS14000148 successfully started.
I see dump in ST22 with errors TSV_TNEW_PAGE_ALLOC_FAILED and SYSTEM_NO_SHM_MEMORY with WF-BATCH is this any thing to do with that?
If any one know what are the steps I am missing please let me know.
Thanks
A S

Hi
Please refer to these OSS notes which might help.
Refer to following OSS Notes ->
Note 735026 - Memory problems at BBP_GETLIST_INDEX_FILL
Note 932836 - BBP_GETLIST_INDEX_FILL: Activation not possible
879528 WS14000148: Send mail to initiator incorrect
901200 WS14000148 dia wrk item despite NO_FURTHER_APPROVAL_NEEDED=X
879873 BUS2000113: The Object_ID attribute may be empty
903015 BAdI Workflows: Events and parallel steps
901068 BAdI Workflows: Enhancement of Note 896556
769458 Dynamic workflows: No adjustment after document change
972757 Occurence of the SYSTEM_NO_SHM_MEMORY runtime error
741864 FinBasis: Termination TSV_TNEW_PAGE_ALLOC_FAILED
864473 Deactivating the shared memory when searching by prefix
928642 Container factory: Shared memory dump update
Refer to these links.
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/26/0f8b41ed891609e10000000a155106/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/6b/eca441eea7ef0be10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/f7/a6a3415e34b05fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/6b/eca441eea7ef0be10000000a1550b0/frameset.htm

Also raise an OSS message with SAP as well.
Regards
- Atul

How to make the workflow available for Contract Template ? CLM

Hi expert,
It seems that no workflow can be defined in the Library Item Phase Configuration .
The customer needs the approval workflow for the contract template also ,so does anyone know how to make it
possible with configuration or Dev ?
Your help is highly appreciated !
Thanks a lot !
Regards,
Lilian

Refer :
7 Component Configuration Dependencies
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/core.902/a92171/compdep.htm#1008620
Web Cache
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/core.902/a92171/compdep.htm#1016697
3.2.2 MIDTIER OPCA Mode
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/CONFIGHTML/cgbasic.htm#1008246
- Senthil

Workflow for Work Contract Approval

Hello everybody,
I need a Workflow for 2 level of approval of work contract.
Whenever a user make a work contract it requires approval upto two level.If Authority1 approves the contract it will go for the 2nd level approval to authority 2.If Authority2 reject that then it will come back to the creater to change it or withdraw the contract.If authority2 approve that then the work contract will be finally approved and complete the workflow else it will return back again to the creater.
Can some one tell me whether any standard workflow is available in SAP for Work Contract approval? Which BOR Object will be useful If I have to made custom development?

Business Object:BUS2014
Workflow Templat:20000079
Thanks
Arghadip

Purchase Order not subject to release strategy for contract rel. strategy

Hello, I am trying to set release strategy for contracts (TCODE: ME31K). I have created characteristic, which use table CEKKO and field name BSTYP in Addnl data tab. I have checked values, and they are correct. Then I have assigned in release strategies in classification view value contract. But when I try to check release strategy in ME31K with green flag, it display error: Purchase Order not subject to release strategy. (I have tried to do the same strategy in purchase order, of course with value Purchase order, and it works nice).
So I have checked this release strategy with this codes:
CL24N ok,
CT04 ok,
CL30N ok,
CL20N ok,
Release simulation in release strategy works,
Then I found out that I should check SE38, SE37 but I do not understand how to use them (according: Purchasing Document Not Subject to Release Strategy).
Thank you for your help in advance.

I haven't said to use EKPO table in characteristics. You have to use CEKKO - BSTYP in characteristics.
I've just said the compare the value which you have given in Release strategy - Classification and EKPO table for the particular contract.
Also compare your release strategy settings with many existing documents in SCN.
Check your Classification should be like that.
You may see the error message in ME31K. Just save the contract then go to ME32K/ME33K or ME35K you can see the release strategy will effect for the contract.

Workflow for purchase requisition?

Dear all;
I would like to know if there is any standar workflow for MM that can map this requeriment: user A creates a purchase requsition, the WF sends a mail to the user B to release it, user B releases it and then the WF sends a mail to user A to let him know the event.
The WF should know how many approvals (if any) the purchase has, so it can adapt to any type of purchase
Thank you very much!

Hi f_mont.
Workflow don't need a design with a loop because it is created a new workflow to each step of aproval. Standard program will trigger other workflow to next level and will trigger terminator event to already running.
It's automatic and transparent to user and you. This follow the sequence of each aproval sequence depending of functional configuration about it.
To get it ready to start and be triggered, ask to functional fill field in SPRO, with 1 (users of viwl T16FW) or 9 (EXIT). --> SPRO --> Materials management --> Purchasing --> Purchasing req. --> Release procedure ... --> Define Release procedure for PR...Release Codes --> Field workflow = 1 or 9.
Configure the same number in rule PFAC in workflow step task to 20000027 and it will get automatic depending on configuration in 1 or 9. 1 is automatic and needs previous functional configuration and 9 needs that you encode some line codes in user exit EXIT_SAPLEBNF_005 (enhance M06E0005 in CMOD).
I need to do the same here (for PO, contract and requisition), but here will be type 9 and I need to get users by profile in user exit.
best regards.
Glauco
Edited by: Glauco Kubrusly on Jun 14, 2011 9:58 PM

BAPI Function module for transaction ME32K for change

Please let me know the name of the BAPI Function module for transaction ME32K for change the contract.

Hi Krishan,
I have checked but their is no BAPI called
BAPI_CONTRACT_CHANGE.
If I am wrong plz correct me with the procedure to view the above BAPI in SAP System.
Regards,
Nitin

Approval for Contracts

Hi all,
I created Contract for which I didn't define approver. Why, after I released it, Contract status is yet "Waiting for approval"? Maybe an contract approval workfolw was defined? If yes, how can I modify it?
Thanks, Regards,
Maria

Hi Yann,
the starting condition related to Purchase Contract- Evant SAVED is the following:
&Purchase Contract.Previous Doc. Type&                        EXTREQ     or
&Purchase Contract.Previous Doc. Type&                        BUS2121     or
&Purchase Contract.Previous Doc. Type&                        BUS2202     or
              &Purchase Contract.Previous Doc. Type&       NX                                                                                and
              &Purchase Contract.Last Changed By.Activity Group&       CE                   SAP_BBP_STAL_PURCHASE_MANAGER
IF TRUE Workflow Without Approval for Contract
Else No Action
How can I allow Contract have no approval step? Modifying this start condition?
Thanks very very much, Regards,
Maria

Lock the delete function (Trash) for contract documents

Dear Experts,
I have Query in SAP CLM :
I am in need to lock the delete function (Trash) for contract documents after they have been executed. After a user sets the contract document phase at "Executed," they should not be able to click the trash icon and delete that contract document record.
Thanks in advance.
Best Regards,
Iqbal

Hi Mudit,
we have already script for Contract Document and Post Phase Change.
I am not java expert, where to put the code for delete or inactive the trash icon in this programe, Pls Help
// Author: ABCD
// Class: Contract Document
// Context: Document Lifecycle Event
// Target: Post Phase Change
// Imports
import com.frictionless.api.doc.IapiDocumentLockManager;
import com.frictionless.api.common.types.ObjectReferenceIfc;
import com.frictionless.api.common.types.TypeFactory;
import com.frictionless.api.contracts.ContractIBeanIfc;
import com.frictionless.common.db.PersistentBo;
import com.frictionless.api.doc.collaboration.*;
import com.frictionless.api.common.log.Logger;
import java.math.BigDecimal;
import java.util.*;
import com.frictionless.api.doccommon.masterdata.*;
import com.frictionless.api.common.exception.*;
import com.frictionless.api.ibean.IBeanIfc;
import com.frictionless.api.ibean.IBeanHomeIfc;
import com.frictionless.api.contracts;
import com.frictionless.api.usermgmt.masterdata.*;
import com.frictionless.api.common.exception.*;
import com.frictionless.api.common.types.*;
import com.frictionless.api.ibean.*;
ApplicationException ae = new ApplicationException(session);
// Logger
logMsg = Logger.createLogMessage(session);
// Agreement Bean
agreeBean = doc.getParentIBean();
if (hasValue(current_phase))
// Lock the legal approval and workflow fields after draft phase
if (current_phase.equals("Draft"))
IapiDocumentLockManager.unlockField(session, doc, "CLAUSE_CHANGE");
IapiDocumentLockManager.unlockField(session, doc, "LEGAL_APPROVER");
if (!(current_phase.equals("Draft")))
IapiDocumentLockManager.lockField(session, doc, "CLAUSE_CHANGE");
IapiDocumentLockManager.lockField(session, doc, "LEGAL_APPROVER");
// If contract document phase is not Internal Approval
if ((current_phase.equals("Executed")))
agreeBean.getIBeanHomeIfc().upgradeToEdit(agreeBean);
collaboratorList = agreeBean.getCollaborators();
for (collabIter = collaboratorList.size(); collabIter > 0; collabIter--)
// Get the collaborator
collab = collaboratorList.get(collabIter-1);
name = collab.getDisplayName();
if (!collab.getCollaboratorRole().getDisplayName().equals("Owner") @and !collab.getRepresenting().getDisplayName().equals("Legal"))
collaboratorList.delete(collab);
agreeBean.getIBeanHomeIfc().save(agreeBean);
if ((current_phase.equals("Internal Approval")) @or current_phase.equals("Legal Approval"))
agreeBean.getIBeanHomeIfc().save(agreeBean);
agreeBean.getIBeanHomeIfc().downgradeToView(agreeBean);

Workflow for P.O release to send sap internal mail

Hi
I am trying to configure Workflow for the following scenario of release. Please guide me how to configure the same in sequence with t-code.
We have two level of release procedure for P.O depending upon P.O value.
When P.O created the first approver should to get SAP internal e-mail.
Once 1st release done then 2nd approvar should get the SAP internal e-mail.
When final release is done then Creater of the P.O should get the intimation about the final release in his mail box.
Please guide with Workflow ID's and task and where to assign agent etc.
Thanks,
Dhananjay

Hi
I tried to do the setting as instructed in many threads. Result is as follows.
When I create a contract 1st approver receing the mail, but after releasing workflow status is still inprocess and the 2nd approver is not getting any mail.
As I did work arroung job I am not able to understad the exact process(Sequnce of setting) to be done.
That is why I posted in thread.
Please guide the flow of setting.
Thanks,
Dhananjay

RE: PO Workflow for Contract(me32k)

Similar Messages

Maybe you are looking for