Re-routing options on E90 and RTTI
I have a problem considering rerouting of a route. When I type where I want to go, it gives me the route and is ready to navigate to the spot, but should I choose a different route, the navigator does not let choose a different route. Only options I can choose are: Avoid highways, avoid roads that have a charge and set a road block. I remember that in maps 1.1 I could choose another route and it worked like a toilet in a train. I have updated the fw of the phone, formated the memorycard and installed maps million times again and again and again. Does anyone have a solution, as I am running out of wisdom.
Also I wish to critisize the RTTI-function. In Finland the midnight summer festival time makes the roads heavily congested. The RTTI should report traffic jams and reroute the route to somewhere else. I updated the RTTI-info several times during the journey and I have double checked that the options are set accordingly so that it should work. But there I was on road number 5 and RTTI showed that everything should be smooth as baby skin. BS!
1. How much total RAM can you install on this? I know the standard 4 and 8 gig options can be bought, but how whats the max configurable that will work?
16GB max in a current macbook pro.
2. I'm debating installing either an SSD or larger drive on this. I'd like to be able to run a few windows VM's on the box, possibly 2 Server VM's (2K8R2) and a windows 7 VM. Is this realistic?
SSD's still don't have the same max capacities as HDD's and of course are way more expensive. For what you are suggesting you want to stuff on to the disk I think you would be better off with a larger capacity HDD.
3. How difficult is it to add the SSD (or any other drive) and re-install the Mac OS on it? I'm fairly good with windows and all..but relatively new to Macs.
See OWC's instructional video on replacing a drive in the 15" macbook pro.
Similar Messages
-
I am having trouble mirroring my ipad with my new apple tv. I don't see any options for airplay. Any suggestions would be greatly appreciated. Thanks!
Is your apple tv also up to date?
Are they both on the wireless network, or is the apple tv using an ethernet cable?
Reboot your wireless router, your apple tv, and your ipad, in that order. -
Order Fulfillment of LSP Service - multiple routing options - PR generation
Hi,
We are a logistics company and in the process of implementing SAP in our organsiation. We are referring to SAP Best Practices for LSP which suggest that we create a service type material master record called 'LSP Service' with variant enabled for capturing characteristics at the time of customer sales order.
Suppose I get a customer sales order for 'LSP Service' with variant info trucktype=6wheeler and consignor party - xyz, Mumbai and consignee party - pqr, guwahati.
Now, The Transport planning officer has to explore various route options for transporting goods from Mumbai to Guwahati which are
1. Mumbai to Guwahati direct
2. Mumbai to Delhi , Delhi to Guwahati
3. Mumbai to KAnpur, Kanpur to Guwahati
4. Mumbai to Indore, Indore to Guwahati
5. Mumbai to Nagpur , Nagpur to Guwahati
6, Mumbai to Nagpur, Nagpur to Kolkata, Kolkata to Guwahait
We execute the customers orders by hiring the vehicles from various vendors and our prices with the vendors are not fixed and decided on a day to day basis.
Based upon historical data, the system should propose the indicative costing for a given order for all the possible routes and transport planning officer should select the best option mostly on the basis of least cost. Now based upon the selected route, system should generate purchase requisitions.
For example, if Mumbai/Delhi/Guwahati route is selected, we would need to hire one vehicle from a vendor for Mumbai to Delhi, and another vehicle from another vendor for Delhi to Guwahati. There would be 2 purchase orders for hiring of vehicles required and for these 2 POs I'd want that 2 PRs should be generated one for mumbai to delhi, and another for delhi to guwahati.
Hope I've clarified my requirement. Shall appreciate your suggestions on best way to handle the scenario.Hi,
06 076 is only for applicable only in case of material.
For Service and material both, use 06 400 as error "Materials/services for requisition & & already ordered with & &"
NOtes 786736
This may help u !
Regards,
Pardeep malik -
I have a wireless router for my house, and my I-phone can find the network and sign in but it won't show up in airport for my i -mac even when right beside the router. What can I do?
Do you have any videos/movies in the video app?
In iTunes if you right click on the video and select Get Info and go to the Option tap what Media Type is shown? -
Im trying to get my wii online, so i wanted to access the wireless router options, where u up the IP in the address bar, signed in, i only can acess the setup, wireless, and security tabs anything else i click on gives me a "internet explorere cannot display the webpage, i tryed turinning off the wirewall very breifly to see if it would let me accesses it didn't. please help! o and its a wrt54g v8
Message Edited by XpErTags on 03-19-2008 12:38 PMwhen you tried to access the set up page did it ask you for the network key? if not could you check the ip address on your computer?
-
OSB Routing Options for JMS Proxy
Hello!
My config:
WS Proxy Service -> <jms queue> ->Proxy Service -> WS Service
jms queue used for guaranteed delivery of msg. I wanna dynamically change retry interval and retry count.
Does Configuration Routing Options in Proxy Service (Retry Interval and Retry Count) override default settings of queue?
I tried to change JMS headers (JMS_BEA_DeliveryTime, JMS_BEA_RedeliveryLimit) via snippet Transport Headers, but all of these headers are not delivered.
Any ideas?
Thanks,
lam
Edited by: laaam on 17.05.2012 12:50laaam wrote:
but all of these headers are not delivered.
Edited by: laaam on 17.05.2012 12:50They should be delivered, I have a proxy that send JMS header using an insert operation of my expression "as first child of" */ctx:transport/ctx:request/tp:headers* "in variable" outbound.
Cheers,
Vlad -
Printing from E90 and 9300i via wifi
Dear all, I have nokia e90 and nokia 9300i. Is it possible to print the document such as email from phones directly to my wireless printer (HP C4780)? Thank you
Yes,
As long as the computer and the printer both connected to the same network you may install it on any computer, even a wirelessly connected one..
By following the installation select a network Ethernet connection (as referred to teh printer connection itself) and the installation should locate the printer.
If the printer cannot be located for any reason, ensure your wireless network is the same and there is no feature as guest network configured for your router (e.g. setting a different wireless network for guests usage) and both the subnet and the gateway of your pritner and computer are identical.
Please let me know of any issues,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
IPhone 4 (maps) can you stop toll rout options
iPhone 4 (Maps) I live close to M6 Toll. all route options given involve Toll use, is there any way I can block all Toll options?
As far as I know, you can only select the phone number of the device you're using.
Meaning, Me and Bob can't both receive iMessages to 555-555-1234 unless we have the Apple ID enabled on both phones.
You might be seeing that option because you have Apple ID enabled on both devices so it's allowing you to see iMessages sent to both numbers, but I can't confirm because I don't have two phones
But it seems to be the case this is what Apple says:
"When you sign in to your Apple ID with iMessage using an iPhone with iOS 6, your Apple ID is linked to your phone number. This allows you to receive iMessages sent to your phone number on other iOS 6 devices signed in to the same Apple ID."
http://support.apple.com/kb/HT3529 -
How do I get more than one signature option in Fill and sign?
How do I get more than one signature option in Fill and sign?
Hi,
Are you trying to place more than one signature on a PDF document?
Please explain the workflow.
Regards,
Anand -
I no longer have the option to share and print in Numbers. It used to be there as I have printed from it in the past but it has disappeared! I also use Pages and the option is still there with that app. Does anyone have solution to this?
I really don't understand.
The menu item is available :
Maybe, you didn't activate the tool :
Yvan KOENIG (VALLAURIS, France) mardi 2 août 2011 23:10:17
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
i am currently running a trial version of indesign. i am trying to make a cd booklet. when i open a new document and try to find 'compact disc' in the document presets, it isn't there. all i have for options are 'default and custom'. is it possible to open the 'compact disc' preset from a trial version?
Are you sure, Eugene? I have this option:
-
I cannot find my iPhoto upgrader in Finder...I was told to go to the Go menu and click on Utilities...this is not an offered option...and nothing comes up in the search box...I have upgraded to OS X Yosemite, downloaded the iPhoto app to go with it, and the iPhoto upgrader...just can't find the upgrader...
In the finder applications folder ==> Utilities -- double click the iphoto library upgrader and then launch iphoto 9.6.1
iPhoto '11 or later: About the Library Upgrader - Apple Support -
When I open iTunes, it will not allow me to preview or download TV shows. The preview and download options are gray and will not let me view them. I have tried installing the latest Quicktime but it tells me that I have to do software update and when I do, Quicktime does not appear to need an update. I have no idea what to do
Click on your preference and check the Parental tab for possible restrictions. Open iTunes, then click the iTunes menu, select preferences after the window opens click on the Parental icon, take a look at the content restrictions section.
-
i formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options, 1- erase and sync, 2- transfer purchases. what to do?
Follow these instructions:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Maybe you are looking for
-
Create and publish your own book using the Book module in Lightroom. Discover how to quickly add text and images, change layouts and customize templates. http://adobe.ly/12t1S9f
-
PCA: Transfer Payables/Receivables
Hi, I would like to know, if it is possible to exclude accounts payables / receivables from the transfer to PCA(Transaction 1KEK)? What settings in the customizing have to be changed for individual accounts?
-
Hi I have a query for WS-RM in OSB. My client (another team) will call my Proxy . The proxy is a wsdl based proxy. The input is an xml message and the output is an xml message. My proxy work flow is 1. Read Input Body and assign to a variable. 2. Ser
-
Doubts over the tablet battery.(thinkpad 8)
I am Brazilian, and I have a question about the battery. Sorry my bad English, as in Brazil is hard to find information about this device. I see in the lenovo site that the battery lasts between 7 or 8 hours. My tablet is the lenovo thinkpad 8, 64 gb
-
Unable to choose foreign key when creating reference partition
Hello I have 2 foreign keys on a table. I am trying to choose the 2nd foreign key when creating a reference partition. I am unable to select the required foreign key. The model has Table A -> Table B -> Table C. Table A has a list partition. Table B