Re: searching database from a textfield entry

Hi, i am trying to search mySql database from the input of a jtextfield. Please can some add me to there msn and help me its really really important and urgent. my msn is [email protected]
Your soonest responce would be greatly appreciated as would your help.
regards
Pelvinder Bhamra.

There are many good examples of this in the tutorials. You might even find a solution just by searching some of the forums. Basically you need to;
Load a jdbc driver for your database.
Get a connection to database.
Construct a SQL statement e.g. select * from <table> where <column name> = < value from textfield>
process the ResultSet you get back.
Look at this link http://java.sun.com/developer/onlineTraining/Database/JDBCShortCourse/jdbc/exercises/index.html

Similar Messages

T/X model SORTing Find/Search results from Most Current Entry

Have the Palm T/X model, and use the FIND/search function constantly.
The results always come up from the earliest (oldest) entry to the most current.
This is a major league pain-in-the-butt especially when there are tons of entries to go thru to get to the most current date.
Is there any way to sort the FIND results so that they show from most Recent entry to the oldest.
This would be a HUGE Help.
Thx!
Post relates to: Palm TX

There is a pulsing, reddish dot in the middle of the
blue light but on the hard drive itself, I don't see
any "lights" in any "menu bar".
It's at blue circle with a white Q-shaped symbol at the right end of your menu bar.
If you dare to use the terminal application (can be found in the utilities folder) you can use the following command to re-index that drive. Start Terminal and type (or paste) the following line and hit enter:
sudo mdutil -E "/Volumes/xxx/"
Replace "xxx" with the name of Your drive! If there is a space in that name type it like "/Volumes/My\ Drive/"! You will be prompted for Your admin password to proceed.

Solution database: Unable to search solution from solution database

Hello,
I am able to update solutions in solution databse but when i checked from IS01 , i am not able to search the solutions from the solution database.
I have installed the TREx and every seeting is perfact.
can any body tell me what could be the problem.
Regards,
Bhavesh

hi,
I have configured the search ingine also ,
when i am check in the SPRO 8 soft ware agent framework ) all the entries ( check) are in the green status, so the engne atatus is fine .
and Trex is also working fine .
when i update the database from crmd_order, i able to see the update in the solution database but when i search in the solution database it is giving me no result.
whats else i need to chekc
Thanks ,
Bhavesh

Search content from seperate Content Database using Scope

Hi there,
I am asked to move all non-active old sites to a seperate Archive Content Database (ACDB). Management don't want to see any content from ACDB. If required to search content from ACDB, scope should be used anywhere in the webapplication to search only from
ACDB.
I am thinking to create a Archive Content DB and move all non-active site collection to it. Create a scope and make it available to all site collections.
Is it so simple of I am missing some more steps.
Please advise.
Thanks
Mickey

Hi Mickey,
Your direction is right.
One point that you need to note is that you need to create the scope in SharePoint Central Administration, then configure the scope displaying in site collections.
More information about how to configure scopes in SharePoint 2010, you can refer to:
http://www.surfray.com/blog/2013/06/17/how-to-configure-scopes-in-sharepoint-2010/
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Fetch Table name and field name from a given entry

Hi ,
i know the entry which is present in the database .But i don't know the table name and field name which has that entry .
i have to fetch the table name and field name from a given entry .
Can anyone suggest me how will i fetch the table name and field name for a given entry .
thanks in advance.

Hi ,
i know the entry which is present in the database .But i don't know the table name and field name which has that entry .
i have to fetch the table name and field name from a given entry .
Can anyone suggest me how will i fetch the table name and field name for a given entry .
thanks in advance.
Few more options to scan specific text in entire DB:
http://www.mssqltips.com/sqlservertip/1525/scan-a-sql-server-database-for-objects-and-columns-containing-a-given-text-value/
http://solutioncenter.apexsql.com/quickly-search-for-sql-database-data-and-objects/
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

Issue in configuring Standby Database from Active database in 11g by RMAN

POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.
Edited by: 895188 on Dec 21, 2012 5:50 PM
Edited by: 895188 on Dec 21, 2012 6:09 PM
Edited by: 895188 on Dec 21, 2012 6:22 PM

Hello;
Script has to be run from auxiliary.
Great details, but what I don't see is how you connect in RMAN.
Example
Start RMAN
$ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RECOVER2 (DBID=3806912436)
connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
Generally for active duplication I start the future standby on a pfile NOMOUNT.
Auxiliary Instance Initialization Parameters Needed :
DB_NAME
CONTROL_FILES
DB_BLOCK_SIZE
( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
Then start RMAN and finally run a single line duplication command.
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
mseberg

Issue in creating the standby database from Active database using RMAN

Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.

Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN

ORA-03113: Error while upgrading the Database from 11.1.0.6 to 11.1.0.7

Hi,
I am trying to upgrade the database from 11.1.0.6 to 11.1.0.7 on OEL operating system.
After applying the patch "6890831" when trying to start the database using "Startup Upgrade" command I am getting the below error.
ORA-03113: end-of-file on communication channel
Process ID: 20826
Session ID: 170 Serial number: 3
I am getting the same error when trying to create the new database using "DBCA".
Please provide me the probable outcomes.
Thanks
Amith

Below entries found in alert_orcl.log file
MMNL started with pid=15, OS id=20571
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Thu Dec 03 20:11:11 2009
ALTER DATABASE MOUNT
Errors in file /u01/app/oracle/diag/rdbms/orcl/orcl/trace/orcl_mman_20557.trc:
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
MMAN (ospid: 20557): terminating the instance due to error 27103
Instance terminated by MMAN, pid = 20557
Below entries found in the Trace file generated
error 27103 detected in background process
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
*** 2009-12-03 20:11:14.727
MMAN (ospid: 20557): terminating the instance due to error 27103

Creating physical standby database from another physical standby database

hi,
We have one production database and one physical standby of the production. Now we have situation where we need to create one database from either production or from standby. As production is loaded we can not do it using active database option. Now we have the only option to copy the database from standby.
As of now we open the standby and copy it using rman duplicate database and again we put it back to standby mode.
Is it possible to create standby database from standby database only?
Oracle version : 11.1.0.7.0
I have seen procedure allowing to do the same in version 11.2.0.3. I have tried searching for the difference but didn't find when this feature was introduced.
Thanks,
Ketul Patel

Hello;
Active duplicate should work when connected to Standby as source Database. However there's a bug 11715084 which is not fixed until version 11.2.0.4.
If patch 11715084 is available for your version it may work, but all the 11.1.0 are gone so I have no way to test.
RMAN ACTIVE DUPLICATE WHEN CONNECTED TO STANDBY AS TARGET [ID 1343515.1]
Understanding ORA-01671 error during controlfile creation / backup [ID 461121.1]
Best Regards
mseberg
Edited by: mseberg on Feb 13, 2013 8:59 AM

Problem with duplicate target database from active database

Hi all,
i try duplicate database from active database
- I have von target and auxiliary the same SYS Password
- tnsping wogks in both directions fine
- sqlplus to target and auxilairy works from both server
- Metalink Solution 1056174.1 not help
but in the Rman log become this error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on a1 channel at
ORA-17629: Cannot connect to the remote database server
ORA-17629: Cannot connect to the remote database server
i do do :
rman target sys/PASSWD@TARGET auxiliary sys/PASSWD
run
ALLOCATE CHANNEL a1 DEVICE TYPE DISK;
ALLOCATE AUXILIARY CHANNEL d1 DEVICE TYPE DISK;
duplicate target database to XXXXX
from active database
DB_FILE_NAME_CONVERT ('/XXXX/XXXX/XXXXXX','/XXXXX/XXXXXX/XXXXX/')
spfile
parameter_value_convert '/XXXX/','/XXXXX/'
set log_file_name_convert '/XXXXX/','/XXXXX/'
any Idea ?
Best Regards

Don't know if this will help, but I use the connect string below to connect, then run the command below. This is, of course, after the rman backup from the prod system has been copied to the flash_recovery_area of the aux database. All file paths are the same between the two systems. Works like a charm most nights. The local tnsnames file on the rman catalog server has working entries for @SDPROD, @rman and @SDSTB.
[Connect String]
rman TARGET SYS/xxxxx@SDPROD CATALOG rman/xxxxx@rman AUXILIARY SYS/xxxxx@SDSTB cmdfile D:\cladmin\Scripts\DuplicateSD.rcv LOG=D:\cladmin\Logs\DuplicateSD.f
[Command file block]
RUN{
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
DUPLICATE TARGET DATABASE TO DATABASENAME
NOFILENAMECHECK;
Edited by: user522620 on Jun 27, 2011 6:36 PM

Cannot Convert standby database from snapshot to physical

Hello all,
I am using Oracle Entreprise version 11gR1 and had made the followings configuration:
- ANAISMD2 : primary database+_+
- ANAISMD3 : physical standby datbase. Created via RMAN
Both are located on the same host running a RH 4.
ANAISMD3 is maintained successfully with the primary.
I can make a fail-over between the both: it works fine.
I can convert ANAISMD3 from physical to snapshot via DGMGRL: it works fine
But I cannot convert back ANAISMD3 to physical, got an error ORA-12514
I had checked also the listener service for both ANAISMD2/ANAISMD3 before launching the conversion:
- the services shown on ANAISMD3 seems correct e.g. ANAISMD2 is seen as a remote server.
- but on ANAISMD2, ANAISMD3 seems incorrect e.g. ANAISMD3 is seen as a local server.
I had attached some screen shots of dg/lsnrctl results;
What are the mistakes
Thank in advance for support
==> Before I made the conversion , DGMGRL shows correct primary/standby status:
DGMGRL for Linux: Version 11.1.0.6.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys/oracle@ANAISMD2
Connected.
DGMGRL> show configuration
Configuration
Name: ANAIS
Enabled: YES
Protection Mode: MaxPerformance
Databases:
ANAISMD2 - Primary database
ANAISMD3 - Snapshot standby database
Fast-Start Failover: DISABLED
Current status for "ANAIS":
SUCCESS
==> When I want to convert back ANAISMD3 to physical, I got the following errors from the listener:_
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys/oracle@ANAISMD2
Connected.
DGMGRL> convert database 'ANAISMD3' to physical standby;
Converting database "ANAISMD3" to a Physical Standby database, please wait...
Operation requires shutdown of instance "ANAISMD3" on database "ANAISMD3"
Shutting down instance "ANAISMD3"...
Database closed.
Database dismounted.
ORACLE instance shut down.
Operation requires startup of instance "ANAISMD3" on database "ANAISMD3"
Starting instance "ANAISMD3"...
Unable to connect to database
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Failed.
You are no longer connected to ORACLE
Please connect again.
Unable to start instance "ANAISMD3"
You must start instance "ANAISMD3" manually
Failed to convert database "ANAISMD3"
DGMGRL>
==> Here ist he listener.ora_ (I put the same for both ANAISMD2/ANAISMD3 with port 1541/1551). Note: DGB is the accepted extension for dgmgrl service (instead of DGMGRL as mentionned in documentation).
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL=TCP) (HOST=rh4-2a) (PORT=1541))
TRACE_LEVEL_LISTENER = ADMIN
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME=/home/oracle/product/11.1.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = ANAISMD2)
(GLOBAL_DBNAME = ANAISMD2.world)
(ORACLE_HOME=/home/oracle/product/11.1.0)
(SID_DESC =
(SID_NAME = ANAISMD2)
(GLOBAL_DBNAME = ANAISMD2_DGB.world)
(ORACLE_HOME=/home/oracle/product/11.1.0)
(SID_DESC =
(SID_NAME = ANAISMD3)
(GLOBAL_DBNAME = ANAISMD3_DGB.world)
(ORACLE_HOME=/home/oracle/product/11.1.0)
(SID_DESC =
(SID_NAME = ANAISMD3)
(GLOBAL_DBNAME = ANAISMD3.world)
(ORACLE_HOME=/home/oracle/product/11.1.0)
==> Here is the tnsnames.ora (I put the same for both ANAISMD2/ANAISMD3 with port 1541/1551).
ANAISMD2.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = rh4-2a)(PORT = 1541))
(CONNECT_DATA =
(SERVICE_NAME = ANAISMD2_DGB.world)
ANAISMD3.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = rh4-2a)(PORT = 1551))
(CONNECT_DATA =
(SERVICE_NAME = ANAISMD3_DGB.world)
==> Here is the sqlnet.ora (same on both):
TRACE_LEVEL_CLIENT = OFF
DIAG_ADR_ENABLED=FALSE
DIAG_DDE_ENABLED=FALSE
DIAG_SIGHANDLER_ENABLED=FALSE
names.directory_path = (TNSNAMES)
names.default_domain = world
name.default_zone = world
==>
==> List of services provided by the listener of ANAISMD2:
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 10-AUG-2009 16:39:36
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=rh4-2a)(PORT=1541)))
Services Summary...
Service "ANAISMD2.world" has 1 instance(s).
Instance "ANAISMD2", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
+"DEDICATED" established:0 refused:0+
LOCAL SERVER
Service "ANAISMD2_DGB.world" has 1 instance(s).
Instance "ANAISMD2", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
+"DEDICATED" established:3 refused:0+
LOCAL SERVER
Service "ANAISMD3.world" has 1 instance(s).
Instance "ANAISMD3", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
+"DEDICATED" established:0 refused:0+
LOCAL SERVER
Service "ANAISMD3_DGB.world" has 1 instance(s).
Instance "ANAISMD3", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
+"DEDICATED" established:0 refused:0+
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
+"DEDICATED" established:0 refused:0+
LOCAL SERVER
The command completed successfully
==> List of services provided by the listener of ANAISMD3:
Services Summary...
Service "ANAISMD2.world" has 2 instance(s).
Instance "ANAISMD2", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "ANAISMD2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
REMOTE SERVER
(ADDRESS=(PROTOCOL=TCP)(HOST=rh4-2)(PORT=1521))
Service "ANAISMD2_DGB.world" has 2 instance(s).
Instance "ANAISMD2", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "ANAISMD2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
REMOTE SERVER
(ADDRESS=(PROTOCOL=TCP)(HOST=rh4-2)(PORT=1521))
Service "ANAISMD2_XPT.world" has 1 instance(s).
Instance "ANAISMD2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
REMOTE SERVER
(ADDRESS=(PROTOCOL=TCP)(HOST=rh4-2)(PORT=1521))
Service "ANAISMD3.world" has 1 instance(s).
Instance "ANAISMD3", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "ANAISMD3_DGB.world" has 1 instance(s).
Instance "ANAISMD3", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully

You need to have static service registered with listener in this way. This is must because as you know when it converts db that time it shutsdown dbs also so all dynamic services are lost and dgmgrl is not ale to connect to db hence conversion fails.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = ORACLE_SID)
(GLOBAL_DBNAME=db_unique_name_DGMGRL.db_domain)
(ORACLE_HOME = /apps/oracle/product/11.1.0)
Plus with this make a entry in tnsnames.ora using service name from above or check from lsnrctl status look for service "db_unique_name_DGMGRL.db_domain"
e.g. this is my best practice how i give the names to tns entry
db_unique_name_DGMGRL =
(DESCRIPTION =
(SDU = 32767)
(ADDRESS = (PROTOCOL = TCP)(HOST = hostname)(PORT = port))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = db_unique_name_DGMGRL.db_domain)
Define same way in both primary and standby db.
Now use these tns entries to create configuration.
e.g.
create configuration prim_db as primary database is db_unique_name connect identifier is "db_unique_name_DGMGRL";
-- db_unique_name_DGMGRL from primary tns entry
add database stdby_db as connect identifier is "db_unique_name_DGMGRL" MAINTAINED AS PHYSICAL;
-- db_unique_name_DGMGRL from standby db tns entry
hope this will help

Connection to oracle database from sap R/3

Hello SAP Masters,
I do have two querries.
1) I want to download the data into oracle.
so is it possible in sap?
2)please explain me how in details?
3) I tried with DBCON .
4) But when I wrote program stating the name of the connection it is giving dump.
5) So can i get two things.
6) Some sample DBCON information.
7) And after this connection how to insert the data into oracle.ie native sql code
and abap code.
8) please can any one explain me with example in details or sample code?
Regards,
Prasad Dhaygude.

Hello Ajai,
Thanks raised to infinity.
Many thanks for sharing your valuable time for my querry.
Still I do have one querry as follows:
1) Actually I want to connect with the oracle database.
so I made entries like this:
database name:deepak_data
dbs: ora
username: prasad
connection information:oracle_server=ess-serverORACLE_DBNAME=INVOICE_02
now I want to ask you.
How to write native sql code in abap.
*& Report ZP                                                *
REPORT ZP.
TABLES: Zp,dbcon.
DATA: BEGIN OF IT_ITAB OCCURS 0,
      INV_NO LIKE Zp-INV_NO,
      AUBEL LIKE Zp-AUBEL,
      MATNR LIKE Zp-MATNR,
      FKIMG LIKE Zp-FKIMG,
      END OF IT_ITAB.
data:BEGIN OF IT_ITAB1 OCCURS 0,
     INV_NO like Zp-INV_NO,
     end of IT_ITAB1.
DATA: exc_ref TYPE REF TO cx_sy_native_sql_error,
error_text TYPE string.
DATA: WA LIKE IT_ITAB.
START-OF-SELECTION.
SELECT * FROM Zp INTO CORRESPONDING FIELDS OF TABLE IT_ITAB.
EXEC SQL.
CONNECT TO : invoice_02 USER df_truck USING df_truck
endexec.
EXEC SQL .
LOOP AT IT_ITAB.
INSERT INTO ZINVOICE_02 VALUES IT_ITAB.
ENDLOOP.
ENDEXEC.
*ENDFORM.
I wrote the code mentioned above.
But it states that field specification missing at the time of execution.
2) Please check the code and connect to statement also.
Can you please explain me with the help of sample code that how to write
connect to statement.
3) First of all I ll have to connect to database or oracle server on which oracle
database exists.
4) And then I ll have to insert the data from zinvoice02 into oracle table invoice_02.
5)Many Many thanks for your cooperation.
6) I wish you happy Navaratri and coming Dassera.
Regards,
Prasad.

Problem in connecting to database from webdynpro for java

Hi
I have a problem in connecting to database from webdynpro application
I am using oracle 10 express edition as database and was able to connect to database from a java application.But was unable to connect from a webdynpro for java.
<b>I guess webdynpro for java uses open sql instead of vendor sql(I looked in the visual admin ,DB is using open sql) so unable to connect to database.Am i right.?</b>
Do i need to make any settings in the visual admin to make it work?
How to solve this problem.Please give me pointers
Thanks
Bala

Hi,
For connecting to Oracle, either you can use the normal JDBC connectivty code directly which is given below :
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@Oracle_server_ip:Oracle port:SID of the Database","user_name","password");
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("your query");
In case you want to fetch data through ejbs, these are the steps to be followed :
1) Open the J2EE perspective
2) Create an EJB Module project
3) Right click on ejbModule, create a new EJB (select your EJB type)
4) While creating the ejb itself, you can add business methods by clicking Next in the UI. Another option is after creating the ejb, write the method in the bean, then select the method from ejb-jar.xml -> <bean name> ->method. Right click and select propogate to local & remote.
5) Double click on ejb-j2ee-engine.xml. select your bean and specify a Jndi name for eg: MyJndi.
6) Right click on the EJB project and add classes12.zip file (provided by Oracle) to its build path. (under libraries tab). Also check the same file under Order & Export.
7) Create an Enterprise Application project.
8) Right click on the EJB module project and select add to EAR project, then select the created EAR project.
9) Right click on the EJB project, select Build EJB Archive
10) Right click on the EAR project, select Build Application Archive
11) Open the WebDynpro perspective, open a new project, right click on the project ->properties. Do the following configurations :-
Java Build path - select the EJB project from projects , check the selected project under Order & Export
Project references select the EAR project
WebDynpro references select sharing references tab, click add & make an entry as : <vendor>/<EAR project name without .ear extension>
You can find the vendor name under application-j2ee-engine.xml file of the EAR project. By default it is sap.com. So if my EAR projects name is ABC, my entry would look like sap.com/ABC
12) Now the configurations are over and the EJB can be invoked by writing the client code inside the webdynpro component. Like:
InitialContext context = new InitialContext();
Object obj = context.lookup("MyJndi");
MyEJBHome home = MyEJBHome)PortableRemoteObject.narrow(obj,MyEJBHome.class);
MyEJB mybean = home.create();
int a = 0;
a= mybean.add(10,15);
wdContext.currentContextElement().setSum(a);
where MyEJB is my EJB name and MyJndi is my JNDI name
To connect to Oracle , you can write the usual Java code (given below) as a business methos of the ejb (similar to add() method in the example). And access it like mybean.<businessMethodName>().
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@Oracle_server_ip:Oracle port:SID of the Database","user_name","password");
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("your query");
Extracted from Re: Webdynpro and Oracle
http://help.sap.com/saphelp_webas630/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm
May be of use to understand the VA Conf /people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
Regards
Ayyapparaj

Accessing MsSQL Database from ABAP

Hi Guys,
I want to connect to an external MsSQL Database running in a window environment from an ABAP Report program where the SAP instance running in a Linux OS with DB2 as a Database. I tried all options suggested in all public forums like maintaining DBCON table entry & placing compatible dll files. I need answers from individuals who have done it in the recent past with this environment not beating bushes.
Thanks in advance.
Regards
Vijaya

hi,
see on oss note Question 4
Note 555223 - FAQ: Microsoft SQL Server
Q4: My SAP System runs under Oracle (DB2, SAPDB, ...) and I want to
exchange data with a non-SAP Microsoft SQL Server directly from ABAP.
Q4: My SAP System runs under Oracle (DB2, SAPDB, ...) and I want to exchange data with a non-SAP Microsoft SQL Server directly from ABAP. A4: The establishing and use of connections from an R/3 system to another non-SAP database (from the same vendor or not) is called multi-connect and is described in note 178949.
But you must have a specific application server running on Windows if you want to connect SAP to your Microsoft SQL server with DBCON.
Rgds
Edited by: stéphane mouraux on Feb 27, 2010 11:21 PM

Bug in the search database of Javahelp

Hi all,
in this project I am importing from Framemaker and generating Javahelp output. The Javahelp does not work when there are non-ASCII characters in the topic filenames (such as accents or umlauts). Therefore I have to adjust the file naming in the imort settings to "<$filename_no_ext>-<n>". As a result I get topics with numbered filenames and all seems well.
BUT with this setting the Javahelp displays the totally cryptic filenames of the topics as search results. Why does Robohelp not create a search database with the topic titles as search results?
How do you handle Javahelp projects for non-english languages?
Robert

I have the same problem. I have a registered domain name which contains a "-" character. Its not possible to set it correctly because it is filtered out. A "-" is an valid part of a domain name so why it is filtered? I have tried to edit the bootpd.plist file, but its getting overidden after a few seconds.
Could anyone help? A fix is absolutely necessary, without it I have to change the search domain on all client computers.

Re: searching database from a textfield entry

Similar Messages

Maybe you are looking for