Re: Tree Lines on an Outline Field

Actually, you can use the outline field in Forte R2 to mimic what you're
trying to do. True tree and list-view widgets are fully supported (quite
nicely, btw) in R3.
Basically, set up your subclass of displayNode to have an image data
attribute that is displayed on the widget. Then, create a few stock
tree-like bitmaps (like a vertical line, a vertical line with a horizontal
line, etc.). As the user expands and contracts the nodes in the outline
view, dynamically change the bimtap accordingly.
Hope this helps...
-Katie
Does anyone know if Forte can put the tree/branch lines on the hierarchical
structure of an outline field? I can get the outline/hierarchical structure
to display and work fine, but without the lines showing how nodes relate,
its hard to read.
Thanks.Wait for Release 3.

Does anyone know if Forte can put the tree/branch lines on the hierarchical
structure of an outline field? I can get the outline/hierarchical structure
to display and work fine, but without the lines showing how nodes relate,
its hard to read.
Thanks.Wait for Release 3.
Fred Scholldorf
Email: [email protected]
===

Similar Messages

  • Tree Lines on an Outline Field

    Does anyone know if Forte can put the tree/branch lines on the hierarchical
    structure of an outline field? I can get the outline/hierarchical structure
    to display and work fine, but without the lines showing how nodes relate,
    its hard to read.
    Thanks.

    Does anyone know if Forte can put the tree/branch lines on the hierarchical
    structure of an outline field? I can get the outline/hierarchical structure
    to display and work fine, but without the lines showing how nodes relate,
    its hard to read.
    Thanks.Wait for Release 3.
    Fred Scholldorf
    Email: [email protected]
    ===

  • How to outline fields that are blank?

    Hi,
    I am creating a report that has fields outlines. I have noticed if the field is empty the outline does not display. What can I do to make even the empty fields show the outline?
    Thanks,
    Trish

    Hi Trish,
    I'm not sure how you're applying the outline however in Crystal Report,  you can create a conditional formula to check if the value of the field isnull or blank.  For example if you were applying a line style around the field you can test with the following condition:
    1.  Right-click on the field.
    2.  Select Format Field.
    3.  Select the Border tab.
    4.  In the Line Style section,  click on the "X+2" icon and enter the following condition.
    if isnull({YOUR.FIELD}) or ({YOUR.FIELD}) = "" then 1 else 1
    Regards,
    Wallie

  • Tree Nodes has White Outline/Border

    Hi,
    I'm using an ADF tree located inside a panelGroupLayout.
    The panelGroupLayout has the background color "light blue".
    At runtime each tree node is displayed with a surrounding white outline and that can only appear when you have a background color different than white (in my case the panelGroupLayout is "light blue").
    Does anybody knows how to remove that outline? or to change its color?
    Thanks,
    Alain.

    Here are the skin seletors
    tr:tree Component
    Icon Selectors
    Name      Description
    af|tree::expanded-icon      This icon is displayed before the expanded tree node.
    af|tree::collapsed-icon      This icon is displayed before the collapsed tree node.
    af|tree::no-children-icon      This icon is displayed instead of the expanded/collapsed icon, when the node has no children
    af|tree::line-icon      This icon is used as a vertical line between the nodes.
    af|tree::line-middle-icon      This icon is used as the horizontal line in the background of the expand/collapse icon of the node, in the case the node is not the last sibling of its parent node.
    af|tree::line-last-icon      This icon is used as the horizontal line in the background of the expand/collapse icon of the node, in the case the node is the last sibling of its parent node.
    af|tree::node-icon      This icon selector is used in the case the Node class has a getNodeType() method that returns the node type as string. The nodetype gets added to this selector, separated by a ':'. If the node is a container (has children) the following suffixes get added depending on the expanded/collapsed state: '-expanded' / '-collapsed'. e.g. "af|tree::node-icon:container-collapsed", "af|tree::node-icon:container-expanded", "af|tree::node-icon:noncontainer".
    Trinidad properties
    Name      Description
    -tr-show-lines      Valid values are true or false (default true). Determines whether the tree lines are displayed or not. e.g., af|tree {-tr-show-lines:false} will not show the lines of the tree.Timo

  • Outline Field

    Dear All ,
    In our application we need to diaplay a heirarichical structure .The
    herarcical structure for the moment has only 4 levels.
    We are using an outline field to display this structure.
    1) Our requirements are.
    a) We should not have any restrictions on number of levels.
    b) When we double click on the root node it should load the data
    for the entire tree and display all the nodes.
    c) We should be able to show more than one image in each
    display node.
    requirement a) and c) are not a problem
    but the rquirement b) is problem , because sometimes we will have more
    than 6000 leaf nodes and each node might app represent a data of 300 bytes.
    So app we will have 20 mb of data loaded on the cleint. Since most of the
    client machine in the production environment is 32 mb , it runs out of
    memory.
    When user expands each level , each level appx has data ranging
    form 10-4000 nodes, the max range might grow up in future.
    Could you suggest me the best possible ways of implemention of handling
    massive data display with acceptable performance.
    Thank you in advance
    Always
    Ananth
    IBC Soln's India Pvt Ltd. , Bangalore
    My e-mail id is : [email protected] , [email protected]

    Dear All ,
    In our application we need to diaplay a heirarichical structure .The
    herarcical structure for the moment has only 4 levels.
    We are using an outline field to display this structure.
    1) Our requirements are.
    a) We should not have any restrictions on number of levels.
    b) When we double click on the root node it should load the data
    for the entire tree and display all the nodes.
    c) We should be able to show more than one image in each
    display node.
    requirement a) and c) are not a problem
    but the rquirement b) is problem , because sometimes we will have more
    than 6000 leaf nodes and each node might app represent a data of 300 bytes.
    So app we will have 20 mb of data loaded on the cleint. Since most of the
    client machine in the production environment is 32 mb , it runs out of
    memory.
    When user expands each level , each level appx has data ranging
    form 10-4000 nodes, the max range might grow up in future.
    Could you suggest me the best possible ways of implemention of handling
    massive data display with acceptable performance.
    Thank you in advance
    Always
    Ananth
    IBC Soln's India Pvt Ltd. , Bangalore
    My e-mail id is : [email protected] , [email protected]

  • Records are not getting imported due to new line charactor in the field

    Dear All,
    I am trying to load a file into target but the import is failing. The error thrown is as below;
    During the import of leads into CRMoD through loading the New lead/Step lead file received from CA, leads have not been imported and we encountered the following
    error message:
    "Import field 'LAST_NAME' had a blank value for the required Oracle CRM On Demand field 'Last Name'. This record was not imported. Please enter desired values for
    the required fields and re-import this record."
    Reason:
    Leads are not imported due to an additional new line (Enter) character, which results in the subsequent lines not being picked up and the error of import failure.
    Please help me to resolve this to remove the new line charactor in the field so that import succeeds..
    By the way, I am working on ODI 11g.
    Thanks in Advance
    Regards
    Santy

    While i was reading your post i remembered an issue that madded me. I don't know Oracle CRM, but a possible workaround could be to create a temporary Oracle table and load all data inside it. After that load in CRM only valid rows.

  • How can I use more lines to show a field of a row in a report?

    How can I use more lines to show a field of a row in a report? Table A have two columns: (c1 number(5),c2 varchar2(1000)).When I show the table on a report,the column c2 show itself in one row.So the width of html page is very wide.How can I split the field c2 to many lines?
    Thanks for any help.

    I was wondering if an answer was found for this one.
    I have the same problem using the default "Look 4" template for the region. I have found in the CSS file where it is defined and it specifies "nowrap" in the style, which is why the long value is not being split over multiple lines.
    So, my question is, without modifying or creating templates, is there a way to override the "nowrap" attribute from within the item definition? e.g. in the Column Attributes.Column Formatting.CSS Style field. I had some success changing the display properties, such as background colour and font size but I can't seen to override the nowrap attribute!

  • Decimal data in outline fields

    I have an Express-generated window with a nested outline field. The
    decimal data being displayed (Custom DecimalDomain with
    DecimalNullable datatype) is formatting in E-notation with values >=
    1,000,000. When I change the outline field to an array field the
    same number displays properly.
    I also changed the domain type to TextDomain and it displayed
    properly but is not suitable for our complex arithmetic operations.
    Can any tell me why outline fields for decimal types displays in
    E-notation and how to combat this problem? Thanks. Rich.
    [email protected]

    Hi,
    Go to SPRO>SAP Netweaver >General Settings> Check Units of Measurement, then click on "Units of Measure" (T.Code: CUNI) and Select your Unit of Measurement  and go to details put number 4 "Decimal Places" field (you can put 0 to 14 decimal places.
    Regards.
    Chinna

  • How we can show the xml data without any attribute in a flex tree (without having any label field) ?

    how we can show the following data in a flex tree (without having any
    label field) ?
    <?xml version="1.0"?>
    <rootNode>
            <childNode>
            < subchildNode >
                    <valueNode>1000</valueNode >
                    < valueNode >999-888-777</valueNode >
                    < valueNode >STORTZ</valueNode >
                    < valueNode >PAM STORTZ</valueNode >
                    < valueNode >88 ST. MORTON ROAD</valueNode>
            </subchildNode>
            </childNode >
    </rootNode >

    as is - no how
    wrap those xml chunk with a class having clear public properties like:
    public class dataRecord {
         protected var xml:XML;
         function dataRecord(xml:XML) {
              this.xml = xml;
         public function get id ():String {
              return XML(xml.descendants("valueNode")[0]).toString();
         // and so on
    simpliest way is to change xml structure to use attributes than wrapping that thing with AS code, it's time consuming and non efficient.

  • Decmal data in outline fields

    Fellow Forte' users,
    I am displaying decimal data in an outline field and want to do so to 4
    decimal places. The default in the outline field is 2 decimal places.
    Setting the scale of the decimal data attribute in the outline field display
    node init method doesn't work.
    The only way I can get 4 displayed is to use a TextData in the outline field
    and format the decimal into the TextData.
    Does anyone know a better, more direct way to do this?
    Regards,
    Glenn Wickham
    Hydro Electric Commission
    Australia
    [email protected]

    Hi Virendra,
    Thanks for the support, as per the guidance given by you i was able to link the desired field (E.g. Vendor Code) to one of the WBS Element User Field using WBS_USER_FIELDS_F4 BAdi. Further to this I have following requirements.
    1. Can I also appear the field description in front of the User Field (E.g. Name of the Vendor)
    2. Can I validate whether a User have entered a valid input to the User Field (i.e. Existing Vendor in the Vendor Master)
    3. Can I include a search window to search input values.
    Very much appreciate your help,
    Dileepa.

  • Keyboard in Outline Fields

    Hello.
    When using the keyboard to navigate in an outline field, it is possible
    to show a parent's children using the return key. Is there any way to
    close a parent up again using the keyboard?
    Tim Sawyer
    PanCredit
    Leeds, UK
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Forgot a bit.
    If you have a brand new outline field with no nodes in, and it has the
    focus, how can we get the default button to fire when return is pressed?
    Tim Sawyer
    PanCredit
    Leeds, UK
    From: Tim Sawyer
    Sent: 16 June 1998 12:20
    To: '[email protected]'
    Subject: Keyboard in Outline Fields
    Hello.
    When using the keyboard to navigate in an outline field, it is
    possible to show a parent's children using the return key. Is there
    any way to close a parent up again using the keyboard?
    Tim Sawyer
    PanCredit
    Leeds, UK
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • How to add extra lines in the address field?

    How, if possible, to add extra lines in the address field? For example, the street address might require two lines:
    Bob Smith
    Newport A  Unit 32
    Century Village
    Aventura, FL 

    Thanks, Barney! It's even easier than the solution I came to: copying and pasting into the field. 

  • Bouton reset pour potentiomètre linéaire

    Bonjour,
    Nous sommes en Terminale SSI, nous devons réaliser un projet (un pont en treillis) pour notre bac.
    Notre programme consiste à mesurer la flèche d'un pont (en maquette, balsa et un en PVC) à l'aide d'un potentiomètre linéaire. Le pont (en maquette) ne revient pas forcément à sa position initiale après que l'on ai enlevé des poids.
    Le programme marche cependant nous n'arrivons pas à réaliser un bouton reset nous permettant de conserver la valeur de sortie et de réinitialiser la valeur d'entrée tout en sachant que le potentiomètre garde la même tension en fonction de la distance parcourue par la borne mobile.
    Merci d'avance pour votre aide
    Bonne journée

    -Le potard nous permet de mesurer la flèche d'inclinaison d'un pont lorsque l'on pose différents poids dessus. Notre but étant de tester la résistance de plusieurs matériaux.
    -Le potard est monté sur une carte d'acquisition NY-DAQ. Celui-ci est accroché au pont.
    -La potard est calibrer afin que la valeur de la tension soit comprise entre 0 et 5 Volts.
    -Méthodologie de capture: ?
    -Algorithme de calcul :
    if (t>0&& t<5)
    D=t*11,51;
    Il est dans une boîte de calcul
    Voici le fichier du programme en entier
    Attachments:
    LABVIEW2 PPE.vi ‏82 KB
    PROGRA-PPE - Copie.jpg ‏202 KB

  • How do you make a 2D line form the outline of a circle.

    How do you make a 2D line form the outline of a circle. I want a line to come in from the side of the screen and bend round to form the outline of a circle. In flash pro cc?

    you can use one tween to move your line from the side of the screen, then another (shape) tween to bend it into a circle.  you will probably need to use shape hints for the 2nd tween.

  • How do i expand a field in a line with 3 other fields when forms design will not allow

    how do i expand a field in a line with 3 other fields when forms design will not allow it? I also want to shrink one of the fields and cannot do so.

    It is possible that all there is not enough room on your line to grow the field. You can try a few things :
    - Make the form width wider by dragging the right edge of the form or via the Form Setup dialog (File > Form Setup... and change the Form Width)
    - You can make other field on the row narrower (if they are not already at their minimum width).
    Each field type has a minimum width. What field type are you trying to make smaller?
    For example : Text and Multiline can go down to a width of 30. Dropdown min width depends on the length of the long item in the dropdown list.
    Hope this helps
    Gen

Maybe you are looking for