RE:Undo_management=MANUAL
Hi all!
I'm trying to create the rollback segment below but get the error shown. Even when i set undo_management=MANUAL & restart my PC or stop/start Oracle services, it remains AUTO. What else need i do plz.
Thnx!
SQL> create rollback segment test tablespace ts_vas_hr;
create rollback segment test tablespace ts_vas_hr
ERROR at line 1:
ORA-30019: Illegal rollback Segment operation in Automatic Undo mode
SQL>
SQL> show parameter undo_management
NAME TYPE VALUE
undo_management string AUTO
You are probably using spfile. So if you have changed the parameter undo_management in pfile,it wont be into effect.
Do this
1)Check that you are using spfle or not.Issue
sql>show parameter spfileThis would give sme value.If it does than you are using spfile
2)
alter system set undo_management=mnanual scope=spfile3{code{
startup forceOr shut immediate and than startup.
4show parameter undo
If its shows manual as the setting than retry uour operation.
HTH
Aman....
Similar Messages
-
Hi
We are performing system refresh from PRD system to another TST system.
Our PRD system currently running on oracle 9i ECC 5.0 and HP-UX platform..we have installed
new ECC 5.0 system with oracle 9i as TST system.
But our PRD system is having UNDO_MANAGEMENT=MANUAL and ROLLBACK_SEGMENTS=PRS_1 to PRS_15
and tablespace used is PSAPROLL.
Our newly created TST system is having UNDO_MANAGEMENT=AUTO AND UNDO_TABLESPACE=PSAPUNDO.
When we are trying to restore database and create controlfile ( Create controlfile SET database ...and so on) perform recovery ( recover datasabse using backu...until cancel)
...But when we give Alter database open resetlogs ... it terminate the Oracle instance and
reason in alertlog is unable to find PSAPUNDO tablespace.
currently We do not want to make any changes in PRD system ... do we need to switch to
manual Undomanagement on TST system first and then perform system copy..
Or simply change parameters UNDO_MANAGEMENT=MANUAL AND UNDO_TABLESPACE=PSAPROLL will
do the trick.
Please let me know at earliest currently my TST system is down and oracle instance terminated.
Edited by: ganesh rr on Oct 2, 2008 6:21 AM
Edited by: ganesh rr on Oct 2, 2008 6:30 AM
Subject modified by moderator
Read the "Rules of Engagement"
Edited by: Juan Reyes on Oct 3, 2008 10:59 AMThanks to all,
I have done changes as per note 600141 and my target DB is up and running now. -
Advantage for use undo_management MANUAL oracle 9i DWH
Hi,
I have a questions,
What is the advantage for use undo_management MANUAL oracle 9i in DWH vs undo_management AUTO?
I need to obtain the UNDO_BLOCK_PER_SEC, but when I try to obtain the information in the view v$undostat, appear "no rows selected", exist any form to obtain this information?
Thanks for your help!!
Regards!!To add to what SB said, do not tune what does not need tuning. That is, do not make changes till you have developed a case to support the change.
In order to learn how to work with rollback segments look in your DBA Administration manual. Since Oracle now puts the emphasis on automatic undo management I would look for an earlier version of the documentation set and reference it since there is probably more information in the manual where manual RBS management was the only method.
If you are a warehouse I would expect the number of users performing DML to be low and the update jobs to be large so I would expect a low number of large RBS segments to be allocated.
HTH -- Mark D Powell -- -
Switching forn AUTO undo_management to MANUAL
hi,
1) after AUTO undo_management installation, i will use RBS MANUAL. But when i set the undo_management to MANUAL the database don't start.
What's problem?
2)Where will us use the AUTO or the MANUAL method?
Regards.
Tark.Hi
You are right... I did a test... here the statement that I used for the switch:
connect / as sysdba
alter system set undo_management = manual scope = spfile;
shutdown
startup
create public rollback segment rbs0 tablespace system;
shutdown
startup
create tablespace rbs datafile '/tmp/rbs.dbf' size 10m;
create public rollback segment rbs1 tablespace rbs;
create public rollback segment rbs2 tablespace rbs;
create public rollback segment rbs3 tablespace rbs;
create public rollback segment rbs4 tablespace rbs;
alter rollback segment rbs1 online;
alter rollback segment rbs2 online;
alter rollback segment rbs3 online;
alter rollback segment rbs4 online;
alter rollback segment rbs0 offline;
Chris -
EM 10g - Listener does not show up on DB home, but is running. Why??
Oracle Version 10.2.0.1.0
Microsoft Windows Server 2003 R2 Server 5.2 Service Pack 2 (32-bit)
LSNRCTL> start LISTENER
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is D:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to D:\oracle\product\10.2.0\db_1\network\log\listener.log
Trace information written to D:\oracle\product\10.2.0\db_1\network\trace\listener.trc
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=us-as1.nti2.org)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 10.2.0.1.0 - Production
Start Date 22-OCT-2007 11:42:18
Uptime 0 days 0 hr. 0 min. 5 sec
Trace Level user
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Listener Log File D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listener Trace File D:\oracle\product\10.2.0\db_1\network\trace\listener.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=us-as1.nti2.org)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
========================================================
LSNRCTL> status LISTENER
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 10.2.0.1.0 - Production
Start Date 22-OCT-2007 11:42:18
Uptime 0 days 0 hr. 14 min. 8 sec
Trace Level user
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Listener Log File D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listener Trace File D:\oracle\product\10.2.0\db_1\network\trace\listener.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=us-as1.nti2.org)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl.us-as1.nti2.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.us-as1.nti2.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orcl_XPT.us-as1.nti2.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
======================================================
C:\Documents and Settings\pierrel>netstat -a
Active Connections
Proto Local Address Foreign Address State
TCP us-as1:smtp us-as1.nti2.org:0 LISTENING
TCP us-as1:http us-as1.nti2.org:0 LISTENING
TCP us-as1:nntp us-as1.nti2.org:0 LISTENING
TCP us-as1:epmap us-as1.nti2.org:0 LISTENING
TCP us-as1:microsoft-ds us-as1.nti2.org:0 LISTENING
TCP us-as1:nntps us-as1.nti2.org:0 LISTENING
TCP us-as1:kpop us-as1.nti2.org:0 LISTENING
TCP us-as1:1110 us-as1.nti2.org:0 LISTENING
TCP us-as1:1111 us-as1.nti2.org:0 LISTENING
TCP us-as1:1117 us-as1.nti2.org:0 LISTENING
TCP us-as1:1119 us-as1.nti2.org:0 LISTENING
TCP us-as1:1158 us-as1.nti2.org:0 LISTENING
TCP us-as1:1521 us-as1.nti2.org:0 LISTENING
==================================================
init.ora
# $Header: init.ora 25-jul-01.18:03:38 rajayar Exp $
# Copyright (c) 1991, 2001, Oracle Corporation. All rights reserved. */
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, use the
# same file for all instance. Place all instance-specific parameters
# at the end of the file using the <sid>.<parameter_name> = <value> syntax.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback segments,
# these must be specified differently for each instance, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own.
# replace "clustdb" with your database name
db_name = clustdb
compatible=9.0.0
db_files = 1024 # INITIAL
#INITIAL
#db_files=80
#SMALL
#DB_files=400
#MEDIUM
#db_files=1000
#LARGE
control_files = ("\\.\clustdb_control1", "\\.\clustdb_control2")
db_file_multiblock_read_count = 8 # INITIAL
# db_file_multiblock_read_count = 8
#SMALL
#db_file_multiblock_read_count = 16
#MEDIUM
#db_file_multiblock_read_count = 32
#LARGE
#Datawarehouse
db_block_size=8192
# Transaction processing
# db_block_size=4096
open_cursors=300
#Transaction processing
#sort_area_size=524288
#Datawarehouse
sort_area_size=1048576
large_pool_size=1048576 #Transaction processing, Datawarehouse
db_cache_size=50331648 #Datawarehouse, Transaction processing
java_pool_size=67108864 #Datawarehouse, Transaction processing
# db_block_buffers = 200 # INITIAL
# db_block_buffers=100 #SMALL
# db_block_buffers =550 # MEDIUM
# db_block_buffers=3200 #LARGE
#shared_pool_size = 52428800 # INITIAL
shared_pool_size = 67108864 # datewarehouse, transaction processing
log_checkpoint_interval = 10000
processes = 59 # INITIAL
# processes = 50
#SMALL
#processes = 100
#MEDIUM
#processes = 200
#LARGE
parallel_max_servers = 5
#SMALL
# parallel_max_servers = 4 x (number of CPUs)
#MEDIUM
# parallel_max_servers = 4 x (number of CPUs)
# LARGE
log_buffer = 8192 # INITIAL
#log_buffer = 8192
#SMALL
#log_buffer = 32768
#MEDIUM
#log_buffer = 163840
#LARGE
# audit_trail = true # if you want auditing
# timed_statistics = true # if you want timed statistics
max_dump_file_size = 10240 # limit trace file size to 10 K each
# Uncommenting the line below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest = %ORACLE_HOME%/admin/clustdb/arch
# log_archive_format = "%%ORACLE_SID%%T%TS%S.ARC"
# If using private rollback segments, place lines of the following
# form at the end of this file:
# <sid>.rollback_segments = (name1, name2)
# If using public rollback segments, define how many
# rollback segments each instance will pick up, using the formula
# # of rollback segments = transactions / transactions_per_rollback_segment
# In this example each instance will grab 40/10 = 4:
# transactions = 40
# transactions_per_rollback_segment = 10
# Global Naming -- enforce that a dblink has same name as the db it connects to
global_names = TRUE
# Edit and uncomment the following line to provide the suffix that will be
# appended to the db_name parameter (separated with a dot) and stored as the
# global database name when a database is created. If your site uses
# Internet Domain names for e-mail, then the part of your e-mail address after
# the '@' is a good candidate for this parameter value.
# db_domain = us.acme.com # global database name is db_name.db_domain
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = TRUE
# define directories to store trace and alert files
background_dump_dest=%ORACLE_HOME%/admin/clustdb/bdump
user_dump_dest=%ORACLE_HOME%/admin/clustdb/
db_block_size = 4096
remote_login_passwordfile = exclusive
# text_enable = TRUE
# The following parameters are needed for the Advanced Replication Option
job_queue_processes = 2
# job_queue_processes = 4 #datawarehouse
# job_queue_interval = 10
# job_queue_keep_connections = false
distributed_transactions = 5
open_links = 4
# The following parameters are instance-specific parameters that are
# specified for two instances named clustdb1 and clustdb2
undo_management=AUTO # For automatic undo management
# = MANUAL For manual/RBS undo management
cluster_database= true
cluster_database_instances=2
remote_listener=LISTENERS_CLUSTDB
# First instance specific parameters
clustdb1.thread=1
clustdb1.instance_name=clustdb1
clustdb1.instance_number=1
clustdb1.local_listener=listener_clustdb1
clustdb1.remote_login_passwordfile = exclusive
# Comment out clustdb1.undo_tablespace and uncomment clustdb1.rollback_segments
# when undo_management=MANUAL
clustdb1.undo_tablespace = UNDOTBS1
# clustdb1.rollback_segments = (rbs1_1,rbs1_2)
# Second instance specific parameters
clustdb2.thread=2
clustdb2.instance_name = clustdb2
clustdb2.instance_number = 2
clustdb2.local_listener = listener_clustdb2
clustdb2.remote_login_passwordfile = exclusive
# Comment out clustdb2.undo_tablespace and uncomment clustdb2.rollback_segments
# when undo_management=MANUAL
clustdb2.undo_tablespace = UNDOTBS2
# clustdb2.rollback_segments = (rbs2_1,rbs2_2)
===========================================
listener.ora
# listener.ora Network Configuration File: D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = us-as1.nti2.org)(PORT = 1521))
TRACE_LEVEL_LISTENER = USER
===============================================
sqlnet.ora
# sqlnet.ora Network Configuration File: D:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
=================================================
tnsnames.ora
# tnsnames.ora Network Configuration File: D:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = us-as1.nti2.org)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.us-as1.nti2.org)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
============================================================Enterprise manager still requires a static service definition in listener.ora and does not rely on dynamic registration.
From documentation:
The SID_LIST is required for backward compatibility with Oracle8 or Oracle7 databases, as well as external procedures and heterogeneous services, and some management tools, including Oracle Enterprise Manager.
Werner -
Restore using TSPITR Results Dead lock error
This is the step is followed but i am getting deadlock error .please give your valuable suggestion .
Product Used:oracle 11g in linux environmnet
1)Before taking backup get SCN number for restore.
Command applied: Select current_scn from v$database;
2)running Full backup of database
Command applied:
configure controlfile autobackup on;
backup database;
CROSSCHECK BACKUP;
exit;
3)Running level 0 incremental backup
Command applied:
BACKUP AS COMPRESSED BACKUPSET INCREMENTAL LEVEL 0 TAG ='WEEKLY' TABLESPACE TEST;
exit;
3) Running level 1 incremental backup
Command applied:
BACKUP AS COMPRESSED BACKUPSET INCREMENTAL LEVEL 1 TAG ='DAILY' TABLESPACE TEST;
4)Before Restore(TSPITR) following procedure are applied under sysdba privilege
Command applied:
SQL 'exec dbms_backup_restore.manageauxinstance ('TSPITR',1)';
5)TSPITR Restore command
Command applied:
run
SQL 'ALTER TABLESPACE TEST OFFLINE'
RECOVER TABLESPACE TEST UNTIL SCN 1791053 AUXILIARY DESTINATION '/opt/oracle/base/flash_recovery_area';
SQL 'ALTER TABLESPACE TEST ONLINE';
and i tried with this option also(the same error i was getting)
Command applied:
run
SQL 'ALTER TABLESPACE TEST OFFLINE';
SET UNTIL SCN 1912813;
RESTORE TABLESPACE TEST ;
RECOVER TABLESPACE TEST UNTIL SCN 1912813 AUXILIARY DESTINATION '/opt/oracle/base/flash_recovery_area';
SQL 'ALTER TABLESPACE TEST ONLINE';
The follwing error i get for above mentioned restore command
Recovery Manager: Release 11.2.0.1.0 - Production on Tue Aug 17 18:11:18 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: NEW10 (DBID=2860680927)
RMAN> run
2> {
3> SQL 'ALTER TABLESPACE TEST OFFLINE';
4> RECOVER TABLESPACE TEST UNTIL SCN 1791053 AUXILIARY DESTINATION '/opt/oracle/base/flash_recovery_area';
5> SQL 'ALTER TABLESPACE TEST ONLINE';
6> }
7>
using target database control file instead of recovery catalog
sql statement: ALTER TABLESPACE TEST OFFLINE
Starting recover at 17-AUG-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=404 device type=DISK
RMAN-05026: WARNING: presuming following set of tablespaces applies to specified point-in-time
List of tablespaces expected to have UNDO segments
Tablespace SYSTEM
Tablespace UNDOTBS1
Creating automatic instance, with SID='BkAq'
initialization parameters used for automatic instance:
db_name=NEW10
db_unique_name=BkAq_tspitr_NEW10
compatible=11.2.0.0.0
db_block_size=8192
db_files=200
sga_target=280M
processes=50
db_create_file_dest=/opt/oracle/base/flash_recovery_area
log_archive_dest_1='location=/opt/oracle/base/flash_recovery_area'
#No auxiliary parameter file used
starting up automatic instance NEW10
Oracle instance started
Total System Global Area 292933632 bytes
Fixed Size 1336092 bytes
Variable Size 100666596 bytes
Database Buffers 184549376 bytes
Redo Buffers 6381568 bytes
Automatic instance created
Running TRANSPORT_SET_CHECK on recovery set tablespaces
TRANSPORT_SET_CHECK completed successfully
contents of Memory Script:
# set requested point in time
set until scn 1791053;
# restore the controlfile
restore clone controlfile;
# mount the controlfile
sql clone 'alter database mount clone database';
# archive current online log
sql 'alter system archive log current';
# avoid unnecessary autobackups for structural changes during TSPITR
sql 'begin dbms_backup_restore.AutoBackupFlag(FALSE); end;';
executing Memory Script
executing command: SET until clause
Starting restore at 17-AUG-10
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=59 device type=DISK
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /opt/oracle/base/flash_recovery_area/NEW10/autobackup/2010_08_17/o1_mf_s_727280767_66nmo8x7_.bkp
channel ORA_AUX_DISK_1: piece handle=/opt/oracle/base/flash_recovery_area/NEW10/autobackup/2010_08_17/o1_mf_s_727280767_66nmo8x7_.bkp tag=TAG20100817T142607
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/opt/oracle/base/flash_recovery_area/NEW10/controlfile/o1_mf_66o0wsh8_.ctl
Finished restore at 17-AUG-10
sql statement: alter database mount clone database
sql statement: alter system archive log current
sql statement: begin dbms_backup_restore.AutoBackupFlag(FALSE); end;
contents of Memory Script:
# set requested point in time
set until scn 1791053;
# set destinations for recovery set and auxiliary set datafiles
set newname for clone datafile 1 to new;
set newname for clone datafile 8 to new;
set newname for clone datafile 3 to new;
set newname for clone datafile 2 to new;
set newname for clone datafile 9 to new;
set newname for clone tempfile 1 to new;
set newname for datafile 7 to
"/opt/oracle/base/oradata/NEW10/test01.dbf";
# switch all tempfiles
switch clone tempfile all;
# restore the tablespaces in the recovery set and the auxiliary set
restore clone datafile 1, 8, 3, 2, 9, 7;
switch clone datafile all;
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
renamed tempfile 1 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_temp_%u_.tmp in control file
Starting restore at 17-AUG-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00001 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00008 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00003 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_undotbs1_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00002 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00009 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_%u_.dbf
channel ORA_AUX_DISK_1: reading from backup piece /opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnndf_TAG20100817T140128_66nl7174_.bkp
channel ORA_AUX_DISK_1: piece handle=/opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnndf_TAG20100817T140128_66nl7174_.bkp tag=TAG20100817T140128
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:02:45
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00007 to /opt/oracle/base/oradata/NEW10/test01.dbf
channel ORA_AUX_DISK_1: reading from backup piece /opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnnd0_WEEKLY_66nl9m8k_.bkp
channel ORA_AUX_DISK_1: piece handle=/opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnnd0_WEEKLY_66nl9m8k_.bkp tag=WEEKLY
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:06:55
Finished restore at 17-AUG-10
datafile 1 switched to datafile copy
input datafile copy RECID=6 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_66o0x1sf_.dbf
datafile 8 switched to datafile copy
input datafile copy RECID=7 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_66o0x1r9_.dbf
datafile 3 switched to datafile copy
input datafile copy RECID=8 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_undotbs1_66o0x1vr_.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=9 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_66o0x1vj_.dbf
datafile 9 switched to datafile copy
input datafile copy RECID=10 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_66o0x1rs_.dbf
contents of Memory Script:
# set requested point in time
set until scn 1791053;
# online the datafiles restored or switched
sql clone "alter database datafile 1 online";
sql clone "alter database datafile 8 online";
sql clone "alter database datafile 3 online";
sql clone "alter database datafile 2 online";
sql clone "alter database datafile 9 online";
sql clone "alter database datafile 7 online";
# recover and open resetlogs
recover clone database tablespace "TEST", "SYSTEM", "UNDOTBS1", "SYSAUX" delete archivelog;
alter clone database open resetlogs;
executing Memory Script
executing command: SET until clause
sql statement: alter database datafile 1 online
sql statement: alter database datafile 8 online
sql statement: alter database datafile 3 online
sql statement: alter database datafile 2 online
sql statement: alter database datafile 9 online
sql statement: alter database datafile 7 online
Starting recover at 17-AUG-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting incremental datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
destination for restore of datafile 00007: /opt/oracle/base/oradata/NEW10/test01.dbf
channel ORA_AUX_DISK_1: reading from backup piece /opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnnd1_DAILY_66nmf6qs_.bkp
channel ORA_AUX_DISK_1: piece handle=/opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnnd1_DAILY_66nmf6qs_.bkp tag=DAILY
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
starting media recovery
archived log for thread 1 with sequence 39 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_39_66nmc1dg_.arc
archived log for thread 1 with sequence 40 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_40_66nmcfw4_.arc
archived log for thread 1 with sequence 41 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_41_66nmcwcf_.arc
archived log for thread 1 with sequence 42 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_42_66nmddbw_.arc
archived log for thread 1 with sequence 43 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_43_66o0wyys_.arc
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_39_66nmc1dg_.arc thread=1 sequence=39
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_40_66nmcfw4_.arc thread=1 sequence=40
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_41_66nmcwcf_.arc thread=1 sequence=41
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_42_66nmddbw_.arc thread=1 sequence=42
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_43_66o0wyys_.arc thread=1 sequence=43
media recovery complete, elapsed time: 00:00:50
Finished recover at 17-AUG-10
database opened
contents of Memory Script:
# make read only the tablespace that will be exported
sql clone 'alter tablespace TEST read only';
# create directory for datapump import
sql "create or replace directory TSPITR_DIROBJ_DPDIR as ''
/opt/oracle/base/flash_recovery_area''";
# create directory for datapump export
sql clone "create or replace directory TSPITR_DIROBJ_DPDIR as ''
/opt/oracle/base/flash_recovery_area''";
executing Memory Script
sql statement: alter tablespace TEST read only
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/opt/oracle/base/flash_recovery_area''
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/opt/oracle/base/flash_recovery_area''
Performing export of metadata...
EXPDP> Starting "SYS"."TSPITR_EXP_BkAq":
EXPDP> Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
EXPDP> Processing object type TRANSPORTABLE_EXPORT/TABLE
EXPDP> Processing object type TRANSPORTABLE_EXPORT/GRANT/OWNER_GRANT/OBJECT_GRANT
EXPDP> Processing object type TRANSPORTABLE_EXPORT/INDEX
EXPDP> Processing object type TRANSPORTABLE_EXPORT/CONSTRAINT/CONSTRAINT
EXPDP> Processing object type TRANSPORTABLE_EXPORT/INDEX_STATISTICS
EXPDP> Processing object type TRANSPORTABLE_EXPORT/TRIGGER
EXPDP> Processing object type TRANSPORTABLE_EXPORT/TABLE_STATISTICS
EXPDP> Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
EXPDP> Master table "SYS"."TSPITR_EXP_BkAq" successfully loaded/unloaded
EXPDP> ******************************************************************************
EXPDP> Dump file set for SYS.TSPITR_EXP_BkAq is:
EXPDP> /opt/oracle/base/flash_recovery_area/tspitr_BkAq_82690.dmp
EXPDP> ******************************************************************************
EXPDP> Datafiles required for transportable tablespace TEST:
EXPDP> /opt/oracle/base/oradata/NEW10/test01.dbf
EXPDP> Job "SYS"."TSPITR_EXP_BkAq" successfully completed at 18:25:02
Export completed
contents of Memory Script:
# shutdown clone before import
shutdown clone immediate
# drop target tablespaces before importing them back
sql 'drop tablespace TEST including contents keep datafiles';
executing Memory Script
database closed
database dismounted
Oracle instance shut down
sql statement: drop tablespace TEST including contents keep datafiles
Removing automatic instance
shutting down automatic instance
target database instance not started
Automatic instance removed
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_temp_66o1k480_.tmp deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/onlinelog/o1_mf_3_66o1k0mg_.log deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/onlinelog/o1_mf_2_66o1jyt4_.log deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/onlinelog/o1_mf_1_66o1jx3w_.log deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_66o0x1rs_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_66o0x1vj_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_undotbs1_66o0x1vr_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_66o0x1r9_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_66o0x1sf_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/controlfile/o1_mf_66o0wsh8_.ctl deleted
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/17/2010 18:25:36
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of sql command on default channel at 08/17/2010 18:25:25
RMAN-11003: failure during parse/execution of SQL statement: drop tablespace TEST including contents keep datafiles
ORA-00604: error occurred at recursive SQL level 1
ORA-00060: deadlock detected while waiting for resource
Recovery Manager complete.
please give your valuable suggestion .It should be more helpful for us.
Edited by: user10750009 on Aug 20, 2010 1:07 AM
Edited by: user10750009 on Aug 20, 2010 1:15 AMI want TSPITR ,during this operation i faced this deadlock error.
Before that we faced roll backsegment error for that we applied follwing workaround .
If i applied follwing workaround before every backup and restore .i didn't get any error .all things went successful.
spool /tmp/Createtest.log
connect / as sysdba
REM Perform startup in case we are still down
ALTER SYSTEM SET PROCESSES=500 SCOPE=SPFILE;
SHUT IMMEDIATE;
STARTUP MOUNT EXCLUSIVE;
ALTER DATABASE ARCHIVELOG;
ARCHIVE LOG START;
ALTER DATABASE OPEN;
connECT / as sysdba;
alter system set undo_management = MANUAL scope=spfile;
shutdown immediate;
startup;
Connect / as sysdba;
DROP TABLE TEST123;
create table test123 (t1 number, t2 varchar2(10));
begin
for i in 1.. 300000 loop
insert into test values (i,'AAAAAAAAAA');
end loop;
end;
delete test123;
commit;
alter system set undo_management = auto scope=spfile;
shutdown immediate ;
startup ;
The above workaround we applied before creating tablespace and datafile ,after that we face some dead lock error while restore TSPITR .Did you need any more information
Edited by: user10750009 on Aug 20, 2010 1:12 AM -
PMON (ospid: 8143): terminating the instance due to error 472
Hi Friends,
My Environment_
OS : oel4u5
Apps Version : R12.1.1
DB Version : *11.1.0.7*
When i am trying to start my ebiz 11g database the db started and its automatically going down because of PMON termination. When am looking in to the alert log files its showing the below ora-600 errors,
Resuming block recovery (PMON) for file 4 block 180627
Block recovery from logseq 125, block 70 to scn 10132192035480
Recovery of Online Redo Log: Thread 1 Group 2 Seq 125 Reading mem 0
Mem# 0: /ebiz/oracle/db/apps_st/data/log2.dbf
Block recovery completed at rba 125.281.16, scn 2359.364184220
Errors in file /ebiz/oracle/db/tech_st/11.1.0/admin/TEST05_erptest05/diag/rdbms/test05/TEST05/trace/TEST05_pmon_8143.trc (incident=49647):
ORA-00600: internal error code, arguments: [4194], [41], [37], [], [], [], [], [], [], [], [], []
Errors in file /ebiz/oracle/db/tech_st/11.1.0/admin/TEST05_erptest05/diag/rdbms/test05/TEST05/trace/TEST05_pmon_8143.trc:
ORA-00600: internal error code, arguments: [4194], [41], [37], [], [], [], [], [], [], [], [], []
PMON (ospid: 8143): terminating the instance due to error 472
Instance terminated by PMON, pid = 8143
Following error which i found in the trace file /ebiz/oracle/db/tech_st/11.1.0/admin/TEST05_erptest05/diag/rdbms/test05/TEST05/trace/TEST05_pmon_8143.trc
(call) sess: cur 5f1efd10, rec 5f1e5ff0, usr 5f1efd10; depth: 0
ksudlc FALSE at location: 6
(k2g table)
error 472 detected in background process
ORA-00600: internal error code, arguments: [4194], [41], [37], [], [], [], [], [], [], [], [], []
*** 2011-11-27 20:19:33.113
PMON (ospid: 8143): terminating the instance due to error 472
Kindly Suggest me,
Thanks
AthishHi Helios,
We identified that the error was in undo corruption and We followed the below steps to over come above mention error.
Steps as followed,
Step 1:
SQL> SELECT name,value FROM v$parameter WHERE name IN ('undo_management','undo_tablespace');
NAME VALUE
undo_management MANUAL
undo_tablespace UNDO_TBS
Step2:
SQL> select FILE_NAME, TABLESPACE_NAME from dba_data_files where TABLESPACE_NAME like 'UNDO%';
FILE_NAME TABLESPACE_NAME
/ebiz/oracle/db/apps_st/data/undotbs_02.dbf UNDO_TBS
/ebiz/oracle/db/apps_st/data/undotbs_01.dbf UNDO_TBS
Step 3: Create a new undo tablespace
SQL> create UNDO tablespace UNDOTBS datafile '/ebiz/oracle/db/apps_st/data/undotbs01.dbf' size 1024m REUSE AUTOEXTEND ON NEXT 4096K MAXSIZE 1024M;
Tablespace created.
Step 4:
SQL> ALTER SYSTEM SET undo_tablespace = 'UNDOTBS' scope=spfile;
System altered.
Step 5: set old undo tablespace offine mode and drop
SQL> ALTER TABLESPACE UNDO_TBS offline;
Tablespace altered.
SQL> drop tablespace UNDO_TBS including contents and datafiles;
Tablespace dropped.
Step 6:
Rebounced the db services
Step 7: Changed the undo management parameter to AUTO
SQL> alter system set undo_management='AUTO' scope=spfile;
System altered.
SQL> SELECT name,value FROM v$parameter WHERE name IN ('undo_management','undo_tablespace');
NAME VALUE
undo_management AUTO
undo_tablespace UNDOTBS
Now the database is up and running with no issue and we cant find any ora error in the alert log file,
ThaNks
Athish -
Oracle 9i - Database closed while normal use
Hi all,
I have big problem with my 9i database. One of my sid get closed (sort of shutdown) while we're using it. I have no trace in alert, and no trace dumped.
I don't what to do ? I have tried new allocation of space memory... Dont' work.
It shutdown (no trace of this shutdown ot any error in alert) and I just restart it and it go ok for a while. When it get closed, there's no special things running on it, just normal activity.
Do you have any idea on what I must do to know a little bit more from where the problem is ?
ThanksNothing interesting on the events on the server. That's my problem.
It's a local storage. No bay. just raid 0 + 1
Here is a part of my alert
ARC1: Evaluating archive log 2 thread 1 sequence 16918
ARC1: Beginning to archive log 2 thread 1 sequence 16918
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16918.ARC'
Tue Dec 12 09:58:53 2006
ARC1: Completed archiving log 2 thread 1 sequence 16918
Tue Dec 12 10:16:20 2006
Thread 1 advanced to log sequence 16920
Tue Dec 12 10:16:20 2006
Current log# 1 seq# 16920 mem# 0: E:\ANTI\REDO\REDO01.LOG
Tue Dec 12 10:16:21 2006
ARC0: Evaluating archive log 4 thread 1 sequence 16919
Tue Dec 12 10:16:21 2006
ARC0: Beginning to archive log 4 thread 1 sequence 16919
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16919.ARC'
Tue Dec 12 10:16:31 2006
ARC0: Completed archiving log 4 thread 1 sequence 16919
Tue Dec 12 10:17:12 2006
Thread 1 advanced to log sequence 16921
Current log# 3 seq# 16921 mem# 0: E:\ANTI\REDO\REDO03.LOG
Tue Dec 12 10:17:12 2006
ARC1: Evaluating archive log 1 thread 1 sequence 16920
ARC1: Beginning to archive log 1 thread 1 sequence 16920
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16920.ARC'
ARC1: Completed archiving log 1 thread 1 sequence 16920
Tue Dec 12 10:18:10 2006
Thread 1 advanced to log sequence 16922
Current log# 2 seq# 16922 mem# 0: E:\ANTI\REDO\REDO02.LOG
Tue Dec 12 10:18:10 2006
ARC0: Evaluating archive log 3 thread 1 sequence 16921
ARC0: Beginning to archive log 3 thread 1 sequence 16921
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16921.ARC'
ARC0: Completed archiving log 3 thread 1 sequence 16921
Tue Dec 12 10:33:38 2006
Thread 1 advanced to log sequence 16923
Tue Dec 12 10:33:38 2006
Current log# 4 seq# 16923 mem# 0: E:\ANTI\REDO\REDO04.LOG
Tue Dec 12 10:33:39 2006
ARC1: Evaluating archive log 2 thread 1 sequence 16922
Tue Dec 12 10:33:39 2006
ARC1: Beginning to archive log 2 thread 1 sequence 16922
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16922.ARC'
ARC1: Completed archiving log 2 thread 1 sequence 16922
Tue Dec 12 10:46:37 2006
Thread 1 advanced to log sequence 16924
Current log# 1 seq# 16924 mem# 0: E:\ANTI\REDO\REDO01.LOG
Tue Dec 12 10:46:37 2006
ARC0: Evaluating archive log 4 thread 1 sequence 16923
ARC0: Beginning to archive log 4 thread 1 sequence 16923
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16923.ARC'
Tue Dec 12 10:46:47 2006
ARC0: Completed archiving log 4 thread 1 sequence 16923
Tue Dec 12 10:47:40 2006
Thread 1 advanced to log sequence 16925
Current log# 3 seq# 16925 mem# 0: E:\ANTI\REDO\REDO03.LOG
Tue Dec 12 10:47:40 2006
ARC1: Evaluating archive log 1 thread 1 sequence 16924
ARC1: Beginning to archive log 1 thread 1 sequence 16924
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16924.ARC'
Tue Dec 12 10:47:50 2006
ARC1: Completed archiving log 1 thread 1 sequence 16924
Tue Dec 12 10:48:23 2006
Thread 1 advanced to log sequence 16926
Current log# 2 seq# 16926 mem# 0: E:\ANTI\REDO\REDO02.LOG
Tue Dec 12 10:48:23 2006
ARC0: Evaluating archive log 3 thread 1 sequence 16925
ARC0: Beginning to archive log 3 thread 1 sequence 16925
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16925.ARC'
Tue Dec 12 10:48:33 2006
ARC0: Completed archiving log 3 thread 1 sequence 16925
Tue Dec 12 10:48:42 2006
Thread 1 advanced to log sequence 16927
Current log# 4 seq# 16927 mem# 0: E:\ANTI\REDO\REDO04.LOG
Tue Dec 12 10:48:42 2006
ARC1: Evaluating archive log 2 thread 1 sequence 16926
ARC1: Beginning to archive log 2 thread 1 sequence 16926
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16926.ARC'
Tue Dec 12 10:48:52 2006
ARC1: Completed archiving log 2 thread 1 sequence 16926
Tue Dec 12 10:49:00 2006
Thread 1 advanced to log sequence 16928
Current log# 1 seq# 16928 mem# 0: E:\ANTI\REDO\REDO01.LOG
Tue Dec 12 10:49:00 2006
ARC0: Evaluating archive log 4 thread 1 sequence 16927
ARC0: Beginning to archive log 4 thread 1 sequence 16927
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16927.ARC'
Tue Dec 12 10:49:11 2006
ARC0: Completed archiving log 4 thread 1 sequence 16927
Tue Dec 12 10:49:21 2006
Thread 1 advanced to log sequence 16929
Current log# 3 seq# 16929 mem# 0: E:\ANTI\REDO\REDO03.LOG
Tue Dec 12 10:49:21 2006
ARC1: Evaluating archive log 1 thread 1 sequence 16928
ARC1: Beginning to archive log 1 thread 1 sequence 16928
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16928.ARC'
Tue Dec 12 10:49:32 2006
ARC1: Completed archiving log 1 thread 1 sequence 16928
Tue Dec 12 10:49:51 2006
Thread 1 advanced to log sequence 16930
Current log# 2 seq# 16930 mem# 0: E:\ANTI\REDO\REDO02.LOG
Tue Dec 12 10:49:51 2006
ARC0: Evaluating archive log 3 thread 1 sequence 16929
ARC0: Beginning to archive log 3 thread 1 sequence 16929
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16929.ARC'
Tue Dec 12 10:50:01 2006
ARC0: Completed archiving log 3 thread 1 sequence 16929
Tue Dec 12 10:56:17 2006
Thread 1 advanced to log sequence 16931
Current log# 4 seq# 16931 mem# 0: E:\ANTI\REDO\REDO04.LOG
Tue Dec 12 10:56:17 2006
ARC1: Evaluating archive log 2 thread 1 sequence 16930
ARC1: Beginning to archive log 2 thread 1 sequence 16930
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16930.ARC'
Tue Dec 12 10:56:27 2006
ARC1: Completed archiving log 2 thread 1 sequence 16930
Tue Dec 12 10:56:36 2006
Thread 1 advanced to log sequence 16932
Current log# 1 seq# 16932 mem# 0: E:\ANTI\REDO\REDO01.LOG
Tue Dec 12 10:56:36 2006
ARC0: Evaluating archive log 4 thread 1 sequence 16931
ARC0: Beginning to archive log 4 thread 1 sequence 16931
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16931.ARC'
Tue Dec 12 10:56:46 2006
ARC0: Completed archiving log 4 thread 1 sequence 16931
Tue Dec 12 10:56:51 2006
Thread 1 advanced to log sequence 16933
Current log# 3 seq# 16933 mem# 0: E:\ANTI\REDO\REDO03.LOG
Tue Dec 12 10:56:51 2006
ARC1: Evaluating archive log 1 thread 1 sequence 16932
ARC1: Beginning to archive log 1 thread 1 sequence 16932
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16932.ARC'
Tue Dec 12 10:57:01 2006
ARC1: Completed archiving log 1 thread 1 sequence 16932
Tue Dec 12 11:11:02 2006
Thread 1 advanced to log sequence 16934
Tue Dec 12 11:11:02 2006
Current log# 2 seq# 16934 mem# 0: E:\ANTI\REDO\REDO02.LOG
Tue Dec 12 11:11:03 2006
ARC0: Evaluating archive log 3 thread 1 sequence 16933
Tue Dec 12 11:11:03 2006
ARC0: Beginning to archive log 3 thread 1 sequence 16933
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16933.ARC'
ARC0: Completed archiving log 3 thread 1 sequence 16933
Tue Dec 12 11:47:35 2006
Thread 1 advanced to log sequence 16935
Tue Dec 12 11:47:35 2006
Current log# 4 seq# 16935 mem# 0: E:\ANTI\REDO\REDO04.LOG
Tue Dec 12 11:47:36 2006
ARC1: Evaluating archive log 2 thread 1 sequence 16934
Tue Dec 12 11:47:36 2006
ARC1: Beginning to archive log 2 thread 1 sequence 16934
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16934.ARC'
Tue Dec 12 11:47:46 2006
ARC1: Completed archiving log 2 thread 1 sequence 16934
Tue Dec 12 12:34:33 2006
Thread 1 advanced to log sequence 16936
Current log# 1 seq# 16936 mem# 0: E:\ANTI\REDO\REDO01.LOG
Tue Dec 12 12:34:33 2006
ARC0: Evaluating archive log 4 thread 1 sequence 16935
ARC0: Beginning to archive log 4 thread 1 sequence 16935
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16935.ARC'
Tue Dec 12 12:34:43 2006
ARC0: Completed archiving log 4 thread 1 sequence 16935
Tue Dec 12 13:33:55 2006
Thread 1 advanced to log sequence 16937
Tue Dec 12 13:33:55 2006
Current log# 3 seq# 16937 mem# 0: E:\ANTI\REDO\REDO03.LOG
Tue Dec 12 13:33:56 2006
ARC1: Evaluating archive log 1 thread 1 sequence 16936
Tue Dec 12 13:33:56 2006
ARC1: Beginning to archive log 1 thread 1 sequence 16936
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16936.ARC'
Tue Dec 12 13:34:06 2006
ARC1: Completed archiving log 1 thread 1 sequence 16936
Tue Dec 12 14:23:58 2006
Thread 1 advanced to log sequence 16938
Tue Dec 12 14:23:58 2006
Current log# 2 seq# 16938 mem# 0: E:\ANTI\REDO\REDO02.LOG
Tue Dec 12 14:23:59 2006
ARC0: Evaluating archive log 3 thread 1 sequence 16937
Tue Dec 12 14:23:59 2006
ARC0: Beginning to archive log 3 thread 1 sequence 16937
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16937.ARC'
ARC0: Completed archiving log 3 thread 1 sequence 16937
Tue Dec 12 15:01:00 2006
Thread 1 advanced to log sequence 16939
Tue Dec 12 15:01:00 2006
Current log# 4 seq# 16939 mem# 0: E:\ANTI\REDO\REDO04.LOG
Tue Dec 12 15:01:01 2006
ARC1: Evaluating archive log 2 thread 1 sequence 16938
Tue Dec 12 15:01:01 2006
ARC1: Beginning to archive log 2 thread 1 sequence 16938
Creating archive destination LOG_ARCHIVE_DEST_1: 'G:\ANTI\ARCHIVE\A16938.ARC'
Tue Dec 12 15:01:11 2006
ARC1: Completed archiving log 2 thread 1 sequence 16938
Dump file d:\oracle\admin\anti\bdump\alert_anti.log
Tue Dec 12 15:09:43 2006
ORACLE V9.2.0.4.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.2 Service Pack 1, CPU type 586
Tue Dec 12 15:09:43 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 2
Using log_archive_dest parameter default value
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.4.0.
System parameters with non-default values:
processes = 300
timed_statistics = FALSE
shared_pool_size = 402653184
sga_max_size = 1418275328
shared_pool_reserved_size= 20132659
large_pool_size = 134217728
java_pool_size = 0
pre_page_sga = FALSE
trace_enabled = FALSE
nls_date_format = DD/MON/RR
control_files = D:\ORACLE\ORADATA\ANTI\control01.ctl, D:\ORACLE\ORADATA\ANTI\control02.ctl, D:\ORACLE\ORADATA\ANTI\control03.ctl, I:\ORACLE\ORADATA\ANTI\control04.ctl, I:\ORACLE\ORADATA\ANTI\control05.ctl, I:\ORACLE\ORADATA\ANTI\control06.ctl
db_block_size = 8192
db_cache_size = 822083584
compatible = 9.2.0.0.0
log_archive_start = TRUE
log_archive_dest_1 = location=G:\anti\archive
log_archive_dest_2 =
log_archive_dest_state_2 = defer
log_archive_format = A%S.ARC
log_buffer = 32768
db_file_multiblock_read_count= 16
fast_start_mttr_target = 300
undo_management = MANUAL
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = anti
cursor_space_for_time = TRUE
session_cached_cursors = 50
utl_file_dir = *
job_queue_processes = 10
hash_join_enabled = TRUE
hash_area_size = 1048576
background_dump_dest = D:\Oracle\admin\anti\bdump
user_dump_dest = D:\Oracle\admin\anti\udump
core_dump_dest = D:\Oracle\admin\anti\cdump
sort_area_size = 524288
db_name = anti
open_cursors = 300
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 209715200
statistics_level = TYPICAL
aq_tm_processes = 1
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
CJQ0 started with pid=8
QMN0 started with pid=9
Tue Dec 12 15:09:46 2006 -
Managing Undo tablespace & roll back segments
Hi,
I have oracle 9.1 version and have created 5g undo tablespace apart from 20m rbs tablespace for 15 rollback segments. But it is seen that whenever i give UNDO_MANAGEMENT=AUTO then rollback segments are created using undo tablespace and not allowing rollback segment in rbs tablespace ONLINE. In the reverse happens whenever I give UNDO_MANAGEMENT=MANUAL , the rollback segments in the rbs tablespace gets focus and roll back segments in the Undo tablespace goes offline. Is there anything that I can do so that both undo tablespace and redo segments in the rbs tablespace gets working together so as to minimize the undo contention. Moreover, any query given takes long time when select query given with || in the subquery.
Please suggest the tuning need to do?brain_heart wrote:
Hi,
I have oracle 9.1 version and have created 5g undo tablespace apart from 20m rbs tablespace for 15 rollback segments. But it is seen that whenever i give UNDO_MANAGEMENT=AUTO then rollback segments are created using undo tablespace and not allowing rollback segment in rbs tablespace ONLINE. In the reverse happens whenever I give UNDO_MANAGEMENT=MANUAL , the rollback segments in the rbs tablespace gets focus and roll back segments in the Undo tablespace goes offline. Is there anything that I can do so that both undo tablespace and redo segments in the rbs tablespace gets working together so as to minimize the undo contention.No that's the way it would work, you can either use the automatic undo or the manual one.not both. And its better to stick with the automatic one IMHO. Have a read of this link to understand more about undo.
http://download.oracle.com/docs/cd/B10501_01/server.920/a96521/undo.htm#8888
HTH
Aman.... -
To change manul to auto undo management in 9i
Hi
My production database on manul undo management means (RBS) . I want to change this on auto mode Please Help me what steps i follow to do this
DB 9.2 and OS AIX 5.2
ThanksSQL> alter system set undo_management=manual scope=spfile;
System altered.
SQL> shutdown immediate;
SQL> startup
SQL> show parameter undo
NAME TYPE VALUE
undo_management string MANUAL
undo_retention integer 1800
undo_tablespace string UNDONEW
SQL>
do this same for auto....
regards -
Hello Experts,
I am getting the following error while try to start database. In the respective directory I am not able to find initorrcl.ora file.
Please help. Its urgent fro my project/job.
Error:
startup nomount
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file \APP\US31998\PRODUCT\11.1.0\DB_1\DATABASE\INITORCL.ORA'The init.ora file actullay located in the *\app\US31998\product\11.1.0\db_1\srvm\admin* directory.
I copied the same file and putting into the *\app\US31998\product\11.1.0\db_1\database* directory
After I copied its saying the following errer while runnning the startup nomount command
startup nomount
ORA-01078: failure in processing system parameters
ORA-00439: feature not enabled: Real Application Clusters
-----------------------------------init.ora file---------------------------------------------------------------------------------------
# $Header: init.ora 25-jul-01.18:03:38 rajayar Exp $
# Copyright (c) 1991, 2001, Oracle Corporation. All rights reserved. */
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, use the
# same file for all instance. Place all instance-specific parameters
# at the end of the file using the <sid>.<parameter_name> = <value> syntax.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback segments,
# these must be specified differently for each instance, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own.
# replace "clustdb" with your database name
db_name = clustdb
compatible=9.0.0
db_files = 1024 # INITIAL
#INITIAL
#db_files=80
#SMALL
#DB_files=400
#MEDIUM
#db_files=1000
#LARGE
control_files = ("\\.\clustdb_control1", "\\.\clustdb_control2")
db_file_multiblock_read_count = 8 # INITIAL
# db_file_multiblock_read_count = 8
#SMALL
#db_file_multiblock_read_count = 16
#MEDIUM
#db_file_multiblock_read_count = 32
#LARGE
#Datawarehouse
db_block_size=8192
# Transaction processing
# db_block_size=4096
open_cursors=300
#Transaction processing
#sort_area_size=524288
#Datawarehouse
sort_area_size=1048576
large_pool_size=1048576 #Transaction processing, Datawarehouse
db_cache_size=50331648 #Datawarehouse, Transaction processing
java_pool_size=67108864 #Datawarehouse, Transaction processing
# db_block_buffers = 200 # INITIAL
# db_block_buffers=100 #SMALL
# db_block_buffers =550 # MEDIUM
# db_block_buffers=3200 #LARGE
#shared_pool_size = 52428800 # INITIAL
shared_pool_size = 67108864 # datewarehouse, transaction processing
log_checkpoint_interval = 10000
processes = 59 # INITIAL
# processes = 50
#SMALL
#processes = 100
#MEDIUM
#processes = 200
#LARGE
parallel_max_servers = 5
#SMALL
# parallel_max_servers = 4 x (number of CPUs)
#MEDIUM
# parallel_max_servers = 4 x (number of CPUs)
# LARGE
log_buffer = 8192 # INITIAL
#log_buffer = 8192
#SMALL
#log_buffer = 32768
#MEDIUM
#log_buffer = 163840
#LARGE
# audit_trail = true # if you want auditing
# timed_statistics = true # if you want timed statistics
max_dump_file_size = 10240 # limit trace file size to 10 K each
# Uncommenting the line below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest = %ORACLE_HOME%/admin/clustdb/arch
# log_archive_format = "%%ORACLE_SID%%T%TS%S.ARC"
# If using private rollback segments, place lines of the following
# form at the end of this file:
# <sid>.rollback_segments = (name1, name2)
# If using public rollback segments, define how many
# rollback segments each instance will pick up, using the formula
# # of rollback segments = transactions / transactions_per_rollback_segment
# In this example each instance will grab 40/10 = 4:
# transactions = 40
# transactions_per_rollback_segment = 10
# Global Naming -- enforce that a dblink has same name as the db it connects to
global_names = TRUE
# Edit and uncomment the following line to provide the suffix that will be
# appended to the db_name parameter (separated with a dot) and stored as the
# global database name when a database is created. If your site uses
# Internet Domain names for e-mail, then the part of your e-mail address after
# the '@' is a good candidate for this parameter value.
# db_domain = us.acme.com # global database name is db_name.db_domain
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = TRUE
# define directories to store trace and alert files
background_dump_dest=%ORACLE_HOME%/admin/clustdb/bdump
user_dump_dest=%ORACLE_HOME%/admin/clustdb/
db_block_size = 4096
remote_login_passwordfile = exclusive
# text_enable = TRUE
# The following parameters are needed for the Advanced Replication Option
job_queue_processes = 2
# job_queue_processes = 4 #datawarehouse
# job_queue_interval = 10
# job_queue_keep_connections = false
distributed_transactions = 5
open_links = 4
# The following parameters are instance-specific parameters that are
# specified for two instances named clustdb1 and clustdb2
undo_management=AUTO # For automatic undo management
# = MANUAL For manual/RBS undo management
cluster_database= true
cluster_database_instances=2
remote_listener=LISTENERS_CLUSTDB
# First instance specific parameters
clustdb1.thread=1
clustdb1.instance_name=clustdb1
clustdb1.instance_number=1
clustdb1.local_listener=listener_clustdb1
clustdb1.remote_login_passwordfile = exclusive
# Comment out clustdb1.undo_tablespace and uncomment clustdb1.rollback_segments
# when undo_management=MANUAL
clustdb1.undo_tablespace = UNDOTBS1
# clustdb1.rollback_segments = (rbs1_1,rbs1_2)
# Second instance specific parameters
clustdb2.thread=2
clustdb2.instance_name = clustdb2
clustdb2.instance_number = 2
clustdb2.local_listener = listener_clustdb2
clustdb2.remote_login_passwordfile = exclusive
# Comment out clustdb2.undo_tablespace and uncomment clustdb2.rollback_segments
# when undo_management=MANUAL
clustdb2.undo_tablespace = UNDOTBS2
# clustdb2.rollback_segments = (rbs2_1,rbs2_2)
-----------------------------------init.ora file--------------------------------------------------------------------------------------- -
Recovery lost undo tablespace and Redo log
Recovery undo tablespace
[email protected]> shutdown
Database closed.
Database dismounted.
ORACLE instance shut down.e
[email protected]> exit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
[ora920@tkyte-pc-isdn ora920]$ ls
control01.ctl cwmlite01.dbf indx01.dbf redo02.log redo0B.log temp01.dbf
users01.dbf
control02.ctl drsys01.dbf odm01.dbf redo03.log redo0C.log tools01.dbf
xdb01.dbf
control03.ctl example01.dbf redo01.log redo0A.log system01.dbf undotbs01.dbf
[ora920@tkyte-pc-isdn ora920]$ mv undotbs01.dbf undotbs01.dbf.xxx
[ora920@tkyte-pc-isdn ora920]$ sqlplus /nolog
SQL*Plus: Release 9.2.0.1.0 - Production on Sat Sep 28 08:33:29 2002
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
idle> connect / as sysdba
Connected to an idle instance.
idle> startup
ORACLE instance started.
Total System Global Area 143725064 bytes
Fixed Size 451080 bytes
Variable Size 109051904 bytes
Database Buffers 33554432 bytes
Redo Buffers 667648 bytes
Database mounted.
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: '/usr/oracle/ora920/OraHome1/oradata/ora920/undotbs01.dbf'
idle> show parameter undo
NAME TYPE VALUE
undo_management string AUTO
undo_retention integer 10800
undo_suppress_errors boolean FALSE
undo_tablespace string UNDOTBS1
idle> alter system set undo_management = manual scope=spfile;
System altered.
Note: disabling the undo tablespace here, this'll let us go back to "rollback segments"
and we'll use the system RBS to get back on our feet
idle> shutdown
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
idle> exit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
[ora920@tkyte-pc-isdn ora920]$ !sql
sqlplus /nolog
SQL*Plus: Release 9.2.0.1.0 - Production on Sat Sep 28 08:35:34 2002
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
idle> connect / as sysdba;
Connected to an idle instance.
idle> startup
ORACLE instance started.
Total System Global Area 143725064 bytes
Fixed Size 451080 bytes
Variable Size 109051904 bytes
Database Buffers 33554432 bytes
Redo Buffers 667648 bytes
Database mounted.
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: '/usr/oracle/ora920/OraHome1/oradata/ora920/undotbs01.dbf'
Note: we still have to get rid of that thing..
idle> alter database datafile '/usr/oracle/ora920/OraHome1/oradata/ora920/undotbs01.dbf'
2 offline drop;
Database altered.
idle> alter database open;
Database altered.
idle> drop tablespace undotbs1;
Tablespace dropped.
idle> create UNDO tablespace undotbs1
2 datafile '/usr/oracle/ora920/OraHome1/oradata/ora920/undotbs01.dbf' size 25m
3 autoextend on next 1m maxsize 1024m;
Tablespace created.
idle> alter system set undo_management = auto scope=spfile;
System altered.
Now, we've put the undo tablespace "back" by creating a new one. Just bounce...
idle> shutdown
Database closed.
Database dismounted.
ORACLE instance shut down.
idle> exit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
[ora920@tkyte-pc-isdn ora920]$ !sql
sqlplus /nolog
SQL*Plus: Release 9.2.0.1.0 - Production on Sat Sep 28 08:40:51 2002
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
idle> connect / as sysdba;
Connected to an idle instance.
idle> startup
ORACLE instance started.
Total System Global Area 143725064 bytes
Fixed Size 451080 bytes
Variable Size 109051904 bytes
Database Buffers 33554432 bytes
Redo Buffers 667648 bytes
Database mounted.
Database opened.
idle> show parameter undo
NAME TYPE VALUE
undo_management string AUTO
undo_retention integer 10800
undo_suppress_errors boolean FALSE
undo_tablespace string UNDOTBS1
idle>
and we are right back where we started from
RECOVERY REDO TABLESPACE
STARTUP MOUNT;
RESTORE DATABASE;
RECOVER DATABASE UNTIL SEQUENCE $v_seq THREAD 1;
ALTER DATABASE OPEN RESETLOGS;[email protected] wrote:
just ignore first one like title
Alter database open resetlog is not necessary to open database ?
Regards
kmphttp://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/osrecov.htm#i1007426
About Opening with the RESETLOGS Option
The RESETLOGS option is always required after incomplete media recovery or recovery using a backup control file.
You did not do an incomplete media recovery nor a recovery using a backup control file. -
HI There
I have recently configure Data guard with Database 10g (10.2.0.4-64 bits) on Windows 2007 server.
My Data Gurad Configuration show Success status with 2 databases on same (or local) location.
My questions are
1-When I query SHOW PARAMETER LOG ARCH
DG_CONFIG(PRMDB)
ONLY 1 (PRIMARY DATABASE IS DISPLAYED ONLY NOT 2 DTATABASES
e.g. DG_CONFIG(PRMDB, STLDB)
2- How to check the log applied interval or time (either transaction by transaction, timing etc)
Kind Regards
Thunder2777THANKS FOR REPLY
BOTH TNSNAMES.ORA AND LISTENER.ORA IN SAME DIRECTORY
C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN
TNSNAMES.ORA
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
PRMDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CV-SERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = PRMDB)
STLDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CV-SERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = STLDB)
LISTENER.ORA
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = STLDB)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
# PRIMARY DATABASE SPFILE
SPFILEPRMDB.ORA
prmdb.__db_cache_size=922746880
prmdb.__java_pool_size=16777216
prmdb.__large_pool_size=16777216
prmdb.__shared_pool_size=285212672
prmdb.__streams_pool_size=0
*.archive_lag_target=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\PRMDB\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\PRMDB\bdump'
*.compatible='10.2.0.3.0'
*.control_files='C:\oracle\product\10.2.0\oradata\PRMDB\control01.ctl','C:\oracle\product\10.2.0\oradata\PRMDB\control02.ctl','C:\oracle\product\10.2.0\oradata\PRMDB\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\PRMDB\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='PRMDB'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dg_broker_start=TRUE
*.dispatchers='(PROTOCOL=TCP) (SERVICE=PRMDBXDB)'
*.job_queue_processes=10
*.log_archive_config='dg_config=(stldb)'
*.log_archive_dest_1='service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=CV-SERVER)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=stldb_XPT)(INSTANCE_NAME=stldb)(SERVER=dedicated)))"',' LGWR ASYNC NOAFFIRM delay=0 OPTIONAL max_failure=0 max_connections=1 reopen=300 db_unique_name="stldb" register net_timeout=180 valid_for=(online_logfile,primary_role)'
*.log_archive_dest_state_1='ENABLE'
prmdb.log_archive_format='ARC%S_%R.%T'
*.log_archive_max_processes=2
*.log_archive_min_succeed_dest=1
prmdb.log_archive_trace=0
*.open_cursors=300
*.pga_aggregate_target=417333248
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=1253048320
prmdb.standby_archive_dest=''
*.standby_file_management='MANUAL'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\PRMDB\udump'
# STANDBY DATABASE INITSTLDB
INITSTLDB.ORA
STLDB.__db_cache_size=922746880
STLDB.__java_pool_size=16777216
STLDB.__large_pool_size=16777216
STLDB.__shared_pool_size=285212672
STLDB.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\STLDB\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\STLDB\bdump'
*.compatible='10.2.0.3.0'
*.control_files='D:\ORACLE\ORADATA\STLDB\CONTROLFILE\control01.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\STLDB\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='PRMDB'
*.db_unique_name='STLDB'
*.db_recovery_file_dest='D:\oracle\FRA'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=STLDBXDB)'
*.LOG_ARCHIVE_DEST_1='LOCATION=USE_DB_RECOVERY_FILE_DEST
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=STLDB'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.job_queue_processes=10
*.open_cursors=300
*.pga_aggregate_target=417333248
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=1253048320
*.undo_management='MANUAL'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\STLDB\udump'
THANKS -
I'm attempting to make a 9i database from scratch running within 10g, has anyone ever tried this before. I played with the compatibility mode however the database creation wizard always gives me the error "must be 10.0 or above". Any hints.
Thanks in advance...I take it you are trying to create a 9i-compatible database with a 10g software installation.
Nothing like making life difficult for yourself, is there?!
Anyway, it's perfectly do-able. You just have to be aware that the SYSAUX tablespace is a 10g invention, as is the Flash Recovery Area and the Enterprise Manager DB Console. So, you'd better be prepared to unselect all those things (which means doing a custom database creation in DBCA), because if you ask for any of them to be included, then it will certainly demand that the compatible parameter be set to 10.0.0.0+
A simpler alternative might be as follows.
Create a text file init.ora in ORACLE_HOME/dbs or ORACLE_HOME\database depending on your OS, containing the following parameters:
control_files=c:\control01.ctl
db_block_size=8192
compatible=9.2.0.1
undo_management=manual
shared_pool_size=64M
db_cache_size=64M
db_name=test9
db_create_file_dest=c:\Obviously, you adjust paths and sizes to suit. I called mine INITTEST9.ORA. You need to call it INITXXXX.ora, where XXXX is what you want your eventual database name to be.
Next, create a password file:
orapwd file=C:\oracle\product\10.2.0\db_1\database\pwdtest9.ora entries=5 password=pwordAgain, that's for Windows (it really helps to know your OS when you ask for help, you know!) and if you're not using Windows, you'll have to adjust paths and file names to suit. The thing needs to be created in ORACLE_HOME/dbs with a default name of orapwXXXX.ora, where XXXX is your ORACLE_SID (in my case, test9)
If you're Windows, you'll also need a service:
oradim -NEW -SID test9 -STARTMODE autoSkip that bit completely if you're not on Windows
Now you simply do:
set ORACLE_SID=TEST9 (on Linux, export ORACLE_SID=test9)
sqlplus sys/pword as sysdba
startup nomount
create database;And at that point, you have a very basic 9i database created with 10g software (so anyone saying it can't be done needs to re-consider!)
You'll need to add temporary tablespace and undo tablespace, but those are just details. The main point is to get a prior-compatible, fully-functioning database. -
Undo tablespace currupt and no clean backup
Hello,
We are facing critical problem with database. We have not any clean backup and database in no archive log mode. Suddenly database is shutdown and when we are trying to open database it is giving error:-
ORA-01172: recovery of thread 1 stuck at block 350230 of file 3
ORA-01151: use media recovery to recover block, restore backup if needed
File 3 is Undo file.
Is there any way to open database?
Thanks in advance and please reply us ASAP.1) First, follow Howardjr recomendations and allways do a backup first.
2) Open a SR with Metalink to help with your problem
3) If you want to try something here are some options, but never skip the point 1 previously explained.
Well, you have two possible scenarios, one supported other unsupported.
This is an inconsistency issue..
Solution
============
*1]Supported Solution:*
Restore-Incomplete recovery the DB from backup or rebuild the DB using an export dump.
*2]Internal (Not-supported) Solution:*
Update undo$ to change the status$ = 1 (undo segment is dropped) for the corrupted undo segment.
Caution:
This is NOT a supported solution. Therefore ensure that a full database cold backup is taken bbefore doing this data-dictionary patching.
Steps to do the patching:
1) First ensure that a full database backup is taken.
2) Modify/add the following parameters in initSID.ora:
undo_management=manual
job_queue_processes =0
aq_tm_processes=0
systemtrig_enabled=false
3) Shutdown
4) Startup restrict pfile
5) set transaction use rollback segment system;
if set transaction above fails, then not to proceed further.
6) Update undo$ to change the status$ = 1 (undo segment is dropped) for
the corrupt undo segment.
update undo$ set status$ = 1
where us# = <'undo segment id'>
and ts#=<'tablespace id'>
and file#=<'file id'>
and block# = <'block id'>
and status$=2;
or
update undo$ set status$ = 1
where name = <'corrupt undo segment name'>
and status$=2;
This will update only 1 row. Rollback the update if more than 1 row is updated.
7) Commit;
8) Shutdown abort
9) Set back in init.ora parameters modified in Step 2.
Startup restrict
10) Drop the corrupt undo tablespace using command:
drop tablespace <corrupt undo tablespace name> including contents;
11) Create new undo tablespace.
In initSID.ora, set undo_management=auto, undo_tablespace=<'new undo tablespace name'>
Restart the instance.
12) Take a backup.
*Parameter offlinerollback_segments is not useful:*
Trying to drop the corrupt undo segment or the undo tablespace by setting parameters undo management=manual and offline_rollback_segments in initSID.ora will fails with error: ORA-00600 [ktssdrp1].
To see the information about the corrupt block use this query:
select us#, name, ts#, file#, block#,status$ from undo$
where (ts#, file#, block#) not in
(select ts#, file#, block# from seg$ where type# in (1,10)) and status$ > 1;I had the same problem some time ago, and the unsupported solution works great, but never try it without a full backup first.
Cheers,
Francisco Munoz Alvarez
http://oraclenz.wordpress.com
Edited by: F.Munoz Alvarez on Nov 30, 2012 11:03 AM
Maybe you are looking for
-
Hi there! i have a big problem, i bought a software cd(windows software) it require cd to be inserted for running the software. so i thought to copy the data rom it but i am able to copy only 100b of data out of 750 MB, the permission is READ ONLY.
-
What may cause Errors.log to be generated from Essentials configuration wizard?
I customized install.wim to handle specific drivers, and while the OS installs properly... during the Essentials Configuration Wizard, the process nearly immediately stops at 0% and generates this file "Errors.log" with the contents: FATAL: SetFolder
-
I wanna reinstall Mac OSx lion on MacBook pro, my problem is I dint purchase OSx lion with my apple Id before.so anybody can tell me how to purchase OSx with my apple Id on MacBook
-
I need to duplicate my ORacle 10.2.0.3 DB for testing my upgrade to 11g. It seems i installed a different patch level than my production DB. I installed 10.2.0.4 on my auxillary instance and my production is 10.2.0.3. Will this cause problems or do b
-
After updating firefox will not launch
Ever since version 8 became available whenever I update FF it will not launch. No error messages or anything, just no response at all from the button. I have cleared the cache and cookies, completely removed FF using the control panel - add remove pr