Read IDOC content in abap program

Hi all
using IDOC number, i'd like to read informations containted in that IDOC.
In EDI_* Function moduls i have found EDI_DOCUMENT_OPEN_FOR_EDIT
The problem is that this FM is used to process IDOC to change its content. i supose that the IDOC is enqued when processed by this FM.
Do you know any other way to access IDOC data content in READ mode
Thank you in advance
Regards

Hi,
You can use the following FM.
IDOC_READ_COMPLETELY (Read IDoc Data)
IDOC_TYPE_COMPLETE_READ (Read IDoc Structure and Segments)
or
read the idoc data from database table edid4 and edids (idoc status))and edidc (idoc control data).
Regards,
S.Velsankar

Similar Messages

How to read an IDoc with an ABAP program?

Hi experts!
I am new to SAP and I need to read an IDoc with an ABAP program... how to do it?
Maybe it is possible to read an IDoc into inner table...?
Hellpful answers and advices will be rawarded.
Regards,
Mindaugas.

hi
I understand your issue, to pickup an IDOC flat file & post it to R/3 (with or without mapping).
There is no straight forward solution but there are some ways (Normal way of Working as of now ?!!!) provided in the "How to"
check this link
https://websmp101.sap-ag.de/nw-howtoguides
and look for this guide
How To Convert Between IDoc XML and Flat Files in XI.30
Probably you need to automate this using some programs,
- Create an ALE port of type File
using transaction WE21 on your
Integration Engine.
- Run report RSEINB00 on your
Integration Engine. The report will
upload the file, filter the IDoc header
data, perform the conversion to IDoc
XML and put the data into the
pipeline of the Integration Server.
Therefore it is crucial, that the IDoc
control record data is populated
correctly and corresponds to the
adapter-specific identifiers of your
sender service. Once the message
is put successfully into the pipeline
of the Integration Server, the file is
deleted.
Hope this fixes your issue
regards
ravish
plz dont forget to reward points if helpful

How to create Inbound Idocs in a ABAP program? Any function Module?

Hello Experts,
My requirement is : I have sales order data which I extracted from third party system in my internal tables. In the same box I need to create inbound Idocs and then consequently create sales orders.
I have used the function module IDOC_INBOUND_WRITE_TO_DB to create inbound Idocs from Sales Orders data in internal tables. I have populated all the data records with correct PSGNUM and HLEVEL values. My plan is to create inbound idocs with this function module and send those to IDOC_INPUT_ORDERS function module which creates Sales Orders.
If a sales order in the internal table in ABAP program contains only one item, then I am getting correct idocs. But if more than one item exists for a sales order then the line item segments which got repeated in Idoc are having PSGNUM and HLEVEL values as zero when I checked in WE02. As a result the hierarchy from the second item segment is getting disturbed and getting the status 60.
I populated T_EDIDD with data records from IDOC_INBOUND_WRITE_TO_DB.
To the function module IDOC_INPUT_ORDERS, T_EDIDC and T_EDIDD are the input. I observed that in T_EDIDD also the PSGNUM and HLEVEL values are blank.
I am getting Status 60 with message 'EDI: Syntax error in IDoc (segment cannot be identified)' for idocs which have more than one item.
I need to extract sales data from third party and create inbound idocs and create sales orders in one ABAP program only. I need to display corresponding Idoc numbers for the corresponding third party sales order number in a listoutput.
Can anybody please provide inputs?
Regards.

Hi Anjali,
Thanks for the response.
I have passed the PSGNUM and HLEVEL values while populating the data records. Then I sent the data records and control record information to the function module IDOC_INBOUND_WRITE_TO_DB. Inside this function module there is code to clear the PSGNUM values and HLEVEL values.
for compatibility: clear administration data of data records
           perform data_records_wipe
                                  tables
                                      t_data_records.
FORM DATA_RECORDS_WIPE
                  TABLES
                      T_DATA_RECORDS_IN STRUCTURE EDIDD.
LOOP AT T_DATA_RECORDS_IN.
    CLEAR: T_DATA_RECORDS_IN-MANDT,
           T_DATA_RECORDS_IN-DOCNUM,
           T_DATA_RECORDS_IN-SEGNUM,
           T_DATA_RECORDS_IN-PSGNUM,
           T_DATA_RECORDS_IN-HLEVEL.
    modify t_data_records_in.
ENDLOOP.
ENDFORM.                               " DATA_RECORDS_WIPE
This is the code which is clearing all the PSGNUM and HLEVEL values. After coming out of this function module we are getting the error idocs created with disturbed hierarchy.
I need to create INBOUND Idocs with the data in ABAP program.
Please let me know if any inputs? Is there any function module existing to create Inbound Idocs inside an ABAP program?
Regards

How to generate an OUTBOUND INVOICE IDOC from the ABAP Program?

How to generate an OUTBOUND INVOICE IDOC from the ABAP Program? Any Function Module that can be used for this?

Hi
This is more of configuration
(1) Create a Output type with Medium 6 ( Check with your functional consultant)
(2) Maintain Partner Profiles using WE20 transaction
       Idoc type - INVOIC02
       Message type - INVOIC
       Process Code - SD09
Regards
Madhan D

Sending IDOC form the ABAP Program

hi friends,
can we send IDOC ( of type MATMAS) form ABAP Program. if it possible how can we send, are there any function modules to do so....could any one tell me the procedure to accomplish the task...i have finished the configuration sting in both reciver and sender systems....just need to send material in form of IDOC from abap program.
( Note: not form BD10).
Thanks in advance,
Santosh.

Function MG_IDOC_CREATE_FULL_MAT
( to send the material in full) or
MASTERIDOC_CREATE_REQ_MATMAS (based on idoc reduction)
Just pass
1 ) receiving system: fields rcvprn /
rcvprt. If you leave these 2 fields blank, then it will determine the receiving system(s) via the distribution model.
2 ) marakey = list of material numbers you want to send
3 ) message type.
example :
CALL FUNCTION 'MG_IDOC_CREATE_FULL_MAT'
EXPORTING
rcvpfc = ' '
rcvprn = receiver_prn
rcvprt = receiver_prt
sndpfc = ' '
sndprn = ' '
sndprt = ' '
message_type = mestyp
TABLES
marakey = t_matkeypack
EXCEPTIONS
OTHERS = 0.

IDOC generation from ABAP program

Hi
I have to object in which I have to Z program which will generate the idoc and pass it to PI system. Can anyone guide me in how to generate IDOC through ABAP custom program. Just need a little guidance in how to create IDOC from an ABAP report.
Any help would be greatly acknowledged.
Thanks!!

Hi I tried to use the program as suggested by Buddhika and Glen, but found error over the statement below:
i_data-sdata = header_segment_data.
Highlighted below in code snap. These two fields are not mutually convertible.
Any suggestions on this.

Reading Webservice information from ABAP Program

Hi All,
How to read a webservice information from a ABAP program ?
Are there any webservices available in ABAP which can do this .
Gopal.

Hi,
The following code will call the web service and fill the data into internal table which was received from the Web service. This code will send & Receive the data from ABAP to Webservice.
Change the Header detail as per your Webservice.
REPORT ZWORKORDER.
TYPES: BEGIN OF OUTTAB1 ,
JOBCODE(20),
COMPONENTCODE(20),
ACCURATEHOURS(20),
ACCURATECOST(20),
LENGTH TYPE I,
 END OF OUTTAB1 .
DATA: OUTTAB TYPE TABLE OF OUTTAB1.
DATA: TAB TYPE OUTTAB1.
DATA: WF_O LIKE LINE OF OUTTAB .
DATA: XSLT_ERR TYPE REF TO CX_XSLT_EXCEPTION .
DATA: RLENGTH TYPE I,
 TXLEN TYPE STRING .
DATA: HTTP_CLIENT TYPE REF TO IF_HTTP_CLIENT .
DATA: WF_STRING TYPE STRING .
DATA: WF_STRING1 TYPE STRING .
DATA: WF_PROXY TYPE STRING ,
 WF_PORT TYPE STRING .
CLEAR WF_STRING .
Form the input string to send the Input Data to Web service.
CONCATENATE
'<?xml version="1.0" encoding="utf-8"?>'
'<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">'
' <soap:Body>'
' <GetWorkOrder xmlns="http://*******erica.net/webservices/">'
' <nWorkOrder>2</nWorkOrder>'
' <nDistributorCode>4871</nDistributorCode>'
' <model>HM400</model>'
' <type>1 </type>'
' </GetWorkOrder>'
' </soap:Body>'
'</soap:Envelope>'
INTO WF_STRING .
CLEAR :RLENGTH , TXLEN .
RLENGTH = STRLEN( WF_STRING ) .
MOVE: RLENGTH TO TXLEN .
CLEAR: WF_PROXY, WF_PORT .
CALL METHOD CL_HTTP_CLIENT=>CREATE
EXPORTING
 HOST = '192.168.1.41' "'http://****merica.net/webservices'
 SERVICE = '8080'
 SCHEME = '1'
IMPORTING
 CLIENT = HTTP_CLIENT.
HTTP_CLIENT->PROPERTYTYPE_LOGON_POPUP = HTTP_CLIENT->CO_DISABLED.
CALL METHOD HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
EXPORTING
 NAME = '~request_method'
 VALUE = 'POST'.
CALL METHOD HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
EXPORTING
 NAME = '~server_protocol'
 VALUE = 'HTTP/1.1'.
CALL METHOD HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
EXPORTING
 NAME = '~request_uri'
 VALUE = '/service/accurate/workorder.asmx?'.
CALL METHOD HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
EXPORTING
 NAME = 'Content-Type'
 VALUE = 'text/xml; charset=utf-8'.
CALL METHOD HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
EXPORTING
 NAME = 'Content-Length'
 VALUE = TXLEN.
CALL METHOD HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
EXPORTING
 NAME = 'SOAPAction'
 VALUE = 'http://********merica.net/webservices/GetWorkOrder'.
CALL METHOD HTTP_CLIENT->REQUEST->SET_CDATA
EXPORTING
 DATA = WF_STRING
 OFFSET = 0
 LENGTH = RLENGTH.
Send the Input Data to Web service.
CALL METHOD HTTP_CLIENT->SEND
EXCEPTIONS
 HTTP_COMMUNICATION_FAILURE = 1
 HTTP_INVALID_STATE = 2.
Receive the Input from Web Serice.
CALL METHOD HTTP_CLIENT->RECEIVE
EXCEPTIONS
 HTTP_COMMUNICATION_FAILURE = 1
 HTTP_INVALID_STATE = 2
 HTTP_PROCESSING_FAILED = 3.
CLEAR WF_STRING1 .
WF_STRING1 = HTTP_CLIENT->RESPONSE->GET_CDATA( ).
DATA: LENGTH TYPE I.
LENGTH = STRLEN( WF_STRING1 ).
DATA: VALUE_FIELD TYPE NAME_KOMP.
DATA: VALUE TYPE REF TO DATA.
FIELD-SYMBOLS: <FS_CONVERTED_DATA>.
DATA: TAB1 TYPE TABLE OF STRING.
DATA: FROM_LENGTH TYPE I VALUE 1.
DATA: TO_LENGTH TYPE I.
DATA: DIFF TYPE I.
DATA: START TYPE I VALUE 1.
DO.
JOBCODE.
SEARCH WF_STRING1 FOR 'JobCode=' . "STARTING AT START .
IF SY-SUBRC <> 0.
 EXIT.
ENDIF.
FROM_LENGTH = SY-FDPOS .
FROM_LENGTH = FROM_LENGTH + 8.
SEARCH WF_STRING1 FOR 'JobDescription=' ."STARTING AT START ..
TO_LENGTH = SY-FDPOS .
DIFF = TO_LENGTH - FROM_LENGTH .
MOVE WF_STRING1+FROM_LENGTH(DIFF) TO TAB-JOBCODE.
TO_LENGTH = DIFF + TO_LENGTH.
SHIFT WF_STRING1 BY TO_LENGTH PLACES.
COMPONENT CODE
SEARCH WF_STRING1 FOR 'ComponentCode=' .
IF SY-SUBRC <> 0.
 EXIT.
ENDIF.
FROM_LENGTH = SY-FDPOS .
FROM_LENGTH = FROM_LENGTH + 14.
SEARCH WF_STRING1 FOR 'ComponentDescription=' .
TO_LENGTH = SY-FDPOS .
DIFF = TO_LENGTH - FROM_LENGTH .
MOVE WF_STRING1+FROM_LENGTH(DIFF) TO TAB-COMPONENTCODE.
TO_LENGTH = DIFF + TO_LENGTH.
SHIFT WF_STRING1 BY TO_LENGTH PLACES.
AccurateHours
SEARCH WF_STRING1 FOR 'AccurateHours=' .
IF SY-SUBRC <> 0.
 EXIT.
ENDIF.
FROM_LENGTH = SY-FDPOS .
FROM_LENGTH = FROM_LENGTH + 14.
SEARCH WF_STRING1 FOR 'AccurateCost='.
TO_LENGTH = SY-FDPOS .
DIFF = TO_LENGTH - FROM_LENGTH .
MOVE WF_STRING1+FROM_LENGTH(DIFF) TO TAB-ACCURATEHOURS.
TO_LENGTH = DIFF + TO_LENGTH.
AccurateCost
SEARCH WF_STRING1 FOR 'AccurateCost='.
FROM_LENGTH = SY-FDPOS.
FROM_LENGTH = FROM_LENGTH + 13.
SEARCH WF_STRING1 FOR '/>'.
TO_LENGTH = SY-FDPOS.
DIFF = TO_LENGTH - FROM_LENGTH .
MOVE WF_STRING1+FROM_LENGTH(DIFF) TO TAB-ACCURATECOST.
TO_LENGTH = DIFF + TO_LENGTH.
SHIFT WF_STRING1 BY TO_LENGTH PLACES.
APPEND TAB TO OUTTAB.
ENDDO.
WRITE: (10) 'JOBCODE'.
WRITE (20) 'COMPONENTCODE'.
WRITE (30) 'ACCURATEHOURS'.
WRITE (40) 'ACCURATECOST'.
LOOP AT OUTTAB INTO TAB.
WRITE:/ TAB-JOBCODE .
WRITE (20) TAB-COMPONENTCODE.
WRITE (30) TAB-ACCURATEHOURS.
WRITE (40) TAB-ACCURATECOST.
ENDLOOP .
It is better to create a proxy, it then puts a level of abstraction between in that coding. All you need to do is then access the proxy class.
Besides that i think you can do it by configuring the ITS and calling the webservice by means of using BSP applications in ABAP
I believe you need to create a proxy in order to consume your web service.
http://help.sap.com/saphelp_nw2004s/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/frameset.htm
Reward points
Regards

SAPIDocReceiver - read idoc content

Hi,
I'm writing a dot net application receive IDOCS from SAP using .net connector class SAP.Connector.SAPIDocReceiver.
Can anybody tell me the easiest way to access IDOC content from received text stream.
Also please let me know if there's a alternative to receive IDOC into a .NET application.
Thanks,
Sameera Perera.

Hi Sameera,
Read this blog and it would help- /people/sap.user72/blog/2004/12/31/some-tips-on-developing-idoc-receiver-programs-with-net-connector
And also NCo provides you with a sample application in the samples directory.
Regards.

Reading WebDAV Content from ABAP

Hello,
I like to read WebDAV Content from SAP NetWeaver Portal KM with ABAP.
For writing Content with WebDAV I found this post:
A small working example of how to use the Abap webdav client to write files
With Method GET_CONTENT from CL_SWDCL_NAMESPACE_CLIENT I can read single files, but what I need is a list with files and folders for a given path.
I also tried to use the Interface IF_SWDCL_BASIC_SEARCH_CLIENT, but I only get HTML-Errorcodes 400 or 422 since I don't know which parameters I need.
Maybe there is someone here who can help me to solve this problem.
Thank you.

Hello,
I face the same problem, did you already find a solution you can share?
Thanks in advance
Stefan

Reading XML Data from ABAP Program?

Hi,
How do I read XML Data from an ABAP Program? For example if I have the below basic XML Code-
<xml>
<Name> Thiru </Name>
<Age> 24 </Age>
<City> chennai </Chennai>
</xml>
How do i read the data within the Name,Age, and City tags into variables in the ABAP Program?
Regards,
Thiru

if you decide to do in XSLT, I have a sample list here:
XML file like this:
<?xml version="1.0" encoding="UTF-16"?>
<F>
<P1>
<t_1>value1</t_1>
<t_2>testvalue</t_2>
</P1>
<P2>
</P2>
</F>
XSLT file like this:
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sapxsl="http://www.sap.com/sapxsl" version="1.0">
<xsl:strip-space elements="*"/>
<xsl:template match="F">
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<DOCUMENT>
<xsl:apply-templates/>
</DOCUMENT>
</asx:values>
</asx:abap>
</xsl:template>
<xsl:template match="P1">
<ENTRY>
<T_1><xsl:value-of select="t_1"/></T_1>
<T_2><xsl:value-of select="t_2"/></T_2>
</ENTRY>
</xsl:template>
</xsl:transform>
ABAP program like this:
DATA: BEGIN OF wa_upload,
text(255) TYPE c,
END OF wa_upload,
itab_upload LIKE TABLE OF wa_upload,
BEGIN OF wa_document,
t_1 TYPE string,
t_2 TYPE string,
END OF wa_document,
itab_document LIKE TABLE OF wa_document.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'XXXXX'
filetype = 'ASC'
TABLES
data_tab = itab_upload.
CALL TRANSFORMATION zrappel_xml_test
SOURCE XML itab_upload
RESULT document = itab_document.
You should pay attention to the bold words.
hope it will be helpful
thanks

Selective Deletion of the Cube contents in Abap Program of the PChain

Dear Experts
I need to selectively delete the contents in Basic Infocube using Process Type - ABAP Program in the Process Chain in BW 3.5
For this I have to give the Variant and Program name in the Process Type - ABAP Program in the Process Chain
The ABAP Program for this purpose can be generated automatically by the system in the the below navigation
info cube> Manage>contents > system menu(in the Top)> Status
but this abap program is changing dynamically every time and hence in the Process chain ABAP Program node is failing with error saying that that program is not available
I have tried the same way in the selective deletin navigation path also in the cube manage
Please let me know how to get the system generated program to use in the Process type-ABAP Program in Process Chain
Thanks for all in advance
KSR

Hi KSR,
Try this.. start a selective deletion on the cube. you will get a background job running. Get the job name from SM37.
Now write a ABAP program with the below code.
parameter: p_Job_Name type sysuuid_c.
CALL METHOD cl_rscrmbw_bapi=>exec_rep_in_batch
EXPORTING i_barepid = l_jobnam.
Execute the above program. Pass the job name which you got from SM37.
Create a variant with that job name.
Now schedule this newly created program. This should solve your issue.
Note : The job name might vary from one server to another (Dev / Qual / Prod). So if you are planning to move your process chain from Dev, then pass the Job name (in prod) as the variant in yr Dev system and then transport it.
Cheer,
Balaji Venugopal

How to read AL11 parameters in ABAP program

Hello SAP Masters,
I came across a requirement to read AL11 file parameters such as lastchanged day and lastchanged time of a particular file in directory. Can you guide me by providing either the function module name or any table where this information is stored, so that I can utilize something in ABAP program and get this information.
Your help is greatly appreciated!
Regards.

Keshav provided the correct response, but since you asked me - this is what AL11 does:
    PERFORM p6_to_date_time_tz(rstr0400) USING file-mtime
                                               file-mod_time
                                               file-mod_date.
BTW, that time/second value is the number of seconds since 1970.

Read DB2 tables from ABAP program

Hi All,
I have a requirement to read a DB2 table(in our landscape) from the ABAP program. I appreciate any pointers.
Thanks,
Kiran.

Connecting to an External database from SAP
Step 1: Create an entry for the External database in DBCON table using Trxn: DBCA.
Table: DBCON (Description of Database Connections)
Field Name Description Value (For: E.g.:)
CON_NAME Logical name for a database RAJ
DBMS Database system MSS
USER_NAME Database user <username>
PASSWORD Password for setting up the connection to the database <pwd>/<pwd>
CON_ENV Database-specific information for a database connection MSSQL_SERVER=depotserver MSSQL_DBNAME=HOF_INDORE
DB_RECO Availability type for an open database connect
Step 2: Now you can write code to connect to the external database
Your Sample code can be something like this
FUNCTION-POOL z_houston. "MESSAGE-ID ..
DATA: BEGIN OF wa,
c_locid(3),
c_locname(50),
c_locstate(5),
END OF wa.
FUNCTION z_houston_connect.
""Local interface:
EXEC SQL.
CONNECT TO 'RAJ' AS 'V'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'V'
ENDEXEC.
*- Get the data from MS-SQL Server
EXEC SQL.
open C1 for
select
loc_id,
loc_name,
loc_state
from ho_loc_mast
ENDEXEC.
DO.
EXEC SQL.
FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_locstate
ENDEXEC.
IF sy-subrc = 0.
PERFORM loop_output.
ELSE.
EXIT.
ENDIF.
ENDDO.
EXEC SQL.
CLOSE C1
ENDEXEC.
ENDFUNCTION.
*& Form LOOP_OUTPUT
Output
FORM loop_output .
WRITE: /5 wa-c_locid, 10 wa-c_locname, 65 wa-c_locstate.
CLEAR wa.
ENDFORM. " LOOP_OUTPUT

Read IDOC Content in MII

Hi Gurus,
My plan is to send master data to MII and process them in MII.
Is there a standard template or wizard available in MII to process the IDOC?
Thanks.
Nagarajan.

Hi Jamie,
Thank you for your reply.
I followed the exact steps which are mentioned in the link you have provided. I am able to get the IDOC in MII.
My original question is how do I read my IDOC in MII efficiently? Example: If a material master have the basic views only, then the IDOC content will be miminum. If the material has all the views, then the IDOC will contain more data corresponds to the views of the material. Standard material master changes will provide IDOC which are specific to the changes carried out in the material master.
How do I write a "common logic" to read the materials all the times?
Thanks
Nagarajan

Reading email contents from a program

Hello,
I need to read an email content from a program, to attach it to an CRM activity. Does anybody know if there is a function for this? I will have the email data (Object id, folder, type, etc) available.
Thank you!
Paola

Hi,
My Requirement is :
1)I got a requirement to read Bounce back mails in the CRM System .My present scenario is that once a campaign is executed , the mails which get bounce back are returned to outlook location.
2)The required scenario demands that, to read email IDs which get Bounce back and need to be compared with Email Ids in the Target group , which is assigned to the campaign and update the 'COunter' field which is assigned to the E-mails in the Master Data.
3)Is there any machanism to read the BOunce-Back mails in CRM System itself (or) It should be read from outlook location where the mails are returned presently, so that COUNTER which is tied up with the E-mails in Master Data can automatically updated.
4) Is there any possibility to read the Mails in the Outlook location with Mail IDs in the CRM system.
I have gone through Mr Thomas article and i think it works for my requirement but i dont know how to proceed further to read bounce back mails when a campaign is executed in CRM System.
Can any one guide me how to solve this problem .
THANKS
SURESH

Read IDOC content in abap program

Similar Messages

Maybe you are looking for