Read rtf contents from xml file and print them in pdf using documaker

I am using Documaker 11.2.
Input file is XML and for a particular tag, rtf contents is passed like
{\rtf1\ansi\ansicpg1252\deff0\deflang1033\deflangfe1033{\fonttbl{\f0\fswiss\fprq2\fcharset0 Arial Narrow;}} \viewkind4\uc1\pard\b\f0\fs20 My\b0 name is Schoo.....
I want to read this data excluding the RTF abstract and print the text alone in pdf along with format like paragraph,bold....
The output file generated is PDF.
Kindly let me know how can i achieve this in Documaker.

There is no direct support for importing RTF from an XML extract. Perhaps feature 1514 "Mapping formatted XML data into multiline field" will be of some use. This was released in 11.0, I believe.
Essentially you can establish paragraph and certain text formatting like bold and underline when you include the proper token information in the data. I believe this is similar to simple HTML tokens.
Example: <FIELD>First paragraph of data.New paragraph with bold and underline text. Rest of paragraph normal.</FIELD>
The result is something like this:
First paragraph of data.New paragraph with bold and underline text. Rest of paragraph normal.

Similar Messages

How to read the data from XML file and insert into oracle DB

Hi All,
I have below require ment.
I will receive data in the XML file. then i need to read that data and insert into oracle tables. please let me know how this can be handled.
Many Thanks.

Sounds a lot like this question, only with less details.
how to read data from XML variable and insert into table variable
We can only help if you provide us details to help as we cannot see what you are doing and only know what you tell us. Plenty of examples abound on the forums that cover the topics you seek as well.

How to read the contents of XML file from my java code

All,
I created an rtf report for one of my EBS reports. Now I want to email this report to several people. Using Tim's blog I implemented the email part. I am sending emails to myself based on the USERID logic.
However I want to email to different people other then me. My email addresses are in the XML file.
From the java program which sends the email, how can I read the fields from XML file. If any one has done this, Please point me to the right examples.
Please let me know if there are any exmaples/BLOG's which explain how to do this(basically read the contents of XML file in the Java program).
Thank You,
Padma

Ike,
Do you have a sample. I am searched so much in this forum for samples. I looked on SAX Parser. I did not find any samples.
Please help me.
Thank you for your posting.
Padma.

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

Reading data From XML file and setting into ViewObject to Pouplate ADF UI

Hi,
I have following requirement.
I would like to read data from XML file and populate the data in ViewObject so that the data can be displayed in the ADF UI.
Also when user modifies the data in the ADF UI, it should be modified back into to ViewObject.
Here is an example - XML file contains Book Title and Author. I would like to read Book Title and Author from XML file and set it into ViewObject Attribute and then display Book title and Author in ADF UI page. Also when user modifies Book title and Author, I would like to store it back in View Object.
Please help me with this requirement and let me know if any solution exist in ADF, for populating the ADF UI screen fields with external XML file data.
Thanks

Read chapter 42 http://download.oracle.com/docs/cd/E16162_01/web.1112/e16182/bcadvvo.htm of the fusion developer guide
Section 42.7, "Reading and Writing XML"
Section 42.8, "Using Programmatic View Objects for Alternative Data Sources"
Timo

How to parse contents from XML file in Java

Hi All,
I have a scenario like this . I have one xml file with key value pairs of ( name , URL ) . I have retrieved contents from XML file , now I want to parse these contents and store in a bean object.
How to parse Contents of XML file??
Thanks in advance,
Rajendra.

Hi All,
I have a scenario like this . I have one xml file with key value pairs of ( name , URL ) . I have retrieved contents from XML file , now I want to parse these contents and store in a bean object.
How to parse Contents of XML file??
Thanks in advance,
Rajendra.

How can I input read a line from a file and output it into the screen?

How can I input read a line from a file and output it into the screen?
If I have a file contains html code and I only want the URL, for example, www24.brinkster.com how can I read that into the buffer and write the output into the screen that using Java?
Any help will be appreciate!
======START FILE default.html ========
<html>
<body>
 
<center>

Welcome to a DerekTran's Website! 
Underconstructions.... 
 </center>
 
Hello, 
 
I've been using the PWS to run the website on NT workstation 4.0. It was working
fine. 
The URL should be as below: 
http://127.0.0.1/index.htm or http://localhost/index.htm
And suddently, it stops working, it can't find the connection. I tried to figure
out what's going on, but still NO CLUES. Does anyone
know what's going on? Please see the link for more.... I believe that I setup
everything correctly and the bugs still flying in the server.... 
Thank you for your help.

PeerWebServer.doc
 
CannotFindServer.doc
 
HOSTS file is not found
 
LMHOSTS file
 
How to Setup PWS on NT
 
Issdmin doc
Please be patient while the document is download....
 If you have any ideas please drop me a
few words at [email protected] 
 
 

 
</body>
</html>
========= END OF FILE ===============

Hi!
This is a possible solution to your problem.
import java.io.*;
class AddressExtractor {
 public static void main(String args[]) throws IOException{
 //retrieve the commandline parameters
 String fileName = "default.html";
 if (args.length != 0) fileName =args[0];
 else {
 System.out.println("Usage : java AddressExtractor <htmlfile>");
 System.exit(0);
 BufferedReader in = new BufferedReader(new FileReader(new File(fileName)));
 StreamTokenizer st = new StreamTokenizer(in);
 st.lowerCaseMode(true);
 st.wordChars('/','/'); //include '/' chars as part of token
 st.wordChars(':',':'); //include ':' chars as part of token
 st.quoteChar('\"'); //set the " quote char
 int i;
 while (st.ttype != StreamTokenizer.TT_EOF) {
 i = st.nextToken();
 if (st.ttype == StreamTokenizer.TT_WORD) {
 if (st.sval.equals("href")) {
 i = st.nextToken(); //the next token (assumed) is the '=' sign
 i = st.nextToken(); //then after it is the href value.
 getURL(st.sval); //retrieve address
 in.close();
 static void getURL(String s) {
 //Check string if it has http:// and truncate if it does
 if (s.indexOf("http://") > -1) {
 s = s.substring(s.indexOf("http://") + 7, s.length());
 //check if not mailto: do not print otherwise
 if (s.indexOf("mailto:") != -1) return;
 //printout anything after http:// and the next '/'
 //if no '/' then print all
 if (s.indexOf('/') > -1) {
 System.out.println(s.substring(0, s.indexOf('/')));
 } else System.out.println(s);
}Hope this helps. I used static methods instead of encapsulating everyting into a class.

Hi, extract data from xml file and insert into another exiting xml file

i am searching code to extract data from xml file and insert into another exiting xml file by a java program. I understood it is easy to extract data from a xml file, and how ever without creating another xml file. We want to insert the extracted data into another exiting xml file. Suggestions?
1st xml file which has two lines(text1.xml)
<?xml version="1.0" encoding="iso-8859-1"?>
<xs:PrintDataRequest xmlns:xs="http://com.unisys.com/Anid"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://com.unisys.com/Anid file:ANIDWS.xsd">
<xs:Person>
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://com.unisys.com/Anid file:ANIDWS.xsd">
These two lines has to be inserted in the existing another xml(text 2.xml) file(at line 3 and 4)
Regards,
bubbly

Jadz_Core wrote:
RandomAccessFile? If you know where you want to insert it.Are you sure about this? If using this, the receiving file would have to have bytes inserted that exactly match the number of bytes replaced. I'm thinking that you'll likely have to stream through the second XML with a SAX parser and copy information (or insert new information) as you stream with an XML writer of some sort.

Extract data from xml file and insert into another exiting xml fil

hello,
i am searching extract data from xml file and insert into another exiting xml file by a java program. I understood it is easy to extract data from a xml file, and how ever without creating another xml file. We want to insert the extracted data into another exiting xml file. Suggestions?
Regards,
Zhuozhi

If the files are small, you can load the target file in a DOM document, insert the data from the source file and persist the DOM.
If the files are large, you probably want to use a StAX or SAX.

Kinect Explorer WPF C# read depth data from the file and conversion to skeleton

Hello,
I am using Kinect sensor to do some research on biometrics. Since it is impossible to find people to collect some samples, I would like to use samples from the TUM - GAID database, where there exist Color View and Depth View (in .raw format) samples. Therefore,
I need to read these samples from the file and do a batch processing, instead of performing real-time collecting of samples (where I can take automatically the Skeleton view using the Kinect SDK). So, I need help on
1. Reading the data from the file (instead of activating the Kinect sensor) and give this data as an input for conversion to a skeleton
2. Read the .raw files
Thank you very much
Kind regards

Hiya,
I doubt this forum, C Sharp, will provide much help. You are asking about the Kinects system not C#
language. However, you can try this link; http://kinectforwindows.codeplex.com/
Hope this help. Thanks :)

Hello i need a help about script to export translatable text strings from ai files and import them back

Hello i need a help about script to export translatable text strings from ai files and import them back after editing, thanks in advance

Lanny -
Thank you for taking the time to help with this problem. Can I just say however that as someone who has posted a first comment here and quite clearly never used a forum like this before, your comment unfortunately comes across as very excluding. It makes me feel there are a set of unwritten rules that I should know, and that I don't know them shows that the forum is not for me. In short, it's exactly the kind of response that stops people like me using forums like this.
I'm sure it's not intended to be received like this and I am sure that the way you have responded is quite normal in the rules of a forum like this. However, it is not normal for those of us who aren't familiar with forums and who only encounter them when they have a genuine problem. This is why I hope it is helpful to respond in full.
The reason I posted here is as follows. I was directed here by the apple support website. The original comment seemed to be the only one I could find which referred to my issue. As there is no obvious guidance on how to post on a forum like this it seemed perfectly reasonable to try and join in a conversation which might solve more than one problem at once.
Bee's reply however is both helpful and warm. This could in fact be a template for how new members should be welcomed and inducted into the rules of the forum in a friendly and inclusive way. Thank you very much indeed Bee!

HT201250 Can i store my files on time capsule from my ipad, and copy them back, without using itunes to sync the tablet?

Can i store my files on time capsule from my ipad, and copy them back, without using itunes to sync the tablet? i want to buy an iPad Air and to forget my laptop and i think that even the 128 gb wont be enough some times. I am wandering if time capsule can be used as external hdd and to connect on it via wifi ...

No. You cannot access your Time Capsule directly from an iOS device. The only way to back up an iOS device is to a computer through iTunes or to iCloud, though in some cases you can open and save files via another cloud-based service such as Dropbox.
Regards.

Reading from XML file and updating the table ????

Hi
I have package which reads the hier.XML file and does Update inserts into the 5 tables
i have table called MAIN_tbl with the column cur_date.
The package kicks if this cur_date is one day less than the hier.XML file DT.
Currently i m manually checking this date's to make sure the Main_tbl cur_date is n sync with
hier.XML file DT.
for example :- hier.xml file DT is "20091020" then main_table cur_date should be 10/19/2009
in order to kicks of the pakage.
what i m looking to do ??
compare the hier.xml DT with the main_table cur_date,
if cur_date is -1(Preivous day) of hier.xml DT then run hier_pkg(Package)
if not then update main_table cur_date to -1(previous day) of the hier.xml DATE
Then later write the above logic to update the main_table in a procedure, and
then call the package from the procedure.
below are the top few lines of the hier.XML file which is relevant to the one which we are trying to do
<?xml version = '1.0'?>
<HIER_POSTING num ="111" HIER_TYP="CD" DT="20091020" Global="Y">
FYI : The hier.XML file is located in UNIX space.
How do i accomplish this. any idea ????
Thank you so much in advance. For giving a thought on this problem!!!

Any thought on this guys ???
Thanks!!

Read data from xml files and populate internal table

Hi.
How to read data from xml files into internal tables?
Can u tell me the classes and methods to read xml data..
Can u explain it with a sample program...

<pre>DATA itab_accontextdir TYPE TABLE OF ACCONTEXTDIR.
DATA struct_accontextdir LIKE LINE OF itab_accontextdir.
DATA l_o_error TYPE REF TO cx_root.
DATA: filename type string ,
 xmldata type xstring .
DATA: mr TYPE REF TO if_mr_api.
mr = cl_mime_repository_api=>get_api( ).
mr->get( EXPORTING i_url = 'SAP/PUBLIC/BC/xml_files_accontext/xml_accontextdir.xml'
 IMPORTING e_content = xmldata ).
WRITE xmldata.
TRY.
CALL TRANSFORMATION id
 SOURCE XML xmldata
 RESULT shiva = itab_accontextdir.
CATCH cx_root INTO l_o_error.
ENDTRY.
LOOP AT itab_accontextdir INTO struct_accontextdir.
 WRITE: / struct_accontextdir-context_id,
 struct_accontextdir-context_name,
 struct_accontextdir-context_type.
 NEW-LINE.
 ENDLOOP.</pre>
 
Description:
In the above code snippet I am storing the data in an xml file(you know xml is used to store and transport data ) called 'xml_accontextdir.xml' that is uploaded into the MIME repository at path 'SAP/PUBLIC/BC/xml_files_accontext/xml_accontextdir.xml'.
The below API is used to read a file in MIME repo and convert it into a string that is stored in ' xmldata'. (This is just a raw data that is got by appending the each line of xml file).
mr = cl_mime_repository_api=>get_api( ).
mr->get( EXPORTING i_url = 'SAP/PUBLIC/BC/xml_files_accontext/xml_accontextdir.xml'
 IMPORTING e_content = xmldata ).
 Once the 'xmldata' string is available we use the tranformation to parse the xml string that we have got from the above API and convert it into the internal table.
<pre>TRY.
CALL TRANSFORMATION id
 SOURCE XML xmldata
 RESULT shiva = itab_accontextdir.
CATCH cx_root INTO l_o_error.
ENDTRY.</pre>
Here the trasnsformation 'id ' is used to conververt the source xml 'xmldata' to resulting internal table itab_accontextdir, that have same structure as our xml file 'xml_accontextdir.xml'. In the RESULT root of the xml file has to be specified. (In my the root is 'shiva').
Things to be taken care:
One of the major problem that occurs when reading the xml file is 'format not compatible with the internal table' that you are reading into internal table. Iin order to get rid of this issue use one more tranformation to convert the data from the internal table into the xml file.
<pre>TRY.
 CALL TRANSFORMATION id
 SOURCE shiv = t_internal_tab
 RESULT XML xml.
 CATCH cx_root INTO l_o_error.
ENDTRY.
WRITE xml.
NEW-LINE.</pre>
 
This is the same transformation that we used above but the differnce is that the SOURCE and RESULT parameters are changed the source is now the internal table and result is *xml *string. Use xml browser that is available with the ABAP workbench to read the xml string displayed with proper indentation. In this way we get the format of xml file to be used that is compatable with the given internal table.
Thank you, Hope this will help you!!!
Edited by: Shiva Prasad L on Jun 15, 2009 7:30 AM
Edited by: Shiva Prasad L on Jun 15, 2009 11:56 AM
Edited by: Shiva Prasad L on Jun 15, 2009 12:06 PM

How to extract data from xml file and store that data inti data base table

Hii All
I have one table that table contains one column that column contain an XML file
I want to extract data from that XML file and want to store that extracted data into an other table.
That xml file has different different values
I want to store that values into table in diff diff columns

Hi,
I am also facing the same problem.I have a .xml file and i need to import the data into the custom table in oracle database.
Can you please let me know if you know the solution how to do it in oracle apps.
Thanks,

Read rtf contents from xml file and print them in pdf using documaker

Similar Messages

Maybe you are looking for