Read user selection from slicer of pivot charts

I want to read the slicer selection made by user and use those values to get the data from SQL.

Hi,
Do you want to query the data from SQL by using slicer in pivot charts? If it is, please try to following steps:
1.Click anywhere inside the Profit % by Category PivotChart to display the PowerPivot Field List.
2.In the PowerPivot Field List, locate the DimDate table.
3.Drag CalendarYear and CalendarQuarter to the Slicers Horizontal area of the PowerPivot Field List.
4.Under the Geography table, select ContentinentName.
5.To the Slicers Vertical area of the PowerPivot Field List.
http://msdn.microsoft.com/en-us/library/gg399133(v=sql.110).aspx
If I misunderstand, please share us more information for you needs and some screenshot.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Read user groups from realm. Admin rights to each user ??

Greetings to ALL,
I am reading users, groups from realm. If I give the user admin priviliges I am
able to get the information else I get the error weblogic.management.NoAccessRuntimeException:
Access not allowed for subject: principals=[ruser1, B10AP01, B10MP01, B10MP03A,
B10MP03], on ResourceType: Security:Name=myrealmDefaultAuthenticator Action: execute,
Target: listGroups
Is there more effective way to read the information.
I can execute the program standalone ( from DOS PROMPT) and read all information
if I do the following
adminHome = (MBeanHome) Helper.getAdminMBeanHome (username,password,url);
But when calling from the application I get the above error.
Any code, suggestion will be very helpful.
Fred

"Fred Boon" <[email protected]> wrote in message
news:3fa7cb98$[email protected]..
>
Greetings to ALL,
I am reading users, groups from realm. If I give the user admin priviligesI am
able to get the information else I get the errorweblogic.management.NoAccessRuntimeException:
Access not allowed for subject: principals=[ruser1, B10AP01, B10MP01,
B10MP03A,> B10MP03, on ResourceType: Security:Name=myrealmDefaultAuthenticatorAction: execute,
Target: listGroups
Is there more effective way to read the information.
Commo mbeans require admin role in order to be able to invoke methods.
I can execute the program standalone ( from DOS PROMPT) and read allinformation
if I do the following
adminHome = (MBeanHome) Helper.getAdminMBeanHome (username,password,url);
But when calling from the application I get the above error.
Try doing a runAs with a subject that has admin role.

Distinguishing user selections from programmatic selections in JList

I have two jlists., and registered a subclass of ListSelectionListener on each list. When the user selects a record in the first list part of of the code I have written sets a selection on the second list which is correct, but then this triggers the listener on the second list to receive an event, and run its listener code which is not what I want.
I want to be able to identify a list selection caused by the user selecting a record in the list rather than the a programmatic selection, so that i can ignore programmatic selections.
Checking event.getSource() is no good as it always just returns the JList itself regardless of whether it has been done programtaically or by a user.
I tried checking list.isFocusOwner() , figuring that only lists that had been user selected would be focus owner. This works for Windows but on MacOS, it doesnt work the frst time you select something from the list after moving from another component (it does work after that).
How do i do this, thanks Paul

an alternative is to set a flag
boolean fromList1Listener = false;//class field scope
list1Listener
fromList1Listener = true;
change list2 selection
fromList1Listener = false;
list2Listener
if(fromList1Listener == false)
normal code goes here
}

How to let the user select from more then 1 data templet file to fillin a field

help i have a form the has 5 free form text fields that i need to select from a list of texts to fill it in and then allow the user to add to the data.
thanks

thanks here are 2 strings
COPD continue O2 by NC/Albuterol MDI/ Atrovent MDI/ Duonebs/ Albuterol MDI/ Prednisone taper/ IV Solumedrol/ Spiva/ Advair diskus/ oximetry prn/ PT/ OT/ Coreg
CAD/ANGINA cont. O2 by NC?baby ASA/ ASA/ Lopressor/Atenolol/ Lisinopril/ Low fat diet/ PT/OT/ sublingual nitroglycerin prn/ Lasix/ Lipitor/ Zocor/ Mevacor
i would like the user to be able to select from inside of the field when it is blank (fisrt time entering data)
thanks again

How to read User ID from the request Form and pre populating in the AD User process form before provisioning

I am trying to read the user Id from the submitted AD User request form( Catalogue AD User form. I need User Id,firstname and lastname inorder to prepopulate the common name as in this format - lastname,firstname (userid) for the user to be provisioned in Active Directory.
So after filling the AD User request form with User Id and Organization and submitting the request, I am trying to
prepopulate the common name in the process form before the provisioning.
The prepopulate adopter for the common name is configured to read the firstname, lastname and userid. firstname and
lastname variables are mapped to User definition and user Id is mapped to Process Data. In this setup I am not getting the
User Id value from process data, it is empty.
Is this a bug with OIM 11g R2 or I need to do it differently in order to read the user Id that user has entered in the
request form for populating the common name?
Thanks

Ghulam Yassen wrote:
How to get USER_ID and IP_AddressWhy exactly do you need this data and what do you plan to do with it?
The data is not reliable and trustworthy. IP addresses can easily be spoofed (a few seconds if you know what to do and how to do it). Also, IP addresses are not static. Users also do not use the same network device to access the database - different devices will have different IP addresses.
The o/s user on the client is supplied by the client driver. This can also be spoofed.
The user can also use a virtualised device - which means that recording the IP and o/s user seen from the server side, is pretty much useless and meaningless.
So if this data is intended to be used for auditing for example - it would be pretty suspect data to use for that purpose.

How to assign tasks in Approval Workflow to a set of users selected from a Lookup table

Hi all,
I am new to Project Server and I am using Project Server 2013 On premises deployement. Please help me on how to achieve the below scenario:
I have a requirement where, the initial PDP will have 2 fields (Reviewers and Approvers), wherein the engineer himself will select who the reviewer and approver from the Lookup tables.
Now I have to start task process with these selected people for approval.
Say for example , engineer has selected Alice and Bob as 2 reviewers, then
In the workflow I have :
Start Task process with
Project Data: Reviewers (which is giving error as
[System.ArgumentException: AssignedTo at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager
bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation) ]
Then I tried logging the value of Project Data: Reviewers, It logged the value as Alice, Bob (which looks pretty good),
Then I tried assigning only 1 person as Reviewer, then also I get the same error.
So can anybody please tell me where I went wrong. Is it not possible to fetch the data from the values selected as Project Data from the Lookup tables ? If not then what is the workaround I can use to achieve this ?
Thanks,
Shanky

Hi Paul,
Yes I am using SP designer for Workflows. And yes, You were right, there was a mismatch in the names of AD account and the Lookup table, now with 1 person selected from the lookup table it is assigning the task properly. However with multiple selection,
it is failing.
As Robert mentioned, the fetched value is a text as "Alice, Bob", which makes 2 usernames as a single text. So when I try to assign a task to this group, which returns value as "Alice, Bob", workflow fails to find such AD user, as it
is an invalid value.
So is there any way I can seperate this out to form 2 different username ? I checked for string extraction function in th Workflow, but nothing helped me for this scenario.
Any input will be helpful.
Thanks,
Shanky

Best way to make my WDA read only when user selects from FPM toolbar

Using FPM, we've inserted a custom web dynpro application to maintain our gate dates in PPM 5.0.
When the user presses the Read Only button on the FPM toolbar, what's the best way to turn our fields off? Just create a new attribute in our Component Controller context node and bind it to all the screen fields?

Hallo Robert,
I think it is the best and easy way to realize this.

Read Infopackage selection from a table using ABAP

Hello Experts,
I have a flat file consisting of 3 columns which I want to use as selection fields for the Infopackage. Now, is it possible to load this flat file to an ODS or a master data table and then write some ABAP in the Infopackage to read the values of the columns and populate the selection fields.
This is what I want: The columns of the flat file are - Company Code, Doc number, Fiscal Year
Now, I loaded this file into a tables (around 2 million records) and then use ABAP to populate the entire file into the selection tab of the Infopackage.
What would be the best approach for this?
Thanks in advance
Vivek

Hi,
It's possible in theory. Just one thing, too many selections in an InfoPackage may not work (I remember about 1,000 or 10,000, not very sure).
I'd like suggest loading a range rather than so many selections. For example, say you have below documents:
1000
1001
1005
1010
Then just load from 1000 to 1010, and create a start routine in your update rule/transformation. There you can do this:
1. select records from the table where you store flat file, using the same selection (1000 to 1010)
2. For every records in DATA_PACKAGE, using READ TABLE statement to check whether that record exist in the table. If not exist then simply delete it from DATA_PACKAGE
I think that would have much better performance. Let us know if you have further questions.
Regards,
Frank

Displaying user selection from drop down list in static text on master page

Hello,
I am using LC 7.0 at workk and I have hit a road block.
I have a drop down list at the top of the form. Once the user makes a selection, I want to take that value and paste it in static text located on the master page. I can't seem to get it to work.
Please help!!!

Hi,
Place the Drop Down list on form
Place text object(s) on master page
here is the script to display the value and/or text of drop down
Script will be on Drop Down list events
Calculate event to display value of DD - FormCalc
form1.pageSet.Page1.StaticText1.rawValue = this.rawValue;
Change event to display Text of DD - JavaScript
form1.pageSet.Page1.StaticText2.rawValue = xfa.event.newText;
SAVE the form as dynamic pdf.
Hope this will help.
Thanks,
Raghu.

Lock users selected from query.

I need to have the user IDs that are selected using the query I've pasted below locked. My thought was to put the query into an array and then use a loop to run through the array with the "alter user user_id account lock" command but I have no idea how to get that far is that even possible with plsql? Or perhaps there is a better way to do this. I would then be running this script once a week to make sure all of these users are locked.
select username from dba_users where username like '_Z%'
minus
select distinct schema from monadmin.log_info where timestamp>=sysdate-92
minus
select account_status from dba_users where account_status = 'locked';

select account_status from dba_users where account_status = 'locked';This will not return anything as the status is LOCKED not locked.
secondly you will get account_status not the username
BEGIN
    FOR rec IN (
                 select username from dba_users where username like '_Z%'
                minus
                 select distinct schema from monadmin.log_info where timestamp>=sysdate-92
                minus
                 select username from dba_users where account_status like ( '%LOCKED')
               ) LOOP
      EXECUTE IMMEDIATE 'ALTER "' || rec.username || '" ACCOUNT LOCK';
    END LOOP;
END;
/ Alvinder
Edited by: alvinder on Mar 18, 2009 10:54 AM

Read user name from Header of SOAP Sender

Hi All,
Is there any way to read value of "sap-user" passed in below URL.
http://<server>:<port>/sap/xi/adapter_plain?namespace=<sender_ns>&interface=<sender_mi>&service=myservice&party=&agency=&scheme=&QOS=BE&queueid=httpclient&sap-user=<sap-user>&sap-password=<sap-password>&sap-client=<sap-client>&sap-language=<sap-lang>
I tried using DynamicConfiguration in my SOAP sender adapter with "SRemoteUser" variable, it did NOT work for me.
Are there other options like Runtime Constants in JAVA Mapping etc.
Thank you,
Smita

Hi Smita,
I am not sure if this is the question you are asking for sender SOAP adapter or HTTP Adapter?
Please refer the below statement.
SOAP Adapter:
The inbound address for SOAP messages is: http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
HTTP Adapter:
The plain HTTP adapter is used by external systems to connect to the Integration Engine using the native HTTP interface (HTTP payload without SOAP envelope). These systems are connected using the Internet communication framework of the SAP Web Application Server. For this purpose, the Integration Engine HTTP inbound channel contains an HTTP service delivered by SAP, called /sap/xi/adapter_plain.
Queries entering the plain HTTP adapter must have the following syntax:
http://<hostname:port>/<path>?<query-string>
The query string contains the following data:
● Sender namespace ?namespace=<namespace>
●Sender interface &interface=<interface>
These details define the sender interface.
●Sender service &service=<service>
Specifies the sender service.
●Sender party (optional) &party=<party>
●Sender agency (optional) &agency=<agency>
●Sender scheme (optional) &scheme=<scheme>
If you are asking for HTTP Adapter, then I can tell you.
Please confirm.
Regards
B.Dheepa

Reading user input from a form within a workflow and perform actions in workflow based on the input

Sharepoint 2013
Need to get input from a user based on some condition within a workflow and based on the input received continue with the workflow. It can be a form with a text box and button to which i can redirect and when user enters a value and clicks on the button
,I should come back to the workflow and perform other processing. I should also be able to manually start this workflow from VS.
Tried different approaches like initiation forms ,user input action of SP2010 etc all of these approaches either add some tasks to task list or force me to click on the workflow link to get input from a user.
Any suggestions on this?

Hello
Thanks for the code, but I don't need an array of beans. By the way this code make a bean and an arraylist everytime it's called?
I was looking for something like this:
<form action="myjsp.jsp" method="post">
...so after submitting the result will go to the myjsp.jsp file and in the myjsp.jsp file
<jsp:useBean id="value" class"myBean">
<jsp:setpropertiy name"value" ....>so everytime I click the add button the values will go the mysjp.jsp file and that will set them in the javabean file. this method uses two files but I was looking for doing this in the same jsp file and not sending it to another file.
chers
Ehsan

Help with reading in command from keyboard

i need to read user response from the keyboard, how should this be done with system.in. or should i used JOptionPane to show input dialog?

Depends on what you want to do.
using System.in:
import java.io.*;
public class rin
public static void main(String[] args)
DataInputStream ins=new DataInputStream(System.in);
try
String cmd =ins.readLine(); //Reading from Keyboard
System.out.println(cmd);
catch (IOException e)
System.out.println(e);
}

Reading user input in console

I want to read user information from the console.
How can I flush the buffer before reading the next input from the user?

buff = new BufferedReader(new InputStreamReader(
System.in )); System.out.print("Enter
Character:");
System.out.flush();
String s = buff.readLine();
c=s.charAt(0);
System.out.println("You entered " + c + " " + s);
this is cleaner and more efficient. and is the flush
to System.out realy neccesary? isn't System.out
initialized so that any data written is automaticaly
flushed?Always other ways of doing things, in this case, probably your way is superior. But ... if you do:
      st = new StringTokenizer(S);
      byte b = Byte.parseByte(st.nextToken());... you can make a quick switch for other kinds of data. You could also do:
      String s2 = s.substring(0,1);
      byte b = Byte.parseByte(s2);I suppose. Options ... have a great weekend;
~Bill

How to make a report to display next 18 months of data with when user select a particular month from the filter in power pivot tabular model.

Hi,
i have a dimension table with month_key having values (201201,201202,201203.......202011,202012) and month name ( Jan 12, feb 12,......NOV 20, Dec 20) and a fact table with columns (month_key ,measure_types, Amount)
My requirement is to create a power pivot report in which when a user select a month from the filter, the report should display the (selected month+18 ) month's data against each type . when JAN 12 is selected ,the jan 2012 +18 = june 2013
, month name should be populated with months till june 2013 only .
i tried creating calculated column"END DATE " in the fact table with dax expression to calculate the 18th monh from the current month as below
month_key END DATE
201201       201306
201202       201307
and thought of filtering the table with month key <= ENDDATE but it is not working as expected. could you please guide me on this ? Is there any time intelligence function that serve the purpose . Iam using excel 2010
..hence could not do any calculation on the report side also. please suggest .
Thanks in advance

Do you need to show the measure calculated for those 18 months as a total on 1 row, or do you need to select a single month and then display on row filters 18 distinct rows?
The first is trivial as driezl has suggested.
The second will require a second calendar table.
I created this example workbook for a coworker who had a similar problem. You will have to use the disconnected table as your filter and pull your related table onto the rows.
Finally, the easiest way to deal with the sort of date arithmetic you need to do is to restructure your date table to have a series of "Sequential" fields. These fields should be the number of units of time since the beginning of your calendar.
For example, consider a calendar starting on January 1, 2010. For January - December 2010, [MonthSequential] = 1, 2, ..., 12. For January - December 2011, [MonthSequential] = 13, 14, ..., 24, and so on, incrementing by 1 for each sequential month in time.
Assuming you have this set up in your date tables (one related to your model - DimDate - and one disconnected - DisconDimDate) your measure would look like this:
18 Month Measure:=
CALCULATE( [Measure]
, FILTER( DimDate
, DimDate[MonthSequential] >= MAX( DisconDimDate[MonthSequential] )
&& DimDate[MonthSequential] <= MAX( DisconDimDate[MonthSequential] ) + 18
Please review this example along with the workbook I have linked above.

Read user selection from slicer of pivot charts

Similar Messages

Maybe you are looking for