Reader won't allow me to print in "high quality" mode.

Hello. I am trying to print high quality, color brochures. Reader will print the brochure, but when I try to change the preferences to high quality and indicate that the file contains portraits, it doesn't save these preferences and instead, prints in normal quality.
Please advise.

Dave, thanks for the response. I'm trying to find a menu which allows for the options you have shown. All I'm able to access is the following and even then, I can't change any of the settings:
http://i2.photobucket.com/albums/y45/afrodork/BrochureIssue.jpg
and
http://i2.photobucket.com/albums/y45/afrodork/BrochureIssue2.jpg
I have printed this particular brochure many times in high quality from this computer and others. However, now, the control menu that used to pop up after I sent a command to print has changed (an update?). Now, since the new control menu, I have this issue.
I hope that sheds some light on my issue...

Similar Messages

I have a HP Officejet Pro L7780. Recently it won't allow me to print from websites,

I have a HP Officejet Pro L7780. Recently it won't allow me to print from websites, The only way I can print is to 'copy' it to a word document then print. ANy suggestions as this has only recently been an issue.

Trying running the Print Diagnostic Utility and see if it finds any errors http://http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91799-1&lc=en&dlc=en... . If that does not fix the issue try uninstalling the software and reinstalling it.
Although I am an HP employee, I am speaking for myself and not for HP.

Why does my new Adobe Reader XI not allow double sided printing?

Why does my new Adober Reader XI not allow double sided printing as the previous version did?

Moving this discussion to the Scanning & OCR forum.

All my pdf files can be printed in low quality on my Brother printer but can't print in high quality in the printer menu.

My problem is that all my pdf files can be printed when I choose "low quality printing" in my Brother printer menu but cannot be printed in "high quality". When trying to print in high quality, the documents load in the printer tray and it says 1 document then disappears and 0 document printing is showing. I have some pdf files that I want to print in color in high quality and black and white but I'm unable to do so. It only prints in low quality for both color and black and white.

Hello,
1. Please make sure that your Reader is updated to 11.0.09. Go to Help -> Check for Updates.
2. Also, please check if there is any new update available for your Printer Driver.
Regards,
Anoop

Printing in high quality

Hi,
I have a HP Photosmart 4280. Recently, it will not print in high quality, from applications and the internet. I do not believe I changed any settings. I have reset the printer several times. My OS is Leopard 10.5.8. Thanks for any help in advance.

In the print dialogue box at the bottom click on Show Details. Then from the main part of the box there are drop down menus where you should be able to select the print choices you want.

Airport time capsule won't allow me to print over wifi

I just bought an airport time capsule 2TB. I set it up and almost everything works great. I have a printer that is not wireless. It's a brother 7065DN. I was told by an apple employee that if I plug the printer into the airport time capsule it will allow me to print wirelessly from my macbook pro. However, this does not work. I'm not that big into technology but if anyone knows how I can fix this please let me know. It would be nice not to have to plug my laptop in all the time to print a short

You do it the same way you did when you installed the printer on your Mac.
Connect the printer to the USB port on the Time Capsule
Power up the printer
Click System Preferences (gear icon on the dock)
Click Print & Fax
Click the + (plus) button at the bottom of the printer list
Hopefully, your printer will appear.... IF......it is compatible with the TIme Capsule
Click on the name of the printer to highlight it
Click Add
Now try to print. When you open the Print dialog box, it will appear as if you have two printers installed......because you do. One is installed on the Mac. The other is installed on the Time Capsule
You must choose the correct printer at the Time Capsule to be able to send the print command to the printer at the Time Capsule.

Reader won't allow me to sign in to convert a file

I have reset my password twice
I can log on to my website account just fine with the new password
My subscription in paid and active

Convert from what to what?
What exactly means "won't allow" - do you get any error message?

Adobe Reader 9.4 won't allow saving-copying-printing of data entered into form fields.

Hello, all. I own a fully automated Continuing Education website with a national customer base. The release of Adobe Reader 9.4 has brought a major problem for us which we haven't been able to overcome, and it's a critical issue which will destroy our business if the problem continues.
The problem: Our professionally licensed website users earn online, instantly downloadable Continuing Education certificates in PDF file format, which are auto-generated by our software program when the user has successfully completed a course and its quiz.
Each certificate is a template created by Adobe Acrobat Pro 6 which contains the boilerplate course goals, credit hours earned for the course, plus all of our educational approval numbers needed to conduct business in each state. THE PROBLEM HERE is that these generated certificates ALSO have form fields which are auto-completed by our system when the user successfully completes his or her course - i.e., the user's name, his license number, and the date and hour and minute of completion. Until some of our customers began to use Adobe Reader 9.4 on their PC this past week, the certificate generation process has performed flawlessly - for over 3 years now, for over a thousand customers - the only exception being the occasional MAC user who needs to download the correct version of Adobe Reader, and to use the correct browser.
Beginning last week, site users who have downloaded 9.4 can no longer SAVE their Continuing Education certificates to their computer with their name, license and date and time of completion showing on the certificate.   And they can't even print the certificate correctly - their name, license, and date of completion appear as blank lines. They can't download or email the certificate with the critical form field data showing on the document. This is a devastating situation for our business and for the users - who certainly won't return, and are demanding refunds.
In fact, I (who installed 9.4 last week) discovered that I can't even download and save an intact copy of a customer's certificate from my own website, OR copy and paste information from a client's generated certificate in order to manually create a certificate for him or her. The on-screen message tells me that I am not allowed to do this with this document .... despite the fact that I was the creator of the document. Needless to say, when I un-installed 9.4, I had none of these problems.
Customers wouldn't have problems either if they uninstalled 9.4 - but you can't tell customers who call in to complain, to uninstall their Adobe Reader program and find something else. They also have to use Adobe Reader to view over half of the courses we offer, and they need to be able to work with them effectively with no problems.
In the past, because of occasional Adobe Reader problems of a different sort, we could tell customers to use Foxit or Nitro PDF if they had Adobe issues. But that was back in the day when there was no competition in running an online CE website. Now there is plenty of competition, and customers will just go elsewhere before they will try to reconfigure their computer just to stay with our site.
I will bet that hundreds (thousands?) of other online businesses who work with system-generated form fields in PDF documents have been similarly affected.
Is there a solution here? Surely this was an UNINTENDED result of Adobe's upgrade to 9.4.   Is there something that we can do at our end to eliminate these issues? There are NO security protections or limitations imposed on these certificate documents. And we CANNOT eliminate the form fields that are filled internally when the customer passes t the course. Date and time of completion and all the rest are required by all of the States which license us. Many thanks!

That was it!
Thanks

Firefox won't allow me to print a Web Page. The only option I am given is to Save the Web Page as a PDF File .

In FF 16.0.1 when I try to print a web page I get dialog box to save it as PDF. There is no other choice in the ‘save as type’ box. I do not want to save it; I just want to print it. This happens whether I use ‘file/print’ or the print button on FF. I use Win XP and HP all in one C7280 and no changes have been made recently to either. I looked for FF add- on to disable called ‘hp smart web printer’ that I read about in a closed FF support thread about this same problem but it is not on plug-in or add-on list. I also read in another closed thread on this issue to remove SWP using add/remove programs but its not listed. I believe this problem began when FF upgraded itself to 16.0.1 recently. The problem does not exist when I use I.E. or Chrome so logically it must be a FF issue. Its driving me crazy and I cannot find a solution that works anywhere. HELP please.

Old Fox....thanks so much. I do not have the HP smart web printing in my add ons or plug ins. I used SWP in my problem posting and should have spelled out HP smart web printing..sorry.
The NAME of the printer showed 'document converter'. WELL DUH! That was the problem all along. I have no idea how it got changed but I won't dwell on it. I have never had to look at those 'choices' because I don't need to change anything when I print but its never too late to learn.
I am so happy and thanks again
Terri

Adobe reader will not allow me to print - Mac OSX 10.4.11 Power PC Quad

Been up all night reading about everyone else's problems with this. Installed a new 1 TB hard drive from ground up.   Everything works perfect EXCEPT Adobe Reader.   I have tried installing BOTH Adobe Reader 8 and 9. Each gives the same error message: "This document could not be printed."    Tried removing version 9, and reinstalling version 8 - still the same message.
Help please.

On my movie I did not use any video, it is all pictures that are into a slide show.
As I went to Share to Media Browser and the selected Large and hit Publish, a progress bar popped up and then imovie crashed within 5seconds of the progress bar appearing. This is what my Mac told me whaen it crashed.
Also, when I select view full screen so I can watch the movie on my Mac it loads up and gets to the first slide and then instantly crashes. (I don't know if that is significant or not)
Process:         iMovie [847]
Path:            /Applications/iMovie.app/Contents/MacOS/iMovie
Identifier:      com.apple.iMovie8
Version:         8.0.6 (821)
Build Info:      iMovieApp-8210000~16
Code Type:       X86 (Native)
Parent Process: launchd [89]
Date/Time:       2011-12-17 10:50:28.532 -0800
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          268958 sec
Crashes Since Last Report:           24
Per-App Interval Since Last Report: 76922 sec
Per-App Crashes Since Last Report:   24
Anonymous UUID:                      E4CDF769-9D32-451C-939F-B0978C35FCC2
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000fffe61a0
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
Anything else I could try?
Thank you for your help.

Get error message re: bug in version 9.0.1 that won't allow viewing or printing from some websites.

BC Vital Statistics website advised there was a problem with version 9.0.1 of Mozilla with printing documents. Today we tried printing .pdf documents in emails and although the printer is connected and working for other .pdf docs. nothing happens when we hit 'print' for these ones.
There's no URL for today's problem. This is .pdf doc in email that won't print.

If we run the URL we get back a 404 like:
404
/somefolder/?.jsp/
java.io.FileNotFoundException: /somefolder/?.jsp/
at jrun.servlet.file.FileServlet.service(FileServlet.java:356)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Similar 404 message if we manually visit a non-existent .aspx page (we don't have any .aspx) But security scan does not report any troubles with .aspx.
One idea we are thinking is to adjust IIS by removing doc types we don't need like .jsp, .asp, .aspx.
This place seems to have an answer but I was looking for a free good answer first:
http://www.experts-exchange.com/Software/Server_Software/Web_Servers/ColdFusion/Q_25858705 .html

Printer in error state won't allow me to print!

I am in desperate need of HELP!! My printer just decided to come up with this error message:
*** printer in error state ***
I've rebooted to a safe place, printer worked fine then I needed to print a return lable for an item that needed to be sent out & thats what came up on the screen! If anyone out there could help it would be appreciated.

Hi Guy2013,
Sorry to hear about your printing issues. I will be happy to help but I will need more information. What printer are you using? What operating system are you running? What is your product number? That “printer in error state” message is on the printer, correct?
Find your product number on a desktop:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07555
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HT1455 disc error and won't allow me to start up in safe mode.

Disc error for main HD. My laptop shuts down in the process of rebooting, I can only access disc utility when I hold the option key during startup. I also can't open in safe mode, but I can't remotely access my laptop to remotely access it in safemode through my other mac because I have remote access turned off. I'm just trying to safely backup my laptop and will reformat the disc. Any advise will be appreciated.
Thank you,
Chappie001

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Need help with printing black and white pdf print at higher quality.

We are a machine shop and many of our customers supply their prints for the tooling we need to make in .PDF file formats. The problem is that some of the files are NOT of great quality. They seem very faint. I can view them on my computer no problem and when I zoom in, the quality is good, but whey they print, the dimensions and lines are very faint. I have been pounding my head to come up with a way to improbe the quality in the following characteristics: contrast, line quality, darker dimensions and lines, etc. But I just cannot get anywhere. Is there anyone that could give me some insight into how to do this. If so, he or she would have my undying gratitude (which probably is not worth much, but sounds good!)
The other thing is that some of our customers send their prints in .TIF or .TIFF file formats. Is there any way to convert them to PDF and get good quality? These .TIF and .TIFF files are a little worse than others.
Thanks ahead of time!
Yok33

I am going to try these suggestions immediately! Thank you so much for the information. Wish me luck!
Thank you and have a GREAT day!
Steve Yokom
Manager
Northern Precision Inc.
Phone: 989-736-6322
Email: [email protected]

I recored a dancing video, and I edited it on IMovie (Mac OS X 10.6.8)) and it won't let finalize it into a higher quality other than the mobile quality .. HELP ??!!!

HELP !

Hi
Frist thought is - is there enough free space on Your start-up Hard disk ?
If you got more than 25gb then the problem is elsewhere - as
- trash the iMovie pref filé
- repair permissions
- repair Hard disk
Yours Bengt W

Reader won't allow me to print in "high quality" mode.

Similar Messages

Maybe you are looking for