Reading data from tables SXMSCLUP and SXMSCLUR

Hello!
In BI 7.0, there is no Delta Q for loading XML data. We are using a functional module in ABAP proxy, to push data from XI directly into BI PSA.So in the PSA, we get the records which have successfully reached.
But for the failed records, we can see them in XML format in the tcode :SXMB_MONI.
Now, my requirement is to extract the primary key of the data in the payload and create a csv file, saying that this records have failed.
For that, i found that the data is stored in tables SXMSCLUP and SXMSCLUR, but in Hexadecimal format, i.e. kind of encrypted.
I was wondering how to extract and read this data... that too, only 1 field in the data?
In SDN there is a post which gives some Java classes, but i was hoping if there is an easier way out, maybe in ABAP??
Any help in this would be appreciated.

HI,
Please try to see the below links
/people/kamaljeet.kharbanda/blog/2005/09/16/xi-bi-integration
/people/sergio.locatelli2/blog/2006/10/15/integration-sap-bi-and-xi-a-critical-point-of-view
/people/marian.harris/blog/2005/06/23/need-to-get-a-sap-netweaver-component-implemented-quickly-try-sap-best-practices
/people/sravya.talanki2/blog/2006/12/08/business-case-integration-need-of-bi-and-sap-xi-episode1
/people/ginger.gatling/blog/2005/12/02/innovative-ways-to-use-alerts
/people/community.user/blog/2007/01/08/access-netweaver-how-to-guides-from-one-consolidated-page
/people/sravya.talanki2/blog/2006/12/14/business-case-integration-need-of-bi-and-sap-xi-episode2
See the michal's reply and other reply also how to see the blob fields data.
In Which Database Table the Messages are Stored in XI
Regards
Chilla

Similar Messages

How to read data from table GLFUNCA quickly?

Hello everybody!
Recently,my colleague has programmed a report about reading data from table GLFUNCA,and its speed is very slowly and exceeded limited time sometimes .
Excuse me?
how to use INDEX and VIEW TO accelerate it?
pls supply my helpful solutions.
Thanks!
Best wishes!

Hi,
Please check your SELECT statement to find out what are the columns being used in the WHERE clause. Then go to SE11 and find out if there are indexes on those columns.
If Indexes don't exist then you can create indexes on those columns, which might improve the performance.
However, there might be other areas also, where the performance can be improved. Do a run time analysis / trace and figure which part of the program is taking maximum time.
Regards,
Ravi
Note : Please mark the helpful answers

Reading Data from Unix file and write into an Internal table

Dear all,
                 I am having an requirement of reading data from unix file and write the same into an internal table..how to do that ...experts please help me in this regard.

Hi,
do like this
PARAMETERS: p_unix LIKE rlgrap-filename OBLIGATORY.
DATA: v_buffer(2047) TYPE c.
DATA: BEGIN OF i_buffer OCCURS 0,
        line(2047) TYPE c,
END OF i_buffer.
* Open the unix file..
OPEN DATASET p_unix FOR INPUT IN TEXT MODE.
<b>IF sy-subrc NE 0.
*** Error Message "Unable to open file.
ELSE.</b>
   DO.
     CLEAR: v_buffer.
     READ DATASET p_unix INTO v_buffer.
     IF sy-subrc NE 0.
        EXIT.
     ENDIF.
     MOVE v_buffer TO i_buffer.
     APPEND i_buffer.
ENDDO.
ENDIF.
CLOSE DATASET p_unix.
<b>Reward points if it helps,</b>
Satish

Reading data From XML file and setting into ViewObject to Pouplate ADF UI

Hi,
I have following requirement.
I would like to read data from XML file and populate the data in ViewObject so that the data can be displayed in the ADF UI.
Also when user modifies the data in the ADF UI, it should be modified back into to ViewObject.
Here is an example - XML file contains Book Title and Author. I would like to read Book Title and Author from XML file and set it into ViewObject Attribute and then display Book title and Author in ADF UI page. Also when user modifies Book title and Author, I would like to store it back in View Object.
Please help me with this requirement and let me know if any solution exist in ADF, for populating the ADF UI screen fields with external XML file data.
Thanks

Read chapter 42 http://download.oracle.com/docs/cd/E16162_01/web.1112/e16182/bcadvvo.htm of the fusion developer guide
Section 42.7, "Reading and Writing XML"
Section 42.8, "Using Programmatic View Objects for Alternative Data Sources"
Timo

We want to read data from weigh bridge and display in oracle forms & store

Sir/Madam,
in our organisation we had one requirement. i.e is reading data from weigh bridge using serial port, displying that data in oracle forms and when ever user click save button we store that into my oracle database. we are using oracle 8i and forms 6i and windows OS environment. we don't know reading data from serial port and placing that into form items. please help me as early as possible if there is any property available in d2k regarding this requirement .
thank you,
vishnu

There's no property in Forms that makes you read serial ports, but as far as I know you need to know the API of the machine which you want to read data from (it should come with machine's manual) and then it will be easy to store it in forms item.
Tony

Read data from xml files and populate internal table

Hi.
How to read data from xml files into internal tables?
Can u tell me the classes and methods to read xml data..
Can u explain it with a sample program...

<pre>DATA itab_accontextdir TYPE TABLE OF ACCONTEXTDIR.
DATA struct_accontextdir LIKE LINE OF itab_accontextdir.
DATA l_o_error TYPE REF TO cx_root.
DATA: filename type string ,
             xmldata type xstring .
DATA: mr      TYPE REF TO if_mr_api.
mr = cl_mime_repository_api=>get_api( ).
mr->get( EXPORTING i_url     = 'SAP/PUBLIC/BC/xml_files_accontext/xml_accontextdir.xml'
              IMPORTING e_content = xmldata ).
WRITE xmldata.
TRY.
CALL TRANSFORMATION id
      SOURCE XML xmldata
      RESULT shiva = itab_accontextdir.
CATCH cx_root INTO l_o_error.
ENDTRY.
LOOP AT itab_accontextdir INTO struct_accontextdir.
    WRITE: / struct_accontextdir-context_id,
           struct_accontextdir-context_name,
           struct_accontextdir-context_type.
    NEW-LINE.
    ENDLOOP.</pre>
<br/>
Description:
In the above code snippet I am storing the data in an xml file(you know xml is used to store and transport data ) called 'xml_accontextdir.xml' that is uploaded into the MIME repository at path 'SAP/PUBLIC/BC/xml_files_accontext/xml_accontextdir.xml'.
The below API is used to read a file in MIME repo and convert it into a string that is stored in ' xmldata'. (This is just a raw data that is got by appending the each line of xml file).
mr = cl_mime_repository_api=>get_api( ).
mr->get( EXPORTING i_url     = 'SAP/PUBLIC/BC/xml_files_accontext/xml_accontextdir.xml'
              IMPORTING e_content = xmldata ).
    Once the 'xmldata' string is available we use the tranformation to parse the xml string that we have got from the above API and convert it into the internal table.
<pre>TRY.
CALL TRANSFORMATION id
      SOURCE XML xmldata
      RESULT shiva = itab_accontextdir.
CATCH cx_root INTO l_o_error.
ENDTRY.</pre>
Here the trasnsformation 'id ' is used to conververt the source xml 'xmldata' to resulting internal table itab_accontextdir, that have same structure as our xml file 'xml_accontextdir.xml'. In the RESULT root of the xml file has to be specified. (In my the root is 'shiva').
Things to be taken care:
One of the major problem that occurs when reading the xml file is 'format not compatible with the internal table' that you are reading into internal table. Iin order to get rid of this issue use one more tranformation to convert the data from the internal table into the xml file.
<pre>TRY.
      CALL TRANSFORMATION id
        SOURCE shiv = t_internal_tab
        RESULT XML xml.
    CATCH cx_root INTO l_o_error.
ENDTRY.
WRITE xml.
NEW-LINE.</pre>
<br/>
This is the same transformation that we used above but the differnce is that the SOURCE and RESULT parameters are changed the source is now the internal table and result is *xml *string. Use xml browser that is available with the ABAP workbench to read the xml string displayed with proper indentation. In this way we get the format of xml file to be used that is compatable with the given internal table.
Thank you, Hope this will help you!!!
Edited by: Shiva Prasad L on Jun 15, 2009 7:30 AM
Edited by: Shiva Prasad L on Jun 15, 2009 11:56 AM
Edited by: Shiva Prasad L on Jun 15, 2009 12:06 PM

Read data from excel sheet and then perform the required operations.

Hi all
I need to write a procedure which can read data from excel sheet.I have excel sheet in which i have to options one is modification and other is addition.so if it reads modification then i need to read the concerned table name then check its availability in pl-sql datbase.If table exists then reading the realated column in that row to fire the querry. The excel sheet is saved in local disk c.
can anybody help me with this.How i need to start specialy to read the data from excel sheet saved in local disk c.
Edited by: user13334062 on Jun 30, 2010 3:45 AM

Hi
If you can convert the excel to a csv format, then it can be simply query from DB Creating Oracle External Tables. Best part is that you may still change the CSV using EXCEL.
Following action Points can be adopt;
*1. Convert Excel File to a csv. File Save as CSV*
*2. Create Oracle Directory* ( This has to be the location of your excel file )
SQL> Create directory mydir as 'C:\testdb'; --- "testdb" is the location folder in win for your excel sheet.
*3. Create the External Table*
SQL> create table my_ext_tab (
Field1 Datatype,
Field2 Datatype,
Field3 Datatype,
Field4 Datatype,
Field5 Datatype
Organization external
(type oracle_loader default directory mydir
access parameters (records delimited by newline fields terminated by ',')
location ('my_ext_tab.csv'))
reject limit 100;
*4. Now you can query the table "my_ext_tab"*
Select * from "my_ext_tab";
Please avoid the reformat the data column inside the spreadsheet (CSV).

Reading data from table control in an internal table

Hello All,
I want to read the data entered in the screen in an internal table,screen has header segment fields of an idoc and two item segment fields with multiple occurance in form of two table control,have to read both the table control and have to pass it to idoc inbound function based on postion(posnr) of the order. can anyone provide me with the sample code for the same .
Thanks and Regards,
Gunjan

hi gunjan
refer to the folllowing code. it will work for u
Creation of an IDoc generation program
The following code extract contains everything needed to generate an IDoc from data contained in a table.
FORM F_110_SEND_IDOC.
CONSTANTS:
C_MESTYP TYPE EDIDC-MESTYP VALUE 'ZVISTAPM',"message type
C_DOCTYP TYPE EDIDC-IDOCTP VALUE 'ZVISTAPM01',"idoc type
C_SEGNAM TYPE EDIDD-SEGNAM VALUE 'Z1VISTAPM'."segment name
DATA:
I_ZVISTA_PM TYPE ZVISTA_PM_T OCCURS 6000,
I_EDIDC TYPE EDIDC OCCURS 0,
I_EDIDD TYPE EDIDD OCCURS 0,
WA_ZVISTA_PM TYPE ZVISTA_PM_T,
WA_EDIDC TYPE EDIDC,
WA_EDIDD TYPE EDIDD,
WA_Z1VISTAPM TYPE Z1VISTAPM,
V_OCCMAX TYPE IDOCSYN-OCCMAX,
V_NBSEG TYPE I.
CLEAR WA_ZVISTA_PM.
CLEAR WA_EDIDC.
* Save the message type and the basic IDoc type
* in the control segment
MOVE C_MESTYP TO WA_EDIDC-MESTYP.
MOVE C_DOCTYP TO WA_EDIDC-IDOCTP.
* Retrieve the maximum number of segments in the basic IDoc
* type
SELECT MIN( OCCMAX )
FROM IDOCSYN
INTO V_OCCMAX
WHERE IDOCTYP EQ C_DOCTYP AND SEGTYP EQ C_SEGNAM.
* Save the whole ZVISTA_PM_T table content
* in the I_ZVISTA_PM internal table.
SELECT *
FROM ZVISTA_PM_T
INTO CORRESPONDING FIELDS OF TABLE I_ZVISTA_PM.
* Create a data segment for each line of I_ZVISTA_PM
LOOP AT I_ZVISTA_PM INTO WA_ZVISTA_PM.
MOVE-CORRESPONDING WA_ZVISTA_PM TO WA_Z1VISTAPM.
CLEAR WA_EDIDD.
MOVE C_SEGNAM TO WA_EDIDD-SEGNAM.
MOVE WA_Z1VISTAPM TO WA_EDIDD-SDATA.
APPEND WA_EDIDD TO I_EDIDD.
CLEAR WA_ZVISTA_PM.
CLEAR WA_Z1VISTAPM.
ENDLOOP.
* Count the number of data segments
DESCRIBE TABLE I_EDIDD LINES V_NBSEG.
* If the number of data segments exceeds the maximum
* allowed number, then edit a message in the spool,
* then display an error message (quit the program)
IF V_NBSEG GT V_OCCMAX.
WRITE:/ TEXT-003, V_OCCMAX.
MESSAGE E751.
ENDIF.
* Call the IDoc creation function
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
    MASTER_IDOC_CONTROL = WA_EDIDC
TABLES
    COMMUNICATION_IDOC_CONTROL = I_EDIDC
    MASTER_IDOC_DATA = I_EDIDD
EXCEPTIONS
    ERROR_IN_IDOC_CONTROL = 1
    ERROR_WRITING_IDOC_STATUS = 2
    ERROR_IN_IDOC_DATA = 3
    SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
    OTHERS = 5.
* If there was an error, display a message (quit the
* program)
IF SY-SUBRC NE 0.
MESSAGE E746.
ENDIF.
ENDFORM.
regards
ravish
<b>plz dont forget to reward points if useful</b>

Read data from Excel file and diaplay in Webdynpro

Hi all,
I need some help. I have a Excel file with set of name, phonenumbers . I want to know how to display the data using Webdynpro. Could some one help me. help is appreciated and I promise to award points for right answer.
Thank you
Maruti

<b>Hi
i can explain you to read data from Excel file
First You have to download the jxl.jar file. You can get this file from the Below site
</b><a href="http://www.andykhan.com/jexcelapi/download.html">jexcelapi jar</a>
It will be in Compressed Fromat So Unzip it to get the Contents
After Unzipping The File You will get a Folder (jexcelapi/jxl.jar)
Now in NWDS open web dynpro explorer, Right Click Your Project, a popup menu will appear and in that click Properties
You will get window displaying your Project Properties
On Left Side of the window You Will Find "Java Build Path"
Click That "Java Build Path" and you will get 4 Tabs Showing ( Source,Projects,Libraries,Order and Export)
Click Libraries Tab
You will find options many options buttons
In that click the Button "Add External Jars"
You will get Window in order to fecth the jxl.jar file from the location you had stored
After selecting the jxl.jar i will get displayed and click ok
Now Open Navigator
Open Your Project
You will find Lib folder
Copy the jxl.jar to that lib folder
Note : You cannot Read the Content from the excel file directly
First You Have to copy that file to the Server,
And from the Server you can get the file absolute path
With the absolute path you can read the contents of the Excel file
You have to save the Excel file as .xls Format and Not as xlsx format i will not accept that...
You have Upload the Excel file from the Server Using the File Upload UI Element
This Coding will extract 3 columns from the Xls File
Coding
import java.io.File;
import java.io.FileOutputStream;
import java.io.InputStream;
import jxl.Cell;
import jxl.Sheet;
import jxl.Workbook;
import com.sap.fileupload.wdp.IPrivateFileUpload_View;
import com.sap.tc.webdynpro.services.sal.datatransport.api.IWDResource;
public void onActionUpload_File(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionUpload_File(ServerEvent)
    IPrivateFileUpload_View.IContextElement element1 = wdContext.currentContextElement();
    IWDResource resource = element1.getFileResource();
    element1.setFileName(resource.getResourceName());
    element1.setFileExtension(resource.getResourceType().getFileExtension());
    //@@end
public void onActionUpload_File_in_Server(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionUpload_File_in_Server(ServerEvent)
    InputStream text=null;
    int temp=0;
    try
         File file = new File(wdContext.currentContextElement().getFileResource().getResourceName().toString());
         FileOutputStream op = new FileOutputStream(file);
         if(wdContext.currentContextElement().getFileResource()!=null)
              text=wdContext.currentContextElement().getFileResource().read(false);
              while((temp=text.read())!=-1)
                   op.write(temp);
         op.flush();
         op.close();
         path = file.getAbsolutePath();
         wdComponentAPI.getMessageManager().reportSuccess(path);
    catch(Exception e)
         e.printStackTrace();
    //@@end
public void onActionUpload_Data_into_Table(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionUpload_Data_into_Table(ServerEvent)
    try
          Workbook wb =Workbook.getWorkbook(new File(path));
          Sheet sh = wb.getSheet(0);
          //wdComponentAPI.getMessageManager().reportSuccess("Columns = "+sh.getColumns());
          //wdComponentAPI.getMessageManager().reportSuccess("Rows = "+sh.getRows());
          int columns = sh.getColumns();
          int rows = sh.getRows();
          int i=0;
         for(int j=1;j<=rows;j++)
                   ele=wdContext.nodeTable_Data().createTable_DataElement();
                   Cell c1 = sh.getCell(i,j);
                  ele.setTab_Name(c1.getContents());
                   Cell c2 = sh.getCell(i+1,j);
                   ele.setTab_Degree(c2.getContents());
                      Cell c3 = sh.getCell(i+2,j);
                   ele.setTab_Percentage(c3.getContents());
                   wdContext.nodeTable_Data().addElement(ele);
    catch(Exception ex)
         wdComponentAPI.getMessageManager().reportSuccess(ex.toString());
    //@@end
   * The following code section can be used for any Java code that is
   * not to be visible to other controllers/views or that contains constructs
   * currently not supported directly by Web Dynpro (such as inner classes or
   * member variables etc.). </p>
   * Note: The content of this section is in no way managed/controlled
   * by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
String path;
IPrivateFileUpload_View.ITable_DataElement ele;
//@@end
Regards
Chandran S

How to read data from analog input and export it to a file using Components Works

I've made a simple application (Delphi 5 using the activeX) that read data from analog input channel 0. After I read the data, I want to export it to a file using the Components Works on a 6035E NIDAQ. (I'm not using labview and don't want to use it)
How can I do that???
Regards,
Francis

Here's a sample code to do this...
P.S.: If you read only one channel this code won't work.
function MyFunction: Integer;
var
Low, High, i, j, ChannelCount, RowCount: Integer;
Po: P;
begin
//you are reading multiple channel
ChannelCount := VarArrayHighBound(Buffer, 1);
RowCount := VarArrayHighBound(Buffer, 2);
for i := 0 to ChannelCount do begin
for j := 0 to RowCount do begin
WriteToDisk(Buffer[i, j]));
end;
end;
end;

Read data from Table at XI during Mapping

Hi experts
How we can pick data from one database table during Mapping, the table is at XI system.
when we are picking data from table at R/3, we are using RFC Function Module/ BPM, can we pick data from XI database table during mapping ?
what will be the steps to pick it ?
Please Help.
Regards,
Study SAP

hi Study Sap
You may use RFC lookup
kindly follow these links for RFC lookup
RFC Lookup.
Look ups.
/people/francesco.bersani/blog/2007/03/05/data-lookup-optimized
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
/people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Use this crazy piece for any RFC Mapping Lookups!
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
SAP XI Lookup API
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Lookups in XI made simpler
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
regards
Sandeep Sharma
PS if helpful kindly reward points

Reading data from Table type from Badi /sapapo/curto_create

Hi,
I have been trying to read data from badi /sapapo/curto_create . In this badi there is method CS_PPDS_RTO.
which has nested structure upto 8 level. I have been trying to read data but i am not suceesfull in reading data from the stsructre
which is present at lowest level.
The nested structure of the BEFORE_SAVE is following way.
BEFORE_SAVE-CS_PPDS_RTO-HIRARCHY-ADD_APPLICTN_DATA-MODES-BODY-CAP_REQS-RESUID.
I have to read the value of reusid bt i am not sure whow to read this value can you please help me by giving some Bapi or method
to read the value of Reusid .
Thanks

Hi!
DATA: lv_resuid TYPE resuid.
LOOP AT CS_PPDS_RTO-HIRARCHY-ADD_APPLICTN_DATA-MODES-BODY-CAP_REQS-RESUID
INTO lv_resuid.
ENDLOOP.

HOW TO READ DATA FROM A FILE AND INSERT INTO A TABLE USING UTL_FILE

Hi..
I have a file.I want to read the data from file and load it into a table using utl_file.
how can I do it?
Any reply apreciated...

Hi,
This is not your requirment but u can try this :
CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
GRANT READ ON DIRECTORY text_file TO fah;
GRANT WRITE ON DIRECTORY text_file TO fah;
DROP TABLE load_a;
CREATE TABLE load_a
(a1 varchar2(20),
a2 varchar2(200))
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY text_file
ACCESS PARAMETERS
(FIELDS TERMINATED BY ','
LOCATION ('data.txt')
select * from load_a;
CREATE TABLE A AS select * from load_a;
SELECT * FROM A
Regards
Faheem Latif

Need to read data from a jsp and insert in other jsp

Hi,
I have a jsp where i need to read from another jsp(which has data " header ---insert -----footer") and find a string "insert" in it and replace that string with a some value in the current jsp.
Thanx in Advance.
Sridhar.

I have a jsp
which needs to take headers and footers dynamically and insert them into my jsp.
currently what i am doing is, using a script to get these header and footer and using document.write
MYJSP.jsp looks this way
<script src="/../Headerfooter.jsp"/>
<script language="javascript">
document.write(header); -->defined in -> /HeaderFooter.jsp
document.write("<table>...</table>");
document.write(footer);-->defined in -> /HeaderFooter.jsp
</script>
/HeaderFooter.jsp looks this way
header = "<html>...<table width=\"100\">....";
footer ="....</html">
i dont want to use script bcoz i am getting problems in nestcape...

How to read data from multiple files and append in columns in one file

Hi Guys,
I have a problem in appending data from files in different columns. I have attachement has file A and B which I am reading and not able to get data as in file Result.txt. Please comment on how can I do this
Solved!
Go to Solution.
Attachments:
Write to file.vi ‏13 KB
A.txt.txt ‏1 KB
B.txt.txt ‏1 KB

You cannot append columns to an existing file. Since the data is arrange line-by-line as one long linear string in the file, you can only append rows. A new row needs to be interlaced into the original file, shifting everything else. If you want to append rows, you need to build the entire output structure in memory and then write all at once.
(I also don't think you need to set the file positions, it will be remembered from the last write operation.)
Unless the files are gigantic, here's what I would do:
(Also note that some of your rows have an extra tab at the end. If this is normal, you need a little bit more code to strop out empty columns. I include cleaned up files in the attachment. I also would not call them A.txt.txt etc. A plain A.txt is probably sufficient.)
EDIT: It seems Dennis's solution is similar )
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Write to fileMOD.zip ‏6 KB
MergeColumns.png ‏6 KB

Reading data from tables SXMSCLUP and SXMSCLUR

Similar Messages

Maybe you are looking for