Reading only customer or modal wage type from rt

Hi expertise,
I need youe help regarding reading only customer or modal wage type
from rt. in sap payroll.
Regards.
Priyaranjan

Hi,
Use these two function modules to get the wage type from Rt Table
FM 'CU_READ_RGDIR' -> to get the sequence number we use this function module .
FM 'PYXX_READ_PAYROLL_RESULT'
That sequence number is passed over here
regards
Arun VS

Similar Messages

Fields appear as "Read Only" in an Int.Form called from a WD

Hi Experts!
I am having a doubt in an Adobe Int.Form, that is called from a WD application.
The fields that are in my Form, always appear as a "read only". It is not possible to modify anything there.
Here, I describe the steps that I follow.
I create a very simple WD application. In its WD View, exist an unique Object (Adobe Interactive Form).
In that object, I set the properties:
"Data source": a context variable type "my structure". "My structure", is a simple structure with a couple or three fields, let´s say PERNR, BUKRS, WERKS... It is linked to the Form Interface (ABAP DICTIONARY-BASED INTERFACE). So in this way, the link between my WD and the AdobeInt.Form is working.
"PDF Source": a context variable type XSTRING.
"Template Source": here I have set my Int.Form. Currently, it only contains a couple of fields
"Enabled": True.
"Read Only": False.
In the AdobeForm, I have drag & droped those 2 or 3 fields, save it, and activate it. I guess nothing more is needed, for my test.
And at last, in the View´s method WDDOINIT, I am reading one of those fields, let´s say the employee number (PERNR), and I set by hardcoding its number (let´s say -> 00000001).
Until here, everything seems to work fine. When I launch the WD test, the Adobeform appears, at the moment, with only one of my fields (Employee - PERNR), and its value is filled in with '00000001'.
But now, I would like to write something by myself. And when I try to do it, it is not possible! Field PERNR, is displayed as a "READ ONLY".
Someone knows what is happening here? I guess it should be possible, to activate as a "EDITABLE" that field in my Form.
So here is my doubt.
Am I doing anything wrong? Or am I doing any mistake?
Thank you very much in advance!

Finally I think I have found the problem.
In the View where I am printing the ADOBEFORM, it is needed this code under the method WDDOMODIFYVIEW.
method WDDOMODIFYVIEW .
DATA: LV_INTERACTIVE_FORM   TYPE REF TO CL_WD_INTERACTIVE_FORM,
             LV_METHOD_HANDLER     TYPE REF TO IF_WD_IACTIVE_FORM_METHOD_HNDL.
LV_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT( 'INT_FORM' ). "   adobeform object in view
IF LV_INTERACTIVE_FORM IS NOT INITIAL.
      LV_METHOD_HANDLER ?= LV_INTERACTIVE_FORM->_METHOD_HANDLER.
      LV_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( ABAP_TRUE ).
      LV_METHOD_HANDLER->SET_HIDE_NAVIGATION_PANEL( ABAP_TRUE ).
      LV_METHOD_HANDLER->SET_DISABLE_PRINT_BUTTON( ABAP_TRUE ).
      WD_THIS->M_METHOD_HANDLER ?= LV_INTERACTIVE_FORM->_METHOD_HANDLER.
      WD_THIS->M_METHOD_HANDLER->SET_HIDE_TOOLBARS( ABAP_TRUE ).
    ENDIF.
endmethod.
Regards,
Carles

Why no Read Only / Edit prompt when opening document from a hyperlink (link)?

I have a page that I've added hyperlinks to that point to documents in a document library.
If I click on a link to an Excel file, it doesn't give me the Read Only / Edit option. Instead, I get Open/Save/Cancel, and if I open it, I can't save it to the doc library, because it's
opened as Read Only.
On the same page, I have a link to a Word file to the SAME doc library. I still only get Open/Save/Cancel, but I can save - and it can overwrite the existing file on SharePoint. This is not ideal, but works.
What I'd like is to be able to link to a document from anywhere and have it open the Read Only / Edit prompt.
I've read elsewhere that this is a client issue, but I can't find the resolution.

Hi Ben,
Try this:
Quit all Office programs that are running.
Click
Start, click
Run, type regedit in the
Open box, and then click
OK.
Locate and then right-click the following registry subkey:
HKEY_CURRENT_USER\Software\Microsoft\Office\<version_number>\Common\Internet
Note In this subkey, <version_number> corresponds to 10-15 for the specific Office version that is installed.
Point to
New, and then click
DWORD Value.
Type OpenDocumentsReadWriteWhileBrowsing, and then press ENTER.
Right-click
OpenDocumentsReadWriteWhileBrowsing, and then click
Modify.
In the
Value data box, type 1, and then click
OK.
On the
File menu, click
Exit to quit Registry Editor.
It will force to open all office files from Internet in Edit mode

Read Only Access while assigning Analysis Types and Reports in User/Group

Hi Team,
While Assigning Analysis Type,Reports and Workbooks to User "Read" option is not enabled. It is not working and as soon as we select analysis type ,Only one option is editable "Create/Update/Delete". The other two Option is always there as display "Read" and "Execute" . Execute might work with "Scripts template" but "READ" should work for analysis types and Reports.
We are already struggling with "Read Only" Access in security filter as its not working now.
Thanks
Edited by: user7918731 on Mar 2, 2011 11:22 AM

The behavior for Analysis type, workbook and script as follow:-
The Analysis type create/update/delete option will be enabled, read and execute option will be disabled by default.
The report workbook read option will be enabled, and other two options will be disabled.
The script execute option will be enabled, and other two option’s will be disabled.
For providing “Read Only” access in security filter, Switch to the administration tab, Click on Security Filters, Click on Add button, Open Create Security Filter window, Select the access level to Read Only and select user in assigned user , Click on ok.
It should work.

Copy wage type from one country grouping to another

Hi,
How can I copy a wage type on transaction PU30 from one country grouping to another, where wage type group is 00TR (Trip costs)? I need this copy for Finland, because it doesn't have this wage type group.
Thanks.
Sónia

Hi Sonia,
we are facing a similar issue. Kindly let us know how you were able to copy the wage type group 00tr and also the model wage types for travel expenses.
would appreciate your immediate reply.
thanks & regards
rao

Read only custom field for particular user

Hi,
I have requirement to few enterprise custom field should be edited by only top management,Project manager and team member can only read the same field.
Like i have one custom enterprise baseline finish date,which need to update by only IT GM,and other staff can see only as read mode.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hasan,
You have few options, based on the route you want to take"
1) You could control the "Visbility" of the fields, via using a feature like
Target Audiences .
However,this may not control the same custom field on the page based on user permissions.
2) Use JavaScript: https://badalratra.wordpress.com/2013/05/04/how-to-disable-pdp-custom-fields-using-javascript/
3) Jquery: http://epmainc.com/blog/locking-custom-fields-pdp-project-server-2013-using-jquery
4) Customization: https://epmxperts.wordpress.com/2014/01/20/secure-pdp-pages-as-per-project-server-security/
5) You could look into a third part product, by Fluent Pro: https://help.fluentpro.com/pdp_manager/start
I realize these may not be exactly what you need, but with some effort, I am sure you could modify the code and reuse.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

How to read only files with a certain format from folder with java

I have this folder on the server and I only want to read files from this folder on the server... I only want to read files with the files format starting with error_ and ending with xml... an example of a file would be..
error_123.xml
I want something like this
if(fileName.startsWith("error_") && fileName.endsWith(".xml")){
but which java package will I have to use to read the file from the directory...

Create an implementation of the java.io.FilenameFilter interface to match the pattern you need.
Create a java.io.File object for the folder.
Use the File.listFiles(FilenameFilter) method to get an array of File objects for the files in the folder that match the pattern.
For each file in the array, create a FileInputStream, wrap it in an InputStreamReader, and wrap that in a BufferedReader (assuming you want to read the XML files as character streams).

List of wage types not processed in payroll

Dear ABAPERS,
I am developing a report which will show all wage types from infotypes 14 and 15 which are still not processed in payroll due to the reason that the payroll of some employees was not processed since they were locked in infotype 3.
One solution is to read payroll cluster and compare wage types from infotype 14, 15 with wage types in payroll cluster. Is there any solution other than this ???
Thanks,
Waqas Rashid

Hello,
Check the Payroll Log, Search by P0014, check the input and output whether IT 14 record exists and moved to IT table, if it so then next check why it is not added to RT. If it is not there in P0014 input table then check your IT 14 entry whether date and other entries are correct.
With Regards,
S.Karthik

Pcr To Get The Wage Type Value From Previous Years Master Data Records

Hi
I have an issue related to pcr. I want to get the value of a wage type from previous year and it has to be added to another wage type. Tried to write pcr by using the operation TABLE. But i am not able to get the previous years data. Request to help in writing the PCR for the issue.
Thanks
EKP Yadav

1 - Create an "Information WT" that will be saved into RT but that has no impact on net pay.
2 - Create a PCR that will be activated on the last pay of the year to read the WT you want and transfer it's information into your Information WT.
3 - Create a PCR that will read the last payroll results (activated with function PLRT) and transfer into the Input Table (IT) the Information WT.

"read from measurement file" reads only first line of data

Hello,
I have a problem when trying to read a .lvm file through "Read from Measurements file" with the following block diagram
Problem: it reads only the first line of data from what I can see in the probe window,.
A part of the lvm file for reference.
I haven't used Labview in a long long time, I'm trying to figure out what I am doing wrong.
Thanks

Sorry meant to attach the lvm. Here it is. (Actually I had to put it in .txt because the forum wont let me upload a lvm file)
I unfortunately cannot share the full vi that record the data as I am not its owner/creator. I'll try to give as much info as I can with the relevant pictures attached, I hope it allows us to at least have an hint of where the problem might be.
(this is in a while loop)
In the stacked sequence, the other pannels are similar to the one shown here: value read fron a variable, converted to dynamic and a signal attribute is set. The "start recording" control operation is "switch when pressed".
Here are the properties of the set signal attributes
And here are the properties of the "write to measurement file"
Attachments:
NoTarget_full circle__Rx_-10-SAMPLE.txt ‏60 KB

Create Wage Type in Infotype 0008 for Myanmar

Dear Experts,
I am trying to create wage types in Infotype 0008 for Myanmar, which is not one of the countries where SAP payroll is being delivered. I am not trying to run payroll, but only to create the wage type so that I can maintain the salary information in Infotype 0008. I have done much searches prior to doing this post and found that there are several other posts which are similar to mine. However, as I could not get the answer that I needed, I am posting again here.
I have gathered that for ECC 6.0, it is not possible to copy wage types between country groupings. The advice that I had seen from other posts are:
1. There are many countries where the wage types are not delivered.
2. For country groupings where there are no SAP-defined wage type models, you have to create wage types from scratch in T512W using MOLGA 99 wage types as reference.
3. The wage type groups should then be created for the country grouping in T52D5.
4. Wage types are then assigned to these wage type groups in V_T52D7 of T52D7.
5. You may also need to update the wage types in tables T511B, T512Z, T512J.
My questions are:
a. How should I perform Step 2 as mentioned above? Specifically, how to I maintain table T512W?
What I had done was to go to t-code OH11, select "Copy", select country grouping as "99" and selected wage type M020. Then I typed the customer wage type number as 1000 and also entered the wage type long text (as shown below). M020 was successfully copied to wage type 1000 in country grouping 99. However, how should I continue from here to copy this wage type 1000 to country grouping Myanmar?
b. How can I maintain T52D5 as mentioned in Step 3?
c. I have not been able to try for Steps 4 and 5 since I was not able to start with Steps 2 & 3. I will ask again when I have managed to do Steps 2 & 3.
Very much appreciate all advice and suggestions to the above.....

you can try through fast entry screen and update the amount in infotype.

SQL Server 2005 replaced with SQL Server 2014 trying to connect front end Access as guest (read only ODBC)

We have replaced a SQL Server 2005 with a SQL Server 2014 (new physical server.) Have the new server set up to use SQL Server login OR Windows user login. Had old server connecting (for a particular DB) to front end Access (2010 or 2013) as guest for
anyone logged into the Windows NT Network with a read only ODBC connection. Have the DB in the new server set to include guest as db_datareader (with only SELECT permission for the securables of each table and view being linked) but when any Windows user not
specifically listed as a SQL DB user tries to use the front end they get an error of:
Microsoft SQL Server Login
Connection failed:
SQL State: '28000'
SQL Server Error: 18456
[Microsoft][OCBC SQL Server Driver][SQL Server] Login failed for user {domain\user}.
After closing that pop-up window a server login window appears. Of course, since the guest user is not specifically listed as a user in the DB that fails also. It seems like there should be a very simple solution to this, but I can't seem to find it. I want
to allow anyone logged in on the Windows system (locally) to be able to open the MS Access file (on their work station machine) and run their own (read only; select) queries on the SQL Server database. Any suggestions?
Thanks a billion in advance ----

Thanks for the response Olaf. I have now spent weeks researching this. I realize that using the guest account in most situations is not advised. As mentioned, I have restricted the guest account to allow the db_datareader role only, and have explicitly denied
all other roles, as well as allowing select only, and still have no access for the guest account.
The suggested fix in the second link you provided, of using Windows groups is not plausible for my situation either. We are a scientific field research institution, with a few long term users and lots of users that may have Windows accounts for a few months,
and then they are gone. It would be a nightmare for the network tech to try to keep a group account up to date, and we need to give access (read only, of course) to anyone logged into the system. Realize that the ONLY access of any kind to this database is
thru MS Access ACCDB, using a (by default) read only OCDB connection.
This type of access is used particularly because researchers need to be able to set up their own queries, and the MS Access query interface is particularly convenient for people who are not themselves SQL experts, yet are trying to get some very advanced
levels of output. Putting the database online is not practical because then we are back to the need for a comprehensive query interface, and just picking up general subsets of the data online (from a basic web page search feature) would be out of the question,
since the result set would involve hundreds of thousands if not millions of records.
So - that said - what exactly would you suggest, assuming we don't have the funds to buy a whole new system, and have spent plenty of money with Microsoft's Enterprise level MS Office so that all work stations have MS Access, and Microsoft's SQL Server,
as well as running our network on Microsoft's network software.

UIX: How to add linked view table columns to the Read-only table

Hi
I have two tables
T1: ID, STAFF_ID, NOTE
T2: STAFF_ID, USERNAME
I have created corresponding entity objects (E1, E2), views (V1, V2), association A(E1->E2 as *..1 using STAFF_ID) and viewlink VL(V1->V2 as *..1 using association A).
My model in AppModule looks like
V1
----V2 via VL
Now I have single UIX page in which I drop V1 as Read-only table. The table displays columns correctly: ID, STAFF_ID, NOTE
What I want is to add a column STAFF_ID from the V2 into this table. I have tried to drop it into the table but when the page is run it does not display anything in that column. It has to do something with binding.
I have done similar test with dropping V1 as read-only FORM and then added STAFF_ID from V2 as messageTextInput and everything is rendered correctly.
Anyone knows how to do the same thing but with table?

Yes that is true but I would like to give another example where this may not apply.
Say I have 3 tables
CLIENT(INDIVIDUAL_ID,...)
ADDRESS(ADDRESS_ID,...)
ADDRESS_HISTORY(ADDRESS_ID, INDIVIDUAL_ID,BEST_ADDRESS)
where ADDRESS_HISTORY is intersection table in CLIENT to ADDRESS many to many relationship.
Suppose I have VO2 that consists of ADDRESS and ADDRESS_HISTORY entities (corresponding association exists) and user needs to add new address for the selected customer in VO1 (made from CLIENT entity). There are several issues here:
1) An input form made out of VO2 must contain an entry for BEST_ADDRESS flag but since it will be read-only, seems that this approach may not work. However, I found a post re:Updating view objects with multiple entities that provides workaround this.
2) In that case assume that I use DBSequence to automatically add ADDRESS_ID when user inputs new record in this input form. I am using DB Trigger on ADDRESS table and have selected ADDRESS_ID in ADDRESS entity as DBSequence. Now observe that VO2 would contain another ADDRESS_ID from ADDRESS_HISTORY entity which has to be automatically populated with the same value. How?
In a nutshell my question relates to the problem how to automatically populate intersection table when new record is added to the detail. But the trick is that some attributes of the intersection table must be inserted by the user in the form..
Please advise

Creation of a new Wage type(80XX)

Hi,
I need to create an absence type which will be paid using a new wage type.
Actually,I want to create this new wage type by copying one of the existing wage types used for absences.
But I am not able to find the existing wage types(ones used for the payment of the absence types) in any of the tables(i have checked all the tables T512w etc).
This new wage type should be exactly same in nature as the existing wage types for absences.
Can anyone please help me with this.
For correct reply,Points assured........
thanks
sushil

Hi Suresh,
Thanks for your help.
Actually,we have different types of absences like Paid absences(authorised absence,jury absence etc) and each absence is paid using a different wage type.
For e.g:If an employee goes on an authorised absence,he will be paid using Wage type 8021 for that day.
So,basically I want to know how do I copy the above mentioned wage type(8021) to create a new wage type for a new absence.
I am not able to figure out the exact place where I can find these wage types and copy them.
I have checked in PU30,PU95,however,in PU98 I could see the wage type as not assigned to any wage type group.
So,please suggest how do I copy the wage type from there.

Sharing a view in read only mode

Hi,
I am new in this domain. I have made an application in which I made two local development projects. Through that I am using views of one into another with the help of "Used WebDynpro Components" concept. After deploying, I have got these two views.
But the problem is that I want that view in read only mode which I have taken from other local development project and this view was not in read only mode in its local development projects.
Please provide me the solution in detail so that I can understand easily.

Hi Manish,
Say View1 is the view in main Component,View2 is the view in used Component. Exactly follow these steps.
Create a context attribute enable of type String in used Component's controller,used Component's Interface controller, View1 and View2.
Using context mapping map these attributes View2 -> used Component's controller-> used Component's Interface controller -> View1 ( if you don't know how to map double click the the Main component: Data navigation modeler is opened; In the diagram, right side select small arrow first select View1 drag to used Component's Interface controller,in the wizard select right hand side enable attribute drag to left side)
you can map similarly View2 -> used Component's controller-> used Component's Interface controller.
In View2 create another variable edit of boolean type.
Open Layout tab of View2, bind this attribute to enable property of all the UI elements which you want to disable.
In implementation tab of View1 in method wdDoInit() write this code
wdContext.currentContextElement.setEnable("display");
In implementation tab of View2 in method wdDoInit() write this code
if(wdContext.currentContextElement.getEnable().equalIgnoreCase("display"))
wdContext.currentContextElement.setEdit(false);
else
wdContext.currentContextElement.setEdit(true);
Hope this helps for you.
Best regards,
Siva
Message was edited by:
Armin Reichert

Reading only customer or modal wage type from rt

Similar Messages

Maybe you are looking for