Receive an error when closing my program built using LabVIEW applicatio​n builder

When I close my program built using LabVIEW application builder I receive an application error,"The instruction at "0x77fcb1ad" referenced memory at "0x023a0010". The memory could not be "read". Click OK to terminate the program"
I have no idea why this is happening.

This is most likely due to a reference or similar left open. You will experience this if you leave an image undisposed in IMAQ as well.
Check all of your references and be sure you are cleaning everything up.

Similar Messages

  • Receiving an error when trying to commit files using subversion in Dreamweaver: file or directory is out of date

    I'm trying to use subversion in dreamweaver. I've followed the setup steps and tested the connection to the svn repository. All good. I've even updated some files before successfully. Now, I'm trying to commit changes made in my local working copy of several files to SVN. I'm receiving Error#160024: Commit Failed. File or directory <subject file name> is out of date; try updating resource out of date" I've tried right click->version control->update. Then commit again. Same error. Any help?

    Hi rmcproperties,
    Found a discussion thread that could help you http://stackoverflow.com/questions/87950/how-do-you-overcome-the-svn-out-of-date-error
    Thanks,
    Preran

  • WLST - error when i start managed server using nmstart() command.

    i am receiving an error when start the managed server using nmstart(). Please advise.
    Do I have add any parameter to nodemanager.properties file?
    Thankyou
    pasted below is the error message i am receiving when i start managed server.
    Starting server hssclient ...This Exception occured at Thu Mar 19 10:30:02 EDT 2
    009.
    java.lang.IllegalArgumentException: Invalid host name: Null or empty
    at weblogic.nodemanager.client.NMClient.checkNullOrEmpty(NMClient.java:7
    2)
    at weblogic.nodemanager.client.NMClient.setHost(NMClient.java:79)
    at weblogic.nodemanager.mbean.NodeManagerRuntime.getNMClient(NodeManager
    Runtime.java:527)
    at weblogic.nodemanager.mbean.NodeManagerRuntime.getNMClient(NodeManager
    Runtime.java:565)
    at weblogic.nodemanager.mbean.NodeManagerRuntime.start(NodeManagerRuntim
    e.java:188)
    at weblogic.server.ServerLifeCycleRuntime.startServer(ServerLifeCycleRun
    time.java:439)
    at weblogic.server.ServerLifeCycleRuntime.start(ServerLifeCycleRuntime.j
    ava:124)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean
    .java:428)
    at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImp
    l.java:213)
    at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultM
    BeanServerInterceptor.java:815)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784
    at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBea
    nServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:248)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.
    run(WLSMBeanServerInterceptorBase.java:443)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.inv
    oke(WLSMBeanServerInterceptorBase.java:441)
    at weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterce
    ptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:63)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.
    run(WLSMBeanServerInterceptorBase.java:443)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.inv
    oke(WLSMBeanServerInterceptorBase.java:441)
    at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(
    SecurityInterceptor.java:426)
    at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
    ptor$10$1.run(AuthenticatedSubjectInterceptor.java:582)
    at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
    ptor$10.run(AuthenticatedSubjectInterceptor.java:580)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
    dSubject.java:363)
    at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
    ptor.invoke(AuthenticatedSubjectInterceptor.java:573)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanSer
    ver.java:310)
    at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnecti
    onImpl.java:1410)
    at javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectio
    nImpl.java:81)
    at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run
    (RMIConnectionImpl.java:1247)
    at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(R
    MIConnectionImpl.java:1350)
    at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImp
    l.java:784)
    at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown S
    ource)
    at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:553)
    at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:443)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
    dSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
    147)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
    a:439)
    at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:6
    1)
    at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicSer
    verRef.java:983)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)

    Hi I am getting below exception, is nmStart only start AdminServer ????
    There are 1 nested errors:
    weblogic.management.ManagementException: Booting as admin server, but servername, MS1, does not match the admin server name, AdminServer
    at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:67)
    at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
    at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
    at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:803)
    at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:493)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
    at weblogic.Server.main(Server.java:67)
    >
    <Feb 10, 2010 1:45:17 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Feb 10, 2010 1:45:17 PM UTC> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Feb 10, 2010 1:45:17 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    <Feb 10, 2010 1:45:17 PM> <FINEST> <NodeManager> <Waiting for the process to die: 8275>
    <Feb 10, 2010 1:45:17 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
    <Feb 10, 2010 1:45:17 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
    ~

  • Procurement Coordinator received Authorization Error when creating Bid Inv

    Hi All,
            In SRM I have an issue Please help me in solving this. Please see below
                  Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit.  Message states u201CMissing Transaction BBP_BID_EXTSOu201D; however Bid # is still created. User requests that Authorization issue is resolved and Bid # appear for Procurement Coordinators.  This problem does not happen for Commodity Managers

    Hi
    Please do the following steps.
    When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
    ALso pls check the foll:
    -->activate the services through SICF tcode.
    > Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
    >Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
    Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
    Could you please review again the following steps ?
    Did you check that ICM was working correctly (TA SMICM) ?
    1-Activate the necessary ICF services
    With transaction SICF and locate the
    services by path
    /sap/public/bc/its/mimes
    /sap/bc/gui/sap/its/webgui
    2- Publish the IAC Services
    With Transaction SE80 locate from
    the menu Utilities -> Settings ->
    Internet Transaction Server (Tab) ->
    Publish (Tab) and set “On Selected
    Site” = INTERNAL.
    3- Locate the Internet Services SYSTEM and WEBGUI.
    Publish these services with the Context
    Menu -> Publish -> Complete Service
    4- Browse to http://<server>:<icmport>/sap/bc/gui/
    sap/its/webgui/! and login to the
    webgui.
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • Every time I try to export or publish my project it result in a error and closing de program, any idea ???

    Every time I try to export or publish my project it result in a error and closing de program, any idea ???

    Hi,
    That link takes you to the Facebook for iPhone app.
    You have posted in the Mac App Store for Mac OS X. (I know it's somewhat confusing especially with the new forum format).
    Try deleting the Facebook app from the iPhone by pressing down on the app on the iPhone until it jiggles then tap the circle with an x in it. Then tap the Home button to stop all the apps from jiggling.
    Now tap the App Store icon and and re download the Facebook app again.
    If that doesn't make a difference, post over in the iPhone Discussions forum at this link.
    https://discussions.apple.com/community/iphone/using_iphone
    Carolyn 

  • TS3833 I am receiving this error when syncing my ipod: iTunes could not copy "song name" to the iPod "name" because an unknown error occurred (-50).  I am using iTunes version 10.6.3.25. Why?

    I am receiving this error when syncing my ipod: iTunes could not copy "song name" to the iPod "name" because an unknown error occurred (-50).  I am using iTunes version 10.6.3.25. Why?

    Right click the filename that won't download and selsct 'Get Info'. Look at the file path, does it have a //?// in it? That is a problem with Amazon downloads that prevent iTunes from finding the file. Use 'Add Folder' to add the album to your library and try syncing it again

  • Error when Generating the Program

    Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
    "Error when generating the program" Message no. /SAPAPO/TSM141
    Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
    Possible causes:
    1. The template has been corrupted
    2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
    This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
    Anyone encountered this error message and any possible solutions to this issue.
    Thanks
    Surender

    I did find an ABAP Dump when looking at ST22.  The short message is as follows:
    Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
    Date and Time          05/14/2007 19:33:54
    Short text
         Jump distance is too large and cannot be generated.
    What happened?
         A jump distance is too large and cannot be generated.
         A control structure or a routine with "CHECK" or "EXIT" contains
         too many ABAP statements.
         Error in the ABAP Application Program
         The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
          because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
          determined that
         within an ABAP event a control structure (for example, IF..ENDIF
         or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
         become too large. The resulting jump distance is too large so that
        it could no longer be generated.
        With the internal load format, the jump distance must not be
        greater than 32768 (this is the size of approximately 10.000
        ABAP statements).
        The jump distance that is to be generated, however, is 50885.
    How to correct the error
       The ABAP application program must be changed.

  • Mass processing - Error when processing Java programs / VMC out of memory

    When running a mass update background process that updates the status of a service order in CRM the job fails due to error 'Error when processing Java programs'. I checked the VMC (SM52) and noticed that there is an error about the VMC running out of memory.
    The background program can either be a PPF Action or a Z-ABAP program that performs the update. Both programs are performing a CRM_ORDER_INITIALIZE but it seems that the VMC is not releasing the memory fast enough.
    Is there anyway we can force the VMC to release the memory after processing of each individual order?
    Thanks!

    I got  similar issue and it got resolved by useing CRM_ORDER_INITILAIZE. Initalization should happen after every Order processing and see that only one header guid is passed to the the FM. May not be good option ,but just try by putting wait for 5secs after CRM_ORDER_INITILAIZE.

  • Receiving an error when trying to remove P00 Security role from the user

    Hi All,
    I am receiving an error when trying to remove P00 Security role from the user.
    After logging on to GRC CUP, clicking on u201CCreate requestu201D, and filling out required information,
    I click on Select Roles/Groups
    On the next screen,
    I click on Existing Roles/Groups
    ERROR MESSAGE appears X Action failed and no roles appear in the box to select for removal.
    Regards,
    Vineet

    Hi Vineet,
    My be your selection is incorrect
    Try this
    in Applicaiton Area -- Select ALL
    Functional Area  -
    Select ALL
    Company           -
    Select ALL
    Role/Profile/Group Names --- Give p00* and execute the report
    if you give only p00 it wont give any result
    Hope this helps
    Thank you,
    Kishore

  • Error when generating update program

    Hi,
    I was loading transactional data in to Cube. The load had failed and in RSMO status tab is showing that Error when generating update program. could you please suggest me some one how to resolve it.
    regards,
    Neeraja
    null

    Hi,
    Actually when you are loading data, the update program is executed. It is generated while you create the update rules for your data target. Please check whether the update rules are active or just go to the update rules and activate it again. Try loading data after activation and let us know the results.
    With Regards

  • Error when closing Workbench

    We're getting an error when closing workbench -- below is information from the log:
    !MESSAGE Bundle update@plugins/org.eclipse.emf.compare.diff_0.8.0.v200806180301.jar was not resolved.
    !MESSAGE Missing required bundle org.eclipse.emf.compare.match_0.0.0.
    Does anyone know why we would be getting this error?
    Thanks,
    Janis

    Could I know which version of Workbench you are using? Was it installed as a
    standalone or an Eclipse plugin? Any other plugins you have installed?
    Regards,
    Long Liu
    2011/3/26 Janis Wolf-Pittel <[email protected]>
    >
    We're getting an error when closing workbench -- below is information from
    the log:
    >
    !MESSAGE Bundle update@plugins/org.eclipse.emf.compare.diff_0.8.0.v200806180301.jar
    was not resolved.
    !MESSAGE Missing required bundle org.eclipse.emf.compare.match_0.0.0.
    >
    Does anyone know why we would be getting this error?
    >
    Thanks,
    Janis
    >

  • Error when closing down (NetworkUXBroker.exe)

    I get this error when closing down Win 10. Just to let you know...
    NetworkUXBroker.exe
    The instruction at 0x00007FFDA03BB070 referenced memory at 0x000000CA1AD04F0

    Error message when closing down computer
    Ainslie Collison - 09:03pm Sep 12, 2008 Pacific
    Adobe photoshop downloader boot will not shut down automatically when I close down the computer. What settings can I change. I cannot find anything to help in edit/preferences. I have the starter edition.

  • Error when closing Service Call

    Error message is occuring when trying to close / update a service call.
    'No related record found [Service Calls - Contact Person] [Message 60156-18]
    and
    'Removing activites from service call not allowed'
    Some history to the BP which may be linked
    1 business partner was created
    2 service messages and activities where created
    3.  Bp was accidently deleted
    4.  BP was reinstated
    5.  Old service messages have error when closing
    Any solutions on how to update the service call - so it can be closed?

    Hello Lisa,
    I have came across this issue before. I suggest that a messaged be logged with the SAP Support Team. They may need to get a copy of the database to verify this.
    Regards,
    Lorna Real

  • Received the error when updating to inDesign 2014 "Unable to extract to temp directory."  c

    Received the error when updating to inDesign 2014 "Unable to extract to temp directory."  Anyone have a fix for this?

    Tjshannonhigg you will want to ensure that the User account you are logged into has proper access to the temp directory and that there is sufficient disk space available.

  • I received an error when trying to open itunes

    I received an error when trying to open itunes.  It said itunes stopped working, so I tried to uninstall and re-install.  It let me install it, but when I tried to open it, it gave me the same error message.  How can I get itunes back on my laptop (windows).

    Perhaps is post what the error is someone might be able to offer assistance.
    Also, have you had a look here  >  http://www.apple.com/support/itunes/troubleshooting/

Maybe you are looking for