Receive message when downloading ITunes or Safari for Windows 7 64 Bit. "Installation package could not be opened. Verify package exists or contact application vendor to verify this is a valid Windows Installer package."
Received message when trying to install Itunes or Safari for Windows. " Installation package could not be opened. Verify package exists or contact application vendor to verify this is a valid Windows Installer package".
I to am having the same issue. I have a admin account and logged into it as well and still have the same message pop up. Contacted live support the woman i spoke with had to send it up higher. We went through every thing including her trying (taking over as a host on my laptop) still have not bee contacted this June will be a year that i have heard nothing from them sine She di everything she could and pushed it up higher.
Similar Messages
-
Error messages when downloading Itunes 10.5. HELP PLEASE!!!
I keep getting two different error messages when downloading Itunes, first one says: An error occured during the installation of assembly "Microsoft.VC80.CRT,type="win32",version="8.0.507276195".publicKeyToken="1fc8b9 a1e18e3b",processorArchitecture="x86". Please refer to Help and Support for more information. HRESULT : 0x80070002.
The second said: Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficiant priviledges to start system services.
Does anyone know how I can fix these so I can download the Itune 10.5!!!!I have the same issue and a lot of people using Windows 7 64 bits too
-
I get an error message when downloading ITunes "could not access the network location" %public%\desktop\?
windows vista 32 bitTry the following user tip:
"Could not access network location %PUBLIC%\Desktop\" install errors -
I am having trouble downloading Itune, icloud etc onto my Windows 7 PC and keep getting the following error message "this installation pack could not be opened, verify that the package exists and that you can access it"
tried downloading the quicktime installer, I get the same message with it too
-
Error message when trying to install iTunes on my Pc:
Using Windows 7, had to replace hard drive. HELP!!
This installation package could not be
opened. Verify that the package exists
and that you can access it, or contact
the application vendor to verify that
this is a valid Windows installer packageHello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
when i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. PLEASE HELP
Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D. -
Please help
I am trying to download itunes on windows 7 32 bit, everytime I go to open download it comes up with a green screen then a error message.
This installation package could not be opened. Verify that the package exist.
Please help MeHi gump68,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful if iTunes is not installing on your PC:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
All the best,
Jeremy -
I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it. Any ideas?
Hello tcampbell1549,
Thank you for using Apple Support Communities.
For more information, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Have a nice day,
Mario -
I have received this error message when trying to send a comment to a blog : ERROR: Could not read CAPTCHA cookie. Make sure you have cookies enabled and not blocking in your web browser settings. Or another plugin is conflicting. See plugin FAQ., can any...
Only found one question similar and NO ANSWER to it.Same problem here...nothing in my settings have changed since the upgrade and I've checked my cookie settings and they allow 3rd party cookies. What's up Mozilla? I've been faithful to you for years and you let me down now?
-
Ever time I try to download itune on my new packard bell I get the message "this instillation package could not be opened. verify that the package existsmand that you can access it or contact the application vendor to verify that this is a valid windows installed package" PLEEEEASE someone help me as I've lost all of my music!
tried downloading the quicktime installer, I get the same message with it too
-
Error Message when i try to restore my iPhone: The iPhone "iPhone" could not be restored. This device isn't eligible for the requested build. HELP PLEASE!!!!
My Ipad and Iphone 3gs is both have issues too! I'm ready to give up! lol HELP ANYONE......
-
While trying to download Itunes on my lenovo laptop it tells me in an error box the following : " this installation package could not be opened verify that it exsist or contact the vendor for more info" what did i do?
Perhaps the answer provided for this problem in Microsoft's forums will help.
Good luck. -
whem installing itunes on my mums new computer which is windows 7 i get this message everytime "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"
Let's check your Windows system.
1. Have you done all the important windows updates and service Packs on your system. If not do it now. START button, type in Windows Update and ENTER. Select 'CHECK FOR UPDATES'
2. Let's check your Windows system files for possible file corruption
SCAN and repair possible Windows system file corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
3. Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally. -
Everytime I try to download iTunes I get this error message saying, "This Installation package could not be opened. Verify that the package exists and that you can access it.or contact the vendor to verify that this is a valid windows Installer package.
I had this same issue occur today during update, searched and finally tracked to problem with windows registry. Used online version of windows registry tool "Fix It" (can also download portable version for offline check. I selected Apple updater utility from list to fix and it did it's thing. Returned to my downloaded 10 iTunes adn isntalled perfectly fine.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Good luck. Worked for me back up and running. -
When I try to install iTunes onto my new computer, it says "This installation package could not be opened. Verify that this package exists and that you can access it or contact the application vendor to verify to verify that this is a valid Windows Installer package." I can save iTunes onto my computer, but when I click run, this is the message that appears. How do I get this thing installed?
Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D.
Maybe you are looking for
-
Hi All, I have the same issue as mentioned in the thread ALV - Top of Page Error Please let me know the solution Thanks Bala Duvvuri Moderator message: please describe the problem in your own thread, do not have people clicking on links first. Edited
-
I just came a across the serial number of my ipod that was stolen at the end of last year and am hoping to figure out what itunes account it is synched to now (or if I can for that matter). Any advice helps!
-
hi, I posted this unfortunately in a thread which has been marked as "solved". Therefore a new try: I-sight worked properly with os 10.4.6. I think the update 10.4.7 has killed some parts of the driver for the camera (all other firewire devices work
-
I'm trying to find a clock radio that is compatible with the Ipod Nano (the one I found said it was compatible with the mini, gen2,3,&4)-Does the Nano fit one of these categories? What is the purpose of the docking adapter that came in the box? If yo
-
I have a DVT camera running inspections and a Laptop running Framework 2.6.1, I have the ActiveX Controls version 1.2.2 and I can communicate with Visual Basic 6.0 but not with LabVIEW 7.0. I am using an Automation Refnum pointing to the DVT SID and