Receiver Determination: Contextobject to choose when BPM sendcontext

Hi everybody,
I set the send context in BPM on a send step. I want to use the condition editor in receiver determination.
Which contextObject is to choose in the condition?
There are so many. I searched the help and found nothing suitable.
Thanks
Regards
Mario

Try Out Path In receiver Determination Expand the Source structure ...And Select the Appropriate Field on which You want to place the condition..
If you want to use Context Object You need to create It In Integration Repository based out of message Interface and then Use it over here.
Hope This Helps
BR
Sainath
Edited by: Sainath Chutke on Jan 23, 2009 1:44 PM

Similar Messages

  • Configuring receiver determination with multiple messages in BPM

    I am configuring a BPM scenario which uses 3 abstract interfaces, one for receiving, 2 for sending. I need 2 abstract interfaces while sending because they use different message types. I have created a Receiver Determination for the 1st interface, but the problem is that when I try to create the second Receiver Determination the 2nd abstract interface is not listed after I select the Integration Process. Just the 1st interface is listed under the Integration Process. What might be the problem?

    Did you try to delete and reimport the BPM with the same name ?
    SKM

  • Receiver determination in BPM ..what is used for?

    Hi everyone.
    I've never used 'receiver determination' step in a BPM. I want to know what is used for.
    Regards,
    Inigo.

    you can ref: this link to find example where a receiver determination step is used in BPM- http://help.sap.com/saphelp_nw04/helpdata/en/43/6211b11c895f6ce10000000a1553f6/content.htm
    More abt RD step in BPM - http://help.sap.com/saphelp_nw04/helpdata/en/14/d5283fd0ca8443e10000000a114084/content.htm

  • BPM - Do we need receiver determination step between trans and sync send?

    Hi Gurus,
    I have a 1:1 transformation step followed by a sync send step. The transformation step is executing fine. While the sync step is executing, I am getting an error says 'No receiver determination found'.
    While I am executing this sync step in a separate, it is working fine.
    Do I need to have 'Receiver determination step' between Transformation step and Sync send step? I think so. Can somebody confirms this?
    Thanks for your kind help.
    Kalyan

    Hi,
    I think there is no need of a Receiver determination step in the BPM.
    You should have a proper receiver determination in configuration for this BPM scenario. (i.e) A receiver determination from BPM to the service configured for the synchronous interface.
    Regards,
    P.Venkat

  • How many Receiver determination in File to SOAP scenario

    Hi,
    I am trying a File -SOAP-File scenario, where file will be send to PI asynchronous. BPM is configured to receive the file and
    call the web services and get the response (Synchronous call) .After that BPM send the file asynchronous to File via FTP .
    It is basically asynchronous/ Synchronous bridge scenario.
    To do this I have  have configured the BPM  & created 3 Communication channel . 1 sender (File) & 2 receivers ( SOAP & File)
    But i got confused in Receiver determination. How many Receiver determinations do we require in this step?  2 or 3. If 3 how they will look like. I believe Interface determination is same as Receiver determination. I am suing Business System to send & recv the file.
    Points will be rewarded for suitable answer.
    Thanks

    hi,
    You require 3 receiver determinations.
    one from File to BPM(XI)..
    another from BPM to SOAP and other from SOAP to FILE.
    This is exactly the same scenario.
    RFC Scenario using BPM --Starter Kit
    Thanks,
    Vijaya

  • Failed Receiver Determination on empty file

    I have seen suggestions matching the solution I have tried, but it is not working in my scenario.
    The scenario is an empty CSV file inbound to 3 receivers.  In the standard receiver determination,  I created a context condition for the 'SAP system' receiver, which uses RFC adapter.  The condition is:  'Sourcefilesize not equal 0'.  For an empty file, the 'SAP system' receiver should not be selected because it has mapping to the RFC structure.   The other 2 receivers are SFTP and file, and the client requires they receive the empty input file.
    I see the file size is captured in the dynamic configuration in the MONI:
    namespace:  XI/System/File.....name="Sourcefilesize">0<SAP:record...
    The error is: Problem while determining receivers using interface mapping:  Error while determining root tag of XML: BOM / charset detection failed.
    The system is PI 7.1, the sender comm channel is Advantco with namespace override and content conversion.  I have tried using file type 'binary' and type 'text', with UTF-8 encoding - results in the same error either way.  
    The file is coming from an external vendor - I do not believe they will make any changes to it, so hopefully this can be resolved in PI. 
    All suggestions are appreciated.  Thank you.

    Hareesh and Osman, thank you for your replies.
    I should have pasted the entire message.  When testing in the IB, it fails in receiver determination..
    ""Error when determining the receiver: Problem while determining receivers using interface mapping: Error while determining root tag of XML: BOM / charset detection failed Error while parsing an XML stream: &#39;BOM / charset detection failed&#39""
    Only the SAP system RFC receiver has message mapping - the SFTP and file receivers do not.  (I have changed only namespace and system names in screen below)
    Receiver determination -
    Interface Determination XXXX_D
    Interface Determination Archive_D
    Interface Determination SAP system

  • Question about Receiver Determination step in BPM

    Hello all,
    I have a BPM process similar to Multicat BPM Pattern.
    I have some questions regarding how the Receiver Determination works:
    1. Does it have to have interface determination in the Integration Directory?
    2. Does that interface determination (including the mapping) takes place when sending a message to a receiver from that Receiver Determination step,
    or should I perform a Mapping step explicitly in the process?
    Thanks ahead,
    Yoav.

    Yoav,
    Am not sure if I understood your requirement compltely.
    <b>Case A:</b>If you are using a send step without a Transformation Step.
    Then <b>Send will have message A</b> being sent out from BPm and then , during Interface Determiantion this will be transformed into Message B by Mapping in Interface Determination and this message B will be received by receiver
    <b>Case B:</b>If you have a transform and then a Send
    In this case, the mapping has been done, so you have the message B with you and so, <b>them message sent from the BPM will be message B</b>Hope this clarifies,
    Regards,
    Bhavesh
    Message was edited by: Bhavesh Kantilal

  • How does Receiver Determination Step in BPM work?

    Hi,
    I'm still in trouble with the Receiver determination step in the BPM...
    Normally, when you use the send step, it sends the message in the flow context. Am I right, when I suppose, that when you put the receiver determination step before this send step, the send step sends the message in the context of the receiver determination - that means: if in the Integration Directory, there is receiver determination (with some conditions) and these are matched with the message in the send step, the send step sends it into the receiver, that is defined for the condition and not in the flow context... Right?
    Please, write me just your experiences and not links to the documentation. I read it all, but... :O(
    Thanx 4 your help, Peter

    Hi Peter,
    The receiver determination step is used to get a list of receivers for a subsequent send step.It makes a call to the receiver determination you configured in the Integration Directory and returns the receiver list.
    Here you specify the send context and the multiline container element for the receiver list.
    The send context is a string.The send context can have any string value and depending upon the condition in recvr determination you can route to multiple receivers.
    Regards
    Priyanka

  • Receiver Determination step in BPM along with acknowledgement

    Hi All,
    We are planing to implement an  idoc to soap scenario .
    There are 2 receiver systems, A and B.
    The Idoc needs to be sent to either System A or System B based on the value of one of the fields in Idoc . Once the Idoc is sent to the receiver system ,the receiver system will be sending an acknowledgement back to the PI system. We are using BPM for this purpose.
    So,we need help in the receiver Determination step of the BPM and how to configure the acknowledgement back to the PI system
    Thanks & Regards,
    Rohit

    So,we need help in the receiver Determination step of the BPM and how to configure the acknowledgement back to the
    PI system
    I have seen the use of Receiver Determination step inside a BPM in case when you want to send multiple messages to one target system and then keep on receiving the response messages.
    In your case can you not use the Switch Block to help you decide the subsequent steps (once you know the value in the field from IDOC which tells you the receiver)....then in the corresponding branch of the Switch include Send and receive step. If you provide more details on what your BPM is expected to do then somebody can help you with the design.

  • Receiver determination step in the BPM and multiline container

    i have made a file2file scenario where:
    there is a BPM,
    the BPM has a send step which contains a receive step,
    a transformation that mapps the incomin message to two messages(Split-messgae case),
    and then a FORK step which sends the two messges to through 2 SEND steps to the intended receiver services.
    It didnt work......and i followed a blog->  /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure   ............... which suggested to have a
    "receiver-determination" step in the BPM before the SEND step.... it says that this
    "receiver-determination" step will put the message in a MULTILINE container..
    i m confused bout this step ........ can anybody explain.....
    please help

    HI,
    In receiver determination step selctthe multi line container element.in container editor create the one element with type as receiver and select the check box.
    A Receiver Determination step returns set of receivers configured for the output abs interfaces in the directory and puts it into receiver which is a multiline container receiver element
    Regards
    Chilla

  • BPM step Receiver Determination

    Hello Friends,
    the operator "Receiver Determination" - how can be used in BPM? Is there any weblog or example for that?
    Best Regards,
    F.K.

    check this link
    Receiver Determination in BPM
    Use of Receiver determination step in BPM

  • Dynamic Receiver Determination [W/O using BPM] Sync interface

    I have been exploring options w.r.t. performance sensitive service interface.
    This has following issues :
    1. Gets a org code looking up instance and route the msg. accordingly to an RFC and get response back.
    2. Prominent answer would be Enhanced receiver determination step but that doesnt work in sync case.
    3. Classic Receiver Determination needs the condition to be evaluated in source msg. which is not going to happen.
    4. Use BPM i designed one but performance its not all acceptable it has a round trip of 10Sec.
    are there any ways to overcome this ?

    Hi Bujji,
    can you explain the point 1.
    <i>1. Gets a org code looking up instance and route the msg. accordingly to an RFC and get response back.</i>
    Thanks and Regards,
    Himadri
    null

  • Receiver determination in BPM

    Hi Folks,
        I wanted to send a message to 2 receivers from 1 sender using BPM. People on SDN advice that I have to use 3 receiver determinations for it. I just can't understand why to use 2 receiver determinations where as I have only 2 receivers. Why shall I use a receiver determination for the sender ? Can anybody explain this logic ?
    Regards,
      Santosh

    HI Chandra,
    There will be only one reciever determination.
    In reciever determination what can be done is one sender and recievers will be two as
    well as ineterface determination and reciever agreement will be 2.
    Can you explain how is this possible?....In the first receiver determination the connection will be done for Sender --> BPM.....
    In second BPM---> Receiver1
    In third BPM--->Receiver2
    Regards,
    Abhishek.

  • Receiver Determination in BPM - Correct me

    Hi everyone,
    I came accross some document saying that
    <b>every send/ receive step in BPM, there should be one receiver determination.</b>
    Can anyone explain this to me.
    thanks,
    -Naveen.

    Hi,
    Yes your IP will be another service like your Business Service/System
    If your BPM is like this
    receive>Transform>Send
    then in ID receiver determiniation would be
    SenderBS --> IP
    IP-->RecieverBS
    Regards,
    Prakash

  • Receiver Determination with Synchrnous Send step in BPM

    Hi,
       Is there any way to use BPM Receiver Determination step type with Synchronous send step ?
    Is it possible to send a request to multiple receivers synchronously and capture the response?
    Appreciate for your response.
    Thanks,
    Rao.Mallikarjuna

    Use malticasting, check out these blogs
    Multicasting using Receiver Determination Step in BPM
    and pattern number 6 in BPM with Patterns explained Part-2
    Thanks!

Maybe you are looking for