Receiving Transaction Processor not processing PENDING records
Good day,
I have pending records sitting in the RCV_HEADERS_INTERFACE, RCV_TRANSACTIONS_INTERFACE and MTL_SERIAL_NUMBERS_INTERFACE. The PROCESSING_STATUS_CODE is set to "BATCH". But when I run the Receiving Transaction Processor nothing happens. The records are still in the interface tables as pending and the PO_INTERFACE_ERRORS table does not get populated with errors.
Kindly help by suggesting what I'm doing wrong. Why is the processor not picking up the records?
Thanking you in advance.
How are you trying to receive the items. Is it through iProcurement or Core Purchasing Forms?
Similar Messages
-
Receiving transaction processor populates quantity_received = 0
Hello Everyone,
I'm populating a non-zero value into rcv_transactions_interface.quantity field. After Receiving Transaction Processor is run, a record is created in rcv_shipment_headers table and rcv_shipment_lines tables. But rcv_shipment_lines.quantity_received is popilated with 0 where as quantity_shipped is populated correctly with the value that is inserted in the interface table.
When this happens the shipment_line_status_code is 'EXPECTED' and there is no record created in rcv_transactions table.
Can any one please let me why this happens??
Thanks in Advance
Sunny.Hi,
Check out metalink Note:219958.1
cause: The parent_transaction_id loaded into the rcv_transactions_interface table did not exist -
'Receiving Transaction Processor' ends with error. Receipt not saved.
Trying to make receipt. On header done add to receipt. When the receipt is selected and saved. & then tried to open receving transaction. Receipt NOT found also 'Receiving Transaction Processor' ends with error.
Plz Suggest soluntion.
Regds
9999When we do receipts then atomatically receiving transaction process runs. On header of receipt there is add to receipt oprtion. User adding in erliar made receipt. But when done add to receipt transction get saved but this receipt number not able to find in receiving transaction.
Now kindly help..!!!
9999 -
Receiving Transaction Processor runs even if processing mode is ON-LINE
Hi All,
We have a problem with receiving. The profile option RCV: Processing Mode is set to ON-LINE at site level. We observed that the Receiving Transaction Processor is running for a bunch of transactions with IMMEDIATE processing mode.
We checked the responsibility level and user level profile options too and nothing is set. only at site level we have that profile option set to ON-LINE.
What could be the reason for this Transaction Processor to run???
Please let us know.
Thanks,
PrathimaHow are you trying to receive the items. Is it through iProcurement or Core Purchasing Forms?
-
Urgent Please - Receiving Transaction Processor Issue
Hi,
We are on 11.5.10. I am trying to create PO receipts using the interface program "Receiving Transaction Processor". I inserted data into the rcv_headers_interface and rcv_transactions_interface tables. As this dta is for contract labor, i am assuming that there is no need to insert data into shipment_related interface table. Following shows the insert statement I made sure that I am running the process from the correct org (the org that i used in the filed destination_oprganization field). But still the process completes normally but po_interface_errors has a record with error message as :
"RVTSH-189: Subroutine rvtshiline() returned error
Cause: Subroutine rvtshiline() returned an internal error.
Action: Note this error number and the actions you are trying to perform.
Contact your system administrator for"
The receipt gets created succesfully from the form. Anyone knows the issue? Please help me...thanks
Here are the insert statements...
--Insert data into Interface tables
INSERT INTO rcv_headers_interface
(header_interface_id,
GROUP_ID,
processing_status_code,
receipt_source_code,
transaction_type,
auto_transact_code,
last_update_date,
last_updated_by,
creation_date,
created_by,
expected_receipt_date,
comments,
validation_flag,
packing_slip,
vendor_id,
vendor_site_id,
ship_to_organization_id
VALUES (rcv_headers_interface_s.NEXTVAL,
rcv_interface_groups_s.NEXTVAL,
'PENDING',
'VENDOR',
'NEW',
'RECEIVE',
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
SYSDATE,
'test',
'Y',
'ABC',
po_headers.vendor_id,
po_headers.vendor_site_id
po_distributions.destination_organization_id
--Insert record in transactions_interface
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id,
processing_status_code,
receipt_source_code,
transaction_date,
GROUP_ID,
last_update_date,
last_updated_by,
creation_date,
created_by,
transaction_type,
processing_mode_code,
transaction_status_code,
quantity,
unit_of_measure,
source_document_code,
po_header_id,
po_line_id,
po_line_location_id,
po_distribution_id,
to_organization_id,
comments,
interface_source_code,
employee_id,
auto_transact_code,
destination_type_code,
attribute_category,
category_id,
item_description
VALUES (rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL,
'PENDING',
'VENDOR',
SYSDATE,
rcv_interface_groups_s.CURRVAL,
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
'RECEIVE', --'NEW',
'BATCH',
'PENDING',
2,
po_lines.unit_meas_lookup_code,
'PO',
po_headers..po_header_id,
po_lines.po_line_id,
po_line_locations.po_line_location_id,
po_distributions.po_distribution_id,
po_distributions.destination_organization_id,
'TEST',
'RCV',
1234, --employee_id
'RECEIVE',
'RECEIVING',
po_distributions.destination_organization_id,
45074,
'Standard'
);Pl see you duplicate post here - PO Receipts Interface Error!!
For urgent issues, pl open an SR with Support
Srini -
Urgent Please - Receiving Transaction Processor
Hi,
We are on 11.5.10. I am trying to create PO receipts using the interface program "Receiving Transaction Processor". I inserted data into the rcv_headers_interface and rcv_transactions_interface tables. As this dta is for contract labor, i am assuming that there is no need to insert data into shipment_related interface table. Following shows the insert statement I made sure that I am running the process from the correct org (the org that i used in the filed destination_oprganization field). But still the process completes normally but po_interface_errors has a record with error message as :
"RVTSH-189: Subroutine rvtshiline() returned error
Cause: Subroutine rvtshiline() returned an internal error.
Action: Note this error number and the actions you are trying to perform.
Contact your system administrator for"
The receipt gets created succesfully from the form. Anyone knows the issue? Please help me...thanks
Here are the insert statements...
--Insert data into Interface tables
INSERT INTO rcv_headers_interface
(header_interface_id,
GROUP_ID,
processing_status_code,
receipt_source_code,
transaction_type,
auto_transact_code,
last_update_date,
last_updated_by,
creation_date,
created_by,
expected_receipt_date,
comments,
validation_flag,
packing_slip,
vendor_id,
vendor_site_id,
ship_to_organization_id
VALUES (rcv_headers_interface_s.NEXTVAL,
rcv_interface_groups_s.NEXTVAL,
'PENDING',
'VENDOR',
'NEW',
'RECEIVE',
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
SYSDATE,
'test',
'Y',
'ABC',
po_headers.vendor_id,
po_headers.vendor_site_id
po_distributions.destination_organization_id
--Insert record in transactions_interface
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id,
processing_status_code,
receipt_source_code,
transaction_date,
GROUP_ID,
last_update_date,
last_updated_by,
creation_date,
created_by,
transaction_type,
processing_mode_code,
transaction_status_code,
quantity,
unit_of_measure,
source_document_code,
po_header_id,
po_line_id,
po_line_location_id,
po_distribution_id,
to_organization_id,
comments,
interface_source_code,
employee_id,
auto_transact_code,
destination_type_code,
attribute_category,
category_id,
item_description
VALUES (rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL,
'PENDING',
'VENDOR',
SYSDATE,
rcv_interface_groups_s.CURRVAL,
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
'RECEIVE', --'NEW',
'BATCH',
'PENDING',
2,
po_lines.unit_meas_lookup_code,
'PO',
po_headers..po_header_id,
po_lines.po_line_id,
po_line_locations.po_line_location_id,
po_distributions.po_distribution_id,
po_distributions.destination_organization_id,
'TEST',
'RCV',
1234, --employee_id
'RECEIVE',
'RECEIVING',
po_distributions.destination_organization_id,
45074,
'Standard'
);Pl see your triplicate post here - PO Receipts Interface Error!!
For urgent issues, pl open an SR with Support.
Srini -
RCV_TP_INVALID_DEST_TYPE for Receiving Transaction Processor (Receiving Transaction Processor)
Hi
I have a receipt_num 1234 that has 14 lines in it ( from 29-46) and the po_number is 454545.
When I load the receipt with the receiving trans process a recipt get created for all lines except for 1.
This particular line which is 46 is still in the rcv_transactions_interface table as an error, when Update this table and SET processing_status_code = 'PENDING',
transaction_status_code = 'PENDING' and rerun the program it's does not load the data and it complete with a warning and when I look at the po_interface_errors I see this(RCV_TP_INVALID_DEST_TYPE). and put the processing_status_code = 'COMPLETED'and transaction_status_code = 'ERROR'.
Please help please help
nullRCV_HEADERS_INTERFACE
RCV_TRANSACTIONS_INTERFACE
If you have serial numbers or lot numbers for the receipts, then you need to insert into
RCV_SERIALS_INTERFACE
RCV_LOTS_INTERFACE
Once the transactions are processed, you will see records in
RCV_SHIPMENT_HEADERS
RCV_SHIPMENT_LINES
For details on the interface, check irep.oracle.com
See Import PO Receipts using custom conversion. for some scripts.
And see http://www.oracleug.com/tables/purchasing/rcvheadersinterface and http://www.oracleug.com/tables/purchasing/rcvtrnsactionsinterface for details on the tables.
Hope this answers your question,
Sandeep Gandhi -
Need help in Receiving Transaction Processor concurrent in Oracle Apps
Hi every one,
Please give me idea about Receiving Transaction Processor concurrent in oracle application.
I am inserting values in following table like:
**rcv_transactions_interface**
**rcv_headers_interface**
**MTL_TRANSACTION_LOTS_INTERFACE**
RCV_LOTS_INTERFACE
for getting DELIVER/ RECEIVE in a single submit..
but the problem is RECEIVE will happening as GOOD. but DELIVER process not happening... please help me...
i am using following QUERIES to insert,
INSERT INTO RCV_HEADERS_INTERFACE
(HEADER_INTERFACE_ID,
GROUP_ID,
PROCESSING_STATUS_CODE,
RECEIPT_SOURCE_CODE,
TRANSACTION_TYPE,
AUTO_TRANSACT_CODE,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
LAST_UPDATE_LOGIN,
CREATION_DATE,
CREATED_BY,
SHIPMENT_NUM,
FROM_ORGANIZATION_ID,
SHIP_TO_ORGANIZATION_ID,
EXPECTED_RECEIPT_DATE,
SHIPPED_DATE,
-- PACKING_SLIP,
-- INVOICE_NUM,
-- PAYMENT_TERMS_ID,
EMPLOYEE_ID,
-- COMMENTS,
-- ATTRIBUTE1,
-- ATTRIBUTE3,
-- ATTRIBUTE10,
-- ATTRIBUTE12,
VALIDATION_FLAG)
VALUES
l_headers_interface, -- INTERFACE_TRANSACTION_ID
rcv_interface_groups_s.nextval, GROUP_ID - rcv_interface_groups_s.nextval,
'PENDING', --PROCESSING_STATUS_CODE
'INTERNAL ORDER', --RECEIPT_SOURCE_CODE
'NEW', --TRANSACTION_TYPE
'DELIVER', --AUTO_TRANSACT_CODE
SYSDATE, --LAST_UPDATE_DATE
l_user_id, --LAST_UPDATED_BY
l_login_id, --LAST_UPDATE_LOGIN
SYSDATE, --CREATION_DATE
l_user_id, --CREATED_BY
d.SHIPMENT_NUM, --SHIPMENT_NUM
d.from_organization_id,
d.TO_ORGANIZATION_ID, --TO_ORGANIZATION_ID
SYSDATE+1, --EXPECTED_RECEIPT_DATE,
SYSDATE, --SHIPPED_DATE
d.employee_id, --EMPLOYEE_ID
'Y' --VALIDATION_FLAG
--Insert values into RCV_TRANSACTION_INTERFACETABLE
commit;
INSERT INTO RCV_TRANSACTIONS_INTERFACE
(INTERFACE_TRANSACTION_ID,
GROUP_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
TRANSACTION_TYPE,
TRANSACTION_DATE,
PROCESSING_STATUS_CODE,
PROCESSING_MODE_CODE,
TRANSACTION_STATUS_CODE,
QUANTITY,
UNIT_OF_MEASURE,
INTERFACE_SOURCE_CODE,
ITEM_ID,
EMPLOYEE_ID,
AUTO_TRANSACT_CODE,
SHIPMENT_HEADER_ID,
SHIPMENT_LINE_ID,
SHIP_TO_LOCATION_ID,
RECEIPT_SOURCE_CODE,
FROM_ORGANIZATION_ID,
TO_ORGANIZATION_ID,
SOURCE_DOCUMENT_CODE,
REQUISITION_LINE_ID,
REQ_DISTRIBUTION_ID,
DESTINATION_TYPE_CODE,
DELIVER_TO_PERSON_ID,
LOCATION_ID,
DELIVER_TO_LOCATION_ID,
SUBINVENTORY,
SHIPMENT_NUM,
EXPECTED_RECEIPT_DATE,
-- SHIPMENT_LINE_STATUS_CODE,
SHIPPED_DATE,
HEADER_INTERFACE_ID,
-- COMMENTS,
-- OE_ORDER_HEADER_ID,
-- OE_ORDER_LINE_ID,
-- ATTRIBUTE1,
-- ATTRIBUTE3,
-- ATTRIBUTE10,
-- ATTRIBUTE12,
VALIDATION_FLAG
VALUES
(l_trans_id, -- INTERFACE_TRANSACTION_ID
rcv_interface_groups_s.currval, --GROUP_ID rcv_interface_groups_s.curval
SYSDATE, --LAST_UPDATE_DATE
l_user_id, --LAST_UPDATED_BY
SYSDATE, --CREATION_DATE
l_user_id, --CREATED_BY
l_login_id, --LAST_UPDATE_LOGIN
'RECEIVE', --TRANSACTION_TYPE
SYSDATE, --TRANSACTION_DATE
'PENDING', --PROCESSING_STATUS_CODE
'BATCH', --PROCESSING_MODE_CODE
'PENDING', --TRANSACTION_STATUS_CODE
d.QTY, --QUANTITY
d.UNIT_OF_MEASURE, --'Metric Ton', --UNIT_OF_MEASURE
'ORDER ENTRY',--'RCV', --INTERFACE_SOURCE_CODE
d.item_id , --ITEM_ID
d.employee_id, --EMPLOYEE_ID
'DELIVER', --AUTO_TRANSACT_CODE
d.shipment_header_id, --SHIPMENT_HEADER_ID
d.SHIPMENT_LINE_ID, --SHIPMENT_LINE_ID
d.SHIP_TO_LOCATION_ID, --SHIP_TO_LOCATION_ID
'INTERNAL ORDER', --RECEIPT_SOURCE_CODE
d.from_organization_id,
d.TO_ORGANIZATION_ID, --TO_ORGANIZATION_ID
'REQ', --SOURCE_DOCUMENT_CODE
d.REQUISITION_LINE_ID, --REQUISITION_LINE_ID
d.REQ_DISTRIBUTION_ID, --REQ_DISTRIBUTION_ID
'INVENTORY', --DESTINATION_TYPE_CODE
d.DELIVER_TO_PERSON_ID, --DELIVER_TO_PERSON_ID
d.location_id, --LOCATION_ID
d.DELIVER_TO_LOCATION_ID, --DELIVER_TO_LOCATION_ID
d.SUBINVENTORY, --SUBINVENTORY
d.SHIPMENT_NUM, --SHIPMENT_NUM
SYSDATE+1, --EXPECTED_RECEIPT_DATE,
-- 'FULLY RECEIVED', --SHIPMENT_LINE_STATUS_CODE
SYSDATE, --SHIPPED_DATE
l_headers_interface, --HEADER_INTERFACE_ID
'Y' --VALIDATION_FLAG
commit;
INSERT INTO RCV_LOTS_INTERFACE
(INTERFACE_TRANSACTION_ID
,LAST_UPDATE_DATE
,LAST_UPDATED_BY
,CREATION_DATE
,CREATED_BY
,LOT_NUM
,SUBLOT_NUM
,SHIPMENT_LINE_ID
,QUANTITY
,TRANSACTION_DATE
,PRIMARY_QUANTITY
,ITEM_ID
,LAST_UPDATE_LOGIN
VALUES
(l_trans_id,
SYSDATE, --LAST_UPDATE_DATE
l_user_id, --LAST_UPDATED_BY
SYSDATE, --CREATION_DATE
l_user_id,
d.lot_number,
D.SUBLOT_NUMBER,
D.SHIPMENT_LINE_ID,
d.QTY,
SYSDATE,
d.TO_ORG_PRIMARY_QUANTITY,
d.item_id,
l_login_id
commit;
INSERT INTO MTL_TRANSACTION_LOTS_INTERFACE (
TRANSACTION_INTERFACE_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
LOT_NUMBER,
SUBLOT_NUM,
TRANSACTION_QUANTITY,
PRIMARY_QUANTITY,
PRODUCT_CODE,
PRODUCT_TRANSACTION_ID) --link to rcv_transactions_interface
VALUES
(l_mtl_trans,
SYSDATE, --LAST_UPDATE_DATE
l_user_id, --LAST_UPDATED_BY
SYSDATE, --CREATION_DATE
l_user_id, --CREATED_BY
l_login_id,--LAST_UPDATE_LOGIN
d.lot_number,--'lt2002',
d.SUBLOT_NUMBER,
d.QTY,
d.TO_ORG_PRIMARY_QUANTITY,
'RCV',
l_trans_id);
commit;Hi helios,
Thanks for your Immediate response.
My Problem is When i submitting concurrent. It Updating as FULLY RECEIVED status the RCV_SHIPMENT_HEADERS, and RCV_SHIPMENT_LINES tables.
But It not put one Entry as DELIVERED in RCV_SHIPMENT_LINES table ,so that not updating INVONTRY TABLES.
Please share me some ideas...
Thanks,
Lingesan...
Edited by: user9031196 on Jul 8, 2011 1:46 AM -
RVCTP module: Receiving Transaction Processor
Hi,
I am doing receipt using by passing ASN no as input parameter, not picking the records from interface tables.
when i checked in rcv_transactions_interface table proceeing_status_code is "RUNNING" , "PENDING" .
when i run the Receiving Transaction Processor got below error.
i changed profile option as "BATCH", still getting same error
please help to solve this
Purchasing: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: Receiving Transaction Processor
Current system time is 16-NOV-2010 13:05:39
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,BATCH,122227,
Action: Note both this error number and the actions you are trying to perform. Contact your system admini
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause: Subroutine rvtbm_batch_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-080: Subroutine rvtptcontrol() returned error
Cause: Subroutine rvtptcontrol() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator
RVTLO-005: ORA-01403: no data found
Cause: A SQL error has occurred in RVTLO. The SQL error is &LSQL_ERR.
Action: Take note of both this error number and the actions you were t
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
Current system time is 16-NOV-2010 13:05:40
Executing request completion options...Hi Sandeep,
thanks for your reply,
i am inserting the records using below script.
INSERT INTO RCV_HEADERS_INTERFACE
HEADER_INTERFACE_ID
,GROUP_ID
,PROCESSING_STATUS_CODE
,RECEIPT_SOURCE_CODE
,TRANSACTION_TYPE
-- ,RECEIPT_HEADER_ID
,LAST_UPDATE_DATE
,LAST_UPDATED_BY
,LAST_UPDATE_LOGIN
,CREATION_DATE
,CREATED_BY
,VENDOR_ID
,VENDOR_SITE_ID
,VALIDATION_FLAG
,ATTRIBUTE12
-- ,SHIPMENT_NUM
,EMPLOYEE_ID
,BILL_OF_LADING
,PACKING_SLIP
,NUM_OF_CONTAINERS
,GROSS_WEIGHT
,GROSS_WEIGHT_UOM_CODE
,WAYBILL_AIRBILL_NUM
,COMMENTS
,FREIGHT_TERMS
,INVOICE_NUM
,INVOICE_DATE
,ATTRIBUTE1
,ATTRIBUTE2
,ATTRIBUTE3
,ATTRIBUTE4
,ATTRIBUTE6
,ATTRIBUTE7
,ATTRIBUTE8
,ATTRIBUTE9
,ATTRIBUTE10
,ATTRIBUTE11
,SHIPPED_DATE
,EXPECTED_RECEIPT_DATE
-- ,RECEIPT_NUM
VALUES(l_header_interface_id
,l_group_id
,'BATCH' --'PENDING'
,'VENDOR'
,'NEW' --'RECEIVE'
-- ,H.SHIPMENT_HEADER_ID
,sysdate
,l_user_id
,l_login_id
,H.CREATION_DATE
,H.CREATED_BY
,H.VENDOR_ID
,H.VENDOR_SITE_ID
,'Y'
,H.ATTRIBUTE12
-- ,l_sil_number
,H.EMPLOYEE_ID
,H.BILL_OF_LADING
,H.PACKING_SLIP
,H.NUM_OF_CONTAINERS
,H.GROSS_WEIGHT
,H.GROSS_WEIGHT_UOM_CODE
,H.WAYBILL_AIRBILL_NUM
,H.COMMENTS
,H.FREIGHT_TERMS
,H.INVOICE_NUM
,H.INVOICE_DATE
,H.ATTRIBUTE1
,H.ATTRIBUTE2
,H.ATTRIBUTE3
,H.ATTRIBUTE4
,H.ATTRIBUTE6
,H.ATTRIBUTE7
,H.ATTRIBUTE8
,H.ATTRIBUTE9
,H.ATTRIBUTE10
,H.ATTRIBUTE11
,H.SHIPPED_DATE
,sysdate
-- ,11111111
INSERT INTO RCV_TRANSACTIONS_INTERFACE
INTERFACE_TRANSACTION_ID
,GROUP_ID
,LAST_UPDATE_DATE
,LAST_UPDATED_BY
,CREATION_DATE
,CREATED_BY
,LAST_UPDATE_LOGIN
,TRANSACTION_TYPE
,TRANSACTION_DATE
,PROCESSING_STATUS_CODE
,PROCESSING_MODE_CODE
,TRANSACTION_STATUS_CODE
,QUANTITY
,UNIT_OF_MEASURE
,ITEM_ID
,UOM_CODE
,INTERFACE_SOURCE_CODE
,SHIPMENT_HEADER_ID
-- ,SHIPMENT_LINE_ID
--,USER_ENTERED_FLAG
,SOURCE_DOCUMENT_CODE
,DESTINATION_TYPE_CODE
,PRIMARY_QUANTITY
,PRIMARY_UNIT_OF_MEASURE
,RECEIPT_SOURCE_CODE
,EMPLOYEE_ID
,PARENT_TRANSACTION_ID
,PO_HEADER_ID
,PO_RELEASE_ID
,PO_LINE_ID
,PO_LINE_LOCATION_ID
,PO_DISTRIBUTION_ID
--,PO_REVISION_NUM
,PO_UNIT_PRICE
,CURRENCY_CODE
,CURRENCY_CONVERSION_TYPE
,CURRENCY_CONVERSION_RATE
,CURRENCY_CONVERSION_DATE
,VENDOR_ID
,VENDOR_SITE_ID
,TO_ORGANIZATION_ID
,LOCATOR_ID
,SHIP_TO_LOCATION_CODE
-- ,AUTO_TRANSACT_CODE
,VALIDATION_FLAG
VALUES
l_transaction_id
,l_group_id
,sysdate
,l_user_id
,sysdate
,l_user_id
,l_login_id
,'RECEIVE'
,sysdate
,'PENDING'
,'BATCH'
,'PENDING'
,r.QUANTITY_SHIPPED
,r.UNIT_OF_MEASURE
,r.ITEM_ID
,l_uom_code--UOM_CODE
,'RCV'
,l_header_interface_id --r.SHIPMENT_HEADER_ID
-- ,r.SHIPMENT_LINE_ID
-- ,'Y' --USER_ENTERED_FLAG
,'PO' --SOURCE_DOCUMENT_CODE
,'RECEIVING' -- DESTINATION_TYPE_CODE
,r.QUANTITY_SHIPPED --PRIMARY_QUANTITY
,r.PRIMARY_UNIT_OF_MEASURE --PRIMARY_UNIT_OF_MEASURE
,'VENDOR' -- RECEIPT_SOURCE_CODE -
,r.EMPLOYEE_ID --EMPLOYEE_ID
,-1 --PARENT_TRANSACTION_ID -
,r.PO_HEADER_ID
,r.PO_RELEASE_ID
,r.PO_LINE_ID
,r.PO_LINE_LOCATION_ID
,r.PO_DISTRIBUTION_ID
--,r.PO_REVISION_NUM
,r.UNIT_PRICE --PO_UNIT_PRICE
,r.CURRENCY_CODE
,r.RATE_TYPE -- CURRENCY_CONVERSION_TYPE -
,r.RATE -- CURRENCY_CONVERSION_RATE
,r.RATE_DATE -- CURRENCY_CONVERSION_DATE
,r.VENDOR_ID
,r.VENDOR_SITE_ID
,r.TO_ORGANIZATION_ID --ORGANIZATION_ID
,41
,'GNE JEBEL ALI'
-- ,'DELIVER'
,'Y'
can you plz suggest if i am wrong -
Receiving Transaction Processor updates in rcv_transactions_interface
Hi,
We use an legacy inventory system to receive lots. Once received a custom program puts the records into rcv_transactions_interface table for interfacing and calls the Receiving Transaction Processor. Now, the Receiving Transaction Processor updates the rcv_transactions_interface with error. The error in po_interface_errors table is
The item id (NUMBER = **********) does not match the item_id in the Purchase Order.
But the item in present in the Purchase order which I have mentioned. Please help me in finding out the resolution for this issue.
ThanksCan you do this and let us know the results?
1. Change the Proflle value for RCV: Processing Mode to Batch
2. Change the profile value for RCV: Debug Mode to Yes
3. Perform transaction
4. Run Receiving Transaction Processor
5. Check the log file at the bottom.
6. If you can send the log file,. we can assist.
Also as a clue this error looks like is coming back from Inventory. Please check whether the item controls are correctly setup and item attributes are enabled correctly. Your code combinations are all still enabled that are used in the po distributions and so on.
Thanks
Nagamohan -
Interface and Base tables for Receiving Transaction Processor Program
Hi Everyone,
My requirement is to move data from staging table to rcv interface tables and then run Receiving transaction processor program. How will in know what interface tables i need to insert data into? and after I run the concurrent program what are the base tables that i need to check to confirm?
Please help!
Thanks
SunnyRCV_HEADERS_INTERFACE
RCV_TRANSACTIONS_INTERFACE
If you have serial numbers or lot numbers for the receipts, then you need to insert into
RCV_SERIALS_INTERFACE
RCV_LOTS_INTERFACE
Once the transactions are processed, you will see records in
RCV_SHIPMENT_HEADERS
RCV_SHIPMENT_LINES
For details on the interface, check irep.oracle.com
See Import PO Receipts using custom conversion. for some scripts.
And see http://www.oracleug.com/tables/purchasing/rcvheadersinterface and http://www.oracleug.com/tables/purchasing/rcvtrnsactionsinterface for details on the tables.
Hope this answers your question,
Sandeep Gandhi -
Receiving Transaction Processor
Hi,
I have inserted the data in RCV_headers_interface and
RCV_transaction_interface and run the Receiving Transaction Processor program, no error in log file.
The PROCESSING_STATUS_CODE column in the rcv_transactions_interface is updated as ' ERROR'.
when I check for the error in po_interface_errors
column_name: INTERFACE_TRANSACTION_ID
error_message:An error occurred while trying to split lot and serial lines.
error_message_name:RCV_SPLIT_LOT_SERIAL_ERROR
table_name:RCV_TRANSACTIONS_INTERFACE
I have populated UOM_CODE in rcv_transactions_interface and Items are not lot or serial controlled.
Can anyone please advise
ThanksHi,
Thanks for replay
I am not passing values for use_mtl_lot and use_mtl_serial columns
Here is the script I used.
INSERT INTO RCV_HEADERS_INTERFACE
HEADER_INTERFACE_ID,
GROUP_ID,
PROCESSING_STATUS_CODE,
RECEIPT_SOURCE_CODE,
TRANSACTION_TYPE,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
LAST_UPDATE_LOGIN,
CREATION_DATE,
CREATED_BY,
SHIPPED_DATE,
VENDOR_NAME, -- or VENDOR_ID
EMPLOYEE_NAME, -- or EMPLOYEE_ID
VALIDATION_FLAG,
SHIP_TO_ORGANIZATION_CODE, -- or SHIP_TO_ORGANIZATION_ID
EXPECTED_RECEIPT_DATE
SELECT
RCV_HEADERS_INTERFACE_S.NEXTVAL,
RCV_INTERFACE_GROUPS_S.NEXTVAL,
'PENDING',
'VENDOR',
'NEW',
sysdate,
1,
1,
sysdate,
1,
sysdate,
'&vendor_name',--or vendor_id
'&agent_id', -- or agent_id
'Y',
organization_id
sysdate+5
FROM DUAL;
INSERT INTO RCV_TRANSACTIONS_INTERFACE
(INTERFACE_TRANSACTION_ID,
HEADER_INTERFACE_ID,
GROUP_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
TRANSACTION_TYPE,
TRANSACTION_DATE,
PROCESSING_STATUS_CODE,
PROCESSING_MODE_CODE,
TRANSACTION_STATUS_CODE,
QUANTITY,
UNIT_OF_MEASURE,
AUTO_TRANSACT_CODE,
RECEIPT_SOURCE_CODE,
SOURCE_DOCUMENT_CODE,
DOCUMENT_NUM, -- or PO_HEADER_ID
RELEASE_NUM, -- or PO_RELEASE_ID
DOCUMENT_LINE_NUM, -- or PO_LINE_ID
DOCUMENT_SHIPMENT_LINE_NUM, -- or PO_LINE_LOCATION_ID
SHIP_TO_LOCATION_CODE, -- or SHIP_TO_LOCATION_ID
VALIDATION_FLAG,
DELIVER_TO_LOCATION_CODE, -- or DELIVER_TO_LOCATION_ID
TO_ORGANIZATION_CODE, -- or TO_ORGANIZATION_ID
UOM_CODE,
destination_type_code,
po_distribution_id
SELECT
RCV_TRANSACTIONS_INTERFACE_S.NEXTVAL,
RCV_HEADERS_INTERFACE_S.CURRVAL,
RCV_INTERFACE_GROUPS_S.CURRVAL,
SYSDATE,
1,
SYSDATE,
1,
1,
'RECEIVE',
sysdate,
'PENDING',
'BATCH',
'PENDING',
quantity, -- make sure to enter the quantity <= qty_ordered – qty_received
'EACH',
'DELIVER',
'VENDOR',
'PO',
'&po_num', -- or po_header_id
null, -- or po_release_id
po_line_id,
line_location_id
'&ship_to_location_code', -- or location_id
'Y',
&DELIVER_TO_LOCATION_ID,
&TO_ORGANIZATION_ID,
'&UOM',
'EXPENSE',
&po_distribution_id
FROM DUAL;
Thanks -
Receiving Transaction processor with Receipt Traveller Concurrent program
Hi
We have customized Receipt Traveller Concurrent program (Customized) to get rich Publiishing features using BI Publisher Reports technology.
For some receipts we are getting blank page, on observation we noticed that When Receipt Traveller Concurrent program is complete earlier than Receiving
Transaction processor then we are getting blank pages for receipt program, Where as if Receitp Traveller concurrent Program is getting completed after
Receiving Transaction processor completion then we don't have issue of blank page.
As a possible solution we have tried to make Receiving Transaction processor Incompatible to Receipt Traveller Concurrent program but still issue remains.
Would like to know if any hint on fixing for this.
Thanks
Kamalakar.GYour Traveler program may need some data that is generated by the transaction processor.
Try setting "RCV: Processing Mode" profile option to On-line; logout and log back in.
See if the problem goes away.
But keep in mind that if set to on-line, the users have to wait (a second or more) till the receipt is processed. Depending on your volume and response times, this may not be acceptable.
Hope this helps,
Sandeep Gandhi -
Issue regarding Receiving Transaction Processor (ROI)
Hi Experts,
We have EBS 11i (11.5.10.2) .
At the time of PO Receipt thru application, the following 3 concurrent processes are running.
(1) Receiving Transaction Processor
(2) Receipt Traveller Concurrent program
(3) Journal Import
After creating the receipt thru application, we can modify the taxes at receipt time also.
Now, same thing we are doing with Interface.
In this scenario, the receipt is created successfuly thru Interface.
Right now, we are running the process : *'Receiving Transaction Processor'* manually for the same.
After running this process, the second process: *'Receipt Traveller Concurrent program'* is not running. In place , process : *'India - Receiving Transaction Processor'* is running.
Also, For receipt created thru interface, we cannot modify the taxes
Can anyone guide me , what we have to do to run the process: *'Receipt Traveller Concurrent program'* and to change the taxes.
KFI, the we have taken processing_mode_code = 'BATCH' in RCV_TRANSACTIONS_INTERFACE table.
regards
SanjayHi PS,
Thanks for reply.
we want to control the receiving transaction processor .
when we are running the process : ' receiving transaction processor ' through interface, another process : ' India - Receiving Transaction ' is automatically fired that we do not want . Due to this , the taxes are freezed at receipt level and we cannot modify the same.
I hope you understood the scenario.
Sanjay -
Error in Receiving Transaction Processor concurrent program
Hi all,i am trying to insert data into rcv_headers_interface and rcv_transactions_interface.So,for this data to get populated in rcv_shipment_headers and rcv_shipment_lines i am running Receiving Transaction Processor concurrent program in purchasing super user.But,this concurrent program gives below error
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: Receiving Transaction Processor
+---------------------------------------------------------------------------+
Current system time is 14-OCT-2011 06:11:05
+---------------------------------------------------------------------------+
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,BATCH,,81,
Action: Note both this error number and the actions you are trying to perform. Contact your system administr
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause: Subroutine rvtbm_batch_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-040: ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APP
Cause: A SQL error has occurred in RVTBM. The SQL error is &LSQL_ERR.
Action: Take note of both this error number and the actions you were t
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
+---------------------------------------------------------------------------+
Current system time is 14-OCT-2011 06:11:10
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
0
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
{code}
Can someone kindly explain me what's really going why coz i am new to this Applications.
Thanks in advance!!There are several notes on metalink for "RVTBM-007: Subroutine rvtbm_batch_mngr() returned error".
Take a look at those.
Also if you are using dual uoms, make sure that setup and conversion is setup correctly.
Hope this helps,
Sandeep Gandhi
Maybe you are looking for
-
How to get checkbox checked when sum equals a certain number
I have created a spreadsheet with 25 rows that will have numerical entries. How do I put in a checkbox that becomes checked once the sum of the numbers Un that row equals a certain number? Thanks in advance.
-
Hi, In my company we have a scenario where one purchasing org serving 2 co.code. This has been set up nicely in ECC, and we suppose to have the same scenario in SRM as well. First, I do this: a. Create company A and company B b. Create org unit below
-
How come, when I add myYahoo! email account to MAIL, after verifying, I always get the "server unavailable. please try again later"
-
IPod Touch stopped working and is in recovery mode. What to do?
My daughters iPod touch stopped working today. It has a picture of an USB cable pointing to the blue iTunes icon. IMac says it needs to be restored and I don't want to lose her content on the iPod. What to do?
-
Best solution for 2+ monitors CS6
After reading discussions about the flaws of external hardware (matrox, BM, AJA) - or at least the drivers needed, I want to find the right solution for using two computer monitors for my Workspaces and a third (HDMI or HD SDI) output for a 37-inch p