Reciver Axis adapter error
Hi,
My interface is RFC to Webservier synchronous here i am iusnig SOAP Axis adapter for NTLM authentication.
I am getting the below error in my receiver SOAP Axis adapter
Information MP: processing local module localejbs/AF_Adapters/axis/HandlerBean
12.01.2012 08:12:39.287
Error MP: exception caught with cause org.xml.sax.SAXException: Bad envelope tag: html
Thank you
Srinivas
Hi Srinivas,
Try having a look at this [OSS Note 1039369 - FAQ XI Axis Adapter|https://websmp130.sap-ag.de/sap(bD1wbCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1039369]. You will find an FAQ for Axis Adapter there. Also, see a similar thread here: Error in SOAP Sender Communication Channel.
Hope this helps,
Grzegorz
Similar Messages
-
Hi,
I'm sending data from databse table to sap.I've create one ztable in sap and assign in tables staement in functionmodule.i wrote sourcode is
insert ZPERNR_POS from table intra.
sender side jdbc shows green colourand also rfc shows green color,but message shows wait status and it shows following error
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling ZINTRA_SAP_REPORTING in remote system (RfcClient[reciever_sap]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: The ABAP/4 Open SQL array insert results in duplicate database records. records in the data base.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling ZINTRA_SAP_REPORTING
Pls help me.Hi Ravi
First check the data in R/3 itself and test whether you can send data inside.
Check with your RFC FM it is remote enabled or not and your schema for imported RFC is fine or not. Else it will not invoke the RFC FM at R/3
Thanks
Gaurav -
Error while passing URL Dynamically in SOAP AXIS adapter..!!
Hi ,
Idoc> XI>SOAP-AXIS
I am doing a scenario where I need to pass the URL dynamically in SOAP-AXIS adapter by taking the RCVPRN of Idoc.
If
RCVPRN = 100 , message has to go to http://10.190.25.16:8210/file/receiver
RCVPRN = 200 , message has to go to http://10.190.25.16:8210/file/receiver2
RCVPRN = 300 , message has to go to http://10.190.25.16:8210/file/receiver3
I used the below UDF and it is working correctly and generating the URL dynamically .
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keyHeader1 = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/SOAP", "TServerLocation");
conf.put(keyHeader1, a);
return "";
The value is coming in SOAP document as expected like below.
<sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:Record namespace="http://sap.com/xi/XI/System/SOAP" name="TServerLocation">http://10.190.25.16:8210/file/receiver3</sap:Record>
</sap:DynamicConfiguration>
I used the below Configuration modules in receiver SOAP-AXIS adapter as suggested in Note 1028961.
AF_Adapters/axis/AFAdapterBean ---> afreq
AF_Adapters/axis/HandlerBean ---> xireq
AF_Adapters/axis/HandlerBean ---> dc
AF_Adapters/axis/HandlerBean ---> remover
AF_Adapters/axis/HandlerBean ---> trp
AF_Adapters/axis/HandlerBean ---> xires
AF_Adapters/axis/AFAdapterBean ---> afres
xireq -> handler.type-> java:com.sap.aii.axis.xi.XI30OutboundHandler
dc -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
dc ---> key.1 ---> write http://sap.com/xi/XI/System/SOAP TServerLocation
dc ---> location.1 ---> context
dc ---> value.1 ---> transport.url
remover ---> handler.type ---> java:com.sap.aii.axis.soap.HeaderRemovalHandler
remover ---> namespace ---> http://sap.com/xi/XI/Message/30
trp ---> handler.type ---> java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
trp ---> module.pivot ---> true
xires ---> handler.type ---> java:com.sap.aii.axis.xi.XI30OutboundHandler
and I am getting the below error in SOAP-AXIS channel at the point java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender.
2009-03-02 15:23:44 Success Axis: getting handler trp of java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
2009-03-02 15:23:45 Error Axis: error in invocation: (500)internal server error
2009-03-02 15:23:45 Error MP: Exception caught with cause (500)internal server error
2009-03-02 15:23:45 Error Exception caught by adapter framework: (500)internal server error
2009-03-02 15:23:46 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: (500)internal server error: (500)internal server error.
2009-03-02 15:23:46 Error The message status set to NDLV.
Kindly let me know if anyone has any idea what might be wrong?
Note : The given URL is correct one because I cross checked by passing them normally by giving directly in adapter and they are all working and the message is going to receiver.
Thanks
DeepthiHi Stefan,
>> dc -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
>> dc ---> key.1 ---> write http://sap.com/xi/XI/System/SOAP TServerLocation
>> dc ---> location.1 ---> context
>> dc ---> value.1 ---> transport.url
>> Try read instead of write
When I tried with this, I am getting the below error "Connection refused ".
Success Axis: entering HandlerBean
Success Axis: getting handler trp of java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
Error Axis: error in invocation: java.net.ConnectException: Connection refused
Error MP: Exception caught with cause java.net.ConnectException: Connection refused
Error Exception caught by adapter framework: ; nested exception is: java.net.ConnectException: Connection refused
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: ; nested exception is: java.net.ConnectException: Connection refused: java.net.ConnectException: Connection refused.
Success The message status set to WAIT.
It is going successfully when I tried sending directly. Looks like Dynamic Configuration is not working for SOAP-AXIS.
Any Suggestion?
Thanks
Deepthi. -
Error in Sender AXIS adapter with UsernameToken
Hello,
I'm trying to implement a web service with UsernameToken authentication (legacy >PO>ECC), after research in this forum, some blogs and notes, I've found this approach: Axis Adapter Sender Comm Channel with usernameToken .
I did all steps, but everytime I try to consume the web service, it doesn't work and I get the following error in default trace:
No application classloader can load login module class: com.sap.engine.services.security.server.jaas.DigestLoginModule. Probably application that deployed the login module is stopped and cannot be started.
My system is PO 7.4 SP5.
Do you have any idea?Hi,
May be below links will help you
1. /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
2. Have you used method of ConnectionFactory also??
3. 804102
xi 3.0 mail adapter with pop3 user authentication problem
4. 810238
XI 3.0 Mail Adapter for POP3 may not report some errors
Thanks
Swarup -
faultstring SOAPAction /faultstring --- Error in Axis Adapter
Hi All,
I am doing an sender https scenario. My end customer uses ariba to send messages to XI. They dont want to use username and pwd to send the document. So we have eliminated the soap adapter (because it asks for username and pwd to send the request). Now we are using axis adapter (where we have removed the user and pwd paramters in axis adapter itself). So it dont ask for username and pwd anymore for any of the axis comm. channel.
Now the issue is when we send a https request to my url(I have created wsdl using xI and took the url from it) using SOAP UI I am able to get it into xi. But when they use ariba or Fiddler (we can download free for testing) they are getting an error message like:
<soapenv:Body>
<soapenv:Fault>
<faultcode xmlns:ns1="http://xml.apache.org/axis/">ns1:Client.NoSOAPAction</faultcode>
<faultstring>SOAPAction</faultstring>
<detail>
<ns2:stackTrace xmlns:ns2="http://xml.apache.org/axis/">SOAPAction
at com.sap.aii.adapter.axis.web.ServletReceiverCore.getSoapAction(ServletReceiverCore.java:665)
at com.sap.aii.adapter.axis.web.ServletReceiverCore.doPost(ServletReceiverCore.java:273)
at com.sap.aii.adapter.axis.web.MessageServlet.doPost(MessageServlet.java:392)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
When I researched this it seems xi is expecting a soap action. But they dont have an option to add the soap action on their side. Now I am struck what to do.
When I googled for this error, it seems it is not error with xi, it is with the apache axis itself. It seems like by default apache axis expects a soapaction and if we dont want to send then we need to give soapaction as "" (which is null). I dont know where to give this. I assume that we need to change the jar file somewhere on axis adapter. No idea where it is and what to do with this approach.
Also I have seen stefans weblog:
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
With this first I need to create an https abap port. Then I can use soap adapter directly by sending username and pwd directly to the url. But the catch here is also to send soapaction which in our case is not possible.
Can anyone of you please help me out.
Regards,
---SatishSatish,
I think the easiest solution is to
1. configure https on the ABAP stack: in trx STRUST you can use the same SSL certificate used to setup SSL in the KeyStorage service of V.A. so that calling the ABAP http or the J2EE http will be copletely transaprent to your SSL client (i.e. ARIBA)
2. use HTTP plain adapter ( <host>:<abap_https_port>/sap/xi/adapter_plain )
- you get rid of the SOAP envelope and SOAP action issue, as the XML payload posted by Ariba will be immediately treated as a PI message payload
- here also you can use the same two parameters as per Stefan's blog (&sap-user=<username>&sap-password=<password>) and thus get rid of the authentication issue.
Stuff sent to the plain_adapter is handled by the CL_HTTP_PLAIN_INBOUND class (use trx SE24 to take a look) and method IF_HTTP_EXTENSION~HANDLE_REQUEST: there are a number of parameters that can be supplied by the client calling it (i.e. Ariba). See below an excerpt.
* call-syntax: XI 3
* http://hostname:port/path
* ?namespace=???
* &interface=???
* &service=???
* &party=???
* &agency=???
* &scheme=???
* [&qos= EO|BE|EOIO]
* [&msgguid=???]
* [&queueid=???]
* [&trace=[1|2|3]]
I am strongly convinced that this is the far easiest solution. Programming Axis handlers can be tricky though fascinating (I've written a nice one I'll probably blog about as soon as I get a chance.) But I will nevertheless try to simulate your Axis issue when I get access to a machine like your own.
Cheers,
Alex -
Hi Experts,
We are required to send a message through PI 7.31 (single stack) in a Soap-to-Soap scenario connecting to a Soap 1.2 Web Service.
We are getting a Security Context Token expired or Invalid error.
Please help us resolving this error.
Thanks in advance!
The Channel Configurations are as follows:
Processing sequence:
Module configurations:
1.
2.
3.
4.
Best Regards
VikramHi all !
First of all, thanks for your answers..
Stefan Grube:
Itu2019s not a Adapter Module.
The module tab following configuration
Processing Sequence:
AF_Adapters/axis/AFAdapterBean Local Enterprise Bean afreq
AF_Adapters/axis/HandlerBean Local Enterprise Bean xireq
AF_Adapters/axis/HandlerBean Local Enterprise Bean trp
AF_Adapters/axis/HandlerBean Local Enterprise Bean dcres
AF_Adapters/axis/HandlerBean Local Enterprise Bean xires
AF_Adapters/axis/AFAdapterBean Local Enterprise Bean afres
Module Configuration
xireq handler.type java:com.sap.aii.axis.xi.XI30OutboundHandler
trp handler.type java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
trp module.pivot true
xires handler.type java:com.sap.aii.axis.xi.XI30OutboundHandler
How can i know if those values are correct ?
Srinivas Reddy:
Thanks for the documentation
I have applied SAP Note 11016021 and the error changed, now it says:
Axis: fatal error in invocation: java.lang.NoSuchMethodError: com/sap/aii/axis/xi/XIUtils.setOperation(Ljava/lang/String;Lorg/apache/axis/MessageContext;)V
Message processing failed. Cause: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
Edited by: Antonio Guzman on Jul 9, 2008 5:29 PM -
Axis adapter : Bad Request error
Hi,
I have a File to SOAP scenario (PI 7.0) where I am using AXIS adapter in the receiver SOAP adapter for NTLM authorisation. In the xml that I am trying to post, i have characters like & because of which I am getting a Bad Request error. Is there a way to resolve this? thanks!
Regards
PushpinderIn file sender channel, i am using binary mode, so no encoding specified.
I see the error in the receiver SOAP adapter -
Error Axis: error in invocation: (400)Bad Request
Error Exception caught by adapter framework: (400)Bad Request
Error MP: Exception caught with cause (400)Bad Request
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: (400)Bad Request: (400)Bad Request.
Error The message status set to NDLV. -
Hi
I am not able to access the axis adapter framework like i.e. (http://host:port/XIAxisAdapter/MessageServlet)
When am trying to access i am the following getting error.
Error:
404 Not Found
The requested resource does not exist.
Please provide me solution for this?
Regards
Osman Abdul Aziz JabriHi Osman,
Kindly check this note:
#1039369 - FAQ XI Axis Adapter
It may helps with most common issues and doubts.
Regards,
Caio Cagnani -
Exchange rate SAOP-AXIS adapter - SAP PO 7.4
Hi Expert,
My requirement is to fetch exchange xml file from web link : http://www.nationalbanken.dk/DNUK/rates.nsf/rates.xml . I have gone through Michael blog: http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/01/05/michals-pi-tips-exchange-rates-from-an-xml-file-on-a-web-page--rest-axis
And I have done everything same but nothing happening to sender adapter.
It is showing running but no log updated.
I am working SAP PO (Process Orchestration) 7.4 SP3.
I have gone through ......../XIAxisAdapter/MessageServlet and it show below details:
Axis Adapter Message Servlet
Component Versions
Adapter Common Library Version: 1.7.4003.20130911141725.0000, NW731EXT_08_REL (2013-09-11T18:40:12+0000)
Adapter Application Version: 1.7.4003.20130911141725.0000, NW731EXT_08_REL (2013-09-11T18:40:22+0000)
Axis Version: ???
Required Components
Apache-Axis
Error: required component missing --- looking for org.apache.axis.AxisEngine in com.sap.aii.af.axisproviderlib/axis.jar; see http://ws.apache.org/axis/
Jakarta-Commons Discovery
Error: required component missing --- looking for org.apache.commons.discovery.Resource in com.sap.aii.af.axisproviderlib/commons-discovery.jar; see http://jakarta.apache.org/commons/discovery/
Jakarta-Commons Logging
Error: required component missing --- looking for org.apache.commons.logging.Log in com.sap.aii.af.axisproviderlib/commons-logging.jar; see http://jakarta.apache.org/commons/logging/
Optional Components
Thanks in advance!
KumarHI Amit,
I see status as error:
Required Components
Apache-Axis
Error: required component missing --- looking for org.apache.axis.AxisEngine in com.sap.aii.af.axisproviderlib/axis.jar; see http://ws.apache.org/axis/
Jakarta-Commons Discovery
Error: required component missing --- looking for org.apache.commons.discovery.Resource in com.sap.aii.af.axisproviderlib/commons-discovery.jar; see http://jakarta.apache.org/commons/discovery/
Jakarta-Commons Logging
Error: required component missing --- looking for org.apache.commons.logging.Log in com.sap.aii.af.axisproviderlib/commons-logging.jar; see http://jakarta.apache.org/commons/logging/
Number of Missing Components: 3
Status: Error
Thanks,
Kumar -
Issue with Sender AXIS Adapter while XML Signing
Hi all,
We are working on a scenario, an external application pushes message to Sender AXIS Adapter in PI. However while testing XML signing we are getting below error:
<faultcode>soapenv:Server.generalException</faultcode>
<faultstring>WSDoAllReceiver: security processing failed; nested exception is:
org.apache.ws.security.WSSecurityException: The signature or decryption was invalid</faultstring>
<detail>
Could you please provide your valuable inputs on this?
Thanks,
JayaHi Jaya,
Have you checked if your message is valid? Have you tested it against another server?
Which version of wss4j are you using and which PI version?
How does your module/handler configuration looks?
If the message is valid and the handler is configured correctly, you can set the trace level of org.apache to debug and see what it says.
Best regards, Yza -
Problem with Dynamic Configuration in SOAP-AXIS adapter..!!!
Hi ,
Idoc> XI>SOAP-AXIS
I am doing a scenario where I need to pass the URL dynamically in SOAP-AXIS adapter by taking the SNDPRN of Idoc.
If SNDPRN = 100 , message has to go to http://10.190.25.16:8210/file/receiver
SNDPRN = 200 , message has to go to http://20.180.26.16:8210/file/receiver
It is working correctly when I tried for single receiver. When I' tried to use DynamicConfiguration, it is coming in SOAP document but it is not working and not passing to correct channel. According to this note 1039369, I mentioned the following modules.
AF_Adapters/axis/AFAdapterBean ---> afreq
AF_Adapters/axis/HandlerBean ---> xireq
AF_Adapters/axis/HandlerBean ---> dc
AF_Adapters/axis/HandlerBean ---> remover
AF_Adapters/axis/HandlerBean ---> trp
AF_Adapters/axis/HandlerBean ---> xires
AF_Adapters/axis/AFAdapterBean ---> afres
xireq -> handler.type-> java:com.sap.aii.axis.xi.XI30OutboundHandler
dc -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
dc ---> key.1 ---> write http://sap.com/xi/XI/System/SOAP TServerLocation
dc ---> location.1 ---> context
dc ---> value.1 ---> transport.url
remover ---> handler.type ---> java:com.sap.aii.axis.soap.HeaderRemovalHandler
remover ---> namespace ---> http://sap.com/xi/XI/Message/30
trp ---> handler.type ---> java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
trp ---> module.pivot ---> true
xires ---> handler.type ---> java:com.sap.aii.axis.xi.XI30OutboundHandler
and I am getting the below error in SOAP-AXIS channel
Error Axis: error in invocation: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error MP: Exception caught with cause java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error Exception caught by adapter framework: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Kindly let me know if anyone has any idea what might be wrong?
Thanks
DeepthiI have a similar problem. I also like to add some header fields to my message und that's way I'm trying to use the AXIS adapter. (Axis adapter FAQ question 30) Unfortunately I'm getting exactly the same error message:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Deepthi, you wrote that you have missed one jar file. Can you remember which file it was? -
Receiver Axis Adapter to 3rd party webservice
Hi,
My scenario is ABAP Proxy --> PI --> 3rd party webservice using Soap Adapter with Axis protocal.
I'm getting the following error when attempting to post to the 3rd party web service:
nested exception is: java.net.SocketException: Connection timed out:could be due to invalid address
We do have to go through a proxy server to go outside the firewall. I'm not sure if this may be the issue, but I don't even see where you can set this in the AXIS adapter.
Can anyone shed some light on the topic?
Thanks and regards,
DukeConfigured as stated below, and the issue was resolved.
How can I call some service over an HTTP proxy server?
The Axis's standard and adapter's HTTPSender and CommonsHTTPSender handlers recognize the java's standard network properties (http.proxyHost, http.proxyPort, http.nonProxyHosts) for HTTP proxy setting. Please check that these System properties are correctly set at the J2EE server's System properties page. For more information on how to set Java System properties, please refer to the J2EE server's documentation (SAP Note 710146 How to change J2EE Engine JVM Settings).
Thanks and regards,
Duke
Edited by: Duke on Aug 5, 2010 5:37 PM -
Issue with SOAP receiver AXIS adapter
Hi All,
We have a scenario SOAP -- > PI -- > SOAP (axis) using SOAP 1.2 version synchnrous scenario. Using Webservice navigator am trying to trigger a message to PI .
Message has reached to PI box and failing in the receiver SOAP(axis) channel as :
Delivering to channel: Receive_SOAP_BulkFeedback 18.08.2014 10:33:24 Information MP: processing local module localejbs/AF_Adapters/axis/AFAdapterBean 18.08.2014 10:33:24 Error
MP: processing local module localejbs/AF_Adapters/axis/AFAdapterBean
MP: processing local module localejbs/AF_Adapters/axis/AFAdapterBean 18.08.2014 10:33:24 Error MP: exception caught with cause javax.ejb.EJBException: ASJ.ejb.005043 (Failed in component: sap.com/com.sap.aii.axis.app, BC-XI-CON-SOP) Exception raised from invocation of public com.sap.aii.af.lib.mp.module.ModuleData com.sap.aii.adapter.axis.modules.AFAdapterBean.process(com.sap.aii.af.lib.mp.module.ModuleContext,com.sap.aii.af.lib.mp.module.ModuleData) throws com.sap.aii.af.lib.mp.module.ModuleException method on bean instance com.sap.aii.adapter.axis.modules.AFAdapterBean@6bbad627 for bean sap.com/com.sap.aii.axis.app*xml|com.sap.aii.adapter.axis.ejb.jar*xml|AFAdapterBean in application sap.com/com.sap.aii.axis.app.; nested exception is: java.lang.NullPointerException: while trying to invoke the method com.sap.aii.af.lib.mp.module.SModule.process(com.sap.aii.af.lib.mp.module.ModuleContext, com.sap.aii.af.lib.mp.module.ModuleData) of an object loaded from field com.sap.aii.adapter.axis.modules.AFAdapterBean.core of an object
Please help and suggest.Hi Raja,
The end system is closing the communication. Try to reset your PI ICM instance. Also check if your PI system is affected by this note 1675953 - SSL Client Authentication failed with PI SOAP Axis Adapter
Regards. -
SOAP Action missing in Axis adapter
Hi,
I am not able to send data to a Web Service using Axis Adapter (SOAP 1.2) and getting an error of "SOAP Action is missing". Can see that SOAP action is missing in the SOAP message sent to Web Service. Communication channel is configured with SOAP Action.
Am on PI 7.10 SP6.
Any help is appreciated!!
Thanks
KiranHello,
I tink you are using receiver SOAP Communication channel... Ask your client to provide the same... because.... your message will be processed at receiver side by using SOAP Action at receiver side...
SOAP action is mandatory for SOAP Receiver communication channels...
Thnx
Subbu -
Special Characters issue---u00FA ,u00A3---- in Reciver SOAP Adapter
Hi ,
I am facing issues with Spceial Characters ú ,£ at the reciver SOAP adapter ,the messages was stuk in XI with to the following error :An invalid character was found in text content. Error processing resource
I tried in several ways buy using XMBWS.XMLEncoding=iso-8859-1,
but it was not resloved still I am getting the same error,
Any one plz suggest me how to resolve this issue....
Regards,
Teja.Hi ,
My scenario is RFC--SOAP ,the messages was successfully rached to RFC adapter and I am facing the issue at the receiver SOAP Adapter ......
I am getting error messages such as :
1) 400 Bad Request
2) In the XML Payload ......It is showing as Invalid Character found ....
For this I tried ...
1) In the source payload XML I done the chages in the encodding part
encoding part as iso-8859-1instead of utf-8.
2) I have triggered the message from Integration Engine ....then it was successfully processed through SOAP Adapter
3) with special characters...means there is no issue at target end.
4) the issue lies in XI so we have to resolve it.
I tried by using Adapter paramters which was provided by SAP but the result is same..
so the paramters which was provided by SAP are incorrect(for encoding)
Please help me in resolving this issue .........
Regards,
Teja.
Maybe you are looking for
-
Dynamic select list with more than one value?
I am creating a simple CRUD component for our company's Joomla site. This component allows our users to create discount bundles for our cart according to shopper group and products. I've been using Dreamweaver to author the administrator forms and h
-
Hi All .... i m having problem when i call the method Connection.createStatemen(int,int). it gives the error java.lang.AbstractMethodError. i m calling from inside servlet. same error occures when i call method getRow() of ResultSet. here is all the
-
Hi, We're trying the new 11 Pro and just patched it to:11.0.09 to try to fix this error below. When the user tries to create a PDF from the main menu that now says "Create PDF from File" instead of the old screen that said "Create PDF" ...... If I st
-
Hi, I am doing INIT without data transfer. When I go in monitor and try to see the details I not able to see any thing , its not displaying any of the TABS of monitor like Hedear , Status and Details. When I go to data target and try to open from aga
-
Hi, i am new to forum so excuse me if I'm in the wrong place. My iPad 4 has done the new 7.1 update and the battery life is only half what it was. I see lots are saying the phones have the problem but not so many talking about iPads. Mine is so bad t