Recommend 3rd party viewer?

I'd like to be able to view selected photos, which are not adjacent to one another in iPhoto, as large as I like, and switch rapidly from one to another. iPhoto doesn't do this very well.
I can export them, open them separately in Preview, and that works pretty well.
Is there another 3rd party app that might do this more easily?

iPhoto offers a couple methods. Select the photos, then hit the full screen button, and it will show all selected photos as large as possible.
You could also use a smart album to flip through non-adjacent photos, and shortcuts for keywords to quickly create temporary albums.
Otherwise, setting up an external editor in Preferences is probably easier than exporting. You can set up an external editor, then re-set Prefs to edit in iPhoto, which will let you right-click and choose "Edit in External Editor" when desired. I think you can select a few photos at a time to send to the external editor, but there is a limit, and it may be as low as 4.

Similar Messages

Recommended 3rd party recovery programs

I did recently look through a few of the older topics, but was a little lost as to which program I should choose, as there's so many.
So I'm going to be purchasing a laptop within the week and I need a way to transfer my music on my ipod to itunes (on the laptop). I'm familiar with the manual procedure of locating the hidden files and copying them, but I'm concerned about keeping my play-counts and the such. I've been rifling through a good deal of these third party programs, but some seem a little shifty and complicated. Any real recommended programs that anyone has used succesfully? Thanks in advance.

Hi there,
There are plenty of programs that do this but the only one that is able to completely build your iTunes library from your iPod is CopyTrans http://www.copytrans.net
This tool does not only handle your songs like others do but also your playlists, ratings, play count, album artworks, videos, and podcasts (incl. subscriptions) etc and imports all that to iTunes in the right order and categories.

Recommended 3rd party transfer program

I did recently look through a few of the older topics, but was a little lost as to which program I should choose, as there's so many.
So I'm going to be purchasing a laptop within the week and I need a way to transfer my music on my ipod to itunes (on the laptop). I'm familiar with the manual procedure of locating the hidden files and copying them, but I'm concerned about keeping my play-counts and the such. I've been rifling through a good deal of these third party programs, but some seem a little shifty and complicated. Any real recommended programs that anyone has used succesfully? Thanks in advance.

You might consider instead purchasing an external hard drive (they are pretty cheap right now), copying your iTunes folder to that drive, installing iTunes on the new laptop and then copying the iTunes folder from the external hard drive to the laptop.
This will preserve everything you have and the bonus is you will now be able to easily back up your library in the future.

3rd Party Software for Charting

Can anyone recommend 3rd Party Software for Charting (pie chart, bar chart etc)
I have tried to use the Cold Fusion charts <CFCHART> etc..... but they just dont create professional looking charts.
I bought Fusion Charts.
It worked great for a while.
But the charts dont render on IPADS and now they have printing issues.
So now I have decided to start anew.
I want charting software that outputs to professional looking JPG, GIF or PNG images (NO FLASH!!)
Does anyone have any suggestions for 3rd Party Software for Charting that integrates well with my existing cold fusion pages?

On 2/24/2011 10:07 AM, weezerboy said:
I have tried to use the Cold Fusion charts<CFCHART> etc..... but they just
dont create professional looking charts.
in case you already didn't know, you can go a long way by tweaking the
webcharts3D bits that cf uses for cfchart. look under your cf install for the
cfusion\charting dir. there should be a batch file to start the editor & a user
guide PDF. there's even an eclipse plugin:
http://www.gpoint.com/website/WebCharts50/products/eclipse.jsp
for tricks & tips have a search through ray's blog:
http://www.coldfusionjedi.com/
*Does anyone have any suggestions for 3rd Party Software for Charting that
integrates well with my existing cold fusion pages?*
we have more "sciencey" needs for our charting than cfchart can easily provide &
use jfreechart for most of our apps' graphing.
http://www.jfree.org/jfreechart/
though to get the most of this lib you probably need to cough up $65 US for the
"developer guide".

Document viewer, 3rd party

Hi all, just got a Curve from Tmobile, and have found that Tmobile does not support Blackberry software above 4.2, thus I don't have Documents to Go bundled. Anyone found a 3rd party software to store and view Word documents that they have had luck with?

You can easily upgrade you OS to OS 4.5 from another carrier, while TMo might not support it, it is perfectly fine to do so.
Meanwhile, if you choose not to upgrade, there are options such as eOffice, and Repligo.
However the OS 4.5 upgrade is free!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What is Oracle's recommendation of enabling a 3rd Party application for Online Patching? Is this a requirement with EBS R12.2 or is this something that can be done in phases for e.g.:

Hello -
My Oracle Partner account uses Oracle EBS, Fusion Apps and is in the process of migrating from 10g to 11g; forwarding their question here -
What is Oracle’s recommendation of enabling a 3rd
Party application for Online Patching? Is this a requirement with EBS R12.2 or
is this something that can be done in phases for e.g.
Phase 1: Oracle EBS utilizes Online patching while
the 3rd Party application does not leverage edition based
redefinition for Online patching
Phase 2: 3rd Party application is modified
to leverage edition based redefinition Online patching mechanism.
I would appreciate any insight/recommendations you may have
regarding Online patching for EBS 12.2.

This seems to be related to EBS an may be better answered in the EBS forums as this forum is dedicated to Fusion.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Recommendations for 3rd party AC adapters?

In the year that we've had this powerbook we've gone through 2 Apple brand AC adapters (one broke where the cord meets the brick - smoking! and the other one broke where the cord meets the notebook - sparking!) and we bought a 3rd party replacement from Other World Computing only to have the little pin fall off into the computer's charger port. Twice.
So I'm looking for a well-made (above all else) but hopefully cost effective 3rd party replacement adapter. Recommend away!

Hi,
I got a the MCE PORTABLE AC POWER ADAPTER FOR POWERBOOK G4 in december to use with my 15" g4 1.67. Works great except for no color ring indicating charging it is white though, which matches the original color scheme and for $40 from clubmac.com, it proved to be one of the better deals around at the time I think.
Good Luck!

How can i view excel on my iPhone 5s, with my ipad4 and the same ios7 viewing works without 3rd party App

How can i view excel on my iPhone 5s ?
with my ipad4 and the same ios7, viewing works without 3rd party App

Dude or hot-spur,
Not fishy at all!!!! You really think I would have taken any more of my time to post a bogus rant? We'll no, it is unfortunately all true. I want to hear from anyone who is experiencing such problems not anyone else that wants to put there two cents in. I really don't need anymore hate or negativity. Just people's experiences because I feel like I am the only one having so many problems. Thank you
Yes, I have had some unfortunate bad luck to have so many problems at the same time, but some of them are just things you cannot do on the new OS.
Thank you again

Recommended Plugins, Filters, or 3rd Party Programs for Final Cut Pro?

Can anyone recommend some of the must have plugins, filters, or 3rd party programs that you use with Final Cut Pro? Even if you do not consider it a "must have," but find it useful, I am interested in hearing about it.
Thanks in advance!!!!

try
www.kenstone.net
www.nattress.com
search discussions, there are hundreds of posts

No alarm in auto-lock and passcode lock, 3rd party recommendations?

My iPhone 4S and iPad mini alarms are set to wake up time of 6:30 am every day. I use the built-in Apple Clock app. Both devices are set to auto-lock and passcode lock. A couple of times, I have overslept and have been late for work because the alarms have not sounded. Did this start happening with an iOS update? This is especially irritating when I am away from home and not waking up when family members are up and making noise early, like a backup alarm. Some 3rd party alarm apps will sound when they are left open and the auto-lock and passcode lock are on (always). I would much rather use the Clock since it is part of the Apple bundle of apps. I can't say Clock is "free," because I paid for it with the standard apps. I hope a good substitute third party free app is available, I am willing to try, because I try to avoid throwing good money after bad. Any recommendations?

It should be working regardless of the lock screen. Try deleting all alarms, then re-adding.

Recommend a 3rd party camera app?

Hi,
I was wondering what people's opinions were in reference to using a 3rd party app from the app store for the camera (both photos and vid)...where the app will let you lower the resolution for taking pics and shooting video so you are not forced to use the native setting in iPhone? Not sure why Apple refuses to add this feature and forces everyone to shoot in the highest setting which eats up storage space.
Anyways wanted to see what others used before I decided on which app to go with.
Thanks!

Active Directory should have no effect on your ability to connect to your mail server. Check this out anyway: http://www.thursby.com/products/admitmac.html

Recommendations for 3rd party internal RAID

I have an octo 2.26GHz mac pro.
Interested to hear from anyone who has purchased a 3rd party RAID controller which would satisfy my reqs:
support OS X & Windows -- doesnt need to be at the same time -- so long as I can restripe that's ok.
OS X needs to be SL.
Windows needs to be Server 2008
Onboard cache preferred.
Internal SATA connectors required (i.e. not SAS)
Must support AHCI, NCQ
Must not require BIOS for setup (since the mac doesn't have a BIOS).
Any experience RAID 0 with SSD's preferred., e.g. how many & what read/write/latency are you getting.
TIA

Some people have been happy running 2008 in Fusion, even multiple VMs.
Unless you really need hardware RAID5, you can have and use 5 internal drives, and there are some fine external RAID controllers.
Take a look at the multitude of reviews on AMUG.com

Using a 3rd party router for Multicast

Hi all,
There’s a lot of feedback on this board about using third party routers with Multicast, so we’ve decided to put this information all in the one place for you.
NOTE: the workarounds below haven’t been tested by BT as we do not support 3rd party routers and we do not endorse any of them. Our recommended router remains the Home Hub.
With the above statement in mind, we know that a lot of you do choose to use other routers. The information contained here has come from fellow customers who have given their time to share this information in good faith. Thanks to all of the forum members who have helped make this information available to our community it is a great example of the wealth of information that a community can provide and we hope this encourages users to come back and visit us in the future.
A special mention goes to walkerx who has posted and prompted a lot of the provided information.
Hub configurations in alphabetical order:
Apple Airport Extreme
Put your Airport Extreme into Bridge Mode and turn the Home Hub's wireless off.
[From MartinH's post]
ASUS RT-N66U
You must configure 'Enable VPN + DHCP Connection' to 'No' under the WAN option.
Settings used were:
- Have router on the latest firmware: 3.0.0.4.374.130
- Use the following settings in LAN > IPTV:
- 'Select ISP Profile' = None
- 'Choose IPTV STB Port' = None
- 'Use DHCP routes' = Microsoft
- 'Enable multicast routing (IGMP Proxy) = Enable
- 'Enable efficient multicast forwarding (IGMP Snooping) = Enable
- 'UDB Proxy (Udpxy) = 0
[From sepph's post]
Billion 7800DXL
Router has been reported to work.
[From walkerx's post]
Billion 7800N
Requires you to add another profile (Pure Bridge) to the EWAN port along with the PPPoE profile. Save settings & restart. Also enable IGMP proxy & snooping.
[TimCurtis' post]
DLink Dir 825
If enable multicast you can see the on-demand players but get an IPC6023 error when viewing the test channel (this means poor internet channel quality). This error message comes up even though it works if use the Home Hub 4
[walkerx's post]
Netgear R6300
Netgear R6300, but with the Home Hub 3.0 and 500Mbit Powerline adapters in the picture.
Modem -> HH3 -> R6300 -> Powerline -> 2 x Youview Boxes on other Powerlines.
To do this, configure the Home Hub 3.0 as 192.168.1.1, then disable its wireless and DHCP. Make sure that NAT and UPNP were enabled, and then set it to use the address 192.168.1.254 as a DMZ server.
Then configure the R6300 as the address 192.168.0.1, using the WAN IP address of 192.168.1.254, with 192.168.1.1 as the gateway and DNS server. The R6300 is then connected via WAN port to the HH3 Gigabit port.
In the R6300 settings switch on IGMP.
The above settings allow both YouView boxes to use on demand content and different streaming channels simultaneously, as well as giving the full features of the R6300 such as AC1750 wireless, network printing, and DLNA
[wigglr's post]
TP-Link AC1750
Router has been reported to work.
[zarf2007's post]
TP-Link Archer C7
Router has been reported to work.
[HappySlayerUK's post]
TP-Link TL-WR1043ND
No configuration needed, plug and play.
[walkerx's post]
TP-Link WDR4300 N750
Router has been reported to work.
[aseymour's post]
TP-Link TL-WDR4900 N900
Router has been reported to work, plug and play.
[cactusbob's post]
TP-Link routers in general
How to configure Multicast on TP-Link routers (from the TP-Link website).
One of our posters also found the following:
He found that your router must be able to do the following for Multicast:
For an end user connected via Openreach GEA (FTTC and FTTH)
• The Residential Gateway will support:
– IPoE for multicast traffic and PPPoE for BB traffic;
– VLAN tag ID of 0 or no VLAN tag ID for multicast and BB traffic;
– Fork IGMP requests up multicast and BB paths.
For an end user connected to an MSAN (WBC copper)
• The Residential Gateway will support:
– A dual VC architecture;
– Accept TV Connect multicast traffic on ATM VP/VC 0/35 with IPoE and broadband traffic on ATM VP/VC 0/38 with PPPoE;
– Fork IGMP requests up multicast and broadband paths.
IGMP should v3 and will be in range from 225.0.0.0 to 239.255.255.255
[walkerx's post]
List of routers that do not appear to work:
Draytek 2750n
Linksys EA4500
linksys EA6300
Netgear AC6300
[From Red_Snow's post]
If you use a router that’s not listed here, do a search on the YouView from BT board to see if advice has been posted elsewhere. If it hasn’t, do post your question.
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Thanks for confirming that quails.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

SCUP2011 - SCCM2012 SP1 CU4: 3rd party updates fail to install with SoftDistHashMismatchEvent

We publish 3rd party updates like Adobe Flash, Shockwave, Firefox with SCUP 2011 into WSUS.
These 3rd party updates are imported/synchronized into our SCCM 2012 SP1 (CU4) environment and deployed to the clients/servers.
But all of these 3rd party fail to install. Software Center returns the following error: The software change returned error code 0x80091007(-2146889721).
The standard Microsoft Updates are downloaded and installed without any error.
The 3rd party updates are downloaded by the client, but are deleted after checking the hash because of a hash mismatch (SoftDistHashMismatchEvent).
As shown in the CAS.log:
Submitted CTM job {5ACC812D-2126-4696-A852-AED288B4FEB0} to download Content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 under context System ContentAccess 26-03-2014 22:28:31 5956 (0x1744)
Successfully created download request {4F582B67-EDFC-486A-9762-96572A780CBC} for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 ContentAccess 26-03-2014 22:28:31 5956 (0x1744)
Location update from CTM for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 and request {4F582B67-EDFC-486A-9762-96572A780CBC} ContentAccess 26-03-2014 22:28:32 3548 (0x0DDC)
Download location found 0 - net:http://sccm.mydomain.local:8530/Content/32/04B9361CDC426D2DBC94B90A7BB0172CAE84D532.cab ContentAccess 26-03-2014 22:28:32 3548 (0x0DDC)
Download location found 1 -
http://sccm.mydomain.nl/SMS_DP_SMSPKG$/fea1aeb3-af1a-45aa-b464-4f90422b4720 ContentAccess 26-03-2014 22:28:32 3548 (0x0DDC)
Download request only, ignoring location update ContentAccess 26-03-2014 22:28:32 3548 (0x0DDC)
Download started for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Download completed for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 under context System ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
File 04b9361cdc426d2dbc94b90a7bb0172cae84d532.cab not expected in folder. ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
The content on the local cache location is not available anymore C:\Windows\ccmcache\px. Try downloading later ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Download failed for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 under context System, error 0x80091007 ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Download failed for download request {4F582B67-EDFC-486A-9762-96572A780CBC} ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Raising event:
[SMS_CodePage(850), SMS_LocaleID(1043)]
instance of SoftDistHashMismatchEvent
ClientID = "GUID:93FA6D8A-9689-46F4-BB57-256BE8995A7B";
DateTime = "20140326212832.587000+000";
MachineName = "SERVERNAME";
PackageId = "fea1aeb3-af1a-45aa-b464-4f90422b4720";
PackageName = "fea1aeb3-af1a-45aa-b464-4f90422b4720";
PackageVersion = "1";
ProcessID = 5124;
SiteCode = "A01";
ThreadID = 5956;
ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Successfully raised SoftDistHashMismatchEvent event. ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Error: DeleteDirectory:- Failed to delete Directory with Error 0x00000003. ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Error: DeleteDirectory:- Failed to delete Directory C:\Windows\ccmcache\px.BCWork with Error 0x00000002. ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Releasing content request {4F582B67-EDFC-486A-9762-96572A780CBC} ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
The strange thing is that 3rd party updates are downloaded/installed succesfully when using the Windows Update Control Panel applet, while WSUS and SCCM2012 are installed on the same server!
Our environment uses PKI only for communication/authentication, because we manage multiple untrusted networks
All servers are virtual servers (VMWare ESXi 5.5) with Windows Server 2008 R2 SP1 + latest updates.
I already performed the following trouble-shooting tasks without any success:
- I reinstalled the different Site System Roles.
- Removed the SCCM client from the SCCM database and client and reinstalled
- Removed the anti-virus software
- Redeployed the 3rd party updates
- Replaced the E1000 NICs with VMXNET3 (server and client)
- Ensured no proxy between server and client
- Downloading and installing the 3rd party updates manually from the specified download locations
(e.g.
http://sccm.mydomain.local:8530/Content/32/04B9361CDC426D2DBC94B90A7BB0172CAE84D532.cab or
http://sccm.mydomain.nl/SMS_DP_SMSPKG$/fea1aeb3-af1a-45aa-b464-4f90422b4720) succeeds without a error.
I really don't know what's going wrong.
Is it a bug?

Hi,
I recommend that you try uninstalling the following KB’s.
Run the following command to uninstall:
wusa /uninstall /kb:2735855 /quiet /norestart
wusa /uninstall /kb:2750841 /quiet /norestart
Meanwhile, here's one video for your reference.
Managing Third Party Updates with System Center 2012 Configuration Manager SP1
http://channel9.msdn.com/Events/MMS/2013/UD-B326
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Diagnosing a 3rd party servcie that hangs or stops on it's own

Hi.
I'm encountering some challenges with a 3rd party service that hangs or stops on it's own (and when self-stopping, hangs.) The challenge being that neither it's logs nor the Event Viewer contain any details. It stops logging itself when it hangs or stops and
the event viewer only records that it stopped and/or started, but nothing else.
What is the current recommended method for doing *unattended* dumps on running processes? Most of the tools I am familiar with seem t be obsolete. I've bee trying to search the web, but most of what I have found is related to known issues with specific services
and is of little use.
I'm not expecting anyone to give me a long drawn out list, but if anyone could suggest a link to a web site or even a thread somewhere on these forums that describes a method it would be much appreciated.
Thanks,
Dan

You might try them over here.
Windows Desktop Perfmon and Diagnostic tools forum on MSDN
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Recommend 3rd party viewer?

Similar Messages

Maybe you are looking for