Recommended version on 6509?

Any recommendations of versions to run on a 6509 w/ 2x SUP1A and 2x MSFC2?

Hi,
You need to choose the appropriate image based on your hardware configuration. I recommend you use the hardware/software compatibility matrix.
Access the software advisor link below and select hardware/software option. Enter the modules that you are using in your switch and it would show you the minimum version you need and the recommended version code.
http://tools.cisco.com/Support/Fusion/FusionHCHome.do
HTH,
Sundar

Similar Messages

Adobe Standard 9, windows 7 recommend version?

HI can you please advise what is the recommended version of Adobe Standard 9, our current packaged applicaion is just 9.0.0 & we are rolling out Windows 7.
Thanks

Hi Paul,
You can find the system requirements for Acrobat products here
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-produ cts.html#id_69342
Thanks,
Preran

What is the recommended version for ITS?

HI Experts,
what is the recommended versions for ITS?
We have SAP R/3 4.6c and WAS 6.40 ................what will be the recommened versions ITS for the above said SAP R/3 4.6c and WAS 6.40 combination...........
and also furnish the list of all versions of SAP R/3 ,WAS and ITS........
Higher points will be rewarded for useful inputs........
Thanks in Advance,
Shakthi

ITS 6.20 gets well with 4.7.. There was ITS 6.4 also released but there were some issues.. you can check the ITS release note from
https://service.sap.com/notes for more info.
Hope this helps
rgds

Recommended version of BO 4.1

Hi,
we are using BO4.0 SP7and we are going to upgrade to 4.1 but we don't know which version should we choose.
I read somewhere that SAP recommend some version and SP. Has anybody heard about it?
Or which version do you recommed?
We are going to use 4.1 SP3
Regards

Update version from - to
BIP 4.0 SP7 p2 - BIP 4.1 SP4 p3
DS 4.1 SP2 - BODS 4.2 SP3
IS 4.2 SP3 (new installation)
Issues I got related to BI:
1) IE9 Freezes when trying to schedule reports to destination from BI launchpad, from CMC it works fine.
SAP Support Comment:
According to my investigation, the issue was already identified as a bug of our product and escalated to the development team for investigation. Actually, the fix for this issue already ready but we need to wait the Patch4 of 4.1 SP04 released which is target to relase on 31st Oct 2014, however, the schedule might be change without further notification. So far as we identified, the issue will only happen to IE9, as we tested, the same workflow is work for Chrome.
Work around I took: This happened only to BI launchpad, NOT for CMC, there are only few schedulers that use BI launchpad to schedule reports, they were happy to use Google Chrome instead of IE. So I setup single sign on for Chrome. According to support guy, it didn't happened to all customers just for few.. (I haven't tried the above mentioned patch yet)
Chrome sso kb - 1887193
Firefox sso kb - 1767654
2) APS was split before update, After update, when refresh webi reports got error csEX (WIS 00000)
DSL Bridge aps was missing connectivity parameters, so I added those missing parameters by looking at other related aps
Related kb : 1644361
Issues I got related to BODS:
DS vs BIP/ IPS compatability matrix: 1740516
1) This applies only if you been using DB2 as repository
Installation Guide p24: ds_42_install_win_en.pdf
Ensure that the software has a temporary table space with a page size of 32K
So far we have default page size as 4k, we need to create new database for DS repos and make it default 32k and migrate them manually using .atl files.
Other than these I didn't get any issues, hope this helps !!

OWB Paris: Recommend version of the Database

Hello everybody.
I would like to know which version of the database is recomended to be used with OWB Paris. We want to use the module of this tool that allows to audit the data quality and we don't know if it's necessary to install an specific version of the database (10gR2) or it can be used with 9i.
Thanks in advance

What versions of Oracle database can I use with OWB 10gR2 Beta 3?
- Oracle Database 10gR2
- Oracle Database 10gR1 with 10.1.0.4 patchset applied.
- Oracle9i Database (9.2). Note that some OWB features are only supported on Oracle Database 10g, as detailed in the Release Notes. Oracle Database 10gR1 is strongly recommended for OWB Paris Beta.
Bye
Detlef

WLC recommended version for 802.11n

Hello,
I have to set up a wireless network using 802.11n. I was wondering if the 4.2 version is the best one? Is there any document that tells wich version to use depending on the the configuration we need to set up, for example?
jr94

Hello,
Thanks for your replies. I know that I will only be able to manage 1252 with that version, and it is the model of my AP, so it is ok. But I was wondering if I should better use 4.2 or another train of releases. As 802.11n has been released on 9/11, I do not know if 4.2 is the best one.
jr94

Recommend Versions of XI

I have a SRM,BI and ECC system on WAS 700
Can u suggest what XI version should i go for and y?
XI 7.0 or XI 3.0 will do?
can anyone give me a comparison of the two
Rgds
Aditya

Hi,
Go for PI 7.0.
1. All new features for XI 7.0 are almost same as for XI 3.0 at least till SPS 19.
Some differences are as follows:
     Adapter Enhancements like JMS, JDBC, Oracle-JDBC and CIDX Enhancements
     New Conversion Agent,
     Receiver Determination Enhancements
     Multi mapping
     User defined enhancements
     Unbounded Processes (Integration Processes).
2. One more difference is the ABAP stack (which is 7.0 and not 6.40) but from the developer point of view there is nothing new.
3.     PI 7.0 = XI 7.0 i.e. PI 7.0 can also be called as XI 7.0
4.     For each SP in XI3.0 there is a corresponding SP being released for PI (XI 7.0). A comparison of the service packs in 2004 and 2004s:
In 2004           - In 2004s
SP12 & lower = SP04
SP13 + 14       = SP05
SP15               = SP06
SP16               = SP07
SP17               = SP08
SP18               = SP09
No Major difference as such...
Diff between XI and PI
XI 3.0 vs. PI (XI 7.0)
http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
Re: what is the difference in XI 3.0, PI 7.0, PI 7.1
differnce between SAP-XI and SAP PI
check this blogs too.
Message Mapping Simplified - Part I
/people/sravya.talanki2/blog/2005/08/16/message-mapping-simplified--part-i
Message Mapping Simplified Part II
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Introduction to Context Handling in Message Mapping
/people/riyaz.sayyad/blog/2006/04/23/introduction-to-context-handling-in-message-mapping
Message Splitting Using the Graphical Mapping Tool
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool
New functions in the Graphical Mapping Tool SP13
/people/stefan.grube/blog/2005/12/29/new-functions-in-the-graphical-mapping-tool-xi-30-sp13
Regards,
Sravesh

WLC version support on 6509 WiSM

Anyone know what WLC version is supported on a WiSM running in a 6509?
Currently we are running 4.2.61.0 and i have noticed on the Cisco website that its up to verison 6.x.x.
How can i find out what version our 6509 will support?

The WiSM is supported with a sup720 running 12.2(18)SXF2 or higher, any SXH, or any SXI version. As long as the sup720 is running any of these versions you can run any of the WiSM images posted in the software download page. Any specific interoperabiltiy issues would be listed in the release notes for the controllers.

Recommended JVM Version for ZfS 6.5 SP1 on NetWare 6 SP5 w/NCS

Quick question - what is the recommended version of the NetWare JVM to use
with ZfS 6.5 SP1? I'm running NW6SP5, ZfS65 with SP1 applied, and Tomcat
3.3. Right now I'm using JVM 1.4.2_6 and just wanted to verify there are no
known issues with JVM 1.4.2_6 playing well with ZfS 6.5 SP1. Running on on
a 2 node cluster.I plan to add ZfD 6.5 SP1 to the cluster soon - primarily
for HA inventory services. Thanks in advance for any input.

Ron,
Thanks for the general advice. That's what I thought, but sometimes we
all need a sanity check. Especially when you see java thread death
messages when the distributor starts up :-) Not due to the JVM.
> In General, use the JVM version that shipped at the same time as the
NetWare
> Service Pack you're using.
>
> For NetWare 6 this still gives you the choice between JVM 1.3.x and
1.4.x,
> my preference is the JVM 1.4.2 as it has better performance then the
1.3.x.
> The 1.4.2_6 your using is quit stable, no major issues known.
>
> Ron
>
>
> <[email protected]> wrote in message
> news:MaeMe.444$[email protected]..
> > Quick question - what is the recommended version of the NetWare JVM
to use
> > with ZfS 6.5 SP1? I'm running NW6SP5, ZfS65 with SP1 applied, and
Tomcat
> > 3.3. Right now I'm using JVM 1.4.2_6 and just wanted to verify there
are
> no
> > known issues with JVM 1.4.2_6 playing well with ZfS 6.5 SP1. Running
on on
> > a 2 node cluster.I plan to add ZfD 6.5 SP1 to the cluster soon -
primarily
> > for HA inventory services. Thanks in advance for any input.
>
>

Recommended Oracle version for SAP 4.7 and for BW 3.5

Hi,
where I can find the SAP's recommended version of Oracle for SAP ERP 4.7 and BW 3.5?
Thanks
Message was edited by:
giovanni maria maccioni

Hi,
Recommended would be 10.2.0.2
Oracle has ended the customer care support for 9.2 in July 2007:
Note 925871 - Discontinuation of 'Customer Care Support' for Oracle 9.2
At the same time, SAP customers have a "free" year of Extended Support for Version 9.2.
9.2.0.8 is the latest patch set provided for 9.2. (see note 1021844)
I think that, if you are planning to perform a new installation, it would be better to do it in 10.2

Recommended WCCPv2 Configuration for WAE

Hi Sir,
I have a Catalyst 6509 with redundant Supervisor Engine 720 in a data center. It is hybrid mode (i.e. CatOS and MSFC IOS).
It's connected to an edge WAN router connecting to branch offices. I'm implementing a WAE at the data center to optimize TCP traffic between the various server farms in the data center and the branch offices.
The WAE is L2 adjacent to the Catalyst 6509. The WCCPv2 config of the C6509 is as follows:
ip wccp version 2
ip wccp 61
ip wccp 62
int vla 100
description *** Connection to WAN Router to Branch Offices ***
ip address 172.16.100.1 255.255.255.0
ip wccp 61 redirect out
ip wccp 62 redirect in
int vla 200
description *** Connection to Data Center WAE (L2 adjacent) ***
ip address 172.16.200.1 255.255.255.0
ip wccp redirect exclude in
int vla 10
description *** Server Farm 1 ***
ip address 172.16.10.1 255.255.255.0
int vla 20
description *** Server Farm 2 ***
ip address 172.16.20.1 255.255.255.0
int vla 30
description *** Server Farm 3 ***
ip address 172.16.30.1 255.255.255.0
int vla 40
description *** Server Farm 4 ***
ip address 172.16.40.1 255.255.255.0
router ospf 1
netw 172.16.0.0 0.0.255.255 ar 0
Because it is not known which server farm the remote users need to access to, I do not want to apply inbound redirection on the server farm interfaces. Instead, I'm doing both inbound and outbound redirection on the interface connecting to the edge WAN router. Is my config valid and recommended for production environment?
I came across a note that says:
*** Setting outbound redirection on Cat6k/76xx may lead to 100% CPU on the switch ***
Can anyone verify the above statement?
Thank you.
B.Rgds,
Lim TS

Hi Zach,
My WAE deployment yesterday wasn't a successful one. After I enabled interception on the Cat6509 and the remote WCCP router, I could ping to remote hosts but they could not access to Internet (i.e. TCP apps fail).
I understand this is one of the common issues of misconfiguration of network interception which can lead to traffic being "black-holed", i.e. distant devices are pingable, but no application traffic can pass.
The traffic redirection at data center to its local WAE seems not working fine. I suspect bugs because the current MSFC IOS version [12.2(17d)SXB6] does not meet minimum recommended version for WCCP [12.2(18)SXF5].
In my scenario, I'd like to only optimize traffic between remote segments (e.g. 172.16.90.0/24 & 172.16.91.0/24) and the data center. So I use redirect-list on the Cat6509 as follows:
Data Center Cat6509
ip access-list extended WAAS_ACL
permit ip any 172.16.90.0 0.0.0.255
permit ip 172.16.90.0 0.0.0.255 any
permit ip any 172.16.91.0 0.0.0.255
permit ip 172.16.91.0 0.0.0.255 any
ip wccp 61 redirect-list WAAS_ACL
ip wccp 62 redirect-list WAAS_ACL
int vla 100
description *** Connection to WAN Router to Branch Offices ***
ip wccp 61 redirect out
ip wccp 62 redirect in
int vla 200
description *** Connection to Data Center WAE (L2 adjacent) ***
ip address 172.16.200.1 255.255.255.0
ip wccp redirect exclude in
Data Center WAE
ip default-gateway 172.16.200.1
wccp router-list 1 172.16.200.1
wccp tcp-promiscuous router-list-num 1 l2-redirect mask-assign
wccp version 2
Am I running into Bug ID CSCsh98343? I don't fully understand the workaround. Can you kindly help me?
Thank you.
B.Rgds,
Lim TS

How do I choose and then install the correct version of Adobe Flash Player for my machine?

First thing - My computer - PROCESSOR: Intel Celeron 450 @2.2 Ghz, MEMORY: 4GB, OS: Windows 7 Home Premium SP1 64 bit, BROWSER: IE 9.0.8112.16421
Everything was hunky-dory until the auto-installer updated my version to the Flash Player 11.2 version and that's when it all went downhill. As soon as it installed that version, none of the TV networks, news networks or Hulu recognized that I had Adobe Flash Player. In addition, I could no longer create a blank new tab in IE or use the tools button (the little gear symbol) in the upper right hand of an IE window. Because of the IE problems, I figured it was a problem with IE and went about searching for a solution in that arena. I finally found something at Microsoft that helped me determine if it was an IE problem and went through the various steps. The final step required booting into safemode and trying to replicate the problem. IE worked fine in safemode so, Microsoft determined the problem had to be with outside influences.
After several frustrating attempts with other fixes including virus scanning and firewall settings, the problem persisted. I then un-installed Flash Player per Adobe's instruction and re-installed the recommended 'latest' version. The problem remained. So, when all else had failed I did a full system restore to a point over a month ago, which is prior to the occurence of the problem, while at the same time noting which drivers and programs would be affected. I already had a sneaking suspicion that it was Flash Player because I read the full system requirements for the recommended version that the auto installer was trying to install (see below). I then began updating everything one at a time to see if any of the windows/software/driver updates had any affect on IE. None did until I got to the Adobe Flash Player and updated it.
Now, what I think the problem is: The auto installer ONLY looks at Operating System and Browser to determine which version of Adobe Flash Player is correct. In this regard, my machine should use the latest 11.2 version. HOWEVER, if you look at the full system requirements for the 11.2 versions, you will note that it requires a...... 2.33 Ghz processor! In this regard, 11.2 is NOT the correct version for my machine as it only has a 2.2 Ghz processor. And I think therein lies the problem.
So. I freely admit that I am not a computer expert and am, in fact, so far removed from ever even contemplating wearing such a title that I'm sure all who read this are sitting in your offices having a good laugh at my expense. As such, I welcome anyone and everyone to tell me what I've done wrong and how I should go about fixing it. If my deductions are correct, then could someone please tell me how to choose the correct version for my machine and then tell me how to actually install it on my machine.
I know that this is a long post and I thank you all for your patience and any help you choose to offer me.

Mr. Willener,
Thank you for your reply.
I did un-install and then re-install per the Adobe recommendations which are what you listed in your reply. The problem remained until I did a MS Windows restore to a restore point a month or so ago. The IE problems vanished. However, now I'm using an outdated and unsupported version that is lower than most of the web pages require for their sites, at least the ones I want to view (they all say I need to upgrade my Flash Player which, when I did, put me in this fix).
As to:
Pat Willener wrote:
Usuallyexasperated wrote:
it requires a...... 2.33 Ghz processor!
You can safely ignore that requirement; it is simply not true.
Why would Adobe post a system requirement of 2.33 Ghz for 11.2 if it simply were not true?
Message was edited by: Usuallyexasperated

HT1443 I have a macbook with mac osx 10.5.8 and i have a new hp printer that requires mac osx v10.6 or mac osx v10.7. do i need to upgrade and if so how do i do it and which version should be downloaded

I have a Macbook with Mac OSX 10.5.8 and i have a new hp printer that recommends version 10.6 or 10.7. Do i need to upgrade, what version, and how do I get and install this upgrade? Thanks

Full instructions here:
https://discussions.apple.com/thread/4540761

Advice on upgrading ASA 5510 from version 8.4(4)1

Hello all,
Due to an issue we need to upgrade our ASA. Cisco Support team recommended upgrading to version 8.4.7, but, as we'll upgrade, we'd like to upgrade to version 9.
We still use Cisco VPN Client for Remote Access VPNs so I'd like your advice on which version to install on ASA.
Would you recommend version 9.0.3? 9.1.X?
Thanks in advance,
Igor

We have a pretty huge ASA and ASASM complex, and we are just about finished upgrading from an assortment of 8.4.x, 8.5.x, and 8.6.x installs to 9.1.3 on everything. There is one gotcha on some systems in that there is a file system change or some sort of bug that is fixed in 8.4.5 I think. So you _may_ have to first upgrade to a newer version (8.4.7 would work) before going to 9.1.3.
Our Cisco team has recommended going to version 9.x, and this is supported by recent tickets I've had on our stuff still running on 8.x, as the TAC engineer often says we need to upgrade to version 9.
Four our setup, we had some fatal bugs in 8.4.6 and 8.4.7 that kept us running 8.4.5 for a very long time on some equipment.
Anyway, I would recommend going to 9.1.3, which is one removed from the recently recleased 9.1.4. Our AnyConnect VPN complex has been on 9.1.3 for a few months now with no issues. Be sure to read the release notes thoroughly as 9.x changes some command contexts, new features, etc.
Graham

Which version to use: 8.1.7.3 or 8.1.6.2 ??

What is the recommended version for production level databases 8.1.6.2 or 8.1.7.3 ??
We have a enterprise DB systems running on Solaris 7 and Solaris 8 (SPARC) with lots of JDBC interfaces.
Any pointers ??

the most current release for either 8.1.6 or 8.1.7 is recommended to maximixe bug fixes so you don't "rediscover" them.
First, install the base version (8.1.6.0 or 8.1.7.0)and immediately go to the metalink web site to download the rdbms patchset to get the rdbms as current as possible.
the metalink web site is :
(http://metalink.oracle.com/metalink/plsql/ml2_gui.startup)
Also 8.1.7 has more features and bug fixes than any 8.1.6 version.
some of the new java related 8.1.7 features include :
1) an apache jserv front end with the oracle jsp engine in it. it supports servlets 2.0 and jsp 1.1 code.
2) an oracle servlet engine inside the jvm which supports servlets 2.2 and jsp 1.1
3) the ejb 1.1 spec requiring entity beans be supported while rdbms 816 supports ejb 1.0 spec which only required session beans to be supported.
4) also i recall seeing that the terminal version 8.1.7 will be supported for a much longer time period than an intermediate version like 8.1.6 - so you might delay another rdbms migration by using 8.1.7 now.
while downloading the patchset for your rdbms, you might want to check the metalink "product lifecycle" section for when 8.1.6 goes out of support for your o/s platform.
I believe that rdbms patchset 8.1.7.1 is starting to become available and that rdbms patchset 8.1.6.2 or maybe 8.1.6.3 may be available. (i work mainly with 8.1.7 so i'm not sure about 8.1.6.x)
However, the current patchset version definitely depends on your o/s platform and can be accessed at the metalink web site referred to above.
i hope this helps ...

Recommended version on 6509?

Similar Messages

Maybe you are looking for