Records stuck in rcv_transactions_interface table

RVTTH-115f: Subroutine process_transaction() returned error
Cause: Subroutine process_transaction() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system
-- This is the error meassage in po_interface_errors table for the records stuck in rcv_transactions_interface table. Unable to deliver the receipts made against PO.
Patch as suggested in metalink is already in place. Can someone please me?

Can you do this and let us know the results?
1. Change the Proflle value for RCV: Processing Mode to Batch
2. Change the profile value for RCV: Debug Mode to Yes
3. Perform transaction
4. Run Receiving Transaction Processor
5. Check the log file at the bottom.
6. If you can send the log file,. we can assist.
Also as a clue this error looks like is coming back from Inventory. Please check whether the item controls are correctly setup and item attributes are enabled correctly. Your code combinations are all still enabled that are used in the po distributions and so on.
Thanks
Nagamohan

Similar Messages

Records stuck in Conversion or Inteface process

Hi All,
In conversions, how to handle errored out records stuck in staging table and did not go to Interface table and the records that were stuck in Interface table and did not go to Base table...
What kind of issues we can face in Conversions while converting using Open interface tables or API....
How to handle converting if million records are present...
Any other issues faced while developing and how to handle them....
THanks
Aman

Can you do this and let us know the results?
1. Change the Proflle value for RCV: Processing Mode to Batch
2. Change the profile value for RCV: Debug Mode to Yes
3. Perform transaction
4. Run Receiving Transaction Processor
5. Check the log file at the bottom.
6. If you can send the log file,. we can assist.
Also as a clue this error looks like is coming back from Inventory. Please check whether the item controls are correctly setup and item attributes are enabled correctly. Your code combinations are all still enabled that are used in the po distributions and so on.
Thanks
Nagamohan

Error in rcv_transactions_interface table but no record in po_interface_err

Hi Everyone,
I'm having a issue in receipts interface. I'm inserting data into rcv_headers_interface table and rcv_transactions_interface tables and then doing fnd_request.submit_request of Receiving transaction processor program. The import program completed with normal status , but the status_flag in both the interface tables is 'ERROR' . I tried to get the error message from po_interaface_errors table using interface_header_id of rcv_headers_interface and also using interface_transaction_id of rcv_transactions_interface.
There is no record in po_interface_errors table.
Is there any other table where I need to look for error?
Please help me out.
Thanks
Sunny

Can you do this and let us know the results?
1. Change the Proflle value for RCV: Processing Mode to Batch
2. Change the profile value for RCV: Debug Mode to Yes
3. Perform transaction
4. Run Receiving Transaction Processor
5. Check the log file at the bottom.
6. If you can send the log file,. we can assist.
Also as a clue this error looks like is coming back from Inventory. Please check whether the item controls are correctly setup and item attributes are enabled correctly. Your code combinations are all still enabled that are used in the po distributions and so on.
Thanks
Nagamohan

Insert statement does not insert all records from a partitioned table

Hi
I need to insert records in to a table from a partitioned table.I set up a job and to my surprise i found that the insert statement is not inserting all the records on the partitioned table.
for example when i am using select statement on to a partitioned table
it gives me 400 records but when i insert it gives me only 100 records.
can anyone help in this matter.

INSERT INTO TABLENAME(COLUMNS)
(SELECT *
FROM SCHEMA1.TABLENAME1
JOIN SCHEMA2.TABLENAME2a
ON CONDITION
JOIN SCHEMA2.TABLENAME2 b
ON CONDITION AND CONDITION
WHERE CONDITION
AND CONDITION
AND CONDITION
AND CONDITION
AND (CONDITION
HAVING SUM(COLUMN) > 0
GROUP BY COLUMNS

Need Help : Urgent : Making one of the record Bold in a Table

Hi Frds,
I am new to OAF.......
I am facing the issue that i have to make one of the record bold in a table...........
By using the query, i m trying to display the payslip
It contains the list of Earnings ,Deductions and NetPay amount..........
this is the part of the query........
select payment_date,element_name,arabic_name,val,balance from
select '0' flag,assignment_id,null payment_date,'Payslip for the Month' element_name,to_char(payment_date,'Month-YYYY')arabic_name,
   null val, null balance from xx_payroll_info
where 1 =1
and payment_date = last_day(:2)
and assignment_id = (select assignment_id from xx_people_reporting_info
    where person_id = :1)
union all
select '1'flag,assignment_id,payment_date,element_name,arabic_name,
   value val,null,balance
from xx_payslip_details_mv
where 1 = 1
and payment_date = last_day(:2)
and earn_deduct = ('E')
and assignment_id in (select assignment_id from xx_people_reporting_info)
union all
select '2' flag,assignment_id,payment_date,'Earnings-Total',null,sum(value) val,null
from xx_payslip_detail_mv
where 1 =1
and payment_date = last_day(:2)
and earn_deduct = 'E'
and assignment_id in (select assignment_id from xx_people_reporting_info
       where 1 =1
            and person_id = :1 )
group by assignment_id,payment_date
My Requirement is : I have to make the Payslip For the month of , Date, Earnings-Total into Bold..... How can i do this.... plz... help me out in this......
Thanks &Regards,
Jaya

Hi Jaya,
Set CSS Class property as OraDataText for respectiveb column.
OR
/In Controller PR
                import oracle.cabo.style.CSSStyle;
                CSSStyle customCss = new CSSStyle();
                 customUnCss.setProperty("text-transform","uppercase");
                 customUnCss.setProperty("font","bold 16px \"Trebuchet MS\", Verdana, sans-serif");//# -red
                 OAMessageStyledTextBean styledTextBean =(OAMessageStyledTextBean)webBean.findIndexedChildRecursive("POCommentsItem");
                 if(styledTextBean!=null)
                  styledTextBean.setInlineStyle(customUnCss);
       Thanks,
        Dilip

How to get the last record of an internall table ....

Hi All..
i want to get the last record of an internal table itab, and i want the the value of the last record.

Hi,
     Use describe statment.
data: lv_line type i.
    Describe table itab lines lv_line.
    read table itab into wa_itab index lv_line.
regards,
Santosh Thorat

How to record the records deleted in a table

Hi Experts
I want to run a report as a batch which should deleted the records
which are sysdate - 60 and The report should log the number of records deleted
from each table at End Of Run.
Criteria for selecting records to be deleted are as follows:
1.     ZINT_DATA
u2022     ZINT_DATA.CREATED_ON <= (Today u2013 60 Days)
               and ZINT_DATA.STATUS = u2018OKu2019
So I want to create a table for log history recorded as
Delete Date         Log description
01.01.2008        1500 rows deleted
30.03.2008        2000 rows deleted.
30.04.2008        300 rows deleted.
Eg The table are ZINT_DATA.
The report starts like this
REPORT z_eslp_command.
DATA:
fs_zint_data TYPE zint_data.
DATA:
t_zint_data TYPE
          TABLE OF
                  ZINT_DATA.
START-OF-SELECTION.
SELECT *
   FROM ZINT_DATA
   INTO TABLE t_ZINT_DATA PACKAGE SIZE 10000.
ENDSELECT.
LOOP AT t_zint_data INTO fs_zint_data.
INSERT INTO ZINT_DATA_DEL
      VALUES fs_zint_data.
select count(*) from zint_data_del.
ENDLOOP.
IF sy-subrc EQ 0.
WRITE:
    'DATA INSERTED FROM ZINT_DATA into ZINT_DATA_DEL'.
ENDIF.
But Instead of creating another table , I want only log to be recorded as described.
Thanks
Regards
Piroz

Hi Kiran
See the final modification of the report but I am getting an error as
Field " Corresponding_fields" is unknown, it is neithere in one of the specified tables nor defined by a
DATA statement, but I have already created an internal table itab1 , could you check and revert with the correction.
REPORT ZSD1DELETION                .
TYPE-POOLS:SLIS.
*Used in ZSDI_INTERFACE1 Program.
TABLES:ZINT_DATA_DEL .
*DATA: BEGIN OF ITAB1 OCCURS 0.
*DATA: SL_NO TYPE SY-TABIX.
     INCLUDE STRUCTURE zint_data_del.
*DATA:END OF ITAB1.
DATA: BEGIN OF ITAB1 occurs 0 ,
      MANDT type zint_data_del-mandt,
      ZINT_ID type zint_data_del-zint_id,
      ZINT_TY type zint_data_del-zint_ty,
      CREATED_ON type zint_data_del-created_on,
      KEY_VAL type zint_data_del-key_val,
      SEQUENCE type zint_data_del-sequence,
      STATUS type zint_data_del-status,
      LENGTH type zint_data_del-length,
      RAW_DATA type zint_data_del-raw_data,
      end of itab1.
*DATA: i_data TYPE TABLE OF ITAB1, " internal table
*wa_data TYPE ITAB1. " work area
DATA:LINE1(10) TYPE C,
     LINE2(10) TYPE C,
     date1(10) type c,
     date2(10) type c,
     name1(60),
     string1(100),
     title1(65),
     title2(100) type c,
     FNAME TYPE STRING.
*Declarations for ALV
DATA:itfieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA:itrepid TYPE sy-repid.
itrepid = sy-repid.
DATA:itevent TYPE slis_t_event.
DATA:itlistheader TYPE slis_t_listheader.
DATA:walistheader LIKE LINE OF itlistheader.
DATA:itlayout TYPE slis_layout_alv.
DATA:top TYPE slis_formname.
DATA:itsort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*PARAMETERS:P_WERKS LIKE BSEG-WERKS.
SELECT-OPTIONS: S_DATE FOR ZINT_DATA_DEL-CREATED_ON OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
*Validations w.r.t the Date
AT SELECTION-SCREEN ON S_DATE.
IF S_DATE IS INITIAL.
MESSAGE 'Enter the Date' type 'E'.
*Records from 2007 can't be deleted.
ELSEIF S_DATE-LOW+0(4) >= '2007' AND
       S_DATE-HIGH+0(4) >= '2007'.
MESSAGE 'Records from the Year 2007 cannot be Deleted' type 'E'.
ENDIF.
CONCATENATE s_DATE-low6(2) '.' s_DATE-low4(2) '.' s_DATE-low+0(4)
INTO date1.
CONCATENATE s_DATE-high6(2) '.' s_DATE-high4(2) '.' s_DATE-high+0(4)
INTO date2.
PERFORM GETDATA.
*&      Form DOWNLOAD
      text
--> p1        text
<-- p2        text
form GETDATA.
SELECT * FROM ZINT_DATA_DEL
         INTO CORRESPONDING_FIELDS OF TABLE ITAB1
         WHERE CREATED_ON IN S_DATE.
IF ITAB1[] IS NOT INITIAL.
DESCRIBE TABLE ITAB1 LINES LINE1.
PERFORM DELETION.
PERFORM ALV.
ELSE.
MESSAGE 'No Data' type 'S'.
ENDIF.
endform.                    " GETDATA
*&      Form DELETION
      text
--> p1        text
<-- p2        text
form DELETION .
DELETE FROM ZINT_DATA_DEL WHERE CREATED_ON IN S_DATE.
endform.                    " DELETION
*&      Form alv
      Fieldcatalog for ALV Report
FORM alv.
LOOP AT ITAB1.
ITAB1-SL_NO = SY-TABIX.
MODIFY ITAB1.
ENDLOOP.
DEFINE m_fieldcat.
    itfieldcat-fieldname = &1.
    itfieldcat-col_pos = &2.
    itfieldcat-seltext_l = &3.
    itfieldcat-do_sum = &4.
    itfieldcat-outputlen = &5.
    itfieldcat-edit = &6.
    append itfieldcat to itfieldcat.
    clear itfieldcat.
END-OF-DEFINITION.
m_fieldcat 'MANDT'     '' 'Client' '' 03 ''.
m_fieldcat 'ZINT_ID' ''   'Id' '' 10 ''.
m_fieldcat 'ZINT_TY'   '' 'Type.' '' 05 ''.
m_fieldcat 'CREATED_ON' '' 'Date Created on' '' 25 ''.
m_fieldcat 'KEY_VAL'       '' 'key value' '' 04 ''.
m_fieldcat 'SEQUENCE' '' 'sequence' '' 06 '' .
m_fieldcat 'STATUS'   '' 'status.' '' 10 ''.
m_fieldcat 'LENGTH'    '' 'Length.' '' 18 ''.
m_fieldcat 'RAW_DATA'    '' 'Raw Data' '' 15 '' .
itlayout-zebra = 'X'.
itlayout-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program      = sy-repid
        is_layout               = itlayout
      i_callback_user_command = ' '
        i_callback_top_of_page = 'TOP'
        it_fieldcat             = itfieldcat[]
        i_save                  = 'A'
     is_variant              = ITVARIANT
        it_events               = itevent[]
     is_print                = ITPRINTPARAMS
        it_sort                 = itsort[]
      TABLES
        t_outtab                = itAB1
        EXCEPTIONS
        program_error           = 1
        OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    "alv
*&      Form TOP
    Top of page for ALV Report
FORM top.
   CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
     EXPORTING
        i_list_type           = 0
     IMPORTING
        et_events             = itevent
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
string1 = 'Records from'.
CONCATENATE string1 date1 'to' date2 INTO title1
SEPARATED BY space.
walistheader-typ = 'H'.
walistheader-info = title1.
APPEND walistheader TO itlistheader.
CONCATENATE 'Records Deleted' '-' LINE1 INTO title2.
walistheader-typ = 'H'.
walistheader-info = title2.
APPEND walistheader TO itlistheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary      = itlistheader
    I_LOGO                   = ''.
    I_END_OF_LIST_GRID       =
   ENDIF.
CLEAR itlistheader.
ENDIF.
ENDFORM.                    "TOP
Regrds
Piroz

Count the Records in an internal table without a loop.

How do i count the number of records in an internal table without using the loop statement.
The Describe statement give the total no. of records in the internal table.But i want the count of the key fields in the internal table
For eg
Row Field
1       A
2       A
3       A
4       B
5       B
6       C
Count of A = 3
Count of B = 2
Count of C = 1

Dilip,
I think isn't posible. Only 3 ideas:
1ª, make other table "table2", similar to your actual table.
     table2[] = yourtable[].
     delete table2 where key <> 'A'.
     describe table table2 lines contA.
    But depending the amount of data, you may have problems in performance or memory consumption...
2ª, make other table, only with the keys fields and a count field,
    data begin table2
       key_field1,
       cont type i.
    end data.
   when you append lines to yourdata, make a collect to this table:
    table2-keys = yourtable-keys.
    table2-cont = 1.
   collect table2.
   But only works if you can modify the program where data is appended, and you may be carefull when data is deleted :-(...
3ª if your data if filled in a select, you may fill the table2 of point 2ª, making a similar select but:
   select keyfields count( * ) into table table2
from ...
where (the same you have to fill your original table...)
   group by keys.
But you have the same problem is data is deleted later...
I hope that any of the three is useful for you...
Edited by: Diego Alvarez on Jan 5, 2010 5:09 PM

How to process each records in the derived table which i created using cte table using sql server

I want to process each row from the CTE table I created, how can I traverse from first row to second row and so on....
how to process each records in the derived table which i created using cte table using sql server

Ideally you would be doing a set based processing rather than traversing row by row as thats more efficient. To answer it specific to your scenario we may need more info. Can you explain with some sample data your exact requirement?
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

A sample code to check records of a system table?

hi ABAP4 experts,
We are pretty new at ABAP4. We would be appreciated if you can provide a sample code to check how many records and calculate a total amount for a specific field, e.g., DMBTR in a system table, e.g., BSEG. Note: there is no any selection for this table BSEG, we just want to get the total record count in this table and also the total amount for a specific field e.g. DMBTR in this table.
Do we have to use an internal table to transfer all the records of BSEG into the internal table to get the result?
We will give you reward points!

Hi Kevin,
Using SUM directly in SQL will NOT work for table BSEG because BSEG is pool table. You will get an ABAP error.
"Aggregate functions and the addition DISTINCT are not supported in field lists for pooled and cluster tables".
You need an internal table to transfer all data from BSEG and perform calculation for count and sum.
Concerning about performance running perhaps you can code something like this.
REPORT ZZFLTEST NO STANDARD PAGE HEADING.
TABLES: BSEG.
DATA: CURS          TYPE CURSOR,
      PACKAGE_SIZE LIKE RMCS4-MC_CM_PSIZE VALUE '10000'.
DATA: BEGIN OF I_BSEG OCCURS 0,
        BELNR TYPE BSEG-BELNR,
        BURKS TYPE BSEG-BURKS,
        GJAHR TYPE BSEG-GJAHR,
        BUZEI TYPE BSEG-BUZEI,
        DMBTR TYPE BSEG-DMBTR,
        SHKZG TYPE BSEG-SHKZG.
DATA: END OF I_BSEG.
DATA: TOT_DMBTR TYPE BSEG-DMBTR,
      TOT_REC   TYPE I.
SELECTION-SCREEN BEGIN OF BLOCK B01 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP.
PARAMETERS: P_SIZE LIKE RMCS4-MC_CM_PSIZE DEFAULT '10000'.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK B01.
START-OF-SELECTION.
PACKAGE_SIZE = P_SIZE.
OPEN CURSOR WITH HOLD CURS FOR
SELECT BELNR BURKS GJAHR BUZEI DMBTR SHKZG
FROM BSEG
WHERE BELNR <> SPACE
    AND BURKS <> SPACE
    AND GJAHR <> SPACE
    AND BUZEI <> SPACE.
*Fetch internal table I_BSEG for every 10000 records.
DO.
    FETCH NEXT CURSOR CURS
    INTO TABLE I_BSEG PACKAGE SIZE PACKAGE_SIZE.
    IF SY-SUBRC <> 0.
      EXIT.
    ENDIF.
ENDDO.
CLOSE CURSOR CURS.
LOOP AT I_BSEG.
    TOT_REC = TOT_REC + 1.
    IF I_BSEG-SHKZG = 'S'.
      TOT_DMBTR = TOT_DMBRT + I_BSEG-DMBTR * -1.
    ELSE.
      TOT_DMBTR = TOT_DMBTR + I_BSEG-DMBTR.
    ENDIF.
ENDLOOP.
WRITE: / 'TOTAL BSEG-DMBTR:', TOT_DMBTR,
         / 'TOTAL RECORD:    ', TOT_REC.
END-OF-SELECTION.
Hope this will help.
Regards,
Ferry Lianto

How to display records into a non table base block..

Hi,
Can anybody help me how to display records into a non table base block....
Find below is my coding but it only display the last record in the first line
in the block.
PROCEDURE CREATE_CARTON_QUESTION IS
CURSOR car_c IS
select /*+ rule */ question_id, question_description
from WHOP.QADB_QUESTIONS
where question_category = 'Carton'
and question_active_flag = 'Y';
v_found VARCHAR2(10);
v_status boolean;
v_error      varchar2(150);
v_count number;
car_r car_c%rowtype;
begin
begin
select count(*) into v_count
from WHOP.QADB_QUESTIONS
where question_category = 'Carton'
and question_active_flag = 'Y';
     exception
     when no_data_found then
     v_count := 0;
end;
if v_count > 0 then
for car_r in car_c loop
---populating carton questions
:la_carton.carton_question_id     := car_r.question_id;
:la_carton.carton_question_answer     := 'N';
:la_carton.carton_error_details     := null;
:la_carton.attribute2          := car_r.question_description;
end loop;
end if;
end;
Thanks in advance.
Regards,
Jun

Hi SNatapov,
Thanks for you reply but still I get this error...
FRM-40737 Illegal restricted procedure GO_BLOCK in WHEN-VALIDATE-ITEM trigger.
Please note that I call that program unit in the last field of my control block inside when-validate-item trigger the questions should be display in la_carton block which is my non-base table block.
Find below is the code....
begin
go_block('la_carton');
first_record;
for car_r in car_c loop
---populating carton questions
:la_carton.carton_question_id := car_r.question_id;
:la_carton.carton_question_answer := 'N';
:la_carton.carton_error_details := null;
:la_carton.attribute2 := car_r.question_description;
next_record;
end loop;
end;
Hoping you can help me this problem...
Thanks in advance.
Regards,
Jun

Error while adding records in user defined table

Dear all,
                I am adding a record in user defined table using   .add() method. the code is given below. while adding it raises the following error
"-1[Microsoft] [SQL Native Client] [SQL Server] Conversion failed when converting the nvarchar value '-3 @BG_MAILSETTINGS' to data type int. (CINF). "
All the fields are varchar date type.
            Dim oUDT As SAPbobsCOM.UserTable
            oUDT = oCompany.UserTables.Item("BG_MAILSETTINGS")
            With oForm.DataSources.UserDataSources
                    oUDT.Code = "1"
                    oUDT.Name = "SMTPSERVER"
                    oUDT.UserFields.Fields.Item("U_SERVER").Value = .Item("EDTSMTPSVR").ValueEx
                    oUDT.UserFields.Fields.Item("U_EMAIL").Value = .Item("EDTFEMAIL").ValueEx
                    oUDT.UserFields.Fields.Item("U_PORT").Value = .Item("EDTSMTPPRT").ValueEx
                    oUDT.UserFields.Fields.Item("U_USERNAME").Value = .Item("EDTSMTPUSR").ValueEx
                    oUDT.UserFields.Fields.Item("U_PASSWORD").Value = .Item("EDTSMTPPWD").ValueEx
                    oUDT.UserFields.Fields.Item("U_AUTHENT").Value = .Item("CMBSMTPAUT").ValueEx
                    K = oUDT.Add
                    If K <> 0 Then
                        oCompany.GetLastError(iErrCode, sErrMsg)
                        MsgBox(CStr(iErrCode) & "-" & sErrMsg, vbCritical, "Error")
                        Exit Sub
                    End If
             End with
Could any one please say the solution for this.
Many thanks,
Manikandan.
Edited by: Rui Pereira on Dec 23, 2008 3:49 PM

Dear Manikandan P,
Is there any change and check in stored procedure SBO_SP_TransactionNotification?
Best Regards
Jane Jing
SAP Business One Forums team
Edited by: Rui Pereira on Dec 23, 2008 3:56 PM

How to create a batch by adding a record to any Z Table

Hi Experts,
I am doing online billing info system. I need to quey the NAST table for unprocessed entries. One of the requirement is to create a batch What is meant by creating a batch by adding a record to a Z Table?
If anyone is aware, please tell me how to do it.
Thanks
Dan

I think this is a question you should ask the person that gave you the specs.
Rob

How to get number of records in all user tables in one select

Please advise how to retrieve the number of records in all user tables in one select. I would likt to extract the data to excel file.
Many thanks,
Andrew

You could always analyze the tables:
declare
begin
for X in (select owner, table_name from all_tables
             minus
            select owner, table_name from all_external_tables) LOOP
      dbms_stats.Gather_Table_Stats(X.Owner, X.Table_Name) ;
end loop;
end;
/Then: Select Owner, Table_Name, Num_Rows from All_Tables ;

Record selected in the table control

Hi All,
How do i know the line no of the record selected in the table control.I have declared a table control CONTROLS : t_control1 type tableview using screen 200.But in t_control1-current_line the line no that is stored is always 1.
Thanks,
Rakesh.

in table control property window you have to set that suppose you have set itab-mark as the sel field then it will always be X if you select the field ...
regards
shiba dutta

Records stuck in rcv_transactions_interface table

Similar Messages

Maybe you are looking for