Recover control and data file

hello
i have an oracle database 10GR2 EE on windows server 2003 sp2
the database is in archive log mode
today i lost all control files+ the system datafile
i have a cold backup + a script to recreate the controlfiles
i restored the system datafile from cold backup
but when i run the script to recreate the controlfiles i got this error:
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01189: file is from a different RESETLOGS than previous files
any help is appreciated
thanks

Hi,
Please refer to Metalink Note:121801.1, there is an step by step resolution.
Regards,
Adrian

Similar Messages

Recover database with control and dbf files

Dear all,
How to recover a database whose registery was damaged but it's control and dbf files are still there
Notes there is no dmp files to recover after reinstalling the oracle

Hi,
How to recover a database whose registery was damaged but it's control and dbf files
are still thereWhat do you mean by "registry" damaged? Do you mean Windows Registry?
If you have control files, data files, and online redo log files then you can simply reinstall Oracle Software, create a windows instance (assuming its on Windows) and start the database without any loss.
Regards

EMIEsitelist and EMIEuserlist hidden directories and dat-files

2014-04-05
Cross-posted from
http://answers.microsoft.com/en-us/windows/forum/windows8_1-security/erniesitelist-and-ernieuserlist/00407bd2-e349-423c-a8e5-cb6127840ea5
Original Post dated April 21, 2014
EmieSiteList and EmieUserList
Microsoft Security - Privacy Concerns
I found two unknown directories on my PC in my user profile. I have, so far, been unable to identify what put them there, which process owns them, and when I delete them (using Admin escalated privileges) they come back after a few minutes or immediately
after reboot.
     c:\users\USERNAME\appdata\local\EmieSitelist\container.dat
     c:\users\USERNAME\appdata\local\EmieUserlist\container.dat
     C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
     C:\Users\USERNAME\AppData\LocalLow\EmieUserlist\container.dat
It was time, anyway, so I wiped the drive using factory low-level overwriting and performed a clean install of Windows 8.1 Pro using a freshly downloaded ISO from Microsoft; one with an ESD distribution, written to a new just out-of-the-bedamned-hardshell-plastic
flashdrive..
I just completed the clean install, in this sequence:
Boot to flashdrive and let Windows create partitions then install. Reboot. Check AppData; no folders found.
Activate. Check AppData; no folders found.
Run first Update; install everything except Bing Bar and Desktop.    Check AppData; no folders found. Reboot. Check AppData; no folders found.
Add Feature Windows Media Center. Check AppData; no folders found. Reboot. Check AppData; no folders found.
Run Updates a second time. Check AppData; no folders found. Reboot. Check AppData; no folders found.
Remove MS C++ v12 x86 and x64 installed during Update.    Check AppData; no folders found. Reboot. Check AppData; no folders found.
Download from MSDN (http://msdn.microsoft.com/en-us/vstudio/default) Redistributables MS C++ x86 and x64, 2005, 2008, 2010, and 2012.4 versions, and install in sequence. Check AppData
after each install; no folders found. Reboot after each install and check AppData; no folders found.
Run Updates a third time. Response was No Updates Available. Check AppData; no folders found.
Reboot. Check AppData; all four sub-directories are now present.
These sub-directories and dat-files are not, so far, present in the AppData\Roaming directory.
There is nothing except Microsoft Windows 8.1 Pro WMC and the 10 MS C++ packages installed; and MS Silverlight and AMD (videocard) Catalyst Control Center on the machine. Windows Defender is present but is installed as part of Windows 8 and 8.1;
and its' updates are provided via the MS Update process. All - repeat ALL of these items are provided by Microsoft.
My questions are: What are the Emie directories for; what program created them, and what does the various container.dat files "contain"? And . . . if not absolutely necessary, How do I get rid of them and keep them from coming back?
First attempt at Solution:
Permissions are Full for System, USERNAME, and group Administrators. The USERNAME is the Owner, and Effective Permissions for each of the 3 is Full.
Open Command Prompt (Admin)
C:\Windows\system32>cd\
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
C:\>
BOTH Files and Directories are no longer Hidden. The Directories still show that the files within are READ-Only, but checking the actual file shows that it is no longer R-O.
I then deleted each of the 4 directories and closed Windows (File) Explorer.
After less than 3 minutes reading pages on the internet (at Microsoft's Ask Windows Community), I opened Windows Explorer to check and found that the sub-directories had re-created themselves in both the Local and LocalLow directories.
The container.dat files were back in the Local sub-dir and after another few minutes, also back in the LocalLow sub-dir.
Both the sub-directories and the container.dat files are once again Super-Hidden.
Analysis using Windows utilities and SysInternals and NirSoft tools have not identified which object or process or service owns these objects.
ADDED: My system is a home system, not connected to any work domain via VPN or otherwise. WHY is the Windows Update Team not spending time to implement condition-and-error-checking to ensure that unneeded updates, services, and changes are not made
without the system owner/operator permission? Further, WHY is this particular issue so hard to find info about; what is being kept from customers and why?

Dear sir Shovel Driver,
   About:  EMIEsitelist  and  EMIEuserlist
.., hidden directories and dat-files
Internet Explorer 11 (on Windows 7 and Windows 8.1) provides increased performance, improved security, and support for the modern technologies like HTML5 and CSS3 that power today’s Web sites and services. By adding better backward compatibility with
Enterprise Mode, Internet Explorer 11 now helps customers stay up to date with the latest browser—and facilitates using the latest software, services, and devices.
IE11 Enterprise Mode can be set in the Group Policy Console, or by adding a
Registry setting:
REGISTRY:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer]
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main]
"EnterpriseMode"="Disable"
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main\EnterpriseMode]
Or a edit a Group Policy setting, which you can find under:
[Windows-Key]+[R]->[Run]->Type here:
   gpedit.msc
Press [Enter], with an UAC Warning:
Do you want to allow the following program to make changes on this computer:
gpedit.msc ?
Select/Press: Yes
Go to in the Left pane of the GPedti.msc Window:
  Computer Configuration
  Administrative Templates
  Windows Components
  Internet Explorer
Change / Add at right list, down under:
  "Use the Enterprise Mode IE website list"
Set this option to - whatever you need; Disabled,
Enabled (Default is: Not Configured)
When Enabled, you need to add a list with Web-Sites, Domains or Web-Pages.
This policy setting lets you specify where to find the list of websites you want opened using Enterprise Mode IE, instead of Standard mode, because of compatibility issues. Users can't edit this list.
If you enable this policy setting, Internet Explorer downloads the website list from your location
  (HKCU or HKLM\Software\policies\Microsoft\Internet Explorer\Main\EnterpriseMode),
opening all listed websites using Enterprise Mode IE, Web-Sites are seperated by a sign: "
If you disable or don't configure this policy setting, Internet Explorer opens all websites using Standards mode.
Now to
properly close and conclude this
mystery:
EMIEsitelist and EMIEuserlist
.., are hidden directories and dat-files
Thses directories and dat files are used to store data for the IE11
EnterpriseMode.
It is not a: Virus, neither it is a Trojan, Hoax, KeyLogger or anything else bad.
TECHNET Sources:
Turn on Enterprise Mode and Use a Site List (Deploy):
http://technet.microsoft.com/en-us/ie/dn262703.aspx
What is Enterprise Mode?:
http://technet.microsoft.com/library/dn640687.aspx
If you find this usefull, please Vote at the button
"I Find This Usefull"
Thank you! ;)
Best regards, MPVS
MP|VS

Process Flow ignores name and location for Control- and Log-Files

Hi!
Our OWB Version is 10.1.0.3.0 - DB Version 9.2.0.7.0 - OWF Version 2.6.2
Clients and server are running on Windows. Database contains target schemas as well as OWB Design and Runtime, plus OWF repositories. The source files to load reside on the same server as the database.
I have for example a SQL*Loader Mapping MAP_TEXT which loads one flat file "text.dat" into a table stg_text.
The mapping MAP_TEXT is well configured and runs perfect. i.e. Control file "text.ctl" is generated to location LOC_CTL, flat file "text.dat" read from another location LOC_DATA, bad file "text.bad" is written to LOC_BAD and the log file "text.log" is placed into LOC_LOG. All locations are registered in runtime repository.
When I integrate this mapping into a WorkFlow Process PF_TEXT, then only LOC_DATA and LOC_BAD are used. After deploying PF_TEXT, I execute it and found out, that Control and Log file are placed into the directory <OWB_HOME>\owb\temp and got generic names <Mapping Name>.ctl and <Mapping Name>.log (in this case MAP_TEXT.ctl and MAP_TEXT.log).
How can I influence OWB to execute the Process Flow using the locations configured for the mapping placed inside?
Has anyone any helpfull idea?
Thx,
Johann.

I didn't expect to be the only one to encounter this misbehaviour of OWB.
Meanwhile I found out what the problem is and had to recognize that it is like it is!
There is no solution for it till Paris Release.
Bug Nr. 3099551 at Oracle MetaLink adresses this issue.
Regards,
Johann Lodina.

Can I download the instrument Control and Data Aquisition Device Driver CD for 7.1?

Greetings,
Can I download the instrument Control and Data Aquisition Device Driver CD for 7.1?
I'm trying to find out if I can download
the instrument Control and Data Aquisition Device Driver CD for 7.1. Instead of downloading all the upgrades?
Is there a link to the image file for this CD?
TIA

Sam,
Unfortunately, the Device Driver CD is not available for download. However, your Technical Sales Representative should be able to send it to you (Contact Information).
Spencer S.

Cofiles and data files in trans dir

hi everyone,
We will be doing a lot of transports in a day or in a week. What will happen to the older cofiles and data files in their corresponding directories? will they be removed from trans/data and trans/cofiles automatically or do we need to take back up of these directories?

Actually there are 3 transport profile parameters which can be used to control this:
1. DATALIFETIME
2. COFILELIFETIME
3. OLDDATALIFETIME
Check more here:
http://myadmin.wordpress.com/2007/02/19/sap-r3-correction-and-transport-system/
Also OSS notes: 41732 &312843. They will clear some more concepts.
Regards.
Ruchit.

WLC 7.4.100.0 Mobility group control and data path down

Hi All,
Today i am facing issue with mobility group. i checked and found control and data path is down on foreign controller.I am able to ping anchor controller. Required ports are open on firewall but mping and eping fails. Any idea whats wrong. On Anchor controller, i have 7 foreign controller configured and among these 3 are working fine. Having problem with 4 foreign controller. Previously all are working fine and there is no changes made on network or firewall.

Post output of "show mobility summary" of your Anchor WLC & a non-working WLC. Also "show sysinfo" of those two controllers.
Regards
Rasika

How to transport the CO and DATA file to SAP system

Hello Experts ,
I want to know the procedure to import a transport request into an isolated SAP system ( which is not in the transport route ) using the CO and DATA files .
I know that user should have adminstrator role to do this but i dont know how to do this .
Regards
Vivek

Simply copy the source cofile and datafile from the source system to the target system and then import.
Data file is located at /usr/sap/trans/<sid>/data with format R<transport_number>.<sid> and cofile is located at /usr/sap/trans/<sid>/cofile with format K<transport_number>.<sid>
Copy them to the same location on the target system and then go to STMS -> Extras -> Add -> insert the name of the transport in format <sid>K<transport_number>, this will add the transport to the import queue then just simply import the transport.
Regards
Juan

Does Adobe have a free download for pdf and data files

I cannot open pdf files AND data files with this expensive pc & Windows 7 HELP

Don't know what are "data files", but you can open PDF files using the free Adobe Reader: Adobe - Adobe Reader download - All versions

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

Thanks for the reply.
But this library doesn't contain any sample .cfg and .dat files which can be read and understood. Can you please provide the same?

Tutorials for MVC, Data Controls, and Data Bindings

I am looking for some good tutorials on:
Model View Controller concept
Creating Data Controls from Java Beans
Creating and Using Data Bindings
We are using JDeveloper, but do not want to use ADF as we want more control than ADF offers.
Thanx
Pam

Just curious, what control do you need that ADF doesn't offer you?
If you use ADF, you don't have to use it for every page. You can bind some components on your page using adf directly to your adf data controls, and you can bind other components to your backing beans, and have full control. No reason to throw out adf if there are just a few cases where you need more control.
Btw, do you have a link to a page describing these non adf data controls and data bindings?

SAPDB : Archive the Log and Data files

Hi,
I am running a SAP WAS JAVA on my laptop with SAPDB as the database. Its used for my local developments.
I have 3 log files and 3 data files of 1 GB each. I want to reduce this to 1 log file and 1 data file to free some space on my Laptop.
How can this be done.
Regards,
Shubham

Hi,
well, you should check the current filling level of your database instance to see how large your single data volume should become.
Then, I would recommend you put your db in admin state and make a full data backup.
Then, you would need to do do a recovery with initialization. This is most conveniently done using the newest available version of the Database Manager GUI.
During this process, you should be able to specify your desired new volume setup (please keep the filling level from your the beginning in mind). For the backup to recover, choose the one you just made.
Hope that helps.
Kind regards,
Roland

SQL 2000 Log and data file free space

HI ~ In SQL 2000, are there any tsql I can get the free space of the mdf and ldf file ?

I would like to look into EACH ldf too like SQL 2005 onward using sysfiles
in SQL 2000
DBCC sqlperf(logspace) will just sum all the ldf size.....
Hello,
Below would work in SQL2000.I did not tested it on 2000 ,I dont have 2000 anymore.This will give information for data and log file free space for all databases
exec sp_msforeachdb 'SELECT name ,size/128.0 - CAST(FILEPROPERTY(name, ''SpaceUsed'') AS int)/128.0 AS AvailableSpaceInMB
FROM sysfiles';
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Ipod control and other files not seen in my computer ipod folder

When I plug my ipod in and under "my computer" i select my ipod and the only files that appear are calenders, contacts, data files, notes, photos and xplay music.
How can it Show the rest of the folders?

Ya i figured it out....
1). Be sure Hidden Files and Folders are visible on your computer
- Open My Computer
- Tools>Folder Options
- Switch to the View Tab
- Be sure that Show Hidden Files and Folders is selected

HT201269 how to connect I-phone 5S to a computer to transfer audio and data files

how to connect I-phone 5S to a computer to transfer audio and data files

You asked the same question 20 minutes ago and I answered it then
https://discussions.apple.com/thread/6029247

Recover control and data file

Similar Messages

Maybe you are looking for