Reg: Tabstrip tab text change through program.
Dear all,
I am using tabstrip in my program, my requirement is to change the text of the tab dynamically in the program .
please help me in this regard.
thanks in advance.
Haritha
can u please make it clear that u want to change tab text when u click on any button
or mouse move
regards
anil
Similar Messages
-
E-Recruiting: TEXT change through application configuration
Hi,
When i am replacing texts of different text elements through application configuration(Web dynpro context), I find the spaces preceding and following the text matter being ignored while displaying the same on the front end.
Texts on different lines are shown in a continous pattern, rather than showing in on different lines.
I want to show them as i configure in the application configuration.
Any help is apprreciated.
Thanks,
SureshHello Suresh,
there are basically two ways of changing e-recruiting texts in web dynpro. As most texts are OTR texts, after implementing BAdI BTFR_CONTEXT, you can create customer contexts on the standard otr texts which will replace them in the ui. This was the only solution in BSP ui and is still very popular. The only restriction is that you can only have one alternative text.
If you want to change the standard text in different customer texts as you want to have different descriptions for different target groups you can only use the web dynpro configuration. Unfortunately web dynpro configuration seems to change with every basis support package. At least in e-recruitng there are at 3 or more different ways to change the configuration for fields and roadmaps depending on the SP you use. I know that when we started with web dynpro for e-recruiting you could not change texts longer than ~40 characters and clearing an otr text resulted in the display of the technical name instead of an empty text.
So far I did not met your problem in detail, but it could be a bug. So if you are on an older support package check the service marketplace. If you are on a current sp or cannot find a solution try to open a support message.
If you need a quick fix, check if you can use the OTR context for a interim solution.
Best regards
Roman -
How to Change the customer subscreen tab text in maintanance order ?
Hi all,
I have implemented a screen-exit for maintanance order using IWO10018. it is working fine but the tab text of the added screen is ENHANCEMENT. I tried to change it by creating the text symbols in the program with the screen . But still it is not changing.
Please help me to solve the issue?
Thanks,
Aravind.Refer:
Re: Change tab strip name for ME52N transaction
How to change the name of Customer Tab strip .
Rename Custom tab in IW31 transaction
Check whether you can maintain the tab page title here
transaction spro-investment management-Appropriation requests-control data-specify tab layout for Appropriation reuqests -
Hi Experts,
I have a standard webdynpro screen which has a Tabstrip having different tabs. For one of the tabs in the Tab Strip I want to change the Tab text on certain condition during runtime.
When I check the Tab property, the propery Caption is holding the Text for the Tab. Is it possible to change the text during runtime?
I would need to create and assign an OTR text to make enable the text in other login, so I is it possible to create another caption and bind it during runtime? or anyother option?Srinivas Kalluri wrote:
Is it possible to change the text during runtime?
> I would need to create and assign an OTR text to make enable the text in other login, so I is it possible to create another caption and bind it during runtime? or anyother option?
As the text property of the caption of the Tab is bindable, Yes you can bind it at runtime. As you mentioed it is standard component, you need to use enhancment concepts to do this.
you can create OTR and then use below code,
data: lw_alias TYPE sotr_alias,
lw_otr TYPE string.
data: l_otr type ref to cl_sotr.
IF NOT l_otr IS BOUND.
CREATE OBJECT l_otr.
ENDIF.
lw_alias = 'Z_OTR_TAB_TEXT'.
* Get OTR text
CALL METHOD l_otr->get_text_by_alias
EXPORTING
i_alias = lw_alias
IMPORTING
e_text = lw_otr.
* set single attribute
lo_el_tab_text->set_attribute(
EXPORTING
name = `TAB_TEXT` "TAB_TEXT is attribute having type string
value = lw_otr. ).
Thanks,
Chandra -
Changing Customer Tabstrip Tab in ME53N
Hi,
Has any way to change text in customer tabstrip in ME53N?
I found this tread but the awnser was not clear.
Changing Customer Tabstrip Tab in ME53N and ME23NResolved.
How to change label of tab 'Customer data' in transaction ME53N
I has tried but my problem in language. I adjusted language and work.
Thank's all! -
I just did the photoshop camera raw update and now every time I try to do a text box or change the text the whole program crashes.
All fixed!!! My Aperture wasn't being recognized because it was in a folder. OK, now I can use my camera with Aperture.
-
Hello,
When Firefox theme is changed, it usually changes window appearance, e. g. backgrounds, and sets corresponding text color to contrast with that background. It always used to be like this. For instance, I currently use Sunflower_01 theme which sets blue sky as a background. The tabs text is white, as well as the bookmarks. The white text contrasts very fine with the sky. But the menu items are awfully black, casting dark-gray shadows on the dark-blue sky. The menu remains black regardless of the theme I set.
Of course, it's all fine without any add-ons (light background, dark text), but with a theme enabled, it looks not the way it used to be. I wonder if it can be fixed somehow.
I use Mozilla Firefox 33.0 for Linux Mint (release 13, maya).
Looking forward to your reply.
Regards,
AndreyHello,
Did you install from the repositories? I have found the same problem with Ubuntu 14.04, a workaround is to either use a userChrome.css file, or (in my opinion, the easier route) [https://addons.mozilla.org/en-US/firefox/addon/stylish/ Stylish] extension with a new Style.
See these articles about the userChrome.css file:
* http://kb.mozillazine.org/index.php?title=UserChrome.css
* http://kb.mozillazine.org/UserChrome.css_Element_Names/IDs
If you use the userChrome.css route, you may need to restart Firefox to apply the changes.
See this article for Stylish:
* http://forums.mozillazine.org/viewtopic.php?f=38&t=1570945
To add a new style in Stylish, click on the Stylish tool on your toolbar, then "Write New Style", then "Blank style". Or:
* Tools (or [[Image: New Fx Menu]]) > Add-ons > User Styles > Write New Style
Example code for either one method you choose (you can play around with the colours, but I found this worked nicely for my theme):
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");
/*change size, color, style of text in Menu Bar */
menubar > menu
{color: darkgray !important}
/* Mouse hovering over menu */
menubar > menu[_moz-menuactive="true"]
{color: white !important;}
/* Active/Open menus */
menubar > menu[_moz-menuactive="true"][open="true"]
{color: black !important;} -
A new tab is being opened in Firefox (started only today) when I do any of the following
1. pressing alt+tab when in Firefox
2. pressing tab to change data entry cell in a web page
3. pressing direction keys (any of up - down - left - right)Upgrade Firefox to Firefox 13 (released today) and then try to Reset Firefox. This will fix most problems with Firefox that people experience. [[Reset Firefox – easily fix most problems]]
-
Tab name change in Puchase Order
Hi,
We have added some fields to Purchase Order Customer Sub screen. This added a new tab called "Customer Data" to the transaction. Now I want to change this tab name to something else. Please let me know how can I do that.
There is a similar thread where it was solved but no information on how to do that.
Re: How to change "Customer Data" tab name to some other text in PR(ME52N)?
ThanksHi
If you are using the BADI 'ME_GUI_PO_CUST'. then in "IF_EX_ME_GUI_PO_CUST~SUBSCRIBE".
Assign ls_subscriber-label = Tab Name.
http://wiki.sdn.sap.com/wiki/display/ABAP/DetailedexplanationaboutBADIandthewaystofindtheBADIwithanexample%28ME23n+transaction%29
If you are using the customer exit method then, goto SE38 and enter the program name SAPLXM06 (This can be modified for certain change) and select the logon language changes
goto Text elements, enter 101 as text id and enter the details,
and also enter text id 111, and enter the same details
Save and Activate.
Note : If you maintain the original language and maintain the text elements, then you will not get the changes in tab. So keep this in mind and change.
I have maintained like this in my system
101 Test
111 Test
To check whether the tab text is correct or not, set a break point in program LMEGUIU06 on line no 316 and check.
Shiva -
RE:Tab Strip Change in Org Mgmt Screen
Hello experts,
My Requirment is to change the tab strip name in the PPOME screen,
Thanks.,
Plreddy.Hi
If you are using the BADI 'ME_GUI_PO_CUST'. then in "IF_EX_ME_GUI_PO_CUST~SUBSCRIBE".
Assign ls_subscriber-label = Tab Name.
http://wiki.sdn.sap.com/wiki/display/ABAP/DetailedexplanationaboutBADIandthewaystofindtheBADIwithanexample%28ME23n+transaction%29
If you are using the customer exit method then, goto SE38 and enter the program name SAPLXM06 (This can be modified for certain change) and select the logon language changes
goto Text elements, enter 101 as text id and enter the details,
and also enter text id 111, and enter the same details
Save and Activate.
Note : If you maintain the original language and maintain the text elements, then you will not get the changes in tab. So keep this in mind and change.
I have maintained like this in my system
101 Test
111 Test
To check whether the tab text is correct or not, set a break point in program LMEGUIU06 on line no 316 and check.
Shiva -
Everytime i try to add a text box the program crashes. Why and how do I fix it?
Since I purchased and installed Adobe Photoshop Elements every time I try to add a text box the program crashes. Why and how do I fix it?
TeeKnows wrote:
Debit cards are accepted in the iTunes store.
No longer accepted for NEW accounts, however if a debit card were associated with the account BEFORE this change, they can still be used. -
Short Dump while activating Transformation through Program
HI All,
I am getting short dump while activating - Inactive Transformation through Program RSDG_TRFN_ACTIVATE.
However while i can activate single Transformation but if run without selection, I am getting this dump.
Short Description of Dump -
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_RSAR_FORMULAS==============CP
Application Component BW-WHM-DST
Date and Time
Please Guide.
PrasadHi Prasad,
Have you changed the 'Object Status' from INA to ACT when using the program RSDG_TRFN_ACTIVATE?
You can also refer to the note SAP Note 1030987 - Activation of transformations dumps
regards,
Ashvin -
I run a small nonprofit where one of our staffers uses InDesign to design our documents. I often make small text changes and would rather not have to run them through her all the time. Is there any inexpensive Adobe product that would met me make these small changes, since I don't need the full Creative Suite (or even full InDesign) capabilities?
You say that you want an Adobe product, but you may not be aware that
there are other products that may work for you as well, in particular
DocsFlow or WordFlow (EmSoftware -- no affiliation to me!)
This would allow your designer to export the story to Word or GoogleDocs
where you make your changes -- and he or she then simply updates the
document in InDesign with the press of a button.
Worth looking into. -
Change of program command in piqst00
Hi,
In piqst00 on change of program command student is deregistered in one program and registered in other program it is working fine.but i want update same in CRM also as soon as he user use change of program functionality.
for no seat for program we are maintaining Z table in se11.
we want this table should be updated.Manjunath,
You can see these information in Extended maintenance mode of student file(PIQST10) in registration tab.
Prabhat Singh -
On text change trigger in oracle forms 9
I want to simulate on-text-change trigger similar to the one present in java and other programming languages.
I need this trigger to be invoked when ever we change some text in the textfield.
Is there any way to do this?
I used two text fields to compare the last entered and newly typed based on a timer interval of 3secs
But my problem is Oracle trims the spaces present in the textfield and also highlights the text present in textfield when ever I enter a space....
Scenario : I want to use this trigger and refresh the search results based on the text present in the textfield.
Thanks in advanceTo do the kind of thing you are talking about you will need to implment a Java Bean in your form listen for the changes. Take a look at KeyEvent Java Bean or the Oracle Forms PJCs-Java Beans web site for more information and examples.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Maybe you are looking for
-
To get recent timestamp records from internal table
hi all, i have one requirment i'm storing error messages in one table while creating a sales order basing on timestamp which is of this format yyyy-mm-dd hh:mm:ss (random Number) if i want to see the error messages left i'm getting all the
-
Server admin not accepting hardware id for password
m going crazy here,i have tried for 2 day every which way i could think of to get this to work.iv tried different variations of the fist 8 digits of the serial number as well as the way it is written on the sticker and no luck.i dont believe the logi
-
Controlling background width/height in 3.5
Hello all, I'm stuck on a problem I've been trying to solve in 3.5. I've seen a few solutions in 4.0 and above, but that doesn't help my situation. I want the application background image to maintain its aspect ratio, while still being as large as p
-
How do I import RAW images from Sony NEX 5-R to iPhoto?
I have Mountain Lion 10.8.2 and iPhoto 9.4.2 and have installed Digital Camera RAW compatability update 4.01 but still can't import RAW images from my new Sony NEX 5-R digital camera.. any ideas? I also have Photoshop CS6 - should I import through th
-
Safari pop up locking out my ipad 2
I have a problem with a pop up in safari. It says I've won a free ipad2 and to click ok to claim your prize. I can't seem to get rid of it. The entire screen is locked out and the only option is to click ok. I've tried rebooting and clearing all the