Regardding CAll Transaction where i will get return value

Dear Expert ,
My Requirment is i am Passing parameter to call transaction it is working fine , but
i want to get data which is displayed after calling that transation .
Such as
sel_data-program = 'gp3umn8b57fzlorwxdm2y9lqq7e'.
    sel_data-dynpro = 1000.
    sel_data-dynbegin = 'X'.
    APPEND sel_data.
    CLEAR sel_data.
    sel_data-fnam = 'S_FICTR-LOW'.
    sel_data-fval = fund_cntr .
    APPEND sel_data.
    CLEAR sel_data.
    sel_data-fnam = 'FIPEX-LOW'.
    sel_data-fval = 'OS001' .
    APPEND sel_data.
    CLEAR sel_data.
    sel_data-fnam = 'PAR_01'.
    sel_data-fval = 'BFL' .
    APPEND sel_data.
    CLEAR sel_data.
    sel_data-fnam = 'PAR_02'.
    sel_data-fval = '2010' .
    APPEND sel_data.
    CLEAR sel_data.
    CALL TRANSACTION 'FMRP_3FMB4004' USING sel_data . " AND SKIP FIRST SCREEN.
After Executing this code it calls this code 'FMRP_3FMB4004' with output such as Available budget and etc ...
this out put i want to return through call transaction which i am calling through RFC .
I Dont want to use SUBmit Report .
Regards
Deepak Dhamat .

i have included that program name as a include program name
and accessed that table to get data .
Problem Solved .

Similar Messages

I AM NEW TO BI ,WHERE I WILL GET DETAIL INFO FOR 'USEREXIT'

HI ALL,
I AM NEW TO BI WHERE I WILL GET ALL DETAILS ABOUT USEREXITS.
AND HOW TO WRITE SIMPLE USEREXIT....I.E SOME EXAMPLE RELATED TO IT..

Check this program for Finding User Exit.
Pass the transaction Code in the section Screen of the Program.This program outouts all exits related to TC given in sel screen
Report
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
                               and object = 'PROG'
                               and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
    select single * from trdir where name = tstc-pgmna.
    if trdir-subc eq 'F'.
      select single * from tfdir where pname = tstc-pgmna.
      select single * from enlfdir where funcname = tfdir-funcname.
      select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
      move : tadir-devclass to v_devclass.
    endif.
endif.
select * from tadir into table jtab where pgmid = 'R3TR'
                        and object = 'SMOD'
                        and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
                                   tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
       20(20) p_tcode,
       45(50) tstct-ttext.
skip.
if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
           2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
      select single * from modsapt where sprsl = sy-langu and
                                         name = jtab-obj_name.
      format color col_normal intensified off.
      write:/1 sy-vline,
             2 jtab-obj_name hotspot on,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first   screen.
Cheers,
Manoj.

CIN (country india version patch)---where i will get

Hi,
what is 'CIN (country india version patch),
my system is R/3 IDES 4.7 on NT & SQL,
where i will get, what will be the patch format?
kindly help me
Regards,
swathi-k

Hi,
For your version of SAP, you may need to have SAP IS-U LOCIN 100
It is available at http://service.sap.com/swdc
select 'Search for all Categories' and put CIN in the search text and hit search , you should be able to get all kinds of existing CIN versions.
Check the following notes:
950514 - Overview Note
950350 - Release Strategy (Delivery Dates)
950511 - Installation note
950513 - Support Packages
Regards,
Siddhesh

I have an iMac (the desktop) I've stupidly left the cable you plug the monitor into the wall with there. What are they called and where can I get a new one?

I have an iMac (the desktop) I've stupidly left the cable you plug the monitor into the wall with there. What are they called and where can I get a new one?

Presumably the mains cable, which you can get from an Apple Store.

Where i will get SAPbobsCOM.dll

Hi every body
    Iam very new to ERP. Recently i have started working on Making Add-On for SBO using .net. I got a bit good femiliery with UI, But iam stucked at DI.
   I have instaled SDK. With that i got only SAPbouiCOM.exe. In many samples which i downloaded from net is reffering the SAPbobsCOM.dll.
   Please some body let me know. wether the SDK what i have is older version or what?. Please let me know where i will get SAPbobsCOM.dll
Thanks in Advance
regards

I guess you have more code between
Public oCompany As SAPbobsCOM.Company
and
oRecordSet = oCompany.GetCompanyList
because it can't work like this. It has to be something like
Dim oCompany As SAPbobsCOM.Company
oCompany = New SAPbobsCOM.Company
oCompany.Server = "(local)"
oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English
oCompany.UseTrusted = True
Dim oRecordSet As SAPbobsCOM.Recordset
oRecordSet = oCompany.GetCompanyList

Which network is Oracle using for RAC traffic ? where you will get info ? ?

Hi,
I am using two node RAC on Oracle 10g R2 (10.2.0.3.0) version on SUN Solaris 10 . I want to know "Which network is Oracle using for RAC traffic ? where you will get info "
--Kumar

Hi Kumar,
In 10g, you can query x$ksxpia. If the cluster_interconnect information is stored in OCR (default), you will get
SQL> select INST_ID,PUB_KSXPIA,PICKED_KSXPIA, NAME_KSXPIA,IP_KSXPIA from x$ksxpia;
If you specified the cluster_interconnects parameter in your init.ora:
Columns to look in : INST_ID P PICK NAME_KSXPIA IP_KSXPIA
And also you can use 'oradebug ipc' to see which interconnects the database is using:
SQL> oradebug setmypid
SQL> oradebug ipc
Hope it helps...
Thanks
LaserSoft

Urgent plz,,,where i will get the jface plugin

Hi all,
please help me,
where i will get the jface plugin for elipse,,

JFace is included with the Eclipse SDK. You just need to import it.
Take a look at step 5 in this doc
http://www.eclipse.org/articles/Article-Your%20First%20Plug-in/YourFirstPlugin.html

Where i will get free ebook download about swings

hi
where i will get free ebook download about swings

scroll to the bottom of this link for the 1st edition of Swing - Matthew Robinson, pub. Manning
http://www.manning.com/sbe/

I am using iPad latest model in India.Let me know where I will get accessories in Mumbai, India, I am using iPad latest model in India.Let me know where I will get accessories in Mumbai, India

Dear Sir,
I want to know where I will get accessories for this iPad in Mumbai,India

You can read the warranty yourself here: https://www.apple.com/legal/warranty/

How to get return value from Java runtime.getRuntime.exec?

I'm running shell commands from an Oracle db (11gr2) on aix.
But, I would like to get a return value from a shell comand... like you get with "echo $?"
I use a code like
CREATE OR REPLACE JAVA SOURCE NAMED common."Host" AS
import java.io.*;
public class Host {
public static int executeCommand(String command) {
    int retval=0;
    try {
        String[] finalCommand;
        finalCommand = new String[3];
        finalCommand[0] = "/bin/sh";
        finalCommand[1] = "-c";
        finalCommand[2] = command;
      final Process pr = Runtime.getRuntime().exec(finalCommand);
      pr.waitFor();
   catch (Exception ex) {
      System.out.println(ex.getLocalizedMessage());
      retval=-1;
    return retval;
/but I do not get a return value... because I don't know how to get return value..
Edited by: user9158455 on 22-Sep-2010 07:33

Hi,
Have your tried pr.exitValue() ?
I think you also need a finally block that destroys the subprocess
Regards
Peter

ABAP prog with Call Transaction to SU01 will not add roles in a CUA client

I am modifying a current ABAP program that works in a non-CUA client to hopefully execute in a CUA client. This program performs a Call Transaction to tcode SU01 and adds roles to an existing user. I used tcode SHDB to identify the new BDC commands needed for CUA when using tcode SU01. When executing the program in the CUA client it does not save the roles to the user. There is no error message or abnormal termination.
When I assign the role to the same user that's referenced in my program directly with tcode SU01 it works fine. Its just when I run the ABAP program the role assigment is not retained. I opened a Customer Message with SAP and they referenced OSS Note 93802 and said this was a consulting question. My program is not abending as referenced in Note 93802, it just does not add the role.
Has anyone been able to get this to work in a CUA client?

Hi,
it should be fairly simple to create a new ABAP using the BAPI's related to business object USER. Call BAPI_USER_CREATE1 to create the users, and BAPI_USER_LOCACTGROUPS_ASSIGN to assign roles in a CUA environment. It should go something like this:
[read file with user data into internal table wt_users]
[read file with role assignments into internal table wt_roles]
Loop at wt_users into wa_user.
[create LOGINDATA, ADDRESS and other structures for user in BAPI below, based on the data in wa_user]
call 'BAPI_USER_CREATE1'
exporting
    username                      = [the user name from input file]
NAME_IN                       =
    logondata                     = [structure for logondata]
    password                      = [initial password value]
DEFAULTS                      =
    address                       = [address structure created above]
    [etc.]
if sy-subrc eq 0.
Assign roles for the user
clear wt_activitygroups. refresh wt_activitygroups.
loop at wt_roles into wa_roles where username = wa_user-username.
    [build an internal table, wt_activitygroups, for system/role assignments for the user]
endloop.
    call BAPI_USER_LOCACTGROUPS_ASSIGN
      exporting
        username                      = [the users name]
      tables
        activitygroups           = wt_activitygroups
        return                       = wt_return.
Endloop.
Ideally, you would have two input files: one with the user data (one record per user), and another one containing the data for the BAPI_USER_LOCACTGROUPS_ASSIGN (on the format USERNAME, SYSTEM, ROLENAME); one entry per line. You'd loop at the first table, containing the user data, then create the user, then loop at all entries in the system/role assignment file for the same username, building an internal table of role assignemnts; then call the second BAPI (provided there were any role assignments to assign for that user!)
Hope this makes sense. It's not rocket science really; you can omit most of the parameters of BAPI_USER_CREATE1, and the second BAPI is even simpler. You could consider validating the input data by checking entries in table USRSYSACT, which contains all valid system/role assignments as seen from the CUA system (this table gets updated every time you do a "text compare" from within SU01.
Regards,
Trond

Regarding call transaction and session method???

HI All,
Cud u pls let me know
1. differences between call transaction and session???
2. Is it possible to schedule call transaction in background?? ( all are saying MODE N = background scheduling in call transaction.......but i dont think so)
3. Is it posible to handle multiple transactions in call transaction ? if so,how?
4. Is it posible to handle multiple transactions in session ? if so,how?
5. How can we see the log in session method????

Hi ,
Check this documentation.
About Session method
In this method you transfer data from internal table to database table through sessions.
In this method, an ABAP/4 program reads the external data that is to be entered in the SAP System and stores the data in session. A session stores the actions that are required to enter your data using normal SAP transaction i.e., Data is transferred to session which in turn transfers data to database table.
Session is intermediate step between internal table and database table. Data along with its action is stored in session i.e., data for screen fields, to which screen it is passed, the program name behind it, and how the next screen is processed.
When the program has finished generating the session, you can run the session to execute the SAP transactions in it. You can either explicitly start and monitor a session or have the session run in the background processing system.
Unless session is processed, the data is not transferred to database table.
BDC_OPEN_GROUP
You create the session through program by BDC_OPEN_GROUP function.
Parameters to this function are:
User Name: User name
Group: Name of the session
Lock Date: The date on which you want to process the session.
Keep: This parameter is passed as X when you want to retain session after
processing it or to delete it after processing.
BDC_INSERT
This function creates the session & data is transferred to Session.
Parameters to this function are:
Tcode: Transaction Name
Dynprotab: BDC Data
BDC_CLOSE_GROUP
This function closes the BDC Group. No Parameters.
Some additional information for session processing
When the session is generated using the KEEP option within the BDC_OPEN_GROUP, the system always keeps the sessions in the queue, whether it has been processed successfully or not.
However, if the session is processed, you have to delete it manually. When session processing is completed successfully while KEEP option was not set, it will be removed automatically from the session queue. Log is not removed for that session.
If the batch-input session is terminated with errors, then it appears in the list of INCORRECT session and it can be processed again. To correct incorrect session, you can analyze the session. The Analysis function allows to determine which screen and value has produced the error. If you find small errors in data, you can correct them interactively, otherwise you need to modify batch input program, which has generated the session or many times even the data file.
CALL TRANSACTION
About CALL TRANSACTION
A technique similar to SESSION method, while batch input is a two-step procedure, Call Transaction does both steps online, one after the other. In this method, you call a transaction from your program by
Call transaction <tcode> using <BDCTAB>
Mode <A/N/E>
Update <S/A>
Messages into <MSGTAB>.
Parameter 1 is transaction code.
Parameter 2 is name of BDCTAB table.
Parameter 3 here you are specifying mode in which you execute transaction
A is all screen mode. All the screen of transaction are displayed.
N is no screen mode. No screen is displayed when you execute the transaction.
E is error screen. Only those screens are displayed wherein you have error record.
Parameter 4 here you are specifying update type by which database table is updated.
S is for Synchronous update in which if you change data of one table then all the related Tables gets updated. And sy-subrc is returned i.e., sy-subrc is returned for once and all.
A is for Asynchronous update. When you change data of one table, the sy-subrc is returned. And then updating of other affected tables takes place. So if system fails to update other tables, still sy-subrc returned is 0 (i.e., when first table gets updated).
Parameter 5 when you update database table, operation is either successful or unsuccessful or operation is successful with some warning. These messages are stored in internal table, which you specify along with MESSAGE statement. This internal table should be declared like BDCMSGCOLL, a structure available in ABAP/4. It contains the following fields:
1. Tcode: Transaction code
2. Dyname: Batch point module name
3. Dynumb: Batch input Dyn number
4. Msgtyp: Batch input message type (A/E/W/I/S)
5. Msgspra: Batch input Lang, id of message
6. Msgid: Message id
7. MsgvN: Message variables (N = 1 - 4)
For each entry, which is updated in database, table message is available in BDCMSGCOLL. As BDCMSGCOLL is structure, you need to declare a internal table which can contain multiple records (unlike structure).
Steps for CALL TRANSACTION method
1. Internal table for the data (structure similar to your local file)
2. BDCTAB like BDCDATA
3. UPLOAD or WS_UPLOAD function to upload the data from local file to itab. (Considering file is local file)
4. Loop at itab.
Populate BDCTAB table.
Call transaction <tcode> using <BDCTAB>
Mode <A/N/E>
Update <S/A>.
Refresh BDCTAB.
Endloop.
(To populate BDCTAB, You need to transfer each and every field)
The major differences between Session method and Call transaction are as follows:
SESSION METHOD CALL TRANSACTION
1. Data is not updated in database table unless Session is processed. Immediate updation in database table.
2. No sy-subrc is returned. Sy-subrc is returned.
3. Error log is created for error records. Errors need to be handled explicitly
4. Updation in database table is always synchronous Updation in database table can be synchronous Or Asynchronous.
Error Handling in CALL TRANSACTION
When Session Method updates the records in database table, error records are stored in the log file. In Call transaction there is no such log file available and error record is lost unless handled. Usually you need to give report of all the error records i.e., records which are not inserted or updated in the database table. This can be done by the following method:
Steps for the error handling in CALL TRANSACTION
1. Internal table for the data (structure similar to your local file)
2. BDCTAB like BDCDATA
3. Internal table BDCMSG like BDCMSGCOLL
4. Internal table similar to Ist internal table
(Third and fourth steps are for error handling)
5. UPLOAD or WS_UPLOAD function to upload the data from the local file to itab. (Considering file is local file)
6. Loop at itab.
Populate BDCTAB table.
Call transaction <tr.code> using <Bdctab>
Mode <A/N/E>
Update <S/A>
Messages <BDCMSG>.
Perform check.
Refresh BDCTAB.
Endloop.
7 Form check.
IF sy-subrc <> 0. (Call transaction returns the sy-subrc if updating is not successful).
Call function Format_message.
(This function is called to store the message given by system and to display it along with record)
Append itab2.
Display the record and message.
Check this program for session method using multiple transactions.
Have one BDC_OPEN_GROUP, multiple BDC_INSERT s and one BDC_CLOSE_GROUP.
You should have multiple BDC_INSERT s for multiple transactions.
call function BDC_OPENGROUP.
Build BDC data and cal lBDC_INSERT for transaction 1
Build BDC data and cal lBDC_INSERT for transaction 2
Build BDC data and cal lBDC_INSERT for transaction 3
call function BDC_CLOSE_GROUP.
Check out this sample program
REPORT ztest_report
NO STANDARD PAGE HEADING
                        LINE-SIZE 255
                        MESSAGE-ID ZRASH.
                Internal Table Declarations                          *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
         KUNNR(10),
         BUKRS(4),
         KTOKD(4),
         ANRED(15),
         NAME1(35),
         SORTL(10),
         STRAS(35),
         ORT01(35),
         PSTLZ(10),
         LAND1(3),
         SPRAS(2),
         AKONT(10),
       END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
         KUNNR(10),
         EMSG(255),
       END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
         KUNNR(10),
         SMSG(255),
       END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
       V_TLINES LIKE SY-TABIX,
       "For storing total records processed.
       V_ELINES LIKE SY-TABIX,
       "For storing the no of error records.
       V_SLINES LIKE SY-TABIX.
       "For storing the no of success records.
         Selection screen                                            *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
             V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
         Start-of-selection                                          *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
       TOP-OF-PAGE                                                   *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
         End of Selection                                            *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*&      Form form_uploadff
    Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = LV_FILE
    FILETYPE                      = 'ASC'
      HAS_FIELD_SEPARATOR           = 'X'
    HEADER_LENGTH                 = 0
    READ_BY_LINE                  = 'X'
    DAT_MODE                      = ' '
IMPORTING
    FILELENGTH                    =
    HEADER                        =
    TABLES
      DATA_TAB                      = IT_FFCUST
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
    DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
    DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM.                    " form_uploadff
*&      Form Form_bdcgenerate
    Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
    PERFORM POPULATEBDC USING :
                                'X' 'SAPMF02D' '0105',
                                ' ' 'BDC_OKCODE' '/00' ,
                                ' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
                                ' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
                                ' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
                                'X' 'SAPMF02D' '0110' ,
                                ' ' 'BDC_OKCODE' '/00',
                                ' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
                                ' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
                                ' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
                                ' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
                                ' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
                                ' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
                                ' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
                                ' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
                                'X' 'SAPMFO2D' '0120',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0125',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0130',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0340',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0360',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0210',
                                ' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0215',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0220',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0230',
                                ' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
    CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
    MESSAGES INTO IT_CUSTMSG.
    IF SY-SUBRC <> 0.
*--Populating the error records internal table.
      IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_ERRCUST.
      CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
      IF V_FLAG1 = ' '.
        PERFORM FORM_OPENSESSION.
        V_FLAG1 = 'X'.
      ENDIF.
*--Inserting the error records into already open session.
      IF V_FLAG1 = 'X'.
        PERFORM FORM_INSERT.
      ENDIF.
*--Populating the Success records internal table.
    ELSE.
      IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_SUCCUST.
      CLEAR IT_SUCCUST.
    ENDIF.
*--Displaying the messages.
    IF NOT IT_CUSTMSG[] IS INITIAL.
      PERFORM FORM_FORMATMSG.
    ENDIF.
*--Clearing the message and bdc tables.
    CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
    PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM.                    " Form_bdcgenerate
*&      Form populatebdc
      FOrm to Populate the BDC table.
FORM POPULATEBDC USING    VALUE(P_0178)
                           VALUE(P_0179)
                           VALUE(P_0180).
IF P_0178 = 'X'.
    IT_CUSTBDC-PROGRAM = P_0179.
    IT_CUSTBDC-DYNPRO = P_0180.
    IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
    IT_CUSTBDC-FNAM = P_0179.
    IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM.                    " populatebdc
*&      Form FORM_OPENSESSION
      Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
   EXPORTING
     CLIENT                    = SY-MANDT
     GROUP                     = LV_SESNAM
     HOLDDATE                  = '20040805'
     KEEP                      = 'X'
     USER                      = SY-UNAME
     PROG                      = SY-CPROG
IMPORTING
   QID                       =
   EXCEPTIONS
     CLIENT_INVALID            = 1
     DESTINATION_INVALID       = 2
     GROUP_INVALID             = 3
     GROUP_IS_LOCKED           = 4
     HOLDDATE_INVALID          = 5
     INTERNAL_ERROR            = 6
     QUEUE_ERROR               = 7
     RUNNING                   = 8
     SYSTEM_LOCK_ERROR         = 9
     USER_INVALID              = 10
     OTHERS                    = 11
IF SY-SUBRC <> 0.
    WRITE :/ 'Session not open'.
ENDIF.
ENDFORM.                    " FORM_OPENSESSION
*&      Form FORM_INSERT
      fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE                  = 'FD01'
    POST_LOCAL             = NOVBLOCAL
    PRINTING               = NOPRINT
    SIMUBATCH              = ' '
    CTUPARAMS              = ' '
    TABLES
      DYNPROTAB              = IT_CUSTBDC
    EXCEPTIONS
      INTERNAL_ERROR         = 1
      NOT_OPEN               = 2
      QUEUE_ERROR            = 3
      TCODE_INVALID          = 4
      PRINTING_INVALID       = 5
      POSTING_INVALID        = 6
      OTHERS                 = 7
IF SY-SUBRC <> 0.
    WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM.                    " FORM_INSERT
*&      Form FORM_CLOSESESS
      Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM.                    " FORM_CLOSESESS
*&      Form FORM_FORMATMSG
      Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
      ID        = SY-MSGID
      LANG      = SY-LANGU
      NO        = SY-MSGNO
      V1        = SY-MSGV1
      V2        = SY-MSGV2
      V3        = SY-MSGV3
      V4        = SY-MSGV4
    IMPORTING
      MSG       = LV_MSG
    EXCEPTIONS
      NOT_FOUND = 1
      OTHERS    = 2.
IF SY-SUBRC = 0.
    WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM.                    " FORM_FORMATMSG
*&      Form form_writeop
      To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
           / 'No of Error Records :',V_ELINES,
           / 'No of Success Records :',V_SLINES,
           / 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM.                    " form_writeop
Hope this resolves your query.
Reward all the helpful answers.
Regards

BDC Call Transaction - Doc.No not getting generated in Message Internal tab

Dear All,
I am using BDC Call Transaction method for uploading data for transaction, Iam able to successfully capture the Error messages, sucess messages and the transaction number is also displayed for the bdc run in Mode A, but in case of scheduling the job in background, the Error messages are displayed but the transaction number is not captured in the message Internal table( BDCMSGCOLL).
Kindly look into the matter and revert back for any further info.
Regards
Naresh

Hi,
Please try using the following kind of code in 'CALL TRANSACTION'
    opt-dismode = 'E'.     " Exclusive mode
    opt-defsize = 'X'.
    opt-updmode = 'S'.
    opt-nobinpt = ' '.
    CALL TRANSACTION transaction_code USING ft OPTIONS FROM opt
                                                                         MESSAGES INTO t_bdcmsgcoll .
Hope this will work.
Thanks,
Leo

Getting Return values from RFC function call with visual basic

Hi,
I am creating a sample app to connect to a SAP system which call its RFC functions created with ABAP. It was known that the function will return more than 1 return values.
   SAP Function name ==> "ZFMTP_RFC_GET_RESULT"
        Export parameters (to SAP):
                - Student Name [char 10]         ==> "STUNAME"
                - Student ID         [char 20]        ==> "STUID"
       Return values (From SAP):
                - Results [char 10]        ==> "RESULT"
                - Remarks [char 200]        ==> "REMARKS"
i have managed to get sample codes for connecting and call a RFC function with vb but they only get a return value. How do i retrieve multiple return values like the above function "RESULT" and "REMARKS"?
Here's my vb code to accessing the function
        Dim R3 As Object
        Dim FBFunc As Object
        Dim returnFunc As Boolean
        Dim connected As Boolean
        R3 = CreateObject("SAP.Functions")
        R3.Connection.Client = "000"
        R3.Connection.User = "BCUSER"
        R3.Connection.Password = "minisap"
        R3.Connection.Language = "DE"
        R3.Connection.System = "dtsystem"
        R3.Connection.Applicationserver = "xxx.xxx.xxx.xxx"
        connected = R3.Connection.Logon(0, True)
        If connected <> True Then
            MsgBox("Unable to connect to SAP")
        End If
        FBFunc = R3.add("ZFMTP_RFC_GET_RESULT")
        FBFunc.exports("STUNAME") = "Jonny"
        FBFunc.exports("STUID") = "12345"
        returnFunc = FBFunc.Call() <<== How do i get the return value? or RESULT and REMARKS of the RFC Function?
thanks alot.
Edited by: Eugene Tan on Mar 4, 2008 7:17 AM

Hi Gregor,
Thanks for the link....i am having some doubts with the codes, hope you can clarify them for me if you know the codes..
Below is the code snippet.
Set impReturn = CHPASS_FN.Imports("RETURN") <<=== is RETURN the standard keyword to get a                                                                                return object?
expPassword.Value = currpass
expNewPass.Value = newpass
expFillRet.Value = "1"
''' Call change password function
If CHPASS_FN.Call = True Then
    outFile.Write (", Called Function")
    Message = impReturn("MESSAGE") <<==== So if i have 3 return values..i just replace with the return                                                               value variable names?
    outFile.WriteLine " : " & Message
Else
    outFile.Write (", Call to function failed")
End If
thanks alot...all your help is very appreciated.

Call script in a workflow and get return value?

hello
I want create a workflow to check some attribute in IDM
like for the home directory, use the workflow call some script to check there is enough space in the server? and the folder is almost there or not?
then get the return value like if no enought space, call some other form let the admin input some new home directory string
So I want to know how a workflow work with scipt file?
I also use some after create action script, but it looks only can get some error message and shows in th IDM.

This should help you:
http://www.devdaily.com/java/edu/pj/pj010016/pj010016.shtml
Note that the command will be executed by the application server user so check if it has sufficient rights.
Ben

Regardding CAll Transaction where i will get return value

Similar Messages

Maybe you are looking for