REgarding ALv filter
hi
Experts
i devloped a report in alv, it is sucess fully gives output..
while i selected one column field ( material)
and set filter .
when iam selecting one material to display .
length of the selected field is so small.
example
iam having material s ( MGHJ----1234UR, HFGR-2366, HFRJRHDL-533 ) IN OUTPUT FIELD CATELOG ..
i am selecting mateial colum and set the filter
i want display only mghj----123 material
while i am giving material in filter , it length will be like mghj--
i am unable to see the 123 by drag the legnth ..
if i executed i did n't get anything..
please give the filter field r field catelog field to display correct length
Regards
Spandna
Moderator message - Moved to the correct forum
Edited by: Rob Burbank on May 21, 2009 9:09 AM
Hi,
Itu2019s Very simple there are many ways to solve this problem.
1) if you are using OOPS ALV then use GET_FILTERED_ENTRIES method and read data accorind to
that index
CALL METHOD G_GRID_REFERENCE->GET_FILTERED_ENTRIES
2) simple way - just set the fieldcatlog outputlen same as Material characteristics
Ex: - wa_fieldcat-outputlen = 15.
Salil...
Similar Messages
-
ALV Filter : Not working for a text field - Strange problem
Dear All,
I have a Z-program where the ALV filter is not working on a particular text field.
The output on that text field is as below :
ABCD
JKLM
YYZZ
ABCD
JKLM
ABCD
JKLM
YYZZ
YYZZ
When we try to filter on YYZZ, it gives blank list. But for other options given abobe it works fine.
I know it is because of the negative sign , but how can we over come this problem ?
Thanks in advance,
Sandip.Hi Sandip,
Use 'LOWERCASE' in the fieldcatalog.
For the particular text field when you are appending the Fieldcatalog structure to the Fieldcatalog Table
( Suppose LS_FIELDCAT)
Then check the LOWERCASE field.
(LS_FIELDCAT-LOWERCASE = 'X' )
This will serve the purpose.
Regards,
Sourav -
LED in field of ALV(OOPs oriented)- Traffic lights in ALV filter popup
Hi experts,
Am showing LED in field of ALV(OOPs oriented)and when i click on ALV filter for led field..it shows me Traffic lights in poup for filter.Please help me to get LED in filter popup also.
Thanks,
Sajay.Hi,
Use the fuction module 'ICON_CREATE' as follows.
CALL FUNCTION 'ICON_CREATE'
"To create Red/Yellow/Green traffic icons
EXPORTING
name = wrk_light
IMPORTING
RESULT = ip_status.
wrk_light can be;
'ICON_RED_LIGHT'
'ICON_YELLOW_LIGHT'
or 'ICON_GREEN_LIGHT' according to your scenario, that you can use the logic for your scondition.
Use it in PBO.
Regards,
Renjith Michael. -
ALV filter- In activate case Sensitive nature
Dear experts,
I have z report with standard ALV filter and when I try to filter text column and itu2019s did not work. I know this happens because of case sensitive nature of filter. Could u pls help me how to inactivate case sensitive nature of the ALV filter
Thank you & Best Regards
SameeraSameera,
You can use lowercase flag on fieldcat:
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
FORM monta_layout_alv.
DATA: la_fieldcat LIKE LINE OF it_fieldcat.
CLEAR: la_fieldcat.
la_fieldcat-fieldname = 'DESC_MOD'.
la_fieldcat-tabname = 'IT_SAIDA'.
la_fieldcat-seltext_m = 'Modalidade'(804).
la_fieldcat-lowercase = 'X'.
APPEND la_fieldcat TO it_fieldcat. -
Web Dynpro ABAP ALV Filter Dropdown
Hi,
I have a question regarding the filter in the ALV.
I would like to implement a filter with a dropdown box showing all possible values of a DDIC domain. The results should look like on the following screenshot (Taken from a POWL list)
[Screenshot|http://dl.dropbox.com/u/958234/ALV_Filter_Dropdown.png]
How is this possible with a normal SAP List Viewer?
Thanks a lot
Kind regards,
SwenYes,
You can do it.
lr_filter_element = i_filter_node->create_element( ).
lr_filter_element->set_attribute(
name = 'FIELDNAME'
value = <lfs_field>-fieldname
lr_filter_element->set_attribute(
name = 'T_DROPDOWN_VALUES'
value = lt_key_values
i_filter_node->bind_element(
new_item = lr_filter_element
set_initial_elements = abap_false
Best regards,
Rohit -
ABAP WebDynpro ALV Filter Dropdown
Hi guys,
Is it possbile to do the dropdown list of alv filter?
If so , how to do that?
Thanks in advance.
Best regards,
VincentHello Lakshmi,
I did as follows.
1. Go to WDComponent.
2. Add SALV_WD_TABLE as Component use at Used Components tab.
3. Go to ViewController.
4. Add SALV_WD_TABLE as used Component and used Interface at Properties tab.
5. Map FILTER_VALUES node from used Component of ALV to Context of ViewController at Context tab.
6. Code as follows.
DATA lo_nd_filter_values TYPE REF TO if_wd_context_node.
DATA ls_filter_values TYPE REF TO if_wd_context_element.
DATA l_wdy_key_value_table TYPE TABLE OF wdy_key_value.
DATA l_wdy_key_value TYPE wdy_key_value.
lo_nd_filter_values = wd_context->get_child_node( name = wd_this->wdctx_filter_values ).
ls_filter_values = lo_nd_filter_values->create_element( ).
ls_filter_values->set_attribute(
name = `FIELDNAME`
value = `ATTR1` "Attribute name that you want to set filter.
*Followings are filter values.
l_wdy_key_value-key = `0`.
l_wdy_key_value-value = ``.
APPEND l_wdy_key_value TO l_wdy_key_value_table.
l_wdy_key_value-key = `1`.
l_wdy_key_value-value = `AAAA`.
APPEND l_wdy_key_value TO l_wdy_key_value_table.
l_wdy_key_value-key = `2`.
l_wdy_key_value-value = `BBBB`.
APPEND l_wdy_key_value TO l_wdy_key_value_table.
l_wdy_key_value-key = `3`.
l_wdy_key_value-value = `CCCC`.
APPEND l_wdy_key_value TO l_wdy_key_value_table.
ls_filter_values->set_attribute(
name = `T_DROPDOWN_VALUES`
value = l_wdy_key_value_table
lo_nd_filter_values->bind_element( new_item = ls_filter_values set_initial_elements = abap_false ).
Regards,
Masaaki YANOKUCHI
Edited by: Masaaki Yanokuchi on Jan 26, 2010 10:35 AM -
Hello colleagues out there,
I have a request from my users concerning ALV filtering. They want to have filters of the kind :
- A = 5 or B = 6
- A + B > C
(A, B, C Columns of the table)
Surely I can implement such rules "hard" coded in the ABAP. But my question is: Is there are more generic way, that allows the users to define their filter rules themselves without having to modify my programs ?
Many thanky for your help
Rabanus DiehlHi rabanus,
1. A = 5 can be done
B = 6 can be done
but OR conditions, between two fields cannot be done,
in standard alv filter functionality.
2. A + B > C
cannot be done,
bcos it allows filter only one one field, by one field,
not
using some expressions/equations.
regards,
amit m. -
Help needed regarding ALV report
Hi,
I have a query regarding ALV report.
The requirement is as follows:-
When the user executes the ALV report and if he sums one numeric field column values and filters out some of the field columns ( for example there r 5 columns in the report and the user has filtered out 2 of them and viewing only 3 columns)
and now the requirements is that when the user runs the report later he should see the modified report ( i mean only 3 cloumns and the total value of the column which he has made) but not the original output which was there when the report was developed.
First of all i wanna know is it possible to do r not. If yes then how
Hope u have got what i want.
eagerly waiting for ur reply.
regards,
maqsoodHi
Yes you can! You have to manage the layout variant.
So when you call your ALV you have to set the parameter I_SAVE = 'A'.
In this way you'll allow the user to save the variants for layout.
After you has to have a chance to choose the variant in selection-screen.
See the demo program BCALV_GRID_11 to manage the variant in selection-screen.
Max -
LED in field and traffic lights in ALV filter
Hi experts,
Am showing LED in field of ALV(OOPs oriented)and when i click on ALV filter for led field..it shows me Traffic lights in poup for filter.Please help me to get LED in filter popup also.
Thanks,
Sajay.Solved
-
Problem with ALV filter functionality when filtered for multiple values
Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
FerozHi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz -
Hi all,
i am having one issue regarding ALV GRID.
my issue is after executin report O/P in grid format is ok,
but the same format i want to display when u click print preview or when u execute it in back ground,
it is displaying as same as ALV LIST,hi use the coding like this,
here i am calling hirarchial from list check this....
*& Report ZZZ00
REPORT ZPR_02.
TYPE-POOLS: SLIS.
TABLES:pa0002,pa0008.
data:begin of it_pa0002 occurs 0,
checkbox,
pernr like pa0002-pernr,
begda like pa0002-begda,
endda like pa0002-endda,
vorna like pa0002-vorna,
nachn like pa0002-nachn,
end of it_pa0002.
data:begin of it_pa00021 occurs 0,
pernr like pa0002-pernr,
begda like pa0002-begda,
endda like pa0002-endda,
vorna like pa0002-vorna,
nachn like pa0002-nachn,
expand TYPE xfeld value 'X',
end of it_pa00021.
data:begin of it_pa0008 occurs 0,
pernr like pa0008-pernr,
begda like pa0008-begda,
endda like pa0008-endda,
ANSAL like pa0008-ANSAL,
LGA01 like pa0008-LGA01,
BET01 LIKE PA0008-BET01,
end of it_pa0008.
DATA: IT_FIELD_CAT TYPE SLIS_T_FIELDCAT_ALV,
IT_FIELD_CAT1 TYPE SLIS_T_FIELDCAT_ALV,
IT_LAYOUT1 TYPE SLIS_LAYOUT_ALV,
WA_FIELD_CAT TYPE SLIS_FIELDCAT_ALV,
WA_FIELD_CAT1 TYPE SLIS_FIELDCAT_ALV,
IT_LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_EVENTS TYPE SLIS_T_EVENT,
WA_EVENTS TYPE SLIS_ALV_EVENT,
IT_HEADER TYPE SLIS_T_LISTHEADER,
WA_HEADER TYPE SLIS_LISTHEADER,
wa_keyinfo TYPE slis_keyinfo_alv.
CONSTANTS:c VALUE 'X'.
SELECT-OPTIONS: S_pernr FOR pa0002-pernr.
START-OF-SELECTION.
SET PF-STATUS 'DATA' .
PERFORM GET_DATA.
PERFORM BUILD_FIELD_CAT.
PERFORM GET_EVENTS.
PERFORM DISPLAY_DATA.
*& Form get_data
text
FORM GET_DATA .
SELECT pernr
begda
endda
vorna
nachn
FROM pa0002
INTO CORRESPONDING FIELDS OF TABLE IT_pa0002
WHERE pernr IN S_pernr.
ENDFORM. " get_data
*& Form build_field_cat
text
FORM BUILD_FIELD_CAT .
wa_field_cat-tabname = 'PA0002'.
WA_FIELD_CAT-FIELDNAME = 'CHECKBOX'.
wa_field_cat-ref_tabname = 'IT_PA0002'.
WA_FIELD_CAT-REPTEXT_DDIC = 'Check Box'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
CLEAR WA_FIELD_CAT.
wa_field_cat-tabname = 'PA0002'.
WA_FIELD_CAT-FIELDNAME = 'PERNR'.
wa_field_cat-ref_tabname = 'IT_PA0002'.
WA_FIELD_CAT-REPTEXT_DDIC = 'Personnel no'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
CLEAR WA_FIELD_CAT.
wa_field_cat-tabname = 'PA0002'.
WA_FIELD_CAT-FIELDNAME = 'BEGDA'.
wa_field_cat-ref_tabname = 'IT_PA0002'.
WA_FIELD_CAT-REPTEXT_DDIC = 'Start date'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
CLEAR WA_FIELD_CAT.
wa_field_cat-tabname = 'PA0002'.
WA_FIELD_CAT-FIELDNAME = 'ENDDA'.
wa_field_cat-ref_tabname = 'IT_PA0002'.
WA_FIELD_CAT-REPTEXT_DDIC = 'End date'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
CLEAR WA_FIELD_CAT.
wa_field_cat-tabname = 'PA0002'.
WA_FIELD_CAT-FIELDNAME = 'VORNA'.
wa_field_cat-ref_tabname = 'IT_PA0002'.
WA_FIELD_CAT-REPTEXT_DDIC = 'First name'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
CLEAR WA_FIELD_CAT.
wa_field_cat-tabname = 'PA0002'.
WA_FIELD_CAT-FIELDNAME = 'NACHN'.
wa_field_cat-ref_tabname = 'IT_PA0002'.
WA_FIELD_CAT-REPTEXT_DDIC = 'Last name'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
CLEAR WA_FIELD_CAT.
wa_field_cat1-tabname = 'PA0002'.
WA_FIELD_CAT1-FIELDNAME = 'PERNR'.
wa_field_cat1-ref_tabname = 'IT_PA00021'.
WA_FIELD_CAT1-REPTEXT_DDIC = 'Personnel no'.
APPEND WA_FIELD_CAT1 TO IT_FIELD_CAT1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0002'.
WA_FIELD_CAT1-FIELDNAME = 'BEGDA'.
wa_field_cat1-ref_tabname = 'IT_PA00021'.
WA_FIELD_CAT1-REPTEXT_DDIC = 'Start date'.
APPEND WA_FIELD_CAT1 TO IT_FIELD_CAT1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0002'.
WA_FIELD_CAT1-FIELDNAME = 'ENDDA'.
wa_field_cat1-ref_tabname = 'IT_PA00021'.
WA_FIELD_CAT1-REPTEXT_DDIC = 'End date'.
APPEND WA_FIELD_CAT1 TO IT_FIELD_CAT1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0002'.
WA_FIELD_CAT1-FIELDNAME = 'VORNA'.
wa_field_cat1-ref_tabname = 'IT_PA00021'.
WA_FIELD_CAT1-REPTEXT_DDIC = 'First name'.
APPEND WA_FIELD_CAT1 TO IT_FIELD_CAT1.
CLEAR WA_FIELD_CAT.
wa_field_cat1-tabname = 'PA0002'.
WA_FIELD_CAT1-FIELDNAME = 'NACHN'.
wa_field_cat1-ref_tabname = 'IT_PA00021'.
WA_FIELD_CAT1-REPTEXT_DDIC = 'Last name'.
APPEND WA_FIELD_CAT1 TO IT_FIELD_CAT1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0008'.
wa_field_cat1-fieldname = 'PERNR'.
wa_field_cat-ref_tabname = 'IT_PA0008'.
wa_field_cat1-REPTEXT_DDIC = 'personnelno'.
APPEND wa_field_cat1 TO it_field_cat1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0008'.
wa_field_cat1-fieldname = 'BEGDA'.
wa_field_cat-ref_tabname = 'IT_PA0008'.
wa_field_cat1-REPTEXT_DDIC = 'begindate'.
APPEND wa_field_cat1 TO it_field_cat1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0008'.
wa_field_cat1-fieldname = 'ENDDA'.
wa_field_cat-ref_tabname = 'IT_PA0008'.
wa_field_cat1-REPTEXT_DDIC = 'enddate'.
APPEND wa_field_cat1 TO it_field_cat1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0008'.
wa_field_cat1-fieldname = 'ANSAL'.
wa_field_cat-ref_tabname = 'IT_PA0008'.
wa_field_cat1-REPTEXT_DDIC = 'annualsalary'.
APPEND wa_field_cat1 TO it_field_cat1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0008'.
wa_field_cat1-fieldname = 'LGA01'.
wa_field_cat-ref_tabname = 'IT_PA0008'.
wa_field_cat1-REPTEXT_DDIC = 'wagetype'.
APPEND wa_field_cat1 TO it_field_cat1.
CLEAR WA_FIELD_CAT1.
wa_field_cat1-tabname = 'PA0008'.
wa_field_cat1-fieldname = 'BET01'.
wa_field_cat-ref_tabname = 'IT_PA0008'.
wa_field_cat1-REPTEXT_DDIC = 'Amount'.
APPEND wa_field_cat1 TO it_field_cat1.
CLEAR WA_FIELD_CAT1.
ENDFORM. " build_field_cat
*& Form display_data
text
FORM DISPLAY_DATA .
it_layout-box_fieldname = 'CHECKBOX'.
it_layout-EDIT = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_FIELDCAT = IT_FIELD_CAT
IS_LAYOUT = IT_LAYOUT
IT_EVENTS = IT_EVENTS
TABLES
T_OUTTAB = IT_pa0002.
ENDFORM. " display_data
*& Form get_events
text
FORM GET_EVENTS .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
IMPORTING
ET_EVENTS = IT_EVENTS .
READ TABLE IT_EVENTS INTO WA_EVENTS
WITH KEY NAME = SLIS_EV_TOP_OF_PAGE.
IF SY-SUBRC = 0.
WA_EVENTS-FORM = 'TOP_OF_PAGE'.
MODIFY IT_EVENTS FROM WA_EVENTS INDEX SY-TABIX.
ENDIF.
ENDFORM. " get_events
*& Form top_of_page
text
FORM TOP_OF_PAGE.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = 'EMPLOYEE DATA'.
APPEND WA_HEADER TO IT_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_HEADER
ENDFORM. "top_of_page
*& Form GUI_SET
FORM GUI_SET USING RT_EXTAB TYPE SLIS_T_EXTAB .
SET PF-STATUS 'DATA' .
ENDFORM. "GUI_SET
*& Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
R_SELFIELD TYPE SLIS_SELFIELD.
DATA:V_PERNR LIKE PA0002-PERNR.
CASE R_UCOMM.
WHEN 'DET'.
DATA: V_FLAG.
clear : v_flag.
LOOP AT IT_PA0002.
if it_PA0002-checkbox = 'X'.
v_flag = 'X'.
v_pernr = IT_PA0002-PERNR.
SELECT PERNR
BEGDA
ENDDA
VORNA
NACHN
FROM PA0002
INTO CORRESPONDING FIELDS OF TABLE IT_PA00021
WHERE PERNR = V_PERNR.
SORT IT_PA00021 BY PERNR.
DELETE ADJACENT DUPLICATES FROM IT_PA00021 COMPARING PERNR.
READ TABLE IT_PA00021 INDEX 1.
SELECT PERNR
BEGDA
ENDDA
ANSAL
LGA01
BET01
FROM PA0008
INTO TABLE IT_PA0008
FOR ALL ENTRIES IN IT_PA00021
WHERE PERNR = IT_PA00021-PERNR.
if not it_PA0008[] Is initial.
SORT IT_PA0008 BY PERNR.
delete adjacent duplicates from it_PA0008 comparing pernr.
READ TABLE IT_PA0008 INDEX 1.
endif.
endif.
enddo.
it_layout1-group_change_edit = c.
it_layout1-colwidth_optimize = c.
it_layout1-zebra = c.
it_layout1-detail_popup = c.
it_layout1-get_selinfos = c.
it_layout-expand_fieldname = 'EXPAND'.
wa_keyinfo-header01 = 'PERNR'.
wa_keyinfo-item01 = 'PERNR'.
IF NOT V_FLAG IS INITIAL.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = IT_LAYOUT1
IT_FIELDCAT = IT_FIELD_CAT1
I_TABNAME_HEADER = 'PA0002'
I_TABNAME_ITEM = 'PA0008'
IS_KEYINFO = wa_keyinfo
TABLES
T_OUTTAB_HEADER = IT_PA00021
T_OUTTAB_ITEM = IT_PA0008.
ENDIF.
CLEAR: IT_PA00021,IT_PA0002,IT_PA0008.
ENDLOOP.
WHEN 'BACK'.
EXIT.
ENDCASE.
ENDFORM. "USER_COMMAND
reward points if useful,
venkat. -
Hi Abapers,
I am having one Problem regarding ALV Header on the report. Requirement is to get the data it into this order on ALV Header using Simple ABAP.
Summary
"Building No Room No Comments
111 AA Over Allocated.
545 XX Space Free
787 YY No Space
I have Tried to enter it into the header table but the data is not coming correctly.
Problem is It is coming in this way which is wrong..
Summary
"Building No Room No Comments
111 AA Over Allocated.
545 XX Space Free
787 YY No Space
Can Any body solve my Problem to get the header information it into the below .
Summary
"Building No Room No Comments
111 AA Over Allocated.
545 XX Space Free
787 YY No SpaceHi ,
I have tried but couldn't succeded. Can you Please provide me the solution. -
Hi All,
In web dynpro ALV we have one column called Article . I am trying to find the article 661-2689 by using Standard SAP filter option but the Article is getting converted to 000000000000000661-000000000000002689 . This zero appending happens when I choose the Filter/ Press enter key . It does not find the article by using Filter option .
Our system version is SAP_BASIS 700 . Please let me know if there is any solution to this ALV Filter issue .
Thanks in advance,
Kiran.Hi Kiran,
It depends on the attribute's data element. If it's NUMC this property is automatically displayed in the context in the bottom panel labeled "Formatting".
But if you are trying to do it whit Article i think the data element is MATNR of type CHAR, so this property will not be displayed.
May be, you need to convert the value assigned to your filter field before to trigger the filter. I think you have created an action for the event "onFilter" in your table, so in this action before to do "wd_this->table_filter->apply_filter( )" maybe you need to use the FM CONVERSION_EXIT_ALPHA_OUTPUT in order to quit the leading zeros. -
Hi,
I am facing a problem with the ALV grid. Recently our system got upgraded to ECC 5.0
There is a column in the grid for displaying message texts.If i try to set a filter for the message text column,a popup comes as usual to select the values in the message column. In that popup, suppose a F4 help is taken, texts are getting truncated.
Could you please suggest any OSS notes need to be added for this?
Regards,
RajuHi,
try to use EDIT_MASK for that field and see.
you try this way..
<b>
Fieldcat-edit_mask = '==ALPHA'.</b>
for the text field.
Regards
vijay -
Regarding ALV outputs ( with layout variants)
Hi,
I have a problem where in an ALV report when it is executed with a variant (there is one layout parameter in the screen which is also filled. This layout is set with a filter),
displays the output. But the displayed output doesn't filter the output as per the required criteria set in the layout filter.
When I execute the report with the same variant but now if I select the layout by pressing F4 on the layout field and select the same layout as earlier (which is having the filter criteria), now it displays the output as per the required criteria set in the filter.
I don't understand why if I execute the report with a variant with the layout value also filled, it is not able to give the required output as per the filter criteria set for the layout.
When the report is executed with the same variant but the layout value selected from F4, it dispalys the correct output with the filter criteria set for the layout.
In general, I mean why the program is not able to load the layout with filter when it is called from a variant?
Regards,
RajeshIt depends on your Layout, How you saved it .
And one more question are you passing the layout parameter and Filter parameter to the Function module
Maybe you are looking for
-
How to get Application name of a current running process in LiveCycle??
Hi, I want to get the Application name of current running process in LiveCycle as a output value. I have 3 applictions, the 3 applications are calling same SubProcess, so I want get the name of the application from which the sub process has been call
-
Adobe Acrobat Distiller not correctly installed
Adobe Acrobat 9.0.0, OS 01.5.4 When I try to print from "Tex-Edit Plus.app 4.9.8" using the Adobe PDF 9.0 printer I get a request to find "Adobe Acrobat Distiller". I'm then given a window to select from but "Acrobat Distiller.app" is grayed out, NOT
-
Hi, I bought the Production Suite last year or something, and now I would like to upgrade to Final Cut Studio for $199. Does anyone now, if apple ships the whole Studio box, or simply the install discs? Just curious. Patrick
-
FI-SL Currency Translation issue , Tcode - GWUL
HI When I use the T-Code GWUL to run the currency translation something is happening in November with some of the equity accounts. I will use our Japan company code as an example. In period 1 through 5 of FY14 when I run the translation the Commo
-
Hi, We have a situation with one of the Purchase order confirmation in the classic scenario. The confirmation has generated a number in SRM but the same shows status 'Error in Process'. On checking the transaction RZ20, I found that there were errors