Regarding BDC and Call transaction Method

hi gurus,
can anyone tell the difference how many records Call transaction and Session
Method can upload in case of single transaction and what is the time taken by each.its urgent pls.
thanks and regards.

Rajesh,
u can do as many as ,
coming to speed means it depends on server,
if ur using session then u can calculate time ,
with in one time h many records system will upload the records by seeing in sm35
(first see h many records systems uploads, see the number and put the time , after one min again see the records h many it is ,) u can calculate by this.
remember this speed will changes depends on server,
so if u have n number of records better to do upload in weekends.
2) if u r using call transaction method means , normally we use error file where ever record occurs that record is in error file, i think we cant analyze h many records it will be with in a time r .
we can also check by going respective tables , just put the time and do refreshing the table after one minute , n this way u can analyze .
Thanks

Similar Messages

Mappimg and updation in bdc 'session ' and 'call transaction' methods

What will happen if error record comes while updating in session method and call transaction method.

Hi,
If any error comes in Session method U can find that error in SM35->Log
and updste again database for those enteries
In cll transaction Method U have to handel error manually . for this u have to use structure BDCMSGCOL and Table T100.
Regards
Gaurav

Difference between Session method and Call transaction method

Hi,
Difference between Session method and Call transaction method in BDC

Hi,
SESSION method:
Is a standard procedure for transferring large amount of data into the R/3 system.
Data consistency is ensured because batch input uses all thje checks conducted on the normal screen.
It is a two step procedure:
1. Progarm: creates batch input session. This session is the data file that includes everything to begin the transaction.
2. Process session: Which then actually transfers the data to database table.
In this method an ABAP/4 program reads the external data that is to be entered in the SAP system and stores the data in a session.
A session stores the actions that are required to enter your data using normal SAP transactions i.e. data is transferred to session which inturn transfers data to database table. Session is an intermediate step between internal table and database table.
Data along with it's actions are stored in session. i.e. data for screen fields, to which screen it is passed, the program name behind it and how next screen is processed.
When the program has finished generating the session, u can run the session to execute the SAP transactions in it.
BDC_OPEN_GROUP
          You create the session through program by BDC_OPEN_GROUP function.
1) User Name: User Name.
2) Group       : Name of the session
3) Lock Date : The date when you want to process the session.
4) Keep        : This parameter is passed as 'X' when you want to retain session even       after processing it.
BDC_INSERT
     Data is transferred to session by BDC_INSERT.
BDC_CLOSE_GROUP.
     With this function the session will be closed.
CALL TRANSACTION method.
Syntax: call transaction <tr code> using <bdctab>
                             mode <A/N/E>
                             update <S/A>
                             messages into <internal table>.
<tr code>   : transaction code
<bdctab>   : Name of the BDC table
mode: mode in which you execute the transaction.
A   : all screen mode ( all the screens of the transaction are displayed )
N   : no screen mode ( no screen will be displayed when you execute the transaction )
E   : error screen ( only those screens are displayed where in you have error record )
Update type:
S: synchronous update in which if you change data of one table then all the related tables gets updated and SY_SUBRC is returned for once and all.
A: asynchronous update in which if you change data of one table, the sy-subrc is returned and then updation of other affected tables takes place. So if system fails to update other tables still sy-subrc returned is zero.(that is when first table gets updated ).
messages: if you update database table, operation is either successful or unsuccessful. These messages are stored in internal table. This internal table structure is like BDCMSGCOLL.
       TCODE: transaction code.
       DYNAME: batch input module name.
       DYNNUMB: batch input dyn no.
       MSGTYP: batch input message type.
       MSGSPRA: batch input language id of message.
       MSGID:    message id.
       MSGV1.MSGV5: message variables
For each entry which is updated in the database table message is available in BDCMSGCOLL.
Reward if useful
Regards
Srinu

Error while updating data using session and call transaction method

Hi all,
    i have to update data using MM01 transaction from flat file to database.i have used both session method and call transaction method to do that.in both the methods data has been transferred from internal tables to screens but while updating the data that is by clicking the ok-code at the end of the transaction iam getting a dialogue box stating
   SAP EXPRESS DOCUMENT "UPDATE WAS TERMINATED" RECEIVED FROM AUTHOR "SAP".
please tell whether the problem lies and solution for that.
                                   thanks and regards.

hi,
check your recording.check whether u saved your material no in recording or not.
once again record the transacton mm01.
       MATNR LIKE RMMG1-MATNR,
       MBRSH LIKE RMMG1-MBRSH,
       MTART LIKE RMMG1-MTART,
       MAKTX LIKE MAKT-MAKTX,
       MEINS LIKE MARA-MEINS,
       MATKL LIKE MARA-MATKL,
       BISMT LIKE MARA-BISMT,
       EXTWG LIKE MARA-EXTWG,
these are the fields which u have to take in internal table.
this is the record which i took in my flatfile.use filetype as asc and hasfieldseperator as 'X'.
SUDHU-6     R     ROH     MATSUDHU     "     001     7890     AA
i did the same.but i didn't get any error.

Where can i find the theory for session and call transaction method

hi
where can i find the theory for session and call transaction method
bye

check this link
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.planetsap.com/bdc_main_page.htm
lsmw, bapi, bdc- session, bdc-calltransaction
u can get it in help.sap.com also

Log file in session and call transaction methods

Hi Experts,
How to see log file in session and call transaction methods?

hi
If its a session then goto SM35, select ur session and then u can see log button over there at the top... that will give the log
If its a call transaction then in ur program u need to declare internal table IT_MSGS like this
DATA: IT_MSGS LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
LOOP AT IT_SALES.
    PERFORM POPULATE_BDC.
    CALL TRANSACTION 'VA01' USING IT_BDCDATA
                                  MODE MODE
                                  UPDATE UPDATE
                                  MESSAGES INTO IT_MSGS.
    IF NOT IT_MSGS[] IS INITIAL.
      LOOP AT IT_MSGS.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            ID        = IT_MSGS-MSGID
            LANG      = 'EN'
            NO        = IT_MSGS-MSGNR
            V1        = IT_MSGS-MSGV1
            V2        = IT_MSGS-MSGV2
            V3        = IT_MSGS-MSGV3
            V4        = IT_MSGS-MSGV4
          IMPORTING
            MSG       = V_MSG
          EXCEPTIONS
            NOT_FOUND = 1
            OTHERS    = 2.
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        WRITE:/ V_MSG.
      ENDLOOP.
    ENDIF.
ENDLOOP.
This will create a log for you, dont forget to award points if found helpful

Clarification on session and call transaction method.

in session method updation is synchronous and processing is asynchrounous. Session Method can handle Multiple Applications at a time. Where as Call Transaction Method can handle only one Application.
can anyone explain the above lines with a simple example.what is updation and what is meant by processing.how a session handles multiple transactions as we know that sessions cannot be run in parallel?At a time multiple screens are updated in session?how?
in the below thread it has been mentioned "2. If u want to execute the program in future u can create a session and keep it ready so that u can execute it at any point of time. That is not possible in call transaction method."
Session Method & Call Transaction
if we write the bdc program with call transaction , then it can also be used in future ,then what makes the difference.
what is meant by local update?when we need to use local update in call transaction?.

We're not your free code factory. Try yourself, search for existing solutions, and come back here with specific problems.

BDC via call transaction method

I have a requirement wherin I am supposed to execute transaction FI01 in background.
While I do this, there is a pop-up window displayed for selection of jurisdiction code.I am unable to capture this in background.
Can we capture pop-up window values ?
In foreground, the scenario works fine,since there will be user intervention in this case.
Thanks in advance,

The answer has already been given by Frederic. You have to find out the BDC field names via F1 and technichal help. There you also can find the dynpro numbers and report names. With these parameters you have to fill the bdcdata table in the call transaction command. See
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/de/fa/09714d543b11d1898e0000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/de/fa/09714d543b11d1898e0000e8322d00/frameset.htm</a>
Regards,
Thomas

Session method and call transaction methos which one is the sap recomonded

hi
PLease give me the answer to these questions.
session method and call transaction methos which one is the sap recomonded why .
2) if we want to maintain BDC program in all the systems.wt to d0

Hi Revethi,
Here is the difference between the Session and Call Transaction method.
Session
Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ... bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
Syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E> update <L/A/S>
messages into BDCMSGCOLL.

How to handle the pop-ups in va02 transaction in Call Transaction Method

Hi Experts ,
I am trying to do bdc by call transaction method for va02 transaction but i am getting popups .
How can i handle the popups and for different sales orders i am getting different popups.
is there any way to handle the pop ups dynamically.
Thanks ain advance.

hi,
when you are using BDC then you will have to handle all the popups. this is minus point in using bdc as you need to feed each and every single bit of information so that bdc works fine and if anything misses then your bdc program will get stuck in middle of processing.
best thing is check for function module or BAPIs available for those transactions. For VA02 there is a BAPI available ''BAPI_SALESORDER_CHANGE''. Try using this BAPI and if this BAPI doesnt handle the change you want to make in sales order then only go for BDC.
you can also check BAPIs available in 'BAPI' tcode.
hope this is helpful.
Regards,
Saba

How can we correct and process errorrecords in session and call transaction

hai all
how ca we correct and process error records in session and call transaction method . tell me with coding.
Edited by: swamy katta on May 14, 2008 10:25 AM
Edited by: swamy katta on May 14, 2008 10:26 AM
Edited by: swamy katta on May 14, 2008 10:27 AM

hi,
Check out the below sample code ...Here are the records are getting posting with call transaction method and a session is getting created with erroreneous records....
REPORT ztest_report
NO STANDARD PAGE HEADING
                        LINE-SIZE 255
                        MESSAGE-ID ZRASH.
*                 Internal Table Declarations                          *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
         KUNNR(10),
         BUKRS(4),
         KTOKD(4),
         ANRED(15),
         NAME1(35),
         SORTL(10),
         STRAS(35),
         ORT01(35),
         PSTLZ(10),
         LAND1(3),
         SPRAS(2),
         AKONT(10),
       END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
         KUNNR(10),
         EMSG(255),
       END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
         KUNNR(10),
         SMSG(255),
       END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
       V_TLINES LIKE SY-TABIX,
       "For storing total records processed.
       V_ELINES LIKE SY-TABIX,
       "For storing the no of error records.
       V_SLINES LIKE SY-TABIX.
       "For storing the no of success records.
*          Selection screen                                            *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
             V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
*          Start-of-selection                                          *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
*        TOP-OF-PAGE                                                   *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
*          End of Selection                                            *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*&      Form form_uploadff
*     Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = LV_FILE
*     FILETYPE                      = 'ASC'
      HAS_FIELD_SEPARATOR           = 'X'
*     HEADER_LENGTH                 = 0
*     READ_BY_LINE                  = 'X'
*     DAT_MODE                      = ' '
*   IMPORTING
*     FILELENGTH                    =
*     HEADER                        =
    TABLES
      DATA_TAB                      = IT_FFCUST
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
    DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
    DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM.                    " form_uploadff
*&      Form Form_bdcgenerate
*     Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
    PERFORM POPULATEBDC USING :
                                'X' 'SAPMF02D' '0105',
                                ' ' 'BDC_OKCODE' '/00' ,
                                ' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
                                ' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
                                ' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
                                'X' 'SAPMF02D' '0110' ,
                                ' ' 'BDC_OKCODE' '/00',
                                ' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
                                ' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
                                ' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
                                ' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
                                ' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
                                ' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
                                ' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
                                ' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
                                'X' 'SAPMFO2D' '0120',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0125',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0130',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0340',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0360',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0210',
                                ' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0215',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0220',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0230',
                                ' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
    CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
    MESSAGES INTO IT_CUSTMSG.
    IF SY-SUBRC <> 0.
*--Populating the error records internal table.
      IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_ERRCUST.
      CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
      IF V_FLAG1 = ' '.
        PERFORM FORM_OPENSESSION.
        V_FLAG1 = 'X'.
      ENDIF.
*--Inserting the error records into already open session.
      IF V_FLAG1 = 'X'.
        PERFORM FORM_INSERT.
      ENDIF.
*--Populating the Success records internal table.
    ELSE.
      IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_SUCCUST.
      CLEAR IT_SUCCUST.
    ENDIF.
*--Displaying the messages.
    IF NOT IT_CUSTMSG[] IS INITIAL.
      PERFORM FORM_FORMATMSG.
    ENDIF.
*--Clearing the message and bdc tables.
    CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
    PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM.                    " Form_bdcgenerate
*&      Form populatebdc
*       FOrm to Populate the BDC table.
FORM POPULATEBDC USING    VALUE(P_0178)
                           VALUE(P_0179)
                           VALUE(P_0180).
IF P_0178 = 'X'.
    IT_CUSTBDC-PROGRAM = P_0179.
    IT_CUSTBDC-DYNPRO = P_0180.
    IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
    IT_CUSTBDC-FNAM = P_0179.
    IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM.                    " populatebdc
*&      Form FORM_OPENSESSION
*       Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
   EXPORTING
     CLIENT                    = SY-MANDT
     GROUP                     = LV_SESNAM
     HOLDDATE                  = '20040805'
     KEEP                      = 'X'
     USER                      = SY-UNAME
     PROG                      = SY-CPROG
* IMPORTING
*    QID                       =
   EXCEPTIONS
     CLIENT_INVALID            = 1
     DESTINATION_INVALID       = 2
     GROUP_INVALID             = 3
     GROUP_IS_LOCKED           = 4
     HOLDDATE_INVALID          = 5
     INTERNAL_ERROR            = 6
     QUEUE_ERROR               = 7
     RUNNING                   = 8
     SYSTEM_LOCK_ERROR         = 9
     USER_INVALID              = 10
     OTHERS                    = 11
IF SY-SUBRC <> 0.
    WRITE :/ 'Session not open'.
ENDIF.
ENDFORM.                    " FORM_OPENSESSION
*&      Form FORM_INSERT
*       fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE                  = 'FD01'
*     POST_LOCAL             = NOVBLOCAL
*     PRINTING               = NOPRINT
*     SIMUBATCH              = ' '
*     CTUPARAMS              = ' '
    TABLES
      DYNPROTAB              = IT_CUSTBDC
    EXCEPTIONS
      INTERNAL_ERROR         = 1
      NOT_OPEN               = 2
      QUEUE_ERROR            = 3
      TCODE_INVALID          = 4
      PRINTING_INVALID       = 5
      POSTING_INVALID        = 6
      OTHERS                 = 7
IF SY-SUBRC <> 0.
    WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM.                    " FORM_INSERT
*&      Form FORM_CLOSESESS
*       Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM.                    " FORM_CLOSESESS
*&      Form FORM_FORMATMSG
*       Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
      ID        = SY-MSGID
      LANG      = SY-LANGU
      NO        = SY-MSGNO
      V1        = SY-MSGV1
      V2        = SY-MSGV2
      V3        = SY-MSGV3
      V4        = SY-MSGV4
    IMPORTING
      MSG       = LV_MSG
    EXCEPTIONS
      NOT_FOUND = 1
      OTHERS    = 2.
IF SY-SUBRC = 0.
    WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM.                    " FORM_FORMATMSG
*&      Form form_writeop
*       To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
           / 'No of Error Records :',V_ELINES,
           / 'No of Success Records :',V_SLINES,
           / 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM.                    " form_writeop
* if routeindicator is initial.
*   LOOP AT IT_YMMEE00090.
*      LV_LENGTH = STRLEN( IT_YMMEE00090-CHANGETYPE ).
*      IF SY-TABIX = '1'.
*        IF IT_YMMEE00090-CHANGETYPE = 'B' AND LV_LENGTH = 1.
*          ROUTEINDICATOR = 'S'.
*        ELSEIF IT_YMMEE00090-CHANGETYPE = 'R' AND LV_LENGTH = 1.
*          ROUTEINDICATOR = 'S'.
*        ELSEIF IT_YMMEE00090-CHANGETYPE = 'S' AND LV_LENGTH = 1.
*          ROUTEINDICATOR = 'S'.
*        ELSEIF IT_YMMEE00090-CHANGETYPE CA 'BRSCD' AND LV_LENGTH GT 1
*                                          AND LV_LENGTH LE 5.
*          ROUTEINDICATOR = 'S'.
*        ENDIF.
*      ELSE.
*        IF IT_YMMEE00090-CHANGETYPE = 'B' AND LV_LENGTH = 1 AND
*                                         ROUTEINDICATOR = 'S'.
*          ROUTEINDICATOR = 'S'.
*        ELSEIF IT_YMMEE00090-CHANGETYPE = 'R' AND LV_LENGTH = 1 AND
*                                         ROUTEINDICATOR = 'S'.
*          ROUTEINDICATOR = 'S'.
*        ELSEIF IT_YMMEE00090-CHANGETYPE = 'S' AND LV_LENGTH = 1 AND
*                                         ROUTEINDICATOR = 'S'.
*          ROUTEINDICATOR = 'S'.
*        ELSEIF IT_YMMEE00090-CHANGETYPE CA 'BRSCD' AND LV_LENGTH GT 1
*                  AND LV_LENGTH LE 5 AND ROUTEINDICATOR = 'S'.
*          ROUTEINDICATOR = 'S'.
*        ENDIF.
*      ENDIF.
* ENDLOOP.
* endif.

Error in BDC CALL TRANSACTION METHOD..

hai i got an error in doing BDC CALL TRANSACTION METHOD
Error:diffrent number of parameters in FORM and PERFORM(routine :FILL_SCREEN_DETAILS:,number of formal parameters :3,number of actual parameters:1)
PROGRAM
REPORT ZDEMO_UPLOAD_COST_CENTER_DATA.
DATA:BEGIN OF WA_DATA,
KOKRS TYPE KOKRS,"CONTROLLING AREA
KOSTL TYPE KOSTL,"COST CENTER
DATAB TYPE DATAB,"START DATE
DATBI TYPE DATBI,"END DATE
KTEXT TYPE KTEXT,"NAME
LTEXT TYPE LTEXT,"DESCRIPTION
VERAK TYPE VERAK,"PERSON RESPONSIBLE
KOSAR TYPE KOSAR, "COST CENTER CATEGORY
KHINR TYPE KHINR,"HIERARCHY AREA
BUKRS TYPE BUKRS,"COMPANY CODE
GSBER TYPE GSBER,"BUISINESS AREA
END OF WA_DATA.
*TYPES:IT_DATA TYPE STANDARD TABLE OF TY_DATA.
DATA:IT_DATA LIKE TABLE OF WA_DATA,
      IT_BDCDATA LIKE TABLE OF BDCDATA,
      WA_BDCDATA LIKE LINE OF IT_BDCDATA,
      IT_BDCMSGCOLL LIKE TABLE OF BDCMSGCOLL,
      WA_BDCMSGCOLL LIKE LINE OF IT_BDCMSGCOLL.
DATA :V_FILE TYPE STRING.
CONSTANTS :C_KS01(4) TYPE C VALUE 'KS01',
            C_X(1) TYPE C VALUE 'X',
            C_A(1) TYPE C VALUE 'A'.
SELECTION-SCREEN:BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
PARAMETER :PA_FILE LIKE FC03TAB-PL00_FILE OBLIGATORY.
SELECTION-SCREEN:END OF BLOCK B1.
*AT SELECTION SCREEN ON VALUE REQUEST
* EVENT TO BE TRIGGERED WHEN WE PRESS F4.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PA_FILE.
PERFORM GET_F4_FOR_FILE USING PA_FILE.
*         START-OF-SELECTION
START-OF-SELECTION.
*WE NEED TO MOVE THE PA_FILE INTO ANOTHER VARIABLE OF TYPE STRING
*AS WE ARE GOING TO USE THE SAME IN THE FM:GUI_UPLOAD THERE THE FILE TYPE IS STRING
V_FILE = PA_FILE.
PERFORM UPLOAD_FILE_T0_ITAB USING V_FILE CHANGING IT_DATA.
*FILL THE SCREEN AND FIELD DETAILS
LOOP AT IT_DATA INTO WA_DATA.
REFRESH IT_BDCDATA.
*FIRST SCREEN DETAILS
PERFORM FILL_SCREEN_DETAILS USING 'SAPLKMA1''0200''X'.
*CURSOR DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_CURSOR''CSKSZ-KOKRS'.
*OK CODE DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_OKCODE''/00'.
*CONTROLLING AREA
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-KOKRS' WA_DATA-KOKRS.
*COST CENTER DETAILS
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-KOSTL' WA_DATA-KOSTL.
* START DATE
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-DATAB_ANFO' WA_DATA-DATAB.
*END DATE
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-DATBI_ANFO' WA_DATA-DATBI.
*NEXT SCREEN DETAILS
PERFORM FILL_SCREEN_DETAILS USING 'SAPLKMA1''0299''X'.
*OKCODE DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_OKCODE''=BU'.
*SUBSCRN FIELD DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_SUBSCR''BDC-SUBSCR'.
*CURSOR DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_CURSOR''CSKSZ-WAERS'.
*NAME
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-KTEXT' WA_DATA-KTEXT.
*DESCRIPTION
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-LTEXT' WA_DATA-LTEXT.
*PERSON RESPONSIBLE
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-VERAK' WA_DATA-VERAK.
*COST CENTER CATEGORY
PERFORM FILL_FIELD_DETAILS USING'CSKSZ-KOSAR' WA_DATA-KOSAR.
*HIERARCHY AREA
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-KHINR' WA_DATA-KHINR.
*COMPANY CODE
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-BUKRS' WA_DATA-BUKRS.
*BUISINESS AREA
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-GSBER' WA_DATA-GSBER.
*CALL THE TRANSACTION
CALL TRANSACTION C_KS01 USING IT_BDCDATA
                          MODE C_A "ALL SCREENS
                                   "N-NO SCREENS
                                   "E-ERROR SCREENS ONLY
                          UPDATE 'A' "ASYNCHRONOUS
                                      "SYNCHRONOUS
                          MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
* FORM FILL SCREEN_DETAILS
FORM FILL_SCREEN_DETAILS USING PROGRAM LIKE BDCDATA-PROGRAM
                       DYNPRO LIKE BDCDATA-DYNPRO
                       DYNBEGIN LIKE BDCDATA-DYNBEGIN.
CLEAR WA_BDCDATA.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = DYNBEGIN.
APPEND WA_BDCDATA TO IT_BDCDATA.
ENDOFRM.
* FORM FILL_FIELD_DETAILS
FORM FILL_FIELD_DETAILS USING FNAM FVAL.
CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
ENDFORM.
* FORM GETE_F4_FOR_FILE
*DISPLAY ALL THE FILES IN THE SYSTEM FOR SELECTION
*P_PA_FILE NAME OF THE FILE
FORM GET_F4_FOR_FILE USING P_PA_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
* EXPORTING
*    PROGRAM_NAME        = SYST-REPID
*    DYNPRO_NUMBER       = SYST-DYNNR
    FIELD_NAME          = 'PA_FILE'
*    STATIC              = ' '
*    MASK                = ' '
   CHANGING
     FILE_NAME           = PA_FILE.
* EXCEPTIONS
*    MASK_TOO_LONG       = 1
*    OTHERS              = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
* FORM UPLOAD_FILE_TO_ITAB
* FP_V_FILE = FILE NAME
*FP_IT_DATA = INTERNAL TABLE TO STORE THE DATA
FORM UPLOAD_FILE_TO_ITAB USING FP_V_FILE CHANGING FP_IT_DATA LIKE IT_DATA.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = FP_V_FILE
HAS_FIELD_SEPARATOR           = ' X'
TABLES
    DATA_TAB                      =FP_IT_DATA.
ENDFORM.
Edited by: saifudheenc on Aug 7, 2010 5:09 PM

hi
try to add spaces between parameters :
example:
PERFORM FILL_SCREEN_DETAILS USING 'SAPLKMA1' '0200' 'X'.
regards,darek

Call Transaction Method of BDC

Hi All,
How to read screen field values using Call Transaction method of BDC? The BDC recording for the transaction /SAPAPO/TSCOPY has been done and only values from 2 fields have to be read which deals with Keyfigures. GS_KFMAP-KEYF_FR & GS_KFMAP-KEYF_TO are the two screen fields.
Thanks & Regards,
Savitha

Hi Savitha,
Can you please clarify Whether you want read the values or Populate values to screen fileds using call transaction?.
If you want to read the screen filed values.I think we do n't use BDC.Directly we can refer to the screen fields and try to find out what fileds(dictionary) they are reffering.

Handling Warning pop up windows in BDC call transaction method

Hi All,
Iam using a BDC to automate the Costing Process i.e. Transaction CK40N using call transaction method. In a particular Screen after i perform the execute action, a warning pop up window appears. Only if I click on OK, the execution continues or else it will not proceed. How to handle this situation in case a warning pop up window appears based on the input which is given? In other words a Dynamic warning message. Thanks in advance....
Regards,
Nirmal

Hello,
U can either use NO_DIALOG or SUPPRESS DIALOG to avaid this,.
Regards,
Vasanth

Screen no change in BDC call transaction method

Hi experts
Greetings!
I have a BDC created in call transaction method for t-code FB01.
Data passed successfully to the first screen but when it navigates to the second screen I am not able to pass any data.
After debugging I found that the issue was because of the DYNPRO value.
It was 8500 when I created this recording but now the screen number shows 350.
Is is possible that screen nos change because of any support stack or OSS notes implementation.
In run time i tried to change the value to 350 and it works fine..
Thanks
Jay

Hi,
LSMW Direct input method is better for your quiry. Becasuse i wrote BDC for FB01 but not working properly.
So i used LSMW, helped me a lot. Progmra name is RFBIBL00. Or else i will export and send you if you want. It can handle multiple line items upto 950.
Thanks,
Sriram

Regarding BDC and Call transaction Method

Similar Messages

Maybe you are looking for