Regarding the Exception JVM INSTR ret 24

Hai!
I need help from all of u i am a fresher and I am given a project to analyse. In that I found errors at lines containing
[ JVM INSTR ret 24 ]
and another error at the line containing
[ Exception exception;
exception; ]
The data inside the brackets is the code
i am using eclipse 3.3 and jdk1.6.03 .Pls explain what is the solution to rectify this problem.
Thanks

can anybody help me what this problem is The problem is that the code you wrote is not java.
and how to resolve.Do one of the following
1. Write java
2. Get a compiler/interpreter that takes the code that you are writing and compiles/interprets it.

Similar Messages

Regarding the exception

java.security.AccessControlException: access denied (java.util.PropertyPermission user.dir read)
The following exception was thrown while displaying the data from XML file in Applet window. The applet window shows the exception above.
I placed all the files (.java, .xml and .html) in same folder but still the exception continues. What can I do for?

This has nothing to do with JSP/JSTL.
The exception simply tells you that JVM is not allowed to read the "user.dir" system property. This is a security issue/configuration at the client side. Most probably you need to sign your applet to get it to work. Google "signed applet" for details.

How/where do I contact Mozilla regarding an exception thrown by Firefox which inaccurately (and arrogantly) claims user behavior as the problem?

I'm trying to voice a complaint regarding THIS user interface ("mozilla support") and the exception message returned to me from Firefox. There's also an ACTUAL browser issue I need to resolve. Here are a few details:
(A) I am unable to use Mozilla Firefox for much at all because it's deciding to attempt secure HTTP connections ("https://..."), seemingly at-will. Not all of the sites I've attempted to reach suggest, require, or support secure HTTP connections.
(B) I cannot install Firebug (at least not without another browser or Fiddler), even when trying to "Confirm Security Exception" repeatedly. I get a 200 OK in my developer tools when requesting "https://addons.cdn.mozilla.net/user-media/addons/1843/firebug-2.0.7-fx.xpi", but then receive a notification stating, "The add-on could not be downloaded because of a connection failure on addons.mozilla.org."
(C) The exception message displayed is infuriating and, in my opinion, unacceptable. It claims, "You have asked Firefox to connect securely..." as it begins describing the exception scenario. I can assure that the only thing about which I was explicit was a request to try the same URL again WITHOUT a secure connection. It sounds really arrogant to say, "Here's how YOU screwed up," when it's definitely more along the lines of, "Here's how THE BROWSER APPLICATION screwed up." If a fresh, default install of Mozilla Firefox can't even download Firebug with a healthy Internet connection (yes, in the context of an intranet but no other browsers are giving me grief), how is that my fault? Even if it is my fault, how dare Mozilla speak to its users in such a manner?
(D) I've tried every proxy setting of which I can think, but that doesn't appear to be the issue.
(E) Too much of my time has been wasted today attempting to relay this information to Mozilla. I was forced to navigate through five or so web pages, answering questions, such that I didn't inconvenience YOU. I've boycotted product lines and/or companies for less, and am trying to "bite my tongue" as best I can, but it shouldn't take an hour to submit a constructive feedback message along the lines of "Your browser isn't working for PRACTICALLY ANYTHING and HERE ARE THE DETAILS." I actually had to accumulate complaints in my mind so I didn't lose them throughout your feedback process (since I don't get to actually provide feedback until somewhere around the fifth step of the process).
Thanks,
Mike

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
:[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Regarding "the transaction is no longer active" exception

Hi all
My application is deployed on the weblogic 7 SP2 and whenever i am trying to ship the orders which involves the Database interactions i am getting the following error. I increased the transaction time out periods to 5000 seconds in config.xml but still i am getting following exception.
can anybody tell me what is excat cause of the following exception and what things i need to do to resolve the exception
x.x.x.x: MSG: Failed to get Fulfillment Center Sourced Orders java.rmi.RemoteException: EJB Exception: ; nested exception is:
x.x.x.x: MSG: java.sql.SQLException: The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.AppSetRollbackOnlyException]'. No further JDBC access is allowed within this transaction.The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.AppSetRollbackOnlyException]'. No further JDBC access is allowed within this transaction. TIME: 0EJB Exception: ; nested exception is:
x.x.x.x: MSG: java.sql.SQLException: The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.AppSetRollbackOnlyException]'. No further JDBC access is allowed within this transaction.The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.AppSetRollbackOnlyException]'. No further JDBC access is allowed within this transaction. TIME: 0ERROR CODE: 30006 TIME: 1178858558476
at x.x.x.x.x.ConfirmOrderBean.getAllNewOrdersForStore(ConfirmOrderBean.java:107)
at jsp_servlet._fulfill.__confirm._jspService(__confirm.java:338)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5445)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3105)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
Thanx in advance
Reagrds
Pandurang

pandurang pokharkar wrote:
Hi all
My application is deployed on the weblogic 7 SP2 and whenever i am trying to ship the orders which involves the Database interactions i am getting the following error. I increased the transaction time out periods to 5000 seconds in config.xml but still i am getting following exception.
can anybody tell me what is excat cause of the following exception and what things i need to do to resolve the exception
x.x.x.x: MSG: Failed to get Fulfillment Center Sourced Orders java.rmi.RemoteException: EJB Exception: ; nested exception is:
x.x.x.x: MSG: java.sql.SQLException: The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.AppSetRollbackOnlyException]'. No further JDBC access is allowed within this transaction.The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.AppSetRollbackOnlyException]'. No further JDBC access is allowed within this transaction. TIME: 0EJB Exception: ; nested exception is:
x.x.x.x: MSG: java.sql.SQLException: The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.AppSetRollbackOnlyException]'. No further JDBC access is allowed within this transaction.The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.AppSetRollbackOnlyException]'. No further JDBC access is allowed within this transaction. TIME: 0ERROR CODE: 30006 TIME: 1178858558476
at x.x.x.x.x.ConfirmOrderBean.getAllNewOrdersForStore(ConfirmOrderBean.java:107)
at jsp_servlet._fulfill.__confirm._jspService(__confirm.java:338)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5445)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3105)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
Thanx in advance
Reagrds
PandurangIt is pretty much as it says. While your code is processing this transaction,
in the backround in another thread, the transaction controller has discovered
that this transaction has been running longer than it's configured maximum
time, so the coordinator rolls it back and tells every JDBC object involved
to throw the exception you see the next time any of them are asked to run
another method. Turn on the JTA logging, or instrument your code to show step
by step the progress of your transactions, so you can see what call(s) take
too much time.
Joe

Need inputs regarding the dvd drive on primary ide channel.

Specs:
Motherboard: MSI P35 Neo3 (MS-7935 1.0)
CPU: Intel Core2 Duo E6550
Memory: Team Elite DDR2800 (2x1GB Dual Channel)
Hard drive: Seagate Barracuda 7200.11 500GB 32MB Cache (SATA)
Optical drive: LG GSA-H55L (IDE only) Firmware version 1.02
Graphics card: Gecube HD3870
Chipset: Intel P35/G33/G31 (Rev. A2)
Southbridge: Intel 82801IB (ICH9)
LPCIO: Fintek F71882F
BIOS: AMI V1.1 (11/07/2007)
Hello,
Almost all new motherboards today only have a primary ide channel and the rest are SATA.
I need inputs regarding the dvd drive which is shown in device manager as located on the primary ide channel while the hard drive is located on the secondary channel. Because I would like to update the dvd drive to the latest firmware (version 1.06; to be able to recognize more blank media) but the LG site recommends that the drive (dvd) be located on the secondary ide channel.
I already tried to uninstall every channel from the device manager but all would still be the same after reboot, dvd drive on primary, hard drive on secondary.
Current ide mode in BIOS is set to AHCI+IDE mode, DMA modes are fine (UDMA4 for dvd, UDMA5 for hard drive), boot sequence (1st=HD, 2nd=DVD, 3rd=Floppy drive)
Tried switching to IDE mode only in BIOS but would not detect the optical drive. Never tried RAID+IDE mode since I only have a single hard drive.
I'm not sure but if I try to update the firmware, it might instead try to update the hard drive's firmware instead of the optical drive and make the hard drive unusable.
I would like to know if anybody with this same situation was able to successfully update the optical drive's firmware or is there some way to place the optical drive on the secondary ide channel and the hard drive on primary for me to follow and replicate the process.
Thank you for any replies.

Thanks sir NovJoe for the reply.
Just received the solution from another forum where I posted the same problem.
They said that the flash program for the firmware will detect the drive on its own and would not flash other devices except the optical drive itself. So its pretty safe, and I can confirm this since I just flashed my ODD a little over a while ago and everything went fine. No errors.
Though I'm speaking for the brand of ODD I own and may be different for other brands so take precautions as well. It may be different for the others.

Is there a report to track the exception messages after a MRP run ?

We have a scenario at our client site where MRP run is not optimized to the fullest.
The planners are not trained on how to interpret those exception messages.
They are not trained on how to reschedule / expedite planned orders resulting from an MRP run.
Is there a report out in SAP that keeps track of
1) History of number of exception messages by type ( Expedite/Reschedule/Cancel)
2) History of number of exception messages that were acted on or ignored by the planner.
This is to create metrics on the usage of MRP exception reports by planners.
Appreciate your inputs..

Hi
The exception messages are dynamic and time dependant. You cannot have history of exception message.. If your user is feeling difficult to use standard MRP reports. Create a new report using a function module MD_STOCK_REQUIREMENTS_LIST_API
It gives all MRP data including exception messages.
Regards
Antony

The exception error message was: oracle.jbo.NoDefException: JBO-25002: Defi

Hi,
I added a DFF through create item "flex" in iRecruitment (View applicants page).I am getting the following message:
"The flexfield listener failed while getting the value for segment Job Title from column ASS_ATTRIBUTE1 of the descriptive flexfield with application short name PER and name PER_ASSIGNMENTS. Please contact your system administrator. The exception error message was: oracle.jbo.NoDefException: JBO-25002: Definition AssAttribute1 of type Attribute not found".
Regards
Radhika

Check the DFF you have added according to the error message to confirm that it is setup properly and compiled.
--Shiv

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

The exception Privileged instruction.

Hello,
I builded a dll which communicates with TDC card. But when I call dll from labview. It gives me the error
The exception Privileged instruction.
(0xc0000096) occured in the application at location 0x02e6121c.
I have installed giveio driver.
I am not getting where am I geeting wrong. Can somebody help me out.
Regards,
Maithili

Maithili,
It very much sounds like the error is in the DLL that you built. I assume that you have tested it outside of LabVIEW?
Do you know exactly where the error is happening? You should set a breakpoint on the Call Library Function node and if the error happens before then, then the error is in LabVIEW. If the error happens during the Call Library Function, then the error is in the DLL itself. From there, you can print information from your DLL as you go to see where the crash is happening or use the information in the "Using External Code in LabVIEW" manual that is on your PC in the manuals directory under your LabVIEW directory.
With no files (and no hardware to test if I had), I cannot offer any more advice. If you can do a little more digging or post a
more detailed explaination of your issue, then the community can take another look.
Randy Hoskin
Applications Engineer
National Instruments
http://ww.ni.com/ask

How to raise the exception in function module

Dear abaper's.
I am creating a Function module .In that in' EXCEPTION' Tab i am giving
3 exception .1.NO_DATA_FOUND 2.NO_PRINTER_FOUND 3.SMARTFORM_INTERFACE_NOT_FOUND.
In my coding if this condtion matches i want to raise this exception.how can i do this in my coding .can any one suggest me..
advance thanks,
Warm regards,
Veera

Hi,
if that condition is not satisfied,and u didn't handle that exception while calling function module then in the runtime error u will get the text as the description of the exception in function module definition.
rgds,
bharat.

How to write the exceptions in function module

dear all,
how to write the exceptions in function modules with example.
thanq
jyothi

Hi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

How to handle the Exception in GP using executable callabel object.

Hi all,
I handled an exception in GP using Background callable Object. That is working fine.
(Ex: Exception_No_User_Found). The Problem is I am not able to handle the exceptions for normal callable object. I have done the same thing as i did in background callable object except implementing IGPBackgroundCallableObject Class. I have created an WebDynpro DC Project where in getDescription method i declared an Exception and in execute method of component controller I caught the exception if no user found.
Then i created an callable object for this simple DC project. but that is not working i could not catch the exception. when i execute the process it is asking the User ID if i give the wrong userId it is not refreshing back to the user id input form.
But if i test that simple callable object separately it is throwing an Exception when I give the wrong input..
but the same thing is working fine using background callable object.
I couldn't handle the exception for the simple callable object or executable callable object.
Please If anyone bring me the solution that would be appreciated.
Thanks in advance.
Regards,
Malar.

Hi Shikhil
Thanks for your reply
Please have a look below for exceptions which i am getting in GP and let me know how to handle these exceptions.
1) "Activity could not be read"
2) "Action has been stopped"
3) error while processing the item can not be displayed
if you give any idea/clue how to handle these exceptions then it would be great help to me
Thanks
Sunil

How to handle the plsql error occuring in the exception block

We know how to handle exceptins which occur in BEGIN block.
But am unable to catch the exception in the exception block. Am writing an erroeneous code so that the control will go to exception block and there is also one plsql error, but am unable to handle that error, it's returning the error to the calling environment.
DECLARE
cnt NUMBER(5):=0;
BEGIN
select 'debalina' INTO cnt from dual;
DBMS_OUTPUT.PUT_LINE(to_char(cnt));
EXCEPTION
WHEN invalid_number THEN
DBMS_OUTPUT.PUT_LINE('error has occured inside begin block');
cnt:='deba';
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('error has occured inside begin block');
END;
please suggest me how to catch this exception?

Hi,
DECLARE
cnt NUMBER(5):=0;
BEGIN
select 'debalina' INTO cnt from dual;
DBMS_OUTPUT.PUT_LINE(to_char(cnt));
EXCEPTION
WHEN invalid_number THEN
DBMS_OUTPUT.PUT_LINE('error has occured inside begin block');
cnt:='deba';
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('error has occured inside begin block');
END;
First of all your namee exception which you have posted i.e invalid_number itself is wrong.
You need to use named exception VALUE_ERROR for catching the exception in the main block.
SQL> DECLARE
2 cnt NUMBER(5):=0;
3 BEGIN
4 select 'debalina' INTO cnt from dual;
5 DBMS_OUTPUT.PUT_LINE(to_char(cnt));
6 EXCEPTION
7 WHEN Invalid_number THEN
8 DBMS_OUTPUT.PUT_LINE('error has occured inside main block');
9 end;
10 /
DECLARE
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at line 4
SQL> DECLARE
2 cnt NUMBER(5):=0;
3 BEGIN
4 select 'debalina' INTO cnt from dual;
5 DBMS_OUTPUT.PUT_LINE(to_char(cnt));
6 EXCEPTION
7 WHEN VALUE_ERROR THEN
8 DBMS_OUTPUT.PUT_LINE('error has occured inside main block');
9 end;
10 /
error has occured inside main block
PL/SQL procedure successfully completed.Your doubt regarding catching the exception in exception block, you can execute as below, by nesting a Begin block inside the exception block itself.
SQL> DECLARE
2 cnt NUMBER(35):=0;
3 BEGIN
4 select 'debalina' INTO cnt from dual;
5 DBMS_OUTPUT.PUT_LINE(to_char(cnt));
6 EXCEPTION
7 WHEN Value_error THEN
8 DBMS_OUTPUT.PUT_LINE('error has occured inside main block');
9 Begin
10 cnt:='deba';
11 Exception
12 WHEN OTHERS THEN
13 DBMS_OUTPUT.PUT_LINE('error has occured inside exception block');
14 End;
15 END;
16 /
error has occured inside main block
error has occured inside exception block
PL/SQL procedure successfully completed.Hope your doubt is clear.
Twinkle

How to display the 500-internal server error on the Exception Handler page

Hello
My situation is as follows : JDev 11.1.1.0.2, ADF fusion application, one unbounded task flow containing 2 view pages view1.jspx and error.jspx
The error jspx is marked as the exception handler.
When an error occurs (typically a 500-Internal Server Error) the error.jspx is correctly displayed and shows our message such as 'Don't panic, please call our tech support'
What I would like to do is to display the actual error stack on this page along with our message.
I've searched around and I can't find how to either get the error stack in a bean or what EL expression should be used to get the error stack.
Can anybody help ?
Best Regards
Paul
Switzerland

The error will be the same, but the stack trace will be different, such as
Error 500--Internal Server Error
oracle.adf.controller.security.AuthorizationException: ADFC-0619: Echec de la vérification des autorisations : '/view1.jspx' 'VIEW'.
     at oracle.adf.controller.internal.security.AuthorizationEnforcer.handleFailure(AuthorizationEnforcer.java:145)
     at oracle.adf.controller.internal.security.AuthorizationEnforcer.checkPermission(AuthorizationEnforcer.java:124)
     at oracle.adfinternal.controller.state.ControllerState.initializeUrl(ControllerState.java:639)
     at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart2(ControllerState.java:449)
     at oracle.adfinternal.controller.application.SyncNavigationStateListener.afterPhase(SyncNavigationStateListener.java:44)
     at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.afterPhase(ADFLifecycleImpl.java:529)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchAfterEvent(LifecycleImpl.java:118)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchAfterPagePhaseEvent(LifecycleImpl.java:166)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchAfterPagePhaseEvent
What I would like is to display the above stack trace on the page marked as the exception handler....
Regards
Paul

Special G/L transaction which only appears on the exceptions list in F110

Hi All,
While run payment program by F110 for some of the documents are getting not posted due to the error log 017-Special G/L transaction which only appears on the exceptions list. Can anyone tell me to remove the error log and post the same.
Thanks...

Dear
As Xing said,kindly reomve the Sp G/L indicator assigned in Vendor tab (Sp. G/L transactions for exceptions list) in FBZP > All Company Code and select your company code and assign them in "Sp. G/L transactions to be paid" in vendor tab and try to run F110.
Try it,it will work.
Do revert for any further help.
Regards,

Regarding the Exception JVM INSTR ret 24

Similar Messages

Maybe you are looking for