Regd using of lock object in an abap program

Hi all,
i have created an lock object but doesnot know how to use that lock object in an abap program. can anyone guide me how to use lock object in an abap program.

check this sample for Production Order.
<b>* Lock request for order
call function 'ENQUEUE_ESORDER'
exporting
   aufnr                = p_aufnr
exceptions
   foreign_lock         = 1
   system_failure       = 2
   others               = 3
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
         with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.</b>
Regards
Prabhu

Similar Messages

Where do I use These lock object FM's (Enqueue & D? and How do I use them?

I created lock object for user defined table (zconsist). The system automatically created 2 FM's (Enquiue & Dequeue).
I created a new TCode and accessing this with mulitple users to do some updates and inserts in that above table.
I used INSERT ZCONSIST statement in 5 places in my program (4 include programs).
Where do I use These FM's? and How do I use them?
I mean before inserting which FM I need to use? after immediately what fm used?.
every insert statemnt before i need to use the respective fm? so 5 places i need to call the respective FM is it right?
thank in advance.

Hi Sekhar,
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
check this link for example.
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
tables:vbak.
call function 'ENQUEUE_EZLOCK3'
exporting
mode_vbak = 'E'
mandt = sy-mandt
vbeln = vbak-vbeln
X_VBELN = ' '
_SCOPE = '2'
_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Normally ABAPers will create the Lock objects, because we know when to lock and how to lock and where to lock the Object then after completing our updations we unlock the Objects in the Tables
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
purpose: If multiple user try to access a database object, inconsistency may occer. To avoid that inconsistency and to let multiple user give the accessibility of the database objects the locking mechanism is used.
Steps: first we create a loc object in se11 . Suppose for a table mara. It will create two functional module.:
1. enque_lockobject
1. deque_lockobject
before updating any table first we lock the table by calling enque_lockobject fm and then after updating we release the lock by deque_lockobject.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
GO TO SE11
Select the radio button "Lock object"..
Give the name starts with EZ or EY..
Example: EYTEST
Press Create button..
Give the short description..
Example: Lock object for table ZTABLE..
In the tables tab..Give the table name..
Example: ZTABLE
Save and generate..
Your lock object is now created..You can see the LOCK MODULES..
In the menu ..GOTO -> LOCK MODULES..There you can see the ENQUEUE and DEQUEUE function
Lock objects:
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
Match Code Objects:
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://searchsap.techtarget.com/tip/0,289483,sid21_gci553386,00.html
See this link:
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
Check these links -
lock objects
Lock Objects
Lock Objects
kindly reward if found helpful.
cheers,
Hema.

What is the use for lock object and how to use the lock objects

Hi Guru's,
I am new to ABAP .Can you please clarify the that what is the use of lock object and how to use the loct object .what is use of the Deque & Enque function modules .

hi ,
below are some minfo about lock objects :
Lock Objects
These types of objects are used for locking the access to database records in table. This mechanism is used to enforce data integrity that is two users cannot update the same data at the same time. With lock objects you can lock table-field or whole table.
In a system where many users can access the same data, it becomes necessary to control the access to the data. In R/3 system this access control is built-in on database tables. Developers can also lock objects over table records.
To lock an object you need to call standard functions, which are automatically generated while defining the lock object in ABAP/4 dictionary. This locking system is independent of the locking mechanism used by the R/3 system. This mechanism also defines LUW i.e. Logical Unit of Work. Whenever an object is locked, either by in built locking mechanism or by function modules, it creates corresponding entry in global system table i.e. table is locked. The system automatically releases the lock at the end of transaction. The LUW starts when a lock entry is created in the system table and ends when the lock is released.
Creating Lock Objects
Lock object is an aggregated dictionary object and can be defined by using the following steps:
o From initial data dictionary screen, enter the name for the object, Click Lock object radiobutton and then click on Create. The system displays a dialog box for Maintain Lock Objects screen
o Enter short text as usual and the name for primary table.
-Save
-Select Tables option
From this screen you can:
Select secondary tables, if any, linked by foreign key relationship.
Fields for the lock objects. This option allows you to select fields for objects (R/3 system allows locking up to record level). Lock object argument are not selected by user but are imposed by the system and includes all the primary keys for the table.
1) Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
2) Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
3) Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
Also, last but not the least, locking the object is logical (locking with any enqueue ) .so, you have to use the lock object while trying to access from second program .
reward if helpful ,
Regards,
Ranjita

Can I use logical databases in a WebDynpro ABAP program?

can I use logical databases in a WebDynpro ABAP program?
I need to build a WDA screen that is similar to the SAPDBPNP selection screen (user can find the personnel number based on several criteria, such as last_name/first_name of the employee). So it seems that the existing logical databases have already many nice features already built (like the selection screens, the logic behind the screens etc). So I was wondering if/how I can use them in my WDA application.

Hello, Tiberiu.
You cannot use LDB directly within your WDA programa. BUT, you can fetch results from this LDB by using FM LDB_PROCESS. This function module can be called anytime from any kind of ABAP program. But you will still have to create the screen, as it only processes data, not screens.
Regards,
Andre
PS: Pls reward points if it helps.

About lock object in Dynpro ABAP

Hi Expert,
We develop the Dynpro ABAP program to modify SAP document on EP,
( like Sales Order, Purchase order...ect. ).
In tranditional ABAP program, we use lock object(lock entry) to lock sigle document( SO, PO.. etc. )
In Dynpro ABAP , how to lock the single document ?

You can also use the "ENQUEUE" and "DEQUEUE" function modules to lock records in WDA as well.
Check out the thread [The effect of Session Expiration on Lock Table |The effect of Session Expiration on Lock Table].
Hope it helps.

Restrict to use of two transaction concurrently in ABAP program

Hi,
We have requirement to restrict a user could not using two transaction
at the same time. how could i achieve this. Please throw some light on this.

Hi
--> create a lock object from SE11
Ex : lock object name is EZLOCK
     -->Click on Create
     -->Give the table name
     --> Lock mode (Write, read, Exclusive not cumulative)
     --> Give the Lock parameters
-->save --> activate --> Then system will generate to function module
                      1. ENQUEUE_EZLOCK (for locking)
                      2. DEQUEUE_EZLOCK (For Unlocking)
--> you need to call these function module in respective areas
ex: In PAI of the screen call ENQUEUE F.M and in
    the exit perfroms use DEQUEUE F.M
Ex code to use the f.m's
*To avoid acces of multiple users at a time
CALL FUNCTION 'ENQUEUE_EZCONIC'
    EXPORTING
      mode_zpicci    = 'E'
      zpicnum        = g_fffc
    EXCEPTIONS
      foreign_lock   = 1
      system_failure = 2
      OTHERS         = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    LEAVE TO SCREEN 1000.
ENDIF.
*To unlock the trascation
    CALL FUNCTION 'DEQUEUE_EZCONIC'.
Thanks & Regards
Mallikharjuna Reddy

Calling Business objects Methods from ABAP program

Hi All,
Can anyone please tell me the procedure to call methods of business object(Ex: BKPF) from an ABAP program. My requirement is to check the existence of a object key by using the method EXISTENCE CHECK from BKPF. Please help

Here is an example from the SAP documentation.
[http://help.sap.com/saphelp_nw70ehp2/helpdata/en/c5/e4ad71453d11d189430000e829fbbd/content.htm]
Cheers
Graham Robbo

Plase can anybody tell me how to use SETS (GS01/02/03) in ABAP program

Plase can anybody tell me how to use SETS (GS01/02/03) in ABAP program

http://wiki.sdn.sap.com/wiki/display/Snippets/Reading+Sets+-+GS01+-+GS02+-+GS03

Using function from windows dll in abap program

Hi
How can i use a function from a standard DLL that in c:\winnt\system32.?.
Ami

Hello ami,
here is the solution to your question - I know, a little bit late, but I hope not to late.
Cheers
Stefan
"-Begin-----------------------------------------------------------------
Report ZLOGON.
"-Variables-----------------------------------------------------------
    Data Win32 Type OLE2_OBJECT.
    Data Token Type String Value '0000'.
    Data hToken Type Integer.
    Data phToken Type Integer.
    Data ret Type Integer.
"-Main----------------------------------------------------------------
    Create Object Win32 'DynamicWrapperX'.
    If Win32-Handle > 0.
      "-Define external functions---------------------------------------
        Call Method Of Win32 'Register' Exporting
          #1 = 'advapi32.dll' #2 = 'LogonUserA'
          #3 = 'i=sssuup' #4 = 'r=l'.
        Call Method Of Win32 'Register' Exporting
          #1 = 'kernel32.dll' #2 = 'CloseHandle'
          #3 = 'i=h' #4 = 'r=l'.
        Call Method Of Win32 'Register' Exporting
          #1 = 'kernel32.dll' #2 = 'GetLastError'
          #3 = 'r=u'.
      Call Method Of Win32 'StrPtr' = phToken Exporting
        #1 = Token #2 = 's'.
      Call Method Of Win32 'LogonUserA' = ret Exporting
        #1 = 'bambi' #2 = '.' #3 = 'hugo' #4 = 2 #5 = 0 #6 = phToken.
      If ret <> 0.
        "-Logon successful----------------------------------------------
          Write: 'Logon as bambi user'.
        Call Method Of Win32 'NumGet' = hToken Exporting
          #1 = phToken.
        Call Method Of Win32 'CloseHandle' = ret Exporting
          #1 = hToken.
        If ret = 0.
          Call Method Of Win32 'GetLastError' = ret.
          Write: / ret.
        EndIf.
      Else.
        Call Method Of Win32 'GetLastError' = ret.
        Write: / ret.
      EndIf.
      Free Object Win32.
    EndIf.
"-End-------------------------------------------------------------------
Edited by: Stefan Schnell on Sep 6, 2011 7:07 AM

LOCK OBJECT EXAMPLE

Dear All ,
I would like to know how to use the lock objects in module pool programming . I know that it has to be used when you are updatinng the data . But confused about how to implement . Please help me .

You simply call the assocaited function module ENQUEUE_<lock object name> and pass the key values of the table, then update your table, and call the associated DEQUEUE_<lock object name> function module to release the lock.
Regards,
Rich Heilman

Lock object using RFC

Hi,
in standard transaction I lock an object in an other system using RFC lock(enqueue function) but when I exit from transaction the object in other system is automatically unlocked without using the dequeue function.
Is It the correct behaviour?
Thanks,
Max Boscolo

Hi
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
- Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
- Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
- Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
check this link for example.
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
tables:vbak.
call function 'ENQUEUE_EZLOCK3'
exporting
mode_vbak = 'E'
mandt = sy-mandt
vbeln = vbak-vbeln
X_VBELN = ' '
_SCOPE = '2'
_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Normally ABAPers will create the Lock objects, because we know when to lock and how to lock and where to lock the Object then after completing our updations we unlock the Objects in the Tables
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
purpose: If multiple user try to access a database object, inconsistency may occer. To avoid that inconsistency and to let multiple user give the accessibility of the database objects the locking mechanism is used.
Steps: first we create a loc object in se11 . Suppose for a table mara. It will create two functional module.:
1. enque_lockobject
1. deque_lockobject
before updating any table first we lock the table by calling enque_lockobject fm and then after updating we release the lock by deque_lockobject.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
GO TO SE11
Select the radio button "Lock object"..
Give the name starts with EZ or EY..
Example: EYTEST
Press Create button..
Give the short description..
Example: Lock object for table ZTABLE..
In the tables tab..Give the table name..
Example: ZTABLE
Save and generate..
Your lock object is now created..You can see the LOCK MODULES..
In the menu ..GOTO -> LOCK MODULES..There you can see the ENQUEUE and DEQUEUE function
Lock objects:
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
Match Code Objects:
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://searchsap.techtarget.com/tip/0,289483,sid21_gci553386,00.html
See this link:
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
Check these links -
lock objects
Lock Objects
Lock Objects
Regards
Anji

Can i use the SAP standard package for lock object creation ?

Dear Guru ,
I want to create a new lock ojbect for my abap program .
When i completed the creation , SAP required a new request and it said the object only can be imported to SAP standard package .
But i saw the help from SAP said :
>* Package begins with A-S or U-X:
>These packages are for SAP standard objects. Customer objects cannot be created in them. Changes to objects of these packages are recorded by the Transport Organizer (Request management) and can be transported (see field transport layer.
In this case , Can i use one of the SAP standard package for this creation ? Does it will affect the SAP system ( such as the system upgrade ) ?
Thanks .
Best Regards,
Carlos Zhang
Moderator message - Please do not use code tags to format text - it should only be used for code
Edited by: Rob Burbank on May 25, 2010 11:12 AM

Hi Carlos...
First , You will never be able to use any standard SAP Package for your custom programs. So don't go for it.
So in your case what you need to do is , when you save your Lock object ,
- if you want Transport request to be created , then
in the screen shown you need to enter the Z package name (the same package as that of your ABAP Program)
or
-if you want it to be stored as local object , then
specify package as $tmp
Regards,
Uma

Where we use lock objects in our coding like report

what is the purpose of lock objects s? how we use them in real time? like in devoloping reports?

Hi,,.
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
- Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
- Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
- Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
Check these links
Re: Lock Objects
http://help.sap.com/saphelp_47x200/helpdata/en/ce/931bb5c79911d5993e00508b6b8b11/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapdevelopment.co.uk/dictionary/lock_enqueue.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
- Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
- Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
- Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
- Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
- Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
- Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
GO TO SE11
Select the radio button "Lock object"..
Give the name starts with EZ or EY..
Example: EYTEST
Press Create button..
Give the short description..
Example: Lock object for table ZTABLE..
In the tables tab..Give the table name..
Example: ZTABLE
Save and generate..
Your lock object is now created..You can see the LOCK MODULES..
In the menu ..GOTO -> LOCK MODULES..There you can see the ENQUEUE and DEQUEUE function
Lock objects:
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
Match Code Objects:
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://searchsap.techtarget.com/tip/0,289483,sid21_gci553386,00.html
See this link:
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
Lock objects are used to synchronize access to the same data by more than one program.
General information about the lock mechanism.
You can synchronize access by several programs to the same data with a logical lock mechanism. This lock mechanism fulfills two main functions:
A program can tell other programs which data records it is just reading or changing.
A program can prevent itself from reading data that is just being changed by another program.
When accessing data records, the records just being edited by other programs can be identified by the entry in the lock table. Such an entry for the lock must define a number of fully specified key fields, that is either a value is passed for the key field or this field is locked generically.
To set locks, a lock object must be defined in the ABAP Dictionary. When this lock object is activated, two function modules (see Function Modules for Lock Requests) are generated with the names ENQUEUE_<lockobjectname> and DEQUEUE_<lockobjectname>.
If data records are to be locked, you must call function module ENQUEUE_<lockobjectname>. The values of the key fields that specify the records to be locked are passed for all the tables contained in the lock object when the function module is called. There is a generic lock if a value is not passed for all the key fields. The function module writes the appropriate lock entry (see Example for Lock Objects). If another program also requests a lock, it will be accepted or rejected depending on the lock mode (see Lock Collisions). The program can then react to this situation.
Locked data records can be unlocked by calling function module DEQUEUE_<lockobjectname>. The key values and the lock mode used to set the lock must be passed to the function module.
Creating Lock Objects
Procedure
Select object type Lock object in the initial screen of the ABAP Dictionary, enter an object name and choose Create. The name of a lock object should begin with an E (Enqueue).
The maintenance screen for lock objects is displayed.
Enter an explanatory short text in the field Short text.
You can then use the short text to find the lock object at a later time, for example with the R/3 Repository Information System.
Enter the name of the primary table of the lock object.
All other tables in the lock object must be linked with the primary table using foreign keys. There are also some restrictions on the valid foreign key relationships.
Select the lock mode of the primary table in the field below it.
The lock mode is used as the default value for the corresponding parameters of the function modules generated from the lock object.
Choose Add if you want to lock records in more than one table with the lock object.
A list of all the tables linked with the primary table using valid foreign keys is displayed. Select the appropriate table. The lock mode of the primary table is copied as lock mode. You can change this setting as required, for example you can assign the lock mode separately for each table.
Similarly, you can add a table linked with the secondary table just added with foreign keys. To do this, place the cursor on the name of the secondary table and choose Add.
If no lock mode is assigned to a table, no lock is set for the entries in this table when the generated function modules are called. You should not assign a lock mode if a secondary table was only used to define a path between the primary table and another secondary table with foreign keys.
Save your entries.
A dialog box appears in which you have to assign the lock object a development class.
You can (optionally) exclude lock parameters (see lock objects) from the function module generation on the Lock parameter tab page. This makes sense for example if you always want to lock a parameter generically.
To do this, simply deselect the Weight flag for the parameter. The parameter is not taken into consideration in the generated function modules. This parameter is then always locked generically.
The name of a lock parameter is usually the name of the corresponding table field. If two fields with the same name are used as lock parameters in the lock object from different tables, you must choose a new name for one of the fields in field Lock parameter.
You can define whether the function modules generated from the lock object should be RFC-enabled on the Attributes tab page.
If you set the Allow RFC flag, the generated function modules can be called from within another system with Remote Function Call.
If you permit Remote Function Calls for an existing lock object, you must ensure that the generated function modules are called from within an ABAP program with parameters appropriate for the type. You should therefore check all programs that use the associated function modules before activating the lock object with the new option.
Choose .
Result
When you activate the lock object, the two function modules ENQUEUE_<lockobjectname> and DEQUEUE_<lockobjectname> are generated from its definition to set and release locks.
Regards
Vasu

Lock Object Confusion

Hello All ,
I have create one Module Pool program.it is having three t code for creation ,change and display. it is having two table Header and details table.
I have decided to go for shared lock as per requirement. That's why created on lock object with the help of t code se11 .
My problem is how do I call that lock object in program, because all the lock object are called using called function PATTERN. When I am also trying to do the same it give me message function not found.
Can some one tell me :
1 . How do I called lock object in my program.
2. Lock object : lock parameter are there ,Means the primery key of lock object on the logic of this the lock object is called.
3. would the same lock I can called for Create and change also. Would i work ?. At the same time other operation can perform.
Please provide me the ansower of the question.
regards
Swati namdeo

Hi
Hope it will help you.
Pls reward if help.
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
- Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
- Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
- Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
check this link for example.
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
tables:vbak.
call function 'ENQUEUE_EZLOCK3'
exporting
mode_vbak = 'E'
mandt = sy-mandt
vbeln = vbak-vbeln
X_VBELN = ' '
_SCOPE = '2'
_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Normally ABAPers will create the Lock objects, because we know when to lock and how to lock and where to lock the Object then after completing our updations we unlock the Objects in the Tables
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
purpose: If multiple user try to access a database object, inconsistency may occer. To avoid that inconsistency and to let multiple user give the accessibility of the database objects the locking mechanism is used.
Steps: first we create a loc object in se11 . Suppose for a table mara. It will create two functional module.:
1. enque_lockobject
1. deque_lockobject
before updating any table first we lock the table by calling enque_lockobject fm and then after updating we release the lock by deque_lockobject.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
GO TO SE11
Select the radio button "Lock object"..
Give the name starts with EZ or EY..
Example: EYTEST
Press Create button..
Give the short description..
Example: Lock object for table ZTABLE..
In the tables tab..Give the table name..
Example: ZTABLE
Save and generate..
Your lock object is now created..You can see the LOCK MODULES..
In the menu ..GOTO -> LOCK MODULES..There you can see the ENQUEUE and DEQUEUE function
Lock objects:
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
Match Code Objects:
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://searchsap.techtarget.com/tip/0,289483,sid21_gci553386,00.html
See this link:
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
Check these links -
lock objects
Lock Objects
Lock Objects

Lock Object - Release only by Dequeue

Hi ,
I am using a Lock object but the Locks are getting released as soon as i come out of the program.
Is there a way to hold the locks till i call Dequeue FM?

Hello,
If you don't explicitly release the locks using DEQUEUE* functions they are released implicitly(e.g., DEQUEUE_ALL).
Details regd. when the locks are released read this online documentation: [http://help.sap.com/saphelp_nw04/helpdata/en/c2/2d7037ecc92a7ee10000009b38f8cf/frameset.htm]
BR,
Suhas

Regd using of lock object in an abap program

Similar Messages

Maybe you are looking for