Relation EQUI EQUI- EKKO to get PO number from EKKO

hi,
i would like to take the PO number (from EKKO-EBELN) starting from the SERNR in the EQUI, what is the relation? there are some functions?
thanks

my guess:
EQUI-SERNR ==> EQUI-MATNR = EKPO-MATNR => EKPO-EBELN (=EKKO-EBELN)

Similar Messages

FM to get Personel Number from USER ID

Hi,
Is there any FM to get Personel Number from the USER ID(sy-uname).
Thank you,
Ramu N.

Hi Ramu,
You can find the user-id & Personnel Number in the table PA0105.
select single PERNR from pa0105 into PERSONEELSNUMMER
where usrid eq USER_ID
and endda eq '99991231'.
hope this helps!
best regards,
Thangesh

How to get page number from the PDF using Javascript

Hi,
We are having list of Single page PDF. The pdf are named in the order,
ISBN_Author_01.PDF (with real page number as i)
ISBN_Author_02.PDF (with real page number as ii)
ISBN_Author_03.PDF (with real page number as iii)
ISBN_Author_04.PDF (with real page number as 1)
ISBN_Author_05.PDF (with real page number as 2)
ISBN_Author_06.PDF (with real page number as 3)
ISBN_Author_nn.PDF (with real page number as 500)
Here each pdf has a page number and in sequential order.
The task is to check whether all the pdfs are in sequential order (i.e i, ii, iii, 1, 2, 3). If any page is missing, the script should throw an error report.
To do this task, I am writing a Javascript to get the real page number from the PDF.
Can anybody help me how to get the page number from the PDF using Javascript.
Thanks,
Gopal

The "real" page number within a PDF is the count of the physical page starting at 0, zero.
pageNum numPages
The number printed on each page is the page label.
setPageLabels getPageLabel
You will have to open each PDF and your script would need to know the page label for that file. I would expect you would need to build a 2 dimensional array of the file names and the page label for the page within that array.

How to get week number from date

Hi,
please mention how to get the number of week from a particular date using fn module?

Hi Debarshi,
Use FM <b>DATE_GET_WEEK</b>
Reward points if helpful.
Regards,
Hemant

Can you get IMEI number from device ID

Dear all,
We have had a user who's phone was stolen so we are trying to get the phon blacklisted. We need the IMEI number but I don't have this obviously so I wondered if Apple can get the IMEI number from the device ID which I can get from office 365.
Thanks for any help.
Ed

greenkomodo wrote:
I can't unfortunately, we buy a hardware only device and don't register to a number so it isn't tracked on their system for the user what device they last used.
If the phone was used on a cellular carrier, it is likely that, even though you didn't buy the phone from the carrier, that the IMEI registered with the carrier's system when the phone was activated.

Get IDoc-number from flat IDoc using dynamic configuration

Dear experts
In an IDoc2File scenario I have added the IDoc-number to dynamic configuration using the folling code in an UDF:
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey FileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","DOCNUM");
conf.put(FileName, a);
The information is stored in the SOAP message
<SAP:DynamicConfiguration SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="DOCNUM">0000000000012345</SAP:Record>
</SAP:DynamicConfiguration>
Can anybody tell me how I can access this information in the "variable substitution" section of the CC? Perhaps something like "message:docnum"?
Additional information:
Taking the IDoc-number from the payload using e.g. "payload:ORDERS05,1,IDOC,1,EDI_DC40,1,DOCNUM,1" does not work, since the XML-IDoc has been converted to an flat-IDoc.
Thanks in advance for any good ideas
Markus

Dear Rodrigo and Sarvesh
Thanks for your help so far! I applied your hints and now it is working fine.
But now I have the following additional questions
1.) My message mapping only maps the input IDoc to an output IDoc of the same type and structure. The MM is only required to process the UDF. Is there another, better solution to achieve my requirement that the IDoc-number shall be part of the filename?
2.) In the CC you have the possibility to use temporary files (section "Processing", Option "Put File" = "Use Temporary File". I think this will not work with the given solution, will it?
To possibly help somebody else or clarify the mechanism once again, I wrote down how my solution now looks like.
My UDF in the message-mapping looks like this
- Input = DOCNUM of IDoc, e.g. ORDERS05/IDOC/EDIDC/DOCNUM
- Outpt = DOCNUM of IDoc, e.g. ORDERS05/IDOC/EDIDC/DOCNUM
- UDF:
public String putDynamicConfiguration(String docnum, Container container) throws StreamTransformationException{
try
     DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
     DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
     String filename = "Prefix_" + docnum + ".txt";
     conf.put(key, filename);
     return docnum;
catch (Exception e)
     return docnum;
In the CC the settings are now as follows
File Name Scheme = . -> only a dot or something else, because this field is obligatory, even if it is not used in this case.
Variable substitution (...)
    Enable -> unchecked
Adapter-Specific Message Attributes
    Use Adapter-Specific Message Attributes -> checked
    Fail If Adapter-Specific Message Attributes Missing -> checked
    File Name -> checked
    Directory, File Type, Temporary Name Scheme for Target File Name -> unchecked
When I send an IDoc to PI and view the Adapte-Engine Version of the message (the SOAP-document, not the payload) I can find the Filename:
<SAP:DynamicConfiguration SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">Prefix_0000000000012345.txt</SAP:Record>
</SAP:DynamicConfiguration>

Get records number from internal table with condition.

Internal table itab got more than 1000 records,now i need to get the number of records with condition that itab-field1 = 'XXXX'.
actully, i got an inefficient logic to count the number in a loop statement. is there better way to implement it?

hello,
Every time assigning data into temp table and delete may that may not be much efficient. You can check in loop logic how much time is taken. You can check the below code. here I am trying to check the numbers of plant for for one material.
In this logic material is the first field. So if there is option to make the required field in to the 1 st position then it will be nice.
TYPES: BEGIN OF x_count,
        matnr TYPE matnr,
        count TYPE i,
       BEGIN OF x_count.
DATA: i_marc TYPE STANDARD TABLE OF marc,
      i_count TYPE STANDARD TABLE OF x_count,
      wa_count TYPE x_count.
FIELD-SYMBOLS: <wa_marc> TYPE marc.
SELECT * UP TO 1000 ROWS
FROM marc
INTO TABLE i_marc.
IF sy-subrc = 0.
SORT i_marc BY matnr.
LOOP AT i_marc ASSIGNING <wa_marc>.
    wa_count-count = wa_count-count + 1.
    AT END OF matnr.
      wa_count-matnr = <wa_marc>-matnr.
      APPEND wa_count TO i_count.
    ENDAT.
ENDLOOP.
ENDIF.
Thanks
Subhanakr

Getting a number from (char)System.in.read

I am very new to java so please forgive the seemingly basic question.
When I try to simply get a number for input into a program, and I use (char)Sysytem.in.read(),
it only gives me the acutual Keyboard number (ie.. 2 = 50, 1 = 49).
Even when I try to parse an Integer using :
public static void getNum( ) throws NumberFormatException
     char char1;
     String String1 = new String ("");
     int X;
     char1 = (char)System.in.read();
while ( char1 <= '0' && char1 <= '9' )
     String1 = String1 + char1;
     char1 = (char)System.in.read();
     X = Integer.parseInt(String1);
System.in.read();
     return X;
     System.out.println(X);
This gives me a usable number but if I try to use a decimal point in the number and convert it to a double, it wont work because the decimal wont read into the (char)System.in.read();
Anyone have a suggestion ?

Hope this helps - although haven't tried out your code.
System.in.read() returns the next byte of information in the buffer, if the buffer is empty it'll prompt for input (passing control back to hardware/OS). Say the user types 10.56 and presses return - now the buffer has the information 10.56 plus a LF(line-feed) and and a CR(carriage return) character (this is how it is from DOS anyway) and control is passed back to your program which gets only the first byte of information from the buffer, which in this case would represent the character '1', only it doesnt get back the character '1', it gets an int type which represents the byte of information which represented the character '1' to your hardware/OS system (which I believe is decided by the machine local encoding system).
By casting this int to a char by the expression
(char) System.in.read()
its converted to the original character that the int represented from the buffer
If you were using System.in.read() only you would have to reconstruct the input as a String by concatenating the char's one by one only ignoring the last 2 bytes of the buffer (which captured the LF and CR).
Say you had the resulting String from the above reconstruction in the variable s1,
you could then attempt to convert the resulting String to a floating-point type (say a double) using
d = Double.parseDouble(s1)
where d was a double type (as mentioned by abnormal)
You'd have to put this in a try/catch statement because the user could type something invalid like 10.6a5
which would cause the parseDouble() method to throw an exception which unless you handle it yourself will cause your program to abend with a NumberFormatException.
This all seems to be a lot of hard work for input apparently so simple, which is why abnormal suggest using a BufferedReader to overcome the problem of 'manually' stripping the CR and LF from the input leaving you with just a String. I must admit I'm not sure of why abnormal's code wouldn't work for you. But I thought I'd post this anyway because you might find the background info helpful.

How can I get Notification Number from Material Document?

Can you please tell me that how can I get Notificatin Number(QMEL-QMNUM) from Material Document(MSEG-BELNR)?
Regards,
Subhasish

This question is closed but unanswered.

Applescript to get phone number from name

Hi, I am trying to make an applescript that will simply return a phone number from contacts when given a name. It is part of a larger script, but everything else is already working. It seems like it would be pretty simple, but nothing that I have tried will work.
Here is my best guess:
tell application "Contacts"
get phone of "John Doe"
end tell
I just need to set a variable to equal the phone number that is returned. Thanks in advance.

Hello
You may try something like this.
set n to "John Doe"
tell application id "com.apple.AddressBook"
    set p to value of phone 1 of (person 1 whose name = n)
    set q to {label, value} of phones of (people whose name = n)
    set r to value of phone 1 of (person 1 whose name = n) whose label = "home"
end tell
return {p, q, r}
Note that database may contain multiple records for the same person name and a person's record may contain multiple phone numbers.
Tested with AddressBook 5.0.3 under OS X 10.6.8.
Regards,
H

Getting quotation number from service order

hi
i have a situation where i need to find the quotation number created by DP80 from a service order.
    i'm able to find service order number from quotation but that does not solve my problem. i need to find the quotation number from service order number.
   pl help.
thanks in advance

hi Koustav,
    I'm in same situation as yours. i need to update preceding Qutation from the service order and only if a precticular item category is precent in service order.
As u have already worked on Qutation n service order stuff.. can u plz suggest me some thing.
thanks in Advance

Getting shipment number from handling units

Hi Abapers,
is there any bapi avaible to get the shipment number by passing handling unit identification number.
Thanks & Regards,
Swapna .

Hi all,
I found the solution to fetch shipment number based on handling unit.
In table level, Go to SE11 transaction.
Enter table name : VEKP.
Pass VENUM(handling unit number).
VPOBJ = 04
and Execute.
See the field value VPOBJKEY.
This value is shipment number.
If u got to table VTTK and pass this shipment number obtained previously. it will have entry with this shipment number.
Thanks,
Swapna p

Is there anyway to get serial number from itunes for my stolen ipod?

Help.. My ipod 5th gen was stolen..is there anyway to get the Serial Number off itunes??

Yes, if you have any backups on file. If you are using windows, go to edit>preferences, if on a mac, go to itunes>preferences.
When you are in the preferences page, choose the device tab.
Look for a backup of the ipod, if there is, you can just hover your mouse over the backup, dont click or anything, but after a moment or two, a little box will pop up with you serial number.

Issue with getting sequance number from db in EO for a primary key column

Hello Experts,
we are working on ADf 11.1.1.2.
we are facing issue with sequence number in our UAT instance.
dev instance and sit instances did not gave any issues.
We have one EO in that for one attribute we have given the value as
new oracle.jbo.server.SequenceImpl("XXOZF_QA_CODE_S", object.getDBTransaction())).getSequenceNumber()
in order to get the primary key column value from db sequance .
<TransientExpression><![CDATA[(
new oracle.jbo.server.SequenceImpl("XXOZF_QA_CODE_S", object.getDBTransaction())).getSequenceNumber()
]]></TransientExpression>
now the issue is "I have incremented the sequence number through SQL plus from 10 to 20. And created a record on a VO which is based on above EO.
But the sequence iam getting is 11 instead of 21."
This is happening only in our uat instance all other instances are working fine.
Can any one tell us how this frame work is still pointing tho the old sequnce number.
regards
Gayaz

Also make sure that your sequence has NOCYCLE option.
some thing like this:
CREATE SEQUENCE test_seq
START WITH 1
INCREMENT BY 1
NOCACHE
NOCYCLE;

Regular expression - get longest number from string

I believe it is easy one but I can't get it.Lets say I have a string 'A1_1000' I want to substract the 1000 using regular expression. When I feed Match regular expression I get '1' which is not the longest number. I know other ways of doing that but I want clean solution in one step. Does anybody knows the right regular expression to accomplish that? Thanks!
LV 2011, Win7
Solved!
Go to Solution.

ceties wrote:
This is the best solution I was able to come with. I am just wondering if there is "smoother way" without the cycle.
Since multiple checks are required I would tend to beieve that we do have to loop through the possibilities. in this example
I start check at offset "0" into the string for a number. Provided i find a number I check if it is longer that any previous number I found and if so save the new longer number in the shift register.
Have fun!
Ben
Message Edited by Ben on 04-15-2009 09:23 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Find_Longest.PNG ‏33 KB

Relation EQUI EQUI- EKKO to get PO number from EKKO

Similar Messages

Maybe you are looking for