Remote config
I'm trying to re-configure an airport express over WAN using the airport admin utility.
I know the IP (static) of the remote Express and I know that remote admin and SNMP are enabled. I also know the admin password.
I can do a traceroute to the Express, so I know that it is on.
When I try and connect using the Airport Admin Utility, I get a 'unable to read configuration' error message.
Any ideas how to do this?
Thanks RichB,
I have a direct connection between myself and the remote AE. No firewall running on my machine and no NAT/Router in the way. I have a static IP as does the remote AE.
Little snitch detects that I am trying to connect to TCP port 5009 and UDP port 161, which I allow. The admin tries to connect but always fails.
I know the remote AE is working as I can ping it and traceroute to it. Ping times are approx 155ms, so latency shouldn't be an issue. I know the admin password as I set it up and I know that remote access is enabled.
looks like I'll have to get someone on the LAN to access it, as it will not work from the WAN.
Similar Messages
-
How to add more than a single remote service destination to
the remote-config.xml file? When I try to add a new destination tag
in the remote-config.xml I get an error when calling the mxml file
in the browser. Please help.Have you seen the example remoting-config.xml file in the
/resources/config directory that is laid down during an FDS
installation?
destination elements are children of the service element.
<service ...>
<destination id="dest1">
</destination>
<destination id="dest2">
</destination>
</service>
Perhaps your SWF didn't get updated with the new
configuration file? You need to recompile the SWF in order to get
the new configuration information into it... also, you'd need to
restart the app server if you change the config file. If you're
using Flex Builder to compile an .mxml file then you may need to
force a recompile with the Clean... option as it may have not
noticed that the services-config.xml include file
remoting-config.xml changed? -
Revision: 1705
Author: [email protected]
Date: 2008-05-14 08:58:31 -0700 (Wed, 14 May 2008)
Log Message:
1) Add a security constrain for MBeanObjectNameResolver destination in remoting-config.xml for WebSphere deployment
2) Update the MBean tests accordingly and correct a typo
3) Also make some additional ProxyServiceMBeanTest to solve a timing issue when getting MBean attributes on WAS
4) update the jgroups-udp.xml and set bind_to_all_interfaces to fall since it prevents server from startup when IPv6 is enabled on Windows
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/jgroups-udp.xml
blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/remoting-config.mods.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/MBean/proxyservice/HTTPDestinati onTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/MBean/proxyservice/ProxyServiceM BeanTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/MBean/proxyservice/SOAPDestinati onTest.mxmlI guess the reason was that I wrote
<login-config>
<auth-method>Basic</auth-method>
</login-config>
instead of required
<login-config>
<auth-method>BASIC</auth-method>
</login-config>
At deploy time, I got no error message. At usage time, I just got this AccessLocalException. That's not really nice ...
Merten -
SSL Flex Remote Object - no remoting-config file
I realize that this topic has been discussed a lot, and I think
I have the solution figured out.
The problem is that I have to edit the remoting-config file - and there isn't one!
I've hunted high and low on the server, and I just don't have the file.
We are using Coldfusion 8,0,0,176276 Enterprise, and I have an instance for my flex applicaitons (we have multiple instances running, and none of them have the file). The server is running on a Solaris VM.
How do I fix this problem??
Thanks!
JennMy context root is specified as the default "/" When I remove the context root variable from the services-config.xml, it can't find the file. I don't know where I can change context root, but I am confused as to what it should be, regardless.
Add the -context-root to the compiler options, just like -services and set it to an empty string
-services="/Applications/JRun4/servers/cfusion/cfusion-ear/cfusion-war/WEB-INF/f lex/servics-config.xml" -context-root="" -
Configure remote-config for calling java class
Hi...all
i'm newbie, i got trouble for configure remote-config in flex project
how to configure remote-config.xml, if i have java class like below
package org.springframework.flex.samples.secured;
import java.util.Map;
import org.springframework.flex.security.AuthenticationResultUtils;
public class SecurityHelper {
public Map<String, Object> getAuthentication() {
return AuthenticationResultUtils.getAuthenticationResult();
please help me.....i'm newbie and wanna learnin
thanksHi,
May be this could be of good help to you
http://livedocs.adobe.com/blazeds/1/blazeds_devguide/
Thanks,
Balaji -
Remote Config question - Newbie :)
I have an Intel Xserve and I am taking it to my co-location facility to mount it and it has a fresh install of Leopard. How do I configure it remotely if it has not been assigned an IP address?
Is it best to boot it at my office and configure it with all the IP addresses and then take it over and mount it?
Sorry to sound lame but I know older versions of server had issues with IP addresses and I want to do this correctly.If they have DHCP active at your colocation facility you can use the address it is given to connect and configure using admin tools.
It may be better to set up a dummy network to test and install. -
Remote config 7900 series Phone?
Hello everyone,
Happy China National Day !
How do I TELNET / SSH configuration 7900 series Phones ?
Some Phones in reach far away places, I want to remotely turn [alternative TFTP] option.
Thx~
Online waiting...That'll depend entirely on the model of your phone & the firmware running.
79X0 will support SSH, for example, when I load SIP firmware. I don't know if SCCP is allowed.
When you are able to SSH (only), you can do some show, debug, etc. mYou can also do some limited configurations but you CAN'T set the directory of the call buttons.
Sent from Cisco Technical Support Nintendo App -
LIRC-0.9.1: Remote not working, scancodes, config issues
Hi,
I'm using arch (kernel 3.16.0-2-ARCH #1 SMP PREEMPT x86_64 GNU/Linux), a TechnoTrend USB IR Receiver and my custom remote (not covered by existing configs). I installed lirc and lirc-utils via testing repo (lirc-0.9.1). My problem is that I can access my device, but irw gives me no output at all.
At first some outputs:
ir-keytable:
Found /sys/class/rc/rc0/ (/dev/input/event17) with:
Driver ttusbir, table rc-tt-1500
Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
Enabled protocols: RC-5
Name: TechnoTrend USB IR Receiver
bus: 3, vendor/product: 0b48:2003, version: 0x0101
Repeat delay = 500 ms, repeat period = 125 ms
output of "ir-keytable -t" for numbers 1-6 on my remote:
Testing events. Please, press CTRL-C to abort.
1408117586.815011: event type EV_MSC(0x04): scancode = 0x01
1408117586.815011: event type EV_SYN(0x00).
1408117586.934967: event type EV_MSC(0x04): scancode = 0x01
1408117586.934967: event type EV_SYN(0x00).
1408117587.702986: event type EV_MSC(0x04): scancode = 0x02
1408117587.702986: event type EV_SYN(0x00).
1408117588.366958: event type EV_MSC(0x04): scancode = 0x03
1408117588.366958: event type EV_SYN(0x00).
1408117588.486983: event type EV_MSC(0x04): scancode = 0x03
1408117588.486983: event type EV_SYN(0x00).
1408117589.094926: event type EV_MSC(0x04): scancode = 0x04
1408117589.094926: event type EV_SYN(0x00).
1408117589.214920: event type EV_MSC(0x04): scancode = 0x04
1408117589.214920: event type EV_SYN(0x00).
1408117590.926837: event type EV_MSC(0x04): scancode = 0x05
1408117590.926837: event type EV_SYN(0x00).
1408117591.046834: event type EV_MSC(0x04): scancode = 0x05
1408117591.046834: event type EV_SYN(0x00).
1408117592.446769: event type EV_MSC(0x04): scancode = 0x06
1408117592.446769: event type EV_SYN(0x00).
1408117592.566769: event type EV_MSC(0x04): scancode = 0x06
1408117592.566769: event type EV_SYN(0x00).
My remote config file looks like this:
# Please make this file available to others
# by sending it to <[email protected]>
# this config file was automatically generated
# using lirc-0.9.0(devinput) on Thu Aug 7 15:10:35 2014
# contributed by
# brand: Test
# model no. of remote control:
# devices being controlled by this remote:
begin remote
name BlackFlatOne
bits 16
eps 30
aeps 100
pre_data_bits 16
pre_data 0x0001
post_data_bits 32
post_data 0x00000001
gap 132799
toggle_bit 0
begin codes
KEY_POWER 0x0c
KEY_MUTE 0x0a
KEY_SELECT 0x38
KEY_Z 0x0f
KEY_1 0x01
KEY_2 0x02
KEY_3 0x03
KEY_4 0x04
KEY_5 0x05
KEY_6 0x06
KEY_7 0x07
KEY_8 0x08
KEY_9 0x09
KEY_0 0x00
KEY_TV 0x1e
KEY_LEFT 0x11
KEY_RIGHT 0x10
KEY_UP 0x20
KEY_DOWN 0x21
KEY_ENTER 0x0d
KEY_CHANNELUP 0x12
KEY_CHANNELDOWN 0x13
KEY_VOLUMEUP 0x2b
KEY_VOLUMEDOWN 0x2c
KEY_STOP 0x0b
KEY_RECORD 0x1f
KEY_CAMERA 0x0e
KEY_ESC 0x29
end codes
end remote
I start lirc manually with
lircd --driver=devinput --device=/dev/input/by-id/usb-TechnoTrend_AG_TT-USB_Infrared_Device-event-ir BlackFlatOne -n
After starting lirc, I start irw, but I get no response at all when pressing buttons on my remote.
I already tried a
cat /dev/input/by-id/usb-TechnoTrend_AG_TT-USB_Infrared_Device-event-ir
(lirc and irw not running, of course) and this gives me cryptic symbols when pressing buttons on my remote, so the IR receiver doesn't seem to be the problem.
I'm wondering if the scancodes in my config are ok for a devinput-device, because the latest "official" lircd.conf.devinput looks like that:
# generated by devinput.sh
begin remote
name devinput
bits 16
eps 30
aeps 100
pre_data_bits 16
pre_data 0x0001
post_data_bits 32
post_data 0x00000001
gap 132799
toggle_bit 0
begin codes
KEY_0 11
KEY_102ND 86
KEY_1 2
KEY_2 3
KEY_3 4
KEY_4 5
KEY_5 6
KEY_6 7
KEY_7 8
KEY_8 9
KEY_9 10
KEY_A 30
KEY_AB 0x196
KEY_ADDRESSBOOK 0x1ad
KEY_AGAIN 129
So I'm wondering about the different lengths of the keycodes (e.g. 0x0d vs 0x1ad -> 2 vs 3 digits).
Can anyone help me out with this issue ?
Am I missing something ?
How do I have to format the scancodes/keycodes the correct way for version 0.9.1 ?Hi,
I'm using arch (kernel 3.16.0-2-ARCH #1 SMP PREEMPT x86_64 GNU/Linux), a TechnoTrend USB IR Receiver and my custom remote (not covered by existing configs). I installed lirc and lirc-utils via testing repo (lirc-0.9.1). My problem is that I can access my device, but irw gives me no output at all.
At first some outputs:
ir-keytable:
Found /sys/class/rc/rc0/ (/dev/input/event17) with:
Driver ttusbir, table rc-tt-1500
Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
Enabled protocols: RC-5
Name: TechnoTrend USB IR Receiver
bus: 3, vendor/product: 0b48:2003, version: 0x0101
Repeat delay = 500 ms, repeat period = 125 ms
output of "ir-keytable -t" for numbers 1-6 on my remote:
Testing events. Please, press CTRL-C to abort.
1408117586.815011: event type EV_MSC(0x04): scancode = 0x01
1408117586.815011: event type EV_SYN(0x00).
1408117586.934967: event type EV_MSC(0x04): scancode = 0x01
1408117586.934967: event type EV_SYN(0x00).
1408117587.702986: event type EV_MSC(0x04): scancode = 0x02
1408117587.702986: event type EV_SYN(0x00).
1408117588.366958: event type EV_MSC(0x04): scancode = 0x03
1408117588.366958: event type EV_SYN(0x00).
1408117588.486983: event type EV_MSC(0x04): scancode = 0x03
1408117588.486983: event type EV_SYN(0x00).
1408117589.094926: event type EV_MSC(0x04): scancode = 0x04
1408117589.094926: event type EV_SYN(0x00).
1408117589.214920: event type EV_MSC(0x04): scancode = 0x04
1408117589.214920: event type EV_SYN(0x00).
1408117590.926837: event type EV_MSC(0x04): scancode = 0x05
1408117590.926837: event type EV_SYN(0x00).
1408117591.046834: event type EV_MSC(0x04): scancode = 0x05
1408117591.046834: event type EV_SYN(0x00).
1408117592.446769: event type EV_MSC(0x04): scancode = 0x06
1408117592.446769: event type EV_SYN(0x00).
1408117592.566769: event type EV_MSC(0x04): scancode = 0x06
1408117592.566769: event type EV_SYN(0x00).
My remote config file looks like this:
# Please make this file available to others
# by sending it to <[email protected]>
# this config file was automatically generated
# using lirc-0.9.0(devinput) on Thu Aug 7 15:10:35 2014
# contributed by
# brand: Test
# model no. of remote control:
# devices being controlled by this remote:
begin remote
name BlackFlatOne
bits 16
eps 30
aeps 100
pre_data_bits 16
pre_data 0x0001
post_data_bits 32
post_data 0x00000001
gap 132799
toggle_bit 0
begin codes
KEY_POWER 0x0c
KEY_MUTE 0x0a
KEY_SELECT 0x38
KEY_Z 0x0f
KEY_1 0x01
KEY_2 0x02
KEY_3 0x03
KEY_4 0x04
KEY_5 0x05
KEY_6 0x06
KEY_7 0x07
KEY_8 0x08
KEY_9 0x09
KEY_0 0x00
KEY_TV 0x1e
KEY_LEFT 0x11
KEY_RIGHT 0x10
KEY_UP 0x20
KEY_DOWN 0x21
KEY_ENTER 0x0d
KEY_CHANNELUP 0x12
KEY_CHANNELDOWN 0x13
KEY_VOLUMEUP 0x2b
KEY_VOLUMEDOWN 0x2c
KEY_STOP 0x0b
KEY_RECORD 0x1f
KEY_CAMERA 0x0e
KEY_ESC 0x29
end codes
end remote
I start lirc manually with
lircd --driver=devinput --device=/dev/input/by-id/usb-TechnoTrend_AG_TT-USB_Infrared_Device-event-ir BlackFlatOne -n
After starting lirc, I start irw, but I get no response at all when pressing buttons on my remote.
I already tried a
cat /dev/input/by-id/usb-TechnoTrend_AG_TT-USB_Infrared_Device-event-ir
(lirc and irw not running, of course) and this gives me cryptic symbols when pressing buttons on my remote, so the IR receiver doesn't seem to be the problem.
I'm wondering if the scancodes in my config are ok for a devinput-device, because the latest "official" lircd.conf.devinput looks like that:
# generated by devinput.sh
begin remote
name devinput
bits 16
eps 30
aeps 100
pre_data_bits 16
pre_data 0x0001
post_data_bits 32
post_data 0x00000001
gap 132799
toggle_bit 0
begin codes
KEY_0 11
KEY_102ND 86
KEY_1 2
KEY_2 3
KEY_3 4
KEY_4 5
KEY_5 6
KEY_6 7
KEY_7 8
KEY_8 9
KEY_9 10
KEY_A 30
KEY_AB 0x196
KEY_ADDRESSBOOK 0x1ad
KEY_AGAIN 129
So I'm wondering about the different lengths of the keycodes (e.g. 0x0d vs 0x1ad -> 2 vs 3 digits).
Can anyone help me out with this issue ?
Am I missing something ?
How do I have to format the scancodes/keycodes the correct way for version 0.9.1 ? -
Remote Object - not able to get the returned value from java method
Hi ,
I am developing one sample flex aplication that connects to the java code and displays the returned value from the
java method in flex client. Here I am able to invoke the java method but not able to collect the returned value.
lastResult is giving null . I am able to see the sysout messages in server console.
I am using flex 3.2 and blazeds server and java 1.5
Here is the code what I have written.
<?xml version="1.0" encoding="utf-8"?><mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundColor="#FFFFFF" initialize="initApp()">
<mx:Script><![CDATA[
import mx.controls.Alert;
import mx.binding.utils.ChangeWatcher;
import mx.rpc.events.ResultEvent;
import mx.messaging.*;
import mx.messaging.channels.*
public function initApp():void {
var cs:ChannelSet = new ChannelSet();
var customChannel:Channel = new AMFChannel("my-amf", "http://localhost:8400/blazeds/messagebroker/amf"); cs.addChannel(customChannel);
remoteObj.channelSet = cs;
public function writeToConsole():void { remoteObj.writeToConsole(
"hello from Flash client");
var returnedVal:String = remoteObj.setName().lastResult; Alert.show(returnedVal);
//[Bindable]
// private var returnedVal:String;
]]>
</mx:Script>
<mx:RemoteObject id="remoteObj" destination="sro" />
<mx:Form width="437" height="281">
<mx:FormItem>
</mx:FormItem>
<mx:Button label="Write To Server Console" click="writeToConsole()"/>
</mx:Form>
</mx:WindowedApplication>
Java code
public
public SimpleRemoteObject(){
super(); }
class SimpleRemoteObject {
public void writeToConsole(String msg) { System.out.println("SimpleRemoteObject.write: " + msg); }
public String setName(){ System.
out.println("Name changed in Java");
return "Name changed in Java";
And I have configured destination in remote-config.xml
<destination id="sro">
<properties>
<source>SimpleRemoteObject</source>
<scope>application</scope>
</properties>
</destination>
Please help me .You are not able to get the returned value because if you see the Remote object help you will realise you have to use result="resultfn()" and fault = "faultfn()"
In this you define what you wish to do.
More importantly in the remote object you need to define which method you wish to call using the method class like this
<mx:RemoteObject id="remoteObj" destination="sro" result="r1" fault="f1" >
<Method name="javaMethodName" result="r2" fault="f2"/>
<mx:RemoteObject>
r2 is the function where you get the result back from java and can use it to send the alert. -
Error while using Remote object
Badri can you please put the code that we are using
The remoting-config.xml code is
<?xml version="1.0" encoding="UTF-8"?>
<service id="remoting-service"
class="flex.messaging.services.RemotingService">
<adapters>
<adapter-definition id="java-object"
class="flex.messaging.services.remoting.adapters.JavaAdapter"
default="true"/>
</adapters>
<default-channels>
<channel ref="my-amf"/>
</default-channels>
<destination id="GISDBChart">
<properties>
<source>com.ge.gis.reports.GISDBChart</source>
<scope>application<scope>
</properties>
</destination>
<destination id="GISDBReport">
<properties>
<source>com.ge.gis.reports.GISDBReport</source>
<scope>application<scope>
</properties>
</destination>
</service>
The service-config.xml code is
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
<services>
<service-include file-path="remoting-config.xml" />
</services>
<security>
<login-command
class="flex.messaging.security.TomcatLoginCommand"
server="Tomcat"/>
<security-constraint id="basic-read-access">
<auth-method>Basic</auth-method>
<roles>
<role>guests</role>
<role>accountants</role>
<role>employees</role>
<role>managers</role>
</roles>
</security-constraint>
</security>
<channels>
<channel-definition id="my-amf"
class="mx.messaging.channels.AMFChannel">
<endpoint url="
http://{server.name}:{server.port}/{context.root}/messagebroker/amf"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<polling-enabled>false</polling-enabled>
</properties>
</channel-definition>
<channel-definition id="my-secure-amf"
class="mx.messaging.channels.SecureAMFChannel">
<endpoint
url="https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure"
class="flex.messaging.endpoints.SecureAMFEndpoint"/>
<properties>
<!--HTTPS requests on some browsers do not work when
pragma "no-cache" are set-->
<add-no-cache-headers>false</add-no-cache-headers>
</properties>
</channel-definition>
<channel-definition id="my-polling-amf"
class="mx.messaging.channels.AMFChannel">
<endpoint url="
http://{server.name}:{server.port}/{context.root}/messagebroker/amfpolling"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<polling-enabled>true</polling-enabled>
<polling-interval-seconds>8</polling-interval-seconds>
</properties>
</channel-definition>
</channels>
<logging>
<target class="flex.messaging.log.ConsoleTarget"
level="Error">
<properties>
<prefix>[Flex] </prefix>
<includeDate>false</includeDate>
<includeTime>false</includeTime>
<includeLevel>false</includeLevel>
<includeCategory>false</includeCategory>
</properties>
<filters>
<pattern>Endpoint.*</pattern>
<pattern>Service.*</pattern>
<pattern>Configuration</pattern>
</filters>
</target>
</logging>
<system>
<redeploy>
<enabled>true</enabled>
<watch-interval>20</watch-interval>
<watch-file>{context.root}/WEB-INF/flex/services-config.xml</watch-file>
<touch-file>{context.root}/WEB-INF/web.xml</touch-file>
</redeploy>
</system>
</services-config>
The Error is
getFaultHandler: [FaultEvent fault=[RPC Fault
faultString="Send failed" faultCode="Client.Error.MessageSend"
faultDetail="Channel.Connect.Failed error
NetConnection.Call.Failed: HTTP: Status 503: url: '
http://alpigedv4275.corporate.ge.com/portal/messagebroker/amf'"
messageId="06F0E133-07D6-FBCE-037C-DD26A718AE9D" type="fault"
bubbles=false cancelable=true eventPhase=2]
Please Guide me with this problem.... Its Urgentttttt -
AppleTV no longer accepts new 3rd party remote
I got a new UVerse remote since the old one went belly-up. I wanted to program the new one with the AppleTV. The AppleTV would not accept input from the remote. I messed with all the remote configs, and deleted one that WAS working for my Harmony remote. It would no longer accept a connection from the Harmony. I wiped the AppleTV back to factory, and it still tells me it cannot get a signal from either the UVerse remote or the Harmony remote.
Whenever I try to program, and click on the "Up" button, the light blinks, and the AppleTV beeps. So, it is clearly getting the signal, even though it says it isn't.
I feel like I am missing something very simple, or one of the most recent updates broke something.I know how you feel. I have (2) apple TVs. I think I upgraded a couple of weeks ago, Ill check my version tonight. But I get loooooooooooooooooooooong pauses when I go to my "artists" section under music. Its like it locks up for a minute or 2. Then finally list all my artist. I have 20,000 tracks, but Im not streaming.
I agree apple dont release an update unless you know theres its perfectly bug-free version. There just too eager in recieving those movie revenues to care anymore it seems.
Jonathan -
Secure Flash Remoting from main.asc not returning a result
Hi, Iv got a problem here that could be Flash Remoting or
Flash Media Server related
I have created an application that uses flash media server
and flash remoting.
For authentication in my app I used Kevin Towes suggested
method "Secure Authentication with Flash Communication Server:
Using Tickets and Flash Remoting MX." His article is here
Download
PDF Here
Now to the problem...
My application has no problem connecting to coldfusion using
flash remoting with the defaultGateway url set to
"https://www.mysite.com" (ie over SSL)
However In main.asc, on the Flash Media Server
When Flash Media server attempts to validate the login by
connecting to CFMX using flash remoting it gets no response when
using a secure gateway url. If I set the default gateway url to
just
http://www.mysite.com it works
great.
Why do I not get any response when using https as my gateway
url from Flash Media Server?
thanksSounds like you need to enable mappings for your remoting
gateway. I'm not sure if it's the same as Flex, but here's what you
might need to do, or something similar...
In c:\cfusion8\wwwroot\WEB-INF\flex\remoting-config.xml (or
wherever CF is installed) look for the <use-mappings> node
and set the value to true. You will need to restart CF -
Flex/Air and Web Services/Remote Objects
If I'm calling a web service operation, either through the
mx:webservice or mx:remoteobject tags, do I need to configure my
Flex or Air project (I'm using the latest Flex Builder IDE) with
the "use remote object access service" when creating the project?
When do I need to configure services-config.xml or
remoting-config.xml?
Can't I simply call a web service operation by specifying the
endpoint (if using mx:remoteobject) or the wsdl location for the
service and then invoking one of its methods? I'm having a very
difficult time consuming a web service through either method (even
on my own local ColdFusion 8 developer instance) and need some
assistance. I've looked all over the internet for help, but, so
far, without success.
Thanks,
-JoseYou do not need to specify any server to use any of the RPC
protocols.
Have you looked at an example?
You have not said what problems you are having.
Be aware of crossdomain security issues.
Tracy -
Clarification on services-config.xml files for RemoteObject services
I am currently preparing an AMFPHP environment for exchanging
data with Flex and AIR applications. I can connect to the services
via Netconnection, but using RemoteObject won't work.
Documentation for the necessary configuration files
(services-config.xml, remoting-config.xml and the like) is, um,
sparse and seems to be slightly incorrect or misleading at times.
So I'm looking for clarification about
changes in the syntax of services-config.xml · in
examples for Flex 2.01, there are "class" attributes with values
beginning with "flex.", in Flex 3 examples the attribute name has
changed to "type", values beginning with "flex." have mostly
vanished and been replaced with similar looking values beginning
with "mx.". Are "flex." and "mx." prefixes interchangable?
correct syntax for linking other files into
services-config.xml · the livedocs state that Adobe
prefers linking files into services-config.xml (using something
like <service-include file-path="remoting-config.xml"/>)
instead of defining all service parameters there. But in the
example from the Flex 2.01 livedocs, the root element of the
service-config.xml file is <services> instead of
<services-config>. Assuming that <services> is meant as
a
child of the <services-config> root element, there
seems to be a mandatory <service> child element missing.
That's either intended, illogical, and misleading, or simply
erroneous.
which classes are still valid in Flex 3, which have changed?
· Most of the examples for using RemoteObjects out there are
for FlexBuilder 2 (e.g.
here)
and don't seem to work with FlexBuilder 3 Beta 2. But there is no
statement to be found in the Flex 3 documentation about what has
changed.
a meaningful example for services-config.xml · In the
Flex 3 Beta 2 documentation here are plenty of references to using
services-config.xml, as I can find even information about the
ServerConfig class in the ActionScript 3 Language Reference, a sort
of wrapper class for the information provided in
service-config.xml, but there is no information about what
constitutes a
working service-config.xml configuration (which XML tags of
what names containing what attributes need to be present).
As I'd really like to create cutting-edge Flex and AIR OCC
applications, I'm eager to have those ambiguities clarified.
Best regards,
CathnessFrom the docs it looks like this is used for web services as
well:
http://livedocs.adobe.com/flex/201/html/dataservices_config_100_3.html#260186
If this isn't the right config file, which file should I be
looking at?
Mike -
Retrieving the remote IP when using Flex Remoting over RTMP
Hello,
I am trying to retrieve the IP address of a user making a Java call to my service defined in remoting-config.xml
If i setup an AMF channel I can use the folllowing to retrieve the remote IP address:
String ip = FlexContext.getHttpRequest().getRemoteAddr();
But when i try to do the same over a RTMP channel I get a Java exception because the object that RTMP uses to fake a httprequest doesn't implement that function.
How do i retrieve the IP of the user making the call in this case? It has to be somewhere or the server wouldn't be able to send a reply to the client, but i haven't been able to find it.
Constantijn VisinescuI tried all of your ideas and still no luck (see below). One thing I forgot to mention was that when using Internet Exploier to view the web page on another computer I can see the document title (AKA- VI name) and the header I typed in. But where the vi should be I have the missing picture Icon (the one you see when a web page has a bad link to an image). Image will show up on sever computer when I click preview web page. Is there anything that the receiving computer needs to have other than the run time code?
TST – I have found that the start web sever button will gray out if you goto tools options web server configuration then manual check the enable web server check box. So that wasn’t it.
Soroush- I set up computer to be a server using control panel (I didn’t know you could do that) thank for the ini file I will update mine
Thoskins- I change port number and the still didn’t work
HTML code created using Labview web publishing code (everything looked go to me???)
var obj = '<OBJECT ID="LabVIEWControl" CLASSID="CLSID:A40B0AD4-B50E-4E58-8A1D-8544233807AC" WIDTH=1019 HEIGHT=716 CODEBASE="ftp://ftp.ni.com/support/labview/runtime/windows/7.1';
if (lng.indexOf("fr") != -1) { obj = obj + '/French'; }
else if (lng.indexOf("de") != -1) { obj = obj + '/German'; }
else if (lng.indexOf("ja") != -1) { obj = obj + '/Japanese'; }
obj = obj + '/LVRunTimeEng.exe">';
document.write(obj);
// --></SCRIPT>
<PARAM name="LVFPPVINAME" value="390Troubleshoot.vi">
<PARAM name="REQCTRL" value=false>
<EMBED SRC=".LV_FrontPanelProtocol.rpvi71" LVFPPVINAME="390Troubleshoot.vi" REQCTRL=false TYPE="application/x-labviewrpvi71" WIDTH=1019 HEIGHT=716 PLUGINSPAGE="http://digital.ni.com/express.nsf/express?openagent&code=ex3e33&"></EMBED>
</OBJECT>
</TD></TR></TABLE>
</HTML>
Maybe you are looking for
-
Trying to display the modified history in a Sharepoint Library
Hello, new to sharepoint. Ive created a SharePoint library in which documents are checked in and out. In the columns Ive added the Modified By view. Id like that view to show all users and dates the file was modified. Not just the last user. Is this
-
Mail.app - Delete all messages in mailboxes
I have a POP account whose mailboxes show up under ON MY MAC in Mail.app. Say, I have the following mailbox and its submailboxes: Mailbox1 submailbox1 (containing 50 messages) submailbox2 (containing 20 messages) submailbox100 (containing 34 me
-
I have an iMac that I purchased back in 2010 and over the past 9 month or less my computer just started shutting down while someone was in the process or working on it. What could this come from? Is there a simple solutions to this problem?
-
Title explains. Also, I tried disconnecting it and then reconnecting it, but no luck. I am writing to you on my iPod touch(5th gen ) so as you can see it has Internet access.
-
Bit-depth of RAW/DNG files in Lightoom 5
According to the Canon website (Canon U.S.A. : Support & Drivers : EOS 5D Mark II), my EOS 5D Mark II produces a 14-bit RAW file, yet when I bring it into LR5 (as a .dng), the exposure slider goes only from -5 to +5 (10 stops); why doesn't it go from