Remote Enabled Module option for FI_ITEMS_DISPLAY

Hi,
We need to Enable the Remote Enable option for function module
FI_ITEMS_DISPLAY to access the third party system.
Please suggest wheather we can enable the remote enable option but in
this function module refernce parameters are used.
please suggest.

Hi,
purpose of this FM is to display ALV with some data which are passed to this function module and therefore it is meaningless to make this FM remote enabled. It is not clear what exactly is your issue. Can You explain it in more detail?
If you want to get items data from third party system and than to display them in SAP, you do not need to change this FM to remote enabled. You just need to get data from external system before calling this FM for displaying data and pass these data to FM FI_ITEMS_DISPLAY.
If you want do display ALV in third party system, it is not possible.
In general, it is possible to make a customer function module which will be remote enabled and will be used as a "wrapper" and call this FM instead of the original one.
Regards,
Adrian

Similar Messages

Remote enable module - exceptions issue

Hello all,
I have a function module.
I choosed to make it RFC : Remote enable module.
Then I got the message During RFC/update, no exception classes can be used, when I try to check it.
So I commented all parts regarding exceptions, deleted the Exceptions part .
And I still receive the same message
I don't know what else to do... Does anybody has an advice ?
Thank you !!!

Hello Ariana
Most likely there is an exception class defined in the signature of your function module.
Remove the exception class and replace it with a standard exception and then the compilation error should disappear.
However, RFC-enabled fm's should not raise any exception because otherwise the RFC connection will dump. Instead, return the errors as messages in a RETURN parameter (of table type BAPIRETTAB) like it is done in BAPIs.
Regards
Uwe

Remote-Enabled BAPI/RFC for creating "Request Special Payment (SPSP)"

Is there any Remote-Enabled BAPI/RFC for creating "Request Special Payment (SPSP)" which is one of the Personnel Change Requests under MSS ?
Thanks.

closing to post another question.

Connector name inside Remote enabled module

Hi
I have a remote enabled function module which can be called from any system.
But the problem is that I need to have to connector name inside the FM code through which the call has made.
Is it possible?
For eg. We may call the FM from a system like
CALL 'MY_REMOTE_MODULE'
DESTINATION 'connector_name'
EXPORTING
IMPORTING
Can I have the name of the connector(connector_name in above code) inside the FM code without explicitly passing it in exporting parameter?
Thanks
Ankur

Not sure if there is another way next to passing it as an additional parameter. Why is this simple solution not an option for you?
Thomas

Regarding to enable transfered option for enhanced field in BI 7.0

Hi Experts,
I am working on a requirement for which i have enhanced fields at RSA 6 extractor level and then I removed hide options from those enhanced fields and then I had replicate it at BI system but then what happen na for those fields that i have enhance transfered option at DataSource level in BI side is not enable.Even at Bi level edit button at DataSource level is disabled.So I cannot even edit it.Iam using Emulated DataSource ( 3.5 DataSource ) in BI 7.0.The DataSource is available in activate version.Can any body suggest any thing how to enable transfered option in BI 7.0 when it is disabled.
Thanks & Regards
Vinod kumar

Hi
Check if you have Authorization to Replicate/Change / Active for the DS, BASIS Team can help you with this.
R/3 side
Recheck for your enhanced / Appended fields at R/3 Side .
Make sure that you have saved/Activated the Code/DS/Structure.
RSA6 -- Check your DS for the enhanced Fields again / Transport the Same again.
BI Side
RSA13--Source System --Say Replicate DS -- Now see if you can access the enhanced fields here.
As you said you are using emulated DS -- Check if your Transfer/Update Rules are Active for the DS.. Try to activate the same with RS_TRANSTRU_ACTIVATE_ALL / RSDS_DATASOURCE_ACTIVATE_ALL/ RSDS_UPDR_REACTIVATE_ALL...
Hope it helps and clear

Enable print option for transaction IW33

Hi,
Is there any way by which we can make the print option enabled in the transaction IW33 screen?.
It is currently greyed out and the requirement is to enable this option so that the user can take print outs from transaction IW33.
This option is enabled in transaction IW32. The program name for both these transactions is same but the GUI statuses are different.
Please suggest if we can achieve this functionality.
Regards,
Ravindra

Hi Ravindra,
I understand that, it is easier to give the authorization to IW32 than to fix the print issue from IW33. that i think is good solution for your issue.
Thanks,
Srini.

How to enable Audit option for "Evaluation Context"

Hi Everyone,
I am looking for audit option to enable - EVALUATION CONTEXT
for below statements. I am in Oracle 9.2.0.4
ALTER ANY EVALUATION CONTEXT
CREATE EVALUATION CONTEXT
CREATE ANY EVALUATION CONTEXT
DROP ANY EVALUATION CONTEXT
EXECUTE ANY EVALUATION CONTEXT
But it is showing up error mesg.
SQL> audit on EVALUATION CONTEXT by access;
audit on EVALUATION CONTEXT by access
ERROR at line 1:
ORA-00956: missing or invalid auditing option
SQL>audit EVALUATION CONTEXT by access;
audit EVALUATION CONTEXT by access
ERROR at line 1:
ORA-00956: missing or invalid auditing option
SQL> audit create EVALUATION CONTEXT by access;
audit create EVALUATION CONTEXT by access
ERROR at line 1:
ORA-00969: missing ON keyword
SQL> audit on create EVALUATION CONTEXT by access;
audit on create EVALUATION CONTEXT by access
ERROR at line 1:
ORA-00956: missing or invalid auditing option
Thanks in advance.
R Ram
Edited by: user11985525 on Apr 14, 2010 1:42 PM

Hi Ghanny,
Afaik, there is no auditing capability in OIF for the SAML 2.0 part. And even the "Enable Auditing" parameter for SAML 1.x that you mentioned would only record the assertions created and not the actual resource accessed. If you have a web security product stack (such as OAM) at the SP, that would typically have auditing capabilities.
-Vinod

Read revision Level of material with remote enabled module

Hi all,
I want to know, if it's possible to read the latest revision level or the revision level of a specific date of an material via a function module wich is remote call enabled?
I have found the function modul:
REVISION_LEVEL_SELECT
this does exactly what i need, but it is not enabled for a remote call. Is there any other function modul I can call remotely to get the revision level?
Thanks for any help
best regards
Matthias Brück.

yes, thats right and exactly my problem. I have testet this internal FM via transaction se37 and got exactly what I need.
So, I'm looking for an FM wich I can invoke remotely and returns the Revision Level of the material.
But, thanks for your hint!

Disable Delete option but enable edit option for a content item?

Hi,
Appreciate your input on this. The portal version being used here is 3.0.9.8.2.
I would like to have the following privileges setup for a content folder's items.
- one group can edit and delete items
- one group can edit but not delete items.
However looking at the access types available at the folder level - there are only "view only" , "edit style", "manage items", "own folder","create with approval".
The "manage" privilege is simply a catch all privilege. User can edit, checkin/out and also delete an item.
How do I prevent a user/group from deleting an item ? (or atleast disable the rendering of the 'X' delete icon?)
I did experiment with the audit option by enabling version control which is somewhat helpful in that I can preserve the older versions, but like above, I cannot enforce that.
regards
-Ananth

thanks for your answer Mr. Atkinson, that was excatly what I need. This is my code inside the event receiver:
public override void ListAdded(SPListEventProperties properties)
SPList list = properties.List;
list.AllowDeletion = false;
list.Update();
but the above code dont have any effect on the list, I have still the Item with DELETE THIS LIST in the listsettings.
do you know maybe why? or can I also debugg it?
thanks in advance
BR
Ahmad
SP 2013 & SPD 2013 & VS 2013 & MSSQL 2012

Doubt in remote enabled module

hi all
i am creating a fn. module (rfc).when i activate the fn. module it shows an error (report/program statement missing or program type is include). my fn group is inactive how to active that ... is the problem is because of fn group....please help in this regard
thanks
lokesh

hi
you are function group is inactive..
1. se37-put in your function module- click change.
2. click on function module- check - extenden program check.
It will display 2 fatal exceptions. These exceptions are the 2 include files of the function group.
one is the include file with all the collections of function modules. (this has further include file)
The other one is the top file with all global data declarations. (this has further include file)
3. double click on each of the includes, and in turn double click on the include files inside them. AND ACTIVATE ALL OF THEM ONE BY ONE.
4. the include files below will give a warning- still activate them any way.
then
5. click back till you return to the function module screen.
7. check, save and activate- and the eror is gone.
hope it was helpful..

How to Create a Remotely Enabled Function Module

Hi All,
How to Create a Remotely Enabled Function Module.
I Want to Create a FM Using Sample Data , This for Practice
What Fields can i give in the Import and Export Parameters.
Please Give me one Example
Can Any one Give me the Steps to do this.
Regards
Vamsi

Hi Vamsi,
Lets do simple example where you will first create a RFC in one server (say A) and create normal program in othere server (say B). Finally you will call the RFC in A from B.
Do the following steps for creating RFC in server A.
1. log on to server A
2. go to se37
3. Edit -> function groups-> create function group and give the function group name (say ZGRP).
4. create a FM ( say Z_TEST_RFC) in se37 providing the function group which is created just now.
5. go to attribute tab -> choose remote-enabled module from processing type.
so that your FM will become RFC.
6. provide the import parameter in import tab.
we will provide only two import parameters.
- parameter name : P_NUM1, typing: TYPE, associated type : I & check the pass value (all the parameters of RFC must pass by value).
- parameter name : P_NUM2, typing: TYPE, associated type : I & check the pass value
7. provide the export parameter in export tab.
parameter name : P_SUM, typing: TYPE, associated type : I & check the pass value
8. write the given simple code in source code tab.
FUNCTION Z_TEST_RFC.
P_TOT = P_NUM1 + P_NUM2.
ENDFUNCTION.
Do the following steps for creating ABAP program which will call the RFC in server B.
1. se38 - > creat a program.
2. write the given simple code.
data tot type i.
call function 'Z_TEST_RFC' destination 'XXXXXX'
exporting
 p_num1 = 10
 p_num2 = 15
importing
 p_tot = tot.
write tot.
please note that XXXXXX is RFC connection which is avialable in sm59 transaction in server A.
-go to sm59 - > abap connection (list of RFC connection configurations are avialable). choose server B connection and replace it of XXXXXX in the code.
finally you can execute the normal abap program that will call the RFC and display the result.
Regards,
Sukhee

Can we call Remote Endable Module from another Remote Enabled Moduel

Hii experts...
I have a problem regarding Remote Enabled Module Function Module....
Actually i want to call the standard BAPI 'BAPI_GL_GETGLACCBALANCE' into the BAPI which i hve created...
is it possible???
or can anyone tell me if it is not possible then what is the alternative for this..???

'Remote enabled' means that you can also call the function remotely. The 'Remote enabled' characterstic implies some restrictions for the FMs interface, i.e. parameters can not be passed by reference because the remote system has no access to the memory of the called systems where the referenced data are located.
Remote call means only a restriction for the remote call, not for any direct call.
Regards,
Clemens

What is the exact syntax for calling remote function module.

Hi to all
1.....what is the exact syntax for calling remote function module.?
Thanks and regards,
k.swaminath reddy

hi
good
Lets do simple example where you will first create a RFC in one server (say A) and create normal program in othere server (say B). Finally you will call the RFC in A from B.
Do the following steps for creating RFC in server A.
1. log on to server A
2. go to se37
3. Edit -> function groups-> create function group and give the function group name (say ZGRP).
4. create a FM ( say Z_TEST_RFC) in se37 providing the function group which is created just now.
5. go to attribute tab -> choose remote-enabled module from processing type.
so that your FM will become RFC.
6. provide the import parameter in import tab.
we will provide only two import parameters.
- parameter name : P_NUM1, typing: TYPE, associated type : I & check the pass value (all the parameters of RFC must pass by value).
- parameter name : P_NUM2, typing: TYPE, associated type : I & check the pass value
7. provide the export parameter in export tab.
parameter name : P_SUM, typing: TYPE, associated type : I & check the pass value
8. write the given simple code in source code tab.
FUNCTION Z_TEST_RFC.
P_TOT = P_NUM1 + P_NUM2.
ENDFUNCTION.
Do the following steps for creating ABAP program which will call the RFC in server B.
1. se38 - > creat a program.
2. write the given simple code.
data tot type i.
call function 'Z_TEST_RFC' destination 'XXXXXX'
exporting
p_num1 = 10
p_num2 = 15
importing
p_tot = tot.
write tot.
please note that XXXXXX is RFC connection which is avialable in sm59 transaction in server A.
-go to sm59 - > abap connection (list of RFC connection configurations are avialable). choose server B connection and replace it of XXXXXX in the code.
finally you can execute the normal abap program that will call the RFC and display the result.
reward point if helpful.
thanks
mrutyun^

Remote-Enabled Method (wrt ABAP Objects)

Hi All,
Adhering to ABAP Objects, in my project, i am creating instance methods or static methods instead of Function modules.
now i have a requirement, where some functionality needs to be invoked on another server using an RFC destination.
if i create a function module,
1)i can tick the radio button "Remote-Enabled Module" under the Attributes of function module and
2)i can invoke it as
CALL FUNCTION 'ZMY_FM' DESTINATION 'RFCDESTNAME'
EXPORTING
IMPORTING
in such cases is it mandatorily required to create an FM like above, or can i avoid it by writing an equivalent instance method or static method
if we replace the FM with a method, then
1)how can i make the method rfc enabled, and
2)what is the syntax of providing the rfc destination name while invoking method.
Is there any other concept provided in ABAP Objects, that is recommended instead of "Remote-Enabled Function Modules"
thanks in advance,
Madhu_1980

Hello Madhu
If you look at the properties of any global class you will find that the DropDown list for "Category" contains item:
30 = Proxy Class for Remote Interface
For me this sounds like that there might be something in the pipeline of SAP to provide RFC-enabled methods. However, if and when this becomes true is probably unknown.
Regards
Uwe

REMOTE FUNCTION MODULES

hi all,
i want to know how to create remote function modules. how to give the import and export parameters. i want the link of how to create the function modules.
bye
suresh

Hi Suresh,
Goto transaction
SM37 -> Create your function module as Z_FUNCTION.
Assign a function group ( if function group is not there then create a function group as SE37 -> GOTO -> Function Group -> Create Function Group)
On attribute tab, you will see three radio buttons.
Select 'Remote enabled module'
Select :Import tab.
Enter i_MATNR
Type MATNR
Select : Export tab
Enter : e_mara
TYPE MARA
Select : Source Code
Enter :
SELECT SINGLE * FROM MARA INTO e_mara FOR MATNR = i_MATNR.
Save your module.
Activate it.
Test using F8.
You can call this function in your program as
CALL FUNCTION 'Z_FUNCTION' DESTINATION destination_name.
Hope this will help.
Please award few points if it resolves your issue.
Thanks and Warm Regards.
Pras Durafe

Remote Enabled Module option for FI_ITEMS_DISPLAY

Similar Messages

Maybe you are looking for