Remove/deactivate enhancement components from enhancement project

Hi all,
I have created project for enhancement & included the enhancement in the project. Enhancement contains 3 components for example
1. Exit_XXX_001
2. Exit_XXX_002
3. Exit_XXX_003
I have implemented all the three components to check which one suits best for my requirement and found that 001 suits my requirement best. Now there is check mark for all the three components indicating that they are implemented.
My requirement is to make the components 002 & 003 look as if they are not implemented(remove the check mark as it looks before implementation), In other words i want to remove components 002 & 003 from the project.
Hope I'm able to explain what i mean. If anybody require more clarification. Please let me know.
Thanks in advance.

What you're trying to do is not possible. All components contained in an enhancement (SMOD) can only be activated or deactivated en-block. So similarly in CMOD, best you could do is deactivate and remove the complete component...
Cheers, harald

Similar Messages

  • How to remove the time slider from my project and keep only buttons

    How to remove the time slider from my project and keep only buttons to interact with my project .

    If I understand you correctly, go to the skin editor (Project, Skin Editor in Captivate 4), select the Playback Control tab, uncheck the Progressbar check box.  Leave checked the buttons for play/pause, rewind, forward, back, etc.
    I hope this helps.
    Mister C.

  • ADF Faces & BC: Remove unwanted 'model' dir from viewcontroller project

    Hi all,
    I would like to know how to remove the 'model' directory from our ViewController project.
    Steps to see this config:
    1. right click on your "ViewController" project from the application navigator pane
    2. Select 'Project Content'
    3. Select 'Modelers'
    You can see that there is a default 'model' directory under your ViewController directory. When I try to remove it then save, I get "Error parsing the path: The ContentSet is empty" message.
    Does anyone have any ideas on how to remove this value?
    Thanks,
    Wes

    /bump

  • How do I remove Yamaha grand piano from my projects folder?

    Every time I save or load this project, the system uses a lot of time on loading Yamaha Grand Piano to/from the projects folder. I dont use this EXS24 instrument anymore and want to delete it.
    I´m currently looking at it in the Projects manager where I have located the songs project folder. But I dont see a natural way to delete it, and I´m afraid of wiping it off the total harddrive.
    I just want it out of my project.
    How can I manage to do this? It aint in use but still in my project.

    Thanks for trying to help me out, but there aint such an instrument in the in any of the mixer stripes, so the problem is still the same.
    I have 2 other EXS24 instuments previously used in the same project, that keeps on loading, allthough I don´t use them anymore.
    Will try a project scan in the project manager and see if that helps, as I SavedAs the project to a new location. Maybe an existing (but old) version of the project uses that instrument, and thats why it loads when I open my newest version of the project?
    Also; is there a way in the Project Manager that I can remove i.e. an EXS24 instrument from the resources for the project, without deleting the samples themselves?
    Any help appreciated.

  • I want to remove all the components from particular panel.

    hi all,
    i have 3 panels p,p1,p2.i added panels p1 and p2 to a window,then i added a panel p(this panel contaning JScrollPane) to a panel p1.i have a button on panel p2,if i press that button i want to remove all the components as well ass JScrollPane(remember JScrollPane in panel p).
    if possible give example.
    Thanks in advance
    bhaskar
    code is here
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import java.util.*;
    public class test1 extends Window implements ActionListener
    JPanel p,p1,p2;
    JScrollPane jp;
    Button b,b1,b2,b3,b4,b5,b6,b7,b8,b9,b10,b11,b12;
    test1()
    super(new Frame("testing"));
    p=new JPanel();
    p1=new JPanel();
    p2=new JPanel();
    adding();
    jp=new JScrollPane(p);
    jp.setPreferredSize(new Dimension(300,300));
    add(jp);
    setSize(new Dimension(200,200));
    setVisible(true);
    public void adding()
    b12=new Button("hai");
    b12.addActionListener(this);
    p2.add(b12);
    add(p1,BorderLayout.CENTER);
    add(p2,BorderLayout.WEST);
    p.setLayout(new GridLayout(11,1));
    p.setBackground(Color.white);
    b=new Button("one");
    b1=new Button("two");
    b2=new Button("three");
    b3=new Button("4");
    b4=new Button("5");
    b5=new Button("6");
    b6=new Button("7");
    b7=new Button("8");
    b8=new Button("9");
    b9=new Button("10");
    b10=new Button("11");
    b11=new Button("12");
    p.add(b);
    p.add(b1);
    p.add(b2);
    p.add(b3);
    p.add(b4);
    p.add(b5);
    p.add(b6);
    p.add(b7);
    p.add(b8);
    p.add(b9);
    p.add(b10);
    p.add(b11);
    p1.add(p);
    public void actionPerformed(ActionEvent e)
    if(e.getSource()==b12)
    System.out.println(e.getSource());
    System.out.println("111");
    p.removeAll();
    public static void main(String args[])
    test1 t=new test1();
    /*****************************************/

    p.removeAll();

  • Remove deleted software components from Integration directory

    Hi,
    I have several software components and products which have been removed from the SLD.
    But I still can see them on the left tree in the integration directory. How can I remove them
    from the tree?
    Thank you!
    Reward points guaranteed

    Hi Michael Schmidt,
    At first delete all the namespaces and imported objects under it :
    1.Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, and Interface Mappings. If there are any errors during activation, try activating the Objects in the manner specified as specified below
    Integration Scenarios
    Actions
    Integration Processes
    Interface Mapping
    Message Mappings
    Message Interfaces
    Message Types
    Data Types
    2.There should be no Imported SAP Objects in the Software Component. If any delete them and activate changes.
    3.Delete all namespaces in the editor using sign. Do not save the changes.
    4.Delete the two default data types that are created in the Interface Objects-->Data Types of the software component version (ExchangeFaultdata, ExchangeLogdata). Now save changes for the s/w component version and activate the changes. Ignore the warnings that pop-up. Your change list should look like the below.
    Then u delete software component by:
    Double Click on Software Component, On Right Hand side >Go to Software Component Version>Delete the software component.
    U can also refer following link:
    /people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
    Regards,
    Vinod.

  • Removing Boot Camp Components from Windows 7

    Hi. I just got an Apple Keyboard with Numberpad. To make it fully work on my PC with Windows 7, I had to install Boot camp (I used my copy of OS X Snow Leopard). Once boot camp was installed, the media keys and volume keys started working perfectly as they would on a Mac, and the volume HUD also started displaying when I change the volume (looks good). But Boot camp also installed a bunch of other stuff, including drivers that I do not need, like iSight driver, bliuetooth, etc. It also replaced some of my own drivers, but that's not an issue yet. The question is, how can I remove boot camp assistant and its components that are useless to me? What to remove, and what not to remove? I just want full functionality of the keyboard, as I have it right now...
    Thanks in advance.

    Try restore to earlier would undo everything.
    I'd go ahead and uninstall Boot Camp for sure.
    Then Device Manager
    You don't want Apple serivces and startup items - though Apple TimeServices checks the clock on every boot up.
    MSCONFIG to disable any startupitem and services being loaded. But there should / might be one for keyboard.
    From your OS X DVD, copy the contents to a folder on Windows and then look for kbmgr and move (copy and paste) to a new folder.  You don't need any of the other things for motherboard, network, etc that you can rollback or uninstall in Device Manager.
    Pick up Paragon Hard Drive Manager 2011 for an easy disk to disk OS clone for backup - you can boot from either hard drive w/o problem, just change the cable or the BIOS boot device.
    Hard Disk Manager Suite 2011
    I'm surprised that if Apple sells their keybaord for PCs that they don't include just a device driver, or that Windows didn't pick up on what to install automatically.

  • Deleting a topic from within Project Manager = failure

    I searched for this topic here and in RH7's help and didn't
    see anything, so I ask:
    What could prevent a topic from deleting from the Project
    Manager?
    There's a topic I want to delete. The ever-ugly RH help says
    only: "Use the Project Manager pod to remove topics and files from
    your project." Awesome.
    When I right-click on a topic and select delete, I'm prompted
    by a dialog box to acknowledge that the file will be removed from
    my HD. Alright, do it. It then asks me to check it out from version
    control. I do, and that's the end of it. The topic remains and it's
    checked out, but I cannot delete it. Repeated attempts to delete it
    either ask me to check it out again or there are no prompts at all
    after the aforementioned "removed from disk" dialog.
    I've tried closing and re-opening the project and closing and
    re-starting RH7 and this problem was extant before and after the
    7.01 update.

    I am having a similar problem. Check your profile in
    RoboSourceControl. To delete a topic, you have to have the ability
    to Hide and Unhide, as well as Delete.
    If this works, please post back, because we are getting some
    uneven results here. Some of us can delete and some can't. It does
    seem to be an issue with the profile you are using in source
    control, though.
    Elisa

  • Remove screen exit from enhancement project

    Hello Experts,
    I am using using the EXIT: EXIT_SAPMM06E_012 of project MM06E005.
    While activating the project in CMOD, by default screen exits associated will also get activated.
    Please let me know, how to remove only screen exits from project.

    Hi ,
    Just remove the fields in the screen and then deactivate the calling include.What is the business requirement.
    Regards,
    Madhu.
    Edited by: madhurao123 on Jan 3, 2012 3:56 PM

  • Removing pligin components from JCAPS5.1.0?

    Hi,
    We are using JCAPS5.1.0 and we have set up repositry ,in which we
    have installed some of the components like LDAP eWAY,Swift OTD
    Library,Weblogic eWay,but we are not using those components in
    our project,hence we need to remove this plugins from
    repositry.But we are not able to find any way to remove those
    components,
    If anyone have removed/uninstalled the plugins components from
    repositry please let us know how to do the same...
    Thanks.
    Renga.S.

    This might defeat the purpose a bit of removing all the components, but you could try justa dding an empty panel to the JSplitPane, so when you remove you previous Components try
    splitPane.removeComponent(bottomPanel);
    splitPane.setBottomComponent(new JPanel());This should get around the resizing but kinda defeats the purpose!

  • Remove Components from Library

    I'm new to Catalyst, so this might be a stupid question.
    I created a bad datalist and as soon as I realized my error I deleted it from the Artboard, but it is still in my Library. Now every time I run the project I get an alert that says that DataList1 is missing a required part and will produce an error.
    I don't need DataList1 and I'm not really interested in fixing it. In the current build of the application, is there a way to just remove this component from my library so that I don't have to deal with the error anymore?
    Thanks.

    Currently you cannot remove components from the library panel, but this is something we are working on. There is a temporary solution though: switch to code view and you'll see a panel on the right side of the screen that shows all the files in your project. In the components folder there should be a DataList1.mxml file. Right click on it and choose delete.
    Note that if you follow the above steps and delete a component that is used elsewhere in your project, your application won't compile.

  • How do you remove STATEFUL components from memory in EAServer?

    This is from one of the books on Powerbuilder/EAServer:
    "So the major difference between stateless and stateful components is that stateless components
    automatically invoke the component deactivate event when a method call ends and the component
    is logically removed from memory. A stateful component remains in memory until physically re-
    moved by the caller."
    What does the caller (client Powerbuilder program) do to physically remove a stateful component from EAServer?
    Thanks,
    Mark

    Hi Mark
    Not sure...
    Do you know the component is in memory because memory hasn't been released?
    In which case you could check that the destroy event happens and use it to explicitly clean up.  This should really be in the deactivate event in case you do start pooling.
    From memory, (pardon the pun) there were memory leaks in EAServer version 10 years ago. A very small part of a component could take up lost space, eventually leaving only smaller and smaller chunks free, ultimately causing decline in performance and failure.
    Do you know the component is in memory because Jag Manager tells you after you have refreshed to folder?
    Lars

  • Replication of Enhanced Products from CRM to R/3

    Hi,
      I have downloaded the R/3 Material from R/3 to CRM.
    Now I have made changes in that product in CRM i.e I have added some attributes in CRM Product Master.
    Now,Is it possible to replicate that enhanced product from CRM back to R/3.
    If yes,Can you please explain me as to how I do it in Middleware???
    Very Urgent
    Regards
    Puneet

    Hi,
    CRM to R/3 replication is not possible for products but only for IBASES. you will have to enhance the material master in ECC and then replicate the custom data to CRM in enhanced fields. that is possible but from CRM to ECC i am afraid is not !
    Thanks
    Sudhir Grover

  • [svn:fx-trunk] 12883: Remove the skin classes from the halo theme project to avoid redundancy with the airframework /framework swcs.

    Revision: 12883
    Revision: 12883
    Author:   [email protected]
    Date:     2009-12-12 15:53:50 -0800 (Sat, 12 Dec 2009)
    Log Message:
    Remove the skin classes from the halo theme project to avoid redundancy with the airframework/framework swcs.
    QE notes: No
    Doc notes: No
    Bugs: SDK-24293
    Reviewer: Glenn
    Tests run: Checkintests, smattering of Halo and AIR mustella tests
    Is noteworthy for integration: Yes
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24293
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/FrameworkClasses.as
        flex/sdk/trunk/frameworks/projects/halo/build.xml
    Added Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/WindowBackground.as
    Removed Paths:
        flex/sdk/trunk/frameworks/projects/halo/assets/
        flex/sdk/trunk/frameworks/projects/halo/src/HaloClasses.as
        flex/sdk/trunk/frameworks/projects/halo/src/mx/skins/

  • Why not generating adf bc projects and components from offline database

    I imported offline database objects from my production database that is big. I would like designing some business components without necessarily the database running and be connected.
    Is it a reason why an adf bc project may necessarily connect to an on line database ?
    Why it is not possible to generate adf bc components from off line database objects ?

    The ADF BC design time has always required a database connection, to be able to test the validity of expert-mode SQL statement for one reason, but not the only one. We have not lifted that requirement in the 11g release.
    I filed ER# 6056701 to track your request. Thanks.

Maybe you are looking for