Remove gaps when drawing custom items into column data browser

I am drawing custom controls in a column-view data browser, and find that there are margins on each side the drawing region. This is especially annoying when I need to draw the highlighted background for selected items because then the selection bar has gaps between columns.
The browser has "variable width columns" enabled, and the columns in question have min and max widths set to 50 pixels. The drawing region that I am passed in the callback is 26 pixels wide, meaning there are 12 pixel margins on each side. Anyone know how to get rid of these so that I can make my own decision about margin size and properly fill in the background for selection highlighting? Thanks in advance.
(See sites.google.com/site/polyritmo/gaps-in-column-view for a picture)

Never did get an answer on this one. Does that mean it's not possible to make this work properly?

Similar Messages

How to remove gaps/null values from set of columns in a row

Im trying to implement a solution for removing null value columns from a row.
Basically in below example i have five codes and corresponding id's for that codes.What im trying to achive here is if
i have a null code then i have to move next not null code and id into its new location.
Example:
'A1'cd1,'A2'cd2,null cd3,'A4'cd4,null cd5,'i1'id1,'i2'id2,null id3,'i4' id4,null id5 So here cd4 and id4 should take positions of cd3 and id3.
Output should look like this
cd1 cd2 cd3 cd4 cd5     id1 id2 id3 id4 id5
A1 A2   A4              i1 i2 i4Any help would be highly appreciated for below example:
with temp_table as
(select 'A1'cd1,'A2'cd2,null cd3,'A4'cd4,null cd5,'i1'id1,'i2'id2,null id3,'i4' id4,null id5 from dual union all
select 'A11',null,null,'A44','A55','id11',null,null, 'id44','id55' from dual union all
select null,'A111',null,null,'A555',null,'id111',null, null,'id555' from dual union all
select 'A',null,null,'A1111','E55','id11',null,null, 'id111','id1111' from dual )
select * from temp_table;Edited by: GVR on Dec 1, 2010 8:27 AM

I like case expression B-)
The same question of my homepage http://www.geocities.jp/oraclesqlpuzzle/7-81.html
with temp_table(cd1,cd2,cd3,cd4,cd5,id1,id2,id3,id4,id5) as(
select 'A1' ,'A2' ,null,'A4'   ,null ,'i1' ,'i2'   ,null,'i4'   ,null     from dual union all
select 'A11',null ,null,'A44' ,'A55' ,'id11',null   ,null,'id44' ,'id55'   from dual union all
select null,'A111',null,null   ,'A555',null ,'id111',null,null   ,'id555' from dual union all
select 'A' ,null ,null,'A1111','E55' ,'id11',null   ,null,'id111','id1111' from dual)
select
case when SumCD1 = 1 then CD1
     when SumCD1+SumCD2 = 1 then CD2
     when SumCD1+SumCD2+SumCD3 = 1 then CD3
     when SumCD1+SumCD2+SumCD3+SumCD4 = 1 then CD4
     when SumCD1+SumCD2+SumCD3+SumCD4+SumCD5 = 1 then CD5 end as CD1,
case when SumCD1+SumCD2 = 2 then CD2
     when SumCD1+SumCD2+SumCD3 = 2 then CD3
     when SumCD1+SumCD2+SumCD3+SumCD4 = 2 then CD4
     when SumCD1+SumCD2+SumCD3+SumCD4+SumCD5 = 2 then CD5 end as CD2,
case when SumCD1+SumCD2+SumCD3 = 3 then CD3
     when SumCD1+SumCD2+SumCD3+SumCD4 = 3 then CD4
     when SumCD1+SumCD2+SumCD3+SumCD4+SumCD5 = 3 then CD5 end as CD3,
case when SumCD1+SumCD2+SumCD3+SumCD4 = 4 then CD4
     when SumCD1+SumCD2+SumCD3+SumCD4+SumCD5 = 4 then CD5 end as CD4,
case when SumCD1+SumCD2+SumCD3+SumCD4+SumCD5 = 5 then CD5 end as CD5,
case when SumID1 = 1 then ID1
     when SumID1+SumID2 = 1 then ID2
     when SumID1+SumID2+SumID3 = 1 then ID3
     when SumID1+SumID2+SumID3+SumID4 = 1 then ID4
     when SumID1+SumID2+SumID3+SumID4+SumID5 = 1 then ID5 end as ID1,
case when SumID1+SumID2 = 2 then ID2
     when SumID1+SumID2+SumID3 = 2 then ID3
     when SumID1+SumID2+SumID3+SumID4 = 2 then ID4
     when SumID1+SumID2+SumID3+SumID4+SumID5 = 2 then ID5 end as ID2,
case when SumID1+SumID2+SumID3 = 3 then ID3
     when SumID1+SumID2+SumID3+SumID4 = 3 then ID4
     when SumID1+SumID2+SumID3+SumID4+SumID5 = 3 then ID5 end as ID3,
case when SumID1+SumID2+SumID3+SumID4 = 4 then ID4
     when SumID1+SumID2+SumID3+SumID4+SumID5 = 4 then ID5 end as ID4,
case when SumID1+SumID2+SumID3+SumID4+SumID5 = 5 then ID5 end as ID5
from (select cd1,cd2,cd3,cd4,cd5,id1,id2,id3,id4,id5,
      nvl2(cd1,1,0) as SumCD1,
      nvl2(cd2,1,0) as SumCD2,
      nvl2(cd3,1,0) as SumCD3,
      nvl2(cd4,1,0) as SumCD4,
      nvl2(cd5,1,0) as SumCD5,
      nvl2(id1,1,0) as SumID1,
      nvl2(id2,1,0) as SumID2,
      nvl2(id3,1,0) as SumID3,
      nvl2(id4,1,0) as SumID4,
      nvl2(id5,1,0) as SumID5
      from temp_table)
order by cd1,cd2,cd3,cd4,cd5;
CD1   CD2    CD3   CD4   CD5   ID1    ID2    ID3     ID4   ID5
A     A1111 E55   null null id11   id111 id1111 null null
A1    A2     A4    null null i1     i2     i4      null null
A11   A44    A55   null null id11   id44   id55    null null
A111 A555   null null null id111 id555 null    null nullMy SQL articles of OTN-Japan
http://www.oracle.com/technology/global/jp/pub/jp/ace/sql_image/1/otnj-sql-image1.html
http://www.oracle.com/technology/global/jp/pub/jp/ace/sql_image/2/otnj-sql-image2.html

Add items into column in matrix

Hi everyone,
I have an error like 'reference instance is not set yet' when I debug this code.
Private Sub DrawForm()
        Dim oForm As SAPbouiCOM.Form
        Dim oItem As SAPbouiCOM.Item
        Dim oCombo As SAPbouiCOM.ComboBox
        Dim oColumns As SAPbouiCOM.Columns
        Try
             oForm = SBO_Application.Forms.Item("FBLK")
            ' Add Edit Items
            ' BP Code
            oItem = oForm.Items.Item("txtCode")
            cmbBPCode = oItem.Specific
            AddBPCodeCombo(cmbBPCode)
            ' Add a matrix
            oItem = oForm.Items.Item("mat")
            oMatrix = oItem.Specific
            oColumns = oMatrix.Columns
            ' Item Code
            colItemCode = oColumns.Item("ItemCode")
            colItemName = oColumns.Item("ItemName")
            'Add Valid Values
            AddItemsToCombo(colItemCode)
            oMatrix.AddRow()
        Catch ex As Exception
            MessageBox.Show(ex.Message)
            Exit Sub
        End Try
    End Sub
    Private Sub AddItemsToCombo(ByVal oColumn As SAPbouiCOM.Column)
        Dim RS As SAPbobsCOM.Recordset
        Dim Bob As SAPbobsCOM.SBObob
        Try
            RS = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
            Bob = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoBridge)
            RS = Bob.GetItemList
            RS.MoveFirst()
            While RS.EoF = False
                oColumn.ValidValues.Add(RS.Fields.Item("ItemCode").Value, RS.Fields.Item("ItemName").Value) =============> error happen
                RS.MoveNext()
            End While
        Catch ex As Exception
            MessageBox.Show(ex.Message)
            Exit Sub
        End Try
    End Sub
Is there anyone can help me.Thanks

hi,
oColumn.ValidValues.Add(RS.Fields.Item("ItemCode").Value, RS.Fields.Item("ItemName").Value)
if the error is Validvaue - value exceeds the boundries
combo has Value and Description which is to be shown.
you should know that
RS.Fields.Item("ItemCode").Value.length should not be greater than 50
and
RS.Fields.Item("ItemName").Value.length should not be greater than 50
if any one of the above length is greater than 50 it shows the above discussed error.
if you are not facing with this problem.please specify the error.
regards,
varma

How to remove pages when combining 2 pdfs into a single document?

I renewed my subscription to Acrobat for $89.99 in order to combine 2 pdf documents while removing a page from one. I used to be able to select the pages from a document prior to combining the 2 documents. Now there does not appear to be an option to select pages for combining... What am I missing?

You said in your first message that you subscribed to Acrobat. Our replies were about Acrobat. Indeed, PDF Pack doesn't enable any of those things.

Customer Item Open Interface

Does anyone know what the Lock_flag is for the customer item open interface and what it should be set to when creating customer items? It is a required field but it is not explained in the 11.5.9 documentation.

Hi
I didn't find this flag in TRM of 11.5.10. In what table did you find it?
Regards,
Ricardo Cabral

How to convert data from rows into columns

Hi,
I have a sql table and the data looks like this
GLYEAR GLMN01 GLMN02 GLMN03 GLMN04
2007 -109712.40 6909.15 4758.72 56.88
2007 -13411.32 19132.9 -5585.07 4362.64
Where GLyear reprsents Year and GLMN01 is February, GLMN02 is March and so on,
Now i want my output to be something like this which i want to insert into another table
GLYear GLMonth GLAmount
2007 February -109712.40
2007 March 6909.15
2007 April 56.88
My new table has 3 columns, GLYear,GLMonth,GLAmount.
Can someone please help me with the select statement on how to do this, i can work with the inserts.
Thanks.

I want you to check these form tread they have the same discussion as you. They will definitely solve your problem
http://blog.jontav.com/post/8344518585/convert-rows-to-columns-columns-to-rows-in-sql-server
http://dba.stackexchange.com/questions/19057/convert-rows-to-columns-using-pivot-in-sql-server-when-columns-are-string-data
http://stackoverflow.com/questions/18612326/how-to-convert-multiple-row-data-into-column-data-in-sql-server
I hope this helps you in solving your problem.
Please remember to click “Mark as Answer” on the post that has answered your question as it is very relevant to other community members dealing with same problem in seeking the right answer

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

See below if the search engine setting was changed without your knowledge and you can't change it back.
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

When-custom-item-event

Hello!
I have problem with webutil.pll in runtime.
When i run my form i get the next exception:
"when-custom-item-event trigger raised unhandled exception ORA-06508".
When i moved webutil_core and delimstr to program units the forms run fine.
What can be a problem?
Thanks.

Webutil was compiled in my database schema.
I see that if i move my forms in same directory with webutil.pll and then re-attache the pll - no exception in runtime.
When i can remove pll from this directory and my form contunue to work fine.
Do you have any explanation?
Message was edited by:
Aver

Frm-40735 when-custom-item-event trigger raised unhandled exceptionora06508

frm-40735 when-custom-item-event trigger raised unhandled exception ora-06508.
While logging in, I am getting the above message,
If I click on ok i am able to proceed and do the task.
My problem here is to remove this error.
Any one plz help out?

Welcome to OTN
Before posting on this forum please read
931068 wrote:
frm-40735 when-custom-item-event trigger raised unhandled exception ora-06508.So
ORA-06508:     PL/SQL: could not find program unit being called
Cause:     An attempt was made to call a stored program that could not be found. The program may have been dropped or incompatibly modified, or have compiled with errors.
Action:     Check that all referenced programs, including their package bodies, exist and are compatible. Hope this helps
If someone's response is helpful or correct, please mark it accordingly.

How to bridge (fill) gaps when converting a 2006 geometry into a 2002 geometry

Is it at all possible to bridge (fill) gaps when converting a 2006 geometry into a single 2002 geometry. I have a solution for the conversion from 2006 to 2002 provided by BHall but upon further investigation investigation of my dataset some of the multi line polygons have gaps which I need to fill and I am not sure how to go about this.
Here is a simple example of what I am trying to achieve
Before
SELECT (sdo_geometry(2006, 81989, NULL,
                mdsys.sdo_elem_info_array(1,2,1,5,2,1,9,2,1,13,2,1),
                mdsys.sdo_ordinate_array(16,0.999,16.998,-0.001,17.253,-0.001,18.003,0.999,18.003,0.999,19.001,0.999,19.001,0.999,19.999,-0.001)))
FROM dual
After
SELECT (sdo_geometry(2006, 81989,NULL,
               mdsys.sdo_elem_info_array(1,2,1),
               mdsys.sdo_ordinate_array(16,0.999,17.253,-0.001,18.003,0.999,19.001,0.999,19.999,-0.001))) FROM dual
Thanks in advance

Okay Roché,
You might need to break this problem down into smaller parts for the forum. All your examples show the gap being replaced by a single vertice - e.g. you want to "snap" the gap together. I'd suggest this is just complicating your question. Once the gap is filled (with a line) then you can run SDO_UTIL.REMOVE_DUPLICATE_VERTICES afterwards to remove the new line if its below your tolerance. I think that Bryan's code wrapped in remove duplicate vertices will solve your second scenario. But overall I think it would be helpful to focus just on the filling and leave the snapping for a follow-up question.
So back to scenario #1, below is some code I wrote a while back that might do what you want or at least get you started.     Note that the input must be a multistring and the multistring cannot be "spaghetti". In other words each line in the multistring must be disjoint or at most touch other lines only at endpoints. The goal is to sift through the lines and create a single linestring using the smallest gaps. It's not subtle and will indeed produce bad geometries if the inputs are setup in an impossible manner. There are also some rare geodetic bugs with SDO_GEOM.RELATE that crop up. So you'll note I test both distance and relate in some places. That's intentional though kind of dumb.
Hopefully this helps. If you improve the code please shoot a copy back to me.
Cheers,
Paul
CREATE OR REPLACE PACKAGE dz_gap_fill
AUTHID CURRENT_USER
AS
   FUNCTION linear_gap_filler(
       p_input            IN MDSYS.SDO_GEOMETRY
      ,p_tolerance        IN NUMBER DEFAULT 0.05
   ) RETURN MDSYS.SDO_GEOMETRY;
END dz_gap_fill;
CREATE OR REPLACE PACKAGE BODY dz_gap_fill
AS
   FUNCTION fast_point(
       p_x             IN NUMBER
      ,p_y             IN NUMBER
      ,p_z             IN NUMBER DEFAULT NULL
      ,p_m             IN NUMBER DEFAULT NULL
      ,p_srid          IN NUMBER DEFAULT 8265
   ) RETURN MDSYS.SDO_GEOMETRY
   AS
   BEGIN
      -- Step 10
      -- Check over incoming parameters
      IF p_x IS NULL
      OR p_y IS NULL
      THEN
         RAISE_APPLICATION_ERROR(-20001,'x and y cannot be NULL');
      END IF;
      -- Step 20
      -- Do the simplest solution first
      IF p_z IS NULL
      AND p_m IS NULL
      THEN
         RETURN SDO_GEOMETRY(
             2001
            ,p_srid
            ,SDO_POINT_TYPE(
                 p_x
                ,p_y
                ,NULL
            ,NULL
            ,NULL
      END IF;
      -- Step 30
      -- Do the other wilder choices
      IF p_z IS NULL
      AND p_m IS NOT NULL
      THEN
         RETURN SDO_GEOMETRY(
             3301
            ,p_srid
            ,SDO_POINT_TYPE(
                 p_x
                ,p_y
                ,p_m
            ,NULL
            ,NULL
      ELSIF p_z IS NOT NULL
      AND   p_m IS NULL
      THEN
         RETURN SDO_GEOMETRY(
             3001
            ,p_srid
            ,SDO_POINT_TYPE(
                 p_x
                ,p_y
                ,p_z
            ,NULL
            ,NULL
      ELSIF p_z IS NOT NULL
      AND   p_m IS NOT NULL
      THEN
         RETURN SDO_GEOMETRY(
             4401
            ,p_srid
            ,NULL
            ,SDO_ELEM_INFO_ARRAY(1,1,1)
            ,SDO_ORDINATE_ARRAY(p_x,p_y,p_z,p_m)
      ELSE
         RAISE_APPLICATION_ERROR(-20001,'ERR!');
      END IF;
   END fast_point;
   FUNCTION get_start_point(
      p_input        IN MDSYS.SDO_GEOMETRY
   ) RETURN MDSYS.SDO_GEOMETRY
   AS
      int_dims PLS_INTEGER;
      int_gtyp PLS_INTEGER;
      int_lrs PLS_INTEGER;
   BEGIN
      -- Step 10
      -- Check over incoming parameters
      IF p_input IS NULL
      THEN
         RETURN NULL;
      END IF;
      -- Step 20
      -- Gather information about the geometry
      int_dims := p_input.get_dims();
      int_gtyp := p_input.get_gtype();
      int_lrs := p_input.get_lrs_dim();
      -- Step 30
      -- Handle point and multipoint inputs
      IF int_gtyp = 1
      THEN
         RETURN p_input;
      ELSIF int_gtyp = 5
      THEN
         RETURN SDO_UTIL.EXTRACT(p_input,1);
      END IF;
      -- Step 40
      -- Return results
      IF int_dims = 2
      THEN
         RETURN fast_point(
             p_input.SDO_ORDINATES(1)
            ,p_input.SDO_ORDINATES(2)
            ,NULL
            ,NULL
            ,p_input.SDO_SRID
      ELSIF int_dims = 3
      AND int_lrs = 3
      THEN
         RETURN fast_point(
             p_input.SDO_ORDINATES(1)
            ,p_input.SDO_ORDINATES(2)
            ,NULL
            ,p_input.SDO_ORDINATES(3)
            ,p_input.SDO_SRID
      ELSIF int_dims = 3
      AND int_lrs = 0
      THEN
         RETURN fast_point(
             p_input.SDO_ORDINATES(1)
            ,p_input.SDO_ORDINATES(2)
            ,p_input.SDO_ORDINATES(3)
            ,NULL
            ,p_input.SDO_SRID
      ELSIF int_dims = 4
      AND int_lrs IN (4,0)
      THEN
         RETURN fast_point(
             p_input.SDO_ORDINATES(1)
            ,p_input.SDO_ORDINATES(2)
            ,p_input.SDO_ORDINATES(3)
            ,p_input.SDO_ORDINATES(4)
            ,p_input.SDO_SRID
      ELSIF int_dims = 4
      AND int_lrs = 3
      THEN
         RETURN fast_point(
             p_input.SDO_ORDINATES(1)
            ,p_input.SDO_ORDINATES(2)
            ,p_input.SDO_ORDINATES(4)
            ,p_input.SDO_ORDINATES(3)
            ,p_input.SDO_SRID
      ELSE
         RAISE_APPLICATION_ERROR(-20001,'ERR!');
      END IF;
   END get_start_point;
   FUNCTION get_end_point(
      p_input        IN MDSYS.SDO_GEOMETRY
   ) RETURN MDSYS.SDO_GEOMETRY
   AS
      int_dims PLS_INTEGER;
      int_gtyp PLS_INTEGER;
      int_lrs PLS_INTEGER;
      int_len PLS_INTEGER;
   BEGIN
      -- Step 10
      -- Check over incoming parameters
      IF p_input IS NULL
      THEN
         RETURN NULL;
      END IF;
      -- Step 20
      -- Gather information about the geometry
      int_dims := p_input.get_dims();
      int_gtyp := p_input.get_gtype();
      int_lrs := p_input.get_lrs_dim();
      int_len := p_input.SDO_ORDINATES.COUNT();
      -- Step 30
      -- Handle point and multipoint inputs
      IF int_gtyp = 1
      THEN
         RETURN p_input;
      ELSIF int_gtyp = 5
      THEN
         RETURN SDO_UTIL.EXTRACT(
             p_input
            ,SDO_UTIL.GETNUMELEM(p_input)
      END IF;
      -- Step 40
      -- Return results
      IF int_dims = 2
      THEN
         RETURN fast_point(
             p_input.SDO_ORDINATES(int_len - 1)
            ,p_input.SDO_ORDINATES(int_len)
            ,NULL
            ,NULL
            ,p_input.SDO_SRID
      ELSIF int_dims = 3
      AND int_lrs = 3
      THEN
         RETURN fast_point(
             p_input.SDO_ORDINATES(int_len - 2)
            ,p_input.SDO_ORDINATES(int_len - 1)
            ,NULL
            ,p_input.SDO_ORDINATES(int_len)
            ,p_input.SDO_SRID
      ELSIF int_dims = 3
      AND int_lrs = 0
      THEN
         RETURN fast_point(
             p_input.SDO_ORDINATES(int_len - 2)
            ,p_input.SDO_ORDINATES(int_len - 1)
            ,p_input.SDO_ORDINATES(int_len)
            ,NULL
            ,p_input.SDO_SRID
      ELSIF int_dims = 4
      AND int_lrs IN (4,0)
      THEN
         RETURN fast_point(
             p_input.SDO_ORDINATES(int_len - 3)
            ,p_input.SDO_ORDINATES(int_len - 2)
            ,p_input.SDO_ORDINATES(int_len - 1)
            ,p_input.SDO_ORDINATES(int_len)
            ,p_input.SDO_SRID
      ELSIF int_dims = 4
      AND int_lrs = 3
      THEN
         RETURN fast_point(
             p_input.SDO_ORDINATES(int_len - 3)
            ,p_input.SDO_ORDINATES(int_len - 2)
            ,p_input.SDO_ORDINATES(int_len)
            ,p_input.SDO_ORDINATES(int_len - 1)
            ,p_input.SDO_SRID
      ELSE
         RAISE_APPLICATION_ERROR(-20001,'ERR!');
      END IF;
   END get_end_point;
   FUNCTION is_spaghetti(
       p_input             IN MDSYS.SDO_GEOMETRY
      ,p_tolerance         IN NUMBER DEFAULT 0.05
   ) RETURN VARCHAR2
   AS
      num_tolerance    NUMBER := p_tolerance;
      ary_strings      MDSYS.SDO_GEOMETRY_ARRAY := MDSYS.SDO_GEOMETRY_ARRAY();
      ary_starts       MDSYS.SDO_GEOMETRY_ARRAY := MDSYS.SDO_GEOMETRY_ARRAY();
      ary_ends         MDSYS.SDO_GEOMETRY_ARRAY := MDSYS.SDO_GEOMETRY_ARRAY();
      int_count        PLS_INTEGER;
      ary_start_count MDSYS.SDO_NUMBER_ARRAY := MDSYS.SDO_NUMBER_ARRAY();
      ary_end_count    MDSYS.SDO_NUMBER_ARRAY := MDSYS.SDO_NUMBER_ARRAY();
      ary_inside_count MDSYS.SDO_NUMBER_ARRAY := MDSYS.SDO_NUMBER_ARRAY();
   BEGIN
      -- Step 10
      -- Check over incoming parameters
      IF p_input IS NULL
      THEN
         RETURN NULL;
      ELSIF p_input.get_gtype = 2
      THEN
         RETURN 'FALSE';
      ELSIF p_input.get_gtype <> 6
      THEN
         RAISE_APPLICATION_ERROR(-20001,'input gtype must be 2 or 6');
      END IF;
      IF num_tolerance IS NULL
      THEN
         num_tolerance := 0.05;
      END IF;
      -- Step 20
      -- Break multistring into single linestrings with nodes
      int_count := SDO_UTIL.GETNUMELEM(p_input);
      ary_strings.EXTEND(int_count);
      ary_starts.EXTEND(int_count);
      ary_ends.EXTEND(int_count);
      ary_start_count.EXTEND(int_count);
      ary_end_count.EXTEND(int_count);
      ary_inside_count.EXTEND(int_count);
      FOR i IN 1 .. int_count
      LOOP
         ary_strings(i) := SDO_UTIL.EXTRACT(p_input,i);
         ary_starts(i) := get_start_point(ary_strings(i));
         ary_ends(i)    := get_end_point(ary_strings(i));
      END LOOP;
      -- Step 30
      -- Loop through and count the nodes connections
      FOR i IN 1 .. int_count
      LOOP
         ary_start_count(i) := 0;
         ary_end_count(i)    := 0;
         ary_inside_count(i) := 0;
         FOR j IN 1 .. int_count
         LOOP
            IF i != j
            THEN
               IF SDO_GEOM.RELATE(
                  ary_starts(i),
                  'DETERMINE',
                  ary_strings(j),
                  num_tolerance
               ) IN ('TOUCH','CONTAINS','COVERS','ON')
               THEN
                  ary_start_count(i) := ary_start_count(i) + 1;
               ELSIF SDO_GEOM.RELATE(
                  ary_ends(i),
                  'DETERMINE',
                  ary_strings(j),
                  num_tolerance
               ) IN ('TOUCH','CONTAINS','COVERS','ON')
               THEN
                  ary_end_count(i) := ary_end_count(i) + 1;
               ELSIF SDO_GEOM.RELATE(
                  ary_strings(i),
                  'DETERMINE',
                  ary_strings(j),
                  num_tolerance
               ) IN ('TOUCH','CONTAINS','COVERS','OVERLAPBYINTERSECT')
               THEN
                  ary_inside_count(i) := ary_inside_count(i) + 1;
               END IF;
            END IF;
         END LOOP;
         IF ary_start_count(i) > 1
         OR ary_end_count(i) > 1
         OR ary_inside_count(i) > 0
         THEN
            RETURN 'TRUE';
         END IF;
      END LOOP;
      RETURN 'FALSE';
   END is_spaghetti;
   FUNCTION points2segment(
       p_point_one              IN MDSYS.SDO_POINT_TYPE
      ,p_point_two              IN MDSYS.SDO_POINT_TYPE
      ,p_srid                   IN NUMBER
   ) RETURN MDSYS.SDO_GEOMETRY
   AS
   BEGIN
      IF ( p_point_one.Z IS NULL AND p_point_two.Z IS NOT NULL )
      OR ( p_point_one.Z IS NOT NULL AND p_point_two.Z IS NULL )
      THEN
         RAISE_APPLICATION_ERROR(
            -20001,
            'both points must have the same number of dimensions, point_one Z is ' ||
            NVL(TO_CHAR(p_point_one.Z),'') ||
            ' and point_two Z is ' ||
            NVL(TO_CHAR(p_point_two.Z),'')
      END IF;
      IF p_point_one.Z IS NULL
      THEN
         RETURN SDO_GEOMETRY(
             2002
            ,p_srid
            ,NULL
            ,SDO_ELEM_INFO_ARRAY(1,2,1)
            ,SDO_ORDINATE_ARRAY(p_point_one.X,p_point_one.Y,p_point_two.X,p_point_two.Y)
      ELSE
         RETURN SDO_GEOMETRY(
             3002
            ,p_srid
            ,NULL
            ,SDO_ELEM_INFO_ARRAY(1,2,1)
            ,SDO_ORDINATE_ARRAY(p_point_one.X,p_point_one.Y,p_point_one.Z,p_point_two.X,p_point_two.Y,p_point_two.Z)
      END IF;
   END points2segment;
   FUNCTION points2segment(
       p_point_one              IN MDSYS.SDO_GEOMETRY
      ,p_point_two              IN MDSYS.SDO_GEOMETRY
   ) RETURN MDSYS.SDO_GEOMETRY
   AS
      int_gtype1 PLS_INTEGER;
      int_dims1 PLS_INTEGER;
      int_gtype2 PLS_INTEGER;
      int_dims2 PLS_INTEGER;
      point_one MDSYS.SDO_POINT_TYPE;
      point_two MDSYS.SDO_POINT_TYPE;
   BEGIN
      int_gtype1 := p_point_one.get_gtype();
      int_dims1 := p_point_one.get_dims();
      int_gtype2 := p_point_two.get_gtype();
      int_dims2 := p_point_two.get_dims();
      IF int_gtype1 = 1
      AND int_gtype2 = 1
      AND int_dims1 = int_dims2
      AND p_point_one.SDO_SRID = p_point_two.SDO_SRID
      THEN
         NULL; -- Good
      ELSE
         RAISE_APPLICATION_ERROR(
             -20001
            ,'both point objects must be points and have the same number of dimensions and SRIDs'
      END IF;
      IF int_dims1 = 4
      THEN
         RETURN SDO_GEOMETRY(
             4402
            ,p_point_one.SDO_SRID
            ,NULL
            ,SDO_ELEM_INFO_ARRAY(1,2,1)
            ,SDO_ORDINATE_ARRAY(
                 p_point_one.SDO_ORDINATES(1)
                ,p_point_one.SDO_ORDINATES(2)
                ,p_point_one.SDO_ORDINATES(3)
                ,p_point_one.SDO_ORDINATES(4)
                ,p_point_two.SDO_ORDINATES(1)
                ,p_point_two.SDO_ORDINATES(2)
                ,p_point_two.SDO_ORDINATES(3)
                ,p_point_two.SDO_ORDINATES(4)
      ELSE
         -- Use the sdo_point_type method for the rest
         IF p_point_one.SDO_POINT IS NOT NULL
         THEN
            point_one := p_point_one.SDO_POINT;
         ELSE
            IF int_dims1 = 3
            THEN
               point_one := SDO_POINT_TYPE(
                   p_point_one.SDO_ORDINATES(1)
                  ,p_point_one.SDO_ORDINATES(2)
                  ,p_point_one.SDO_ORDINATES(3)
            ELSE
               point_one := SDO_POINT_TYPE(
                   p_point_one.SDO_ORDINATES(1)
                  ,p_point_one.SDO_ORDINATES(2)
                  ,NULL
            END IF;
         END IF;
         IF p_point_two.SDO_POINT IS NOT NULL
         THEN
            point_two := p_point_two.SDO_POINT;
         ELSE
            IF int_dims1 = 3
            THEN
               point_two := SDO_POINT_TYPE(
                    p_point_two.SDO_ORDINATES(1)
                   ,p_point_two.SDO_ORDINATES(2)
                   ,p_point_two.SDO_ORDINATES(3)
            ELSE
               point_two := SDO_POINT_TYPE(
                   p_point_two.SDO_ORDINATES(1)
                  ,p_point_two.SDO_ORDINATES(2)
                  ,NULL
            END IF;
         END IF;
         RETURN points2segment(
             p_point_one   => point_one
            ,p_point_two   => point_two
            ,p_srid        => p_point_one.SDO_SRID
      END IF;
   END points2segment;
   FUNCTION linear_gap_filler(
       p_input            IN MDSYS.SDO_GEOMETRY
      ,p_tolerance        IN NUMBER DEFAULT 0.05
   ) RETURN MDSYS.SDO_GEOMETRY
   AS
      sdo_input     MDSYS.SDO_GEOMETRY := p_input;
      num_tolerance NUMBER;
      int_counter   PLS_INTEGER;
      ary_edges     MDSYS.SDO_GEOMETRY_ARRAY;
      ary_starts    MDSYS.SDO_GEOMETRY_ARRAY;
      ary_ends      MDSYS.SDO_GEOMETRY_ARRAY;
      ary_nearest   MDSYS.SDO_NUMBER_ARRAY;
      ary_distance MDSYS.SDO_NUMBER_ARRAY;
      num_temp      NUMBER;
      num_nearest   NUMBER;
      int_winner    PLS_INTEGER;
      int_winner2   PLS_INTEGER;
      sdo_point1    MDSYS.SDO_GEOMETRY;
      sdo_point2    MDSYS.SDO_GEOMETRY;
      boo_done      BOOLEAN;
      num_one       NUMBER;
      num_two       NUMBER;
      int_looper    PLS_INTEGER := 1;
   BEGIN
      -- Step 10
      -- Check over incoming parameters
      IF num_tolerance IS NULL
      THEN
         num_tolerance := 0.05;
      END IF;
      IF sdo_input IS NULL
      OR sdo_input.get_gtype() <> 6
      THEN
         RETURN sdo_input;
      END IF;
      IF is_spaghetti(sdo_input,p_tolerance) = 'TRUE'
      THEN
         RETURN sdo_input;
      END IF;
      <>      ary_edges     := MDSYS.SDO_GEOMETRY_ARRAY();
      ary_starts    := MDSYS.SDO_GEOMETRY_ARRAY();
      ary_ends      := MDSYS.SDO_GEOMETRY_ARRAY();
      ary_nearest   := MDSYS.SDO_NUMBER_ARRAY();
      ary_distance := MDSYS.SDO_NUMBER_ARRAY();
      -- Step 20
      -- Break multistring into edges and start and end nodes
      int_counter := SDO_UTIL.GETNUMELEM(sdo_input);
      ary_edges.EXTEND(int_counter);
      ary_starts.EXTEND(int_counter);
      ary_ends.EXTEND(int_counter);
      FOR i IN 1 .. int_counter
      LOOP
         ary_edges(i) := SDO_UTIL.EXTRACT(sdo_input,i);
         ary_starts(i) := get_start_point(ary_edges(i));
         ary_ends(i)   := get_end_point(ary_edges(i));
      END LOOP;
      -- Step 30
      -- Determine the closest endpoints
      ary_nearest.EXTEND(int_counter);
      ary_distance.EXTEND(int_counter);
      FOR i IN 1 .. int_counter
      LOOP
         num_nearest := NULL;
         int_winner := NULL;
         FOR j IN 1 .. int_counter
         LOOP
            IF j != i
            THEN
               num_temp := SDO_GEOM.SDO_DISTANCE(
                   ary_edges(i)
                  ,ary_edges(j)
                  ,num_tolerance
               IF num_nearest IS NULL
               OR num_temp < num_nearest
               THEN
                  num_nearest := num_temp;
                  int_winner := j;
               END IF;
            END IF;
         END LOOP;
         ary_nearest(i) := int_winner;
         ary_distance(i) := num_nearest;
      END LOOP;
      -- Step 40
      -- Find the smallest gap
      int_winner := NULL;
      num_nearest := NULL;
      FOR i IN 1 .. int_counter
      LOOP
         IF num_nearest IS NULL
         OR ary_distance(i) < num_nearest
         THEN
             int_winner := i;
             num_nearest := ary_distance(i);
             int_winner2 := ary_nearest(i);
         END IF;
      END LOOP;
      -- Step 50
      -- Determine the endpoints to connect
      num_one := SDO_GEOM.SDO_DISTANCE(
         get_start_point(ary_edges(int_winner)),
         ary_edges(int_winner2),
         num_tolerance
      num_two := SDO_GEOM.SDO_DISTANCE(
         get_end_point(ary_edges(int_winner)),
         ary_edges(int_winner2),
         num_tolerance
      IF ( num_one = 0 AND SDO_GEOM.RELATE(
         get_start_point(ary_edges(int_winner)),
         'ANYINTERACT',
         ary_edges(int_winner2),
         num_tolerance
      ) = 'TRUE' )
      OR ( num_two = 0 AND SDO_GEOM.RELATE(
         get_end_point(ary_edges(int_winner)),
         'ANYINTERACT',
         ary_edges(int_winner2),
         num_tolerance
      ) = 'TRUE' )
      THEN
         sdo_point1 := NULL;
      ELSIF num_one < num_two
      THEN
         sdo_point1 := get_start_point(ary_edges(int_winner));
      ELSE
         sdo_point1 := get_end_point(ary_edges(int_winner));
      END IF;
      num_one := SDO_GEOM.SDO_DISTANCE(
         get_start_point(ary_edges(int_winner2)),
         ary_edges(int_winner),
         num_tolerance
      num_two := SDO_GEOM.SDO_DISTANCE(
         get_end_point(ary_edges(int_winner2)),
         ary_edges(int_winner),
         num_tolerance
      IF ( num_one = 0 AND SDO_GEOM.RELATE(
         get_start_point(ary_edges(int_winner2)),
         'ANYINTERACT',
         ary_edges(int_winner),
         num_tolerance
      ) = 'TRUE' )
      OR ( num_two = 0 AND SDO_GEOM.RELATE(
         get_end_point(ary_edges(int_winner2)),
         'ANYINTERACT',
         ary_edges(int_winner),
         num_tolerance
      ) = 'TRUE' )
      THEN
         sdo_point2 := NULL;
      ELSIF num_one < num_two
      THEN
         sdo_point2 := get_start_point(ary_edges(int_winner2));
      ELSE
         sdo_point2 := get_end_point(ary_edges(int_winner2));
      END IF;
      -- Step 50
      -- Smash together
      IF sdo_point1 IS NULL
      OR sdo_point2 IS NULL
      THEN
         sdo_input := SDO_UTIL.CONCAT_LINES(
            ary_edges(int_winner),
            ary_edges(int_winner2)
      ELSE
         sdo_input := SDO_UTIL.CONCAT_LINES(
            SDO_UTIL.CONCAT_LINES(
               ary_edges(int_winner),
               points2segment(sdo_point1,sdo_point2)
            ary_edges(int_winner2)
      END IF;
      boo_done := TRUE;
      FOR i IN 1 .. int_counter
      LOOP
         IF i NOT IN (int_winner,int_winner2)
         THEN
            sdo_input := SDO_UTIL.APPEND(sdo_input,ary_edges(i));
            boo_done := FALSE;
         END IF;
      END LOOP;
      -- Step 60
      -- Check if valid if returning
      IF sdo_input.get_gtype() = 2
      OR boo_done = TRUE
      THEN
         RETURN sdo_input;
      END IF;
      int_looper := int_looper + 1;
      GOTO TOP_OF_IT;
   END linear_gap_filler;
END dz_gap_fill;

Kerning removed when pasting word document into indd.

I am trying to paste a set of tables into indd. I converted the PDF to a DOC using Acrobat Pro, and it looks and behaves fine in Word. But when I paste it into place all of the kerning is removed. Why is this happening and how do I stop it?

Hmmm, well I've reproduced it.
Can't explain it.
But I reproduced it. It's not a matter of "kerning" but rather the exclusion of the regular space character.
I tried converting table to text (in Word), then converting it back to a table before placing, and the spaces were preserved, but aside from all the space characters having a "custom tracking" value applied, the round-trip conversion resulted in a mangled layout anyway, so it was really only good for experimental purposes in the end.
In my standard workflows, I rarely if ever Place text-based content, and it's likely because scenarios like this were involved in the evolution of my habits. Word tables and InDesign tables have very little in common, and I would probably bring in plain text and reconstruct the table(s) in InDesign, if this was my project, without having even tried to Place. Actually, I've had better luck (copy/paste) with Excel to InDesign tables.

When i attach workflow to document library, the custom columns data is not saving.

Hi, i had created SharePoint designer workflow (send Email) for Document Library.
I had created Custom columns like.
"Employee Name" of type Person or Group
"Resume Type" of type Choice
When i attach my workflow to document library, the columns data is not saved.
It is just uploading resume, and sends email to the user groups, but data is not saved for custom columns. !.e "Employee Name" and "Resume Type".
Any help will be appreciated.

In SharePoint Document Library, first the document will be uploaded and then the metadata will be updated. So, in your workflow settings, select start workflow when item is changed instead of item is created and then try.

I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually.

I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually since I have a iTouch and keep all my music there. HELP!!

Have you tried deleting the songs from Settings?
Settings -> General -> Usage -> Manage Storage (not the iCloud link!) -> Music and then click Edit to enable you to be able to delete.

FRM-40735 WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-065

Please help....This error is comming when opening the form. The form is running on oracle 11g 64bits web logic.
"FRM-40735 WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-065"

Welcome to OTN
Before posting on this forum please read
FRM-40735: WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-06502.
you'll get some hint here
Oracle/PLSQL: ORA-06502 Error

When I move items to the trash they do not go into the trash, they are deleted entirely

Heading above pretty much explains it. Sometime recently, my trash started acting differently - when I attempt to move an item into the trash, I get a message asking if I want to delete the item permanently. I am sure this is a fairly new phenomenon.

Click on the item in the Finder's sidebar with the house icon and verify that you are able to write to this folder in the Sharing & Permissions section of the Get Info window, and that it isn't locked; if it is already set this way and you get that error, open the Terminal in the /Applications/Utilities/ folder and run the following:
mkdir ~/.Trash
If you get a message stating that the folder exists, run the following:
sudo chown $UID ~/.Trash
chmod u+rwx ~/.Trash
The first command in the second set will prompt you for your administrator password; nothing will appear in the Terminal window while it is being typed. In either case, click on the Finder icon in the Dock with the Control and Option keys pressed, and relaunch it.
(79947)

Remove gaps when drawing custom items into column data browser

Similar Messages

Maybe you are looking for