Remove time tooltip from calendar view

Hi,
I removed the default time from calendar view using some css code, but time tool tip is still showing when i hover it. How can i remove default time from calendar tooltip.

For hiding times in Calendar View:
Just add CSS to the page:
.ms-acal-time{display:none;}
and for ToolTip; refer this also:
http://social.technet.microsoft.com/Forums/eu/sharepoint2010customization/thread/1f89abca-ce1b-49b0-bcf8-ecbabcb13fc6

Similar Messages

Removing live nodes from cluster view.

Hi All,
          We are experiencing some JMS problems connected with a cluster node being
          hung for some time.
          The following took place just before the problem arises:
          1. First of all one of the nodes (the first) gets one thread
          (weblogic.jms.backend.BEPushRequestSender@76512c) stuck.
          2. After that it closes the TCP connection to another node and
          3. Removes another node from its cluster view.(that is alive)
          4. After that the second node removes the first from its cluster
          view.
          5. Seconds later they find each other again and add each other to the
          cluster view.
          6. After that, the JMS distributed members are connected to each other,
          7. Something strange happens, because either the first node starts
          missing many messages in its distributed topic member or the second
          node doesn't propagate messages from distributed topic to the first
          node.
          Is it possible to set up weblogic cluster in a way, it won't remove
          other members from cluster view by peer gone exception, only by
          heartbeat timeout? Is heartbeat retry time parameter is configurable?
          Any help with this matter will be greatly appreciated.
          Dmitry Finkelstein


You must run the update node list for each ORACLE_HOME on that machine. If this is RAC, the runInstaller will take care to update all nodes, so again, you run it once per ORACLE_HOME installed.
Shared Home is a single copy of the Oracle software, rather than each node holding their own copy of the software. There's a paper that talks about these two topics and gives some examples of full commands on OTN:
http://www.oracle.com/technology/products/database/clustering/index.html
"Oracle Homes in an Oracle Real Application Clusters Environment(PDF) January 2008"
direct link: http://www.oracle.com/technology/products/database/clustering/pdf/oh_rac.pdf
Enjoy and hope this helps.
Saar.

Remove duplicate holidays from calendar mac

How do I remove duplicate holidays from calendar mac. I have iCloud and I have read that may be part of the problem, but I need help to remove duplicate holidays from calendar mac.
Thanks

If you have iCloud and another account like Gmail, you could be seeing holdays for each account. You need to deselect one of the holiday calendars.
Do you see Holidays in the sidebar where Calendars are listed? If yes, uncheck.
iCloud: About subscribed calendars - Apple Support

How do I remove a url from "Always view this page in IE"

How do I remove a URL from "Always view this page in IE"?

After the new server is added to the cluster and the AG, remove the old one by first
ALTER AVAILABILITY GROUP [YourAG]
REMOVE REPLICA ON N'OldServer';
Remove a Secondary Replica from an Availability Group
Then evict the old server from the cluster with the cluster administrator or
Remove-ClusterNode OldServer
Remember to verify the quorum configuration after adding the new server and removing the old server.
David
David http://blogs.msdn.com/b/dbrowne/

HT2513 After accepting the new Apple upgrade to iOS 7.1 on my iPhone 4S, I cannot remove the half month calendar view to show only the daily view. Help!

After accepting the new Apple upgrade to iOS 7.1 on my iPhone 4S, I cannot remove the half month calendar view to show only the daily view. Help!

Before you panic, try resetting your iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

Is there any way to remove timezone dropdown from calendar prompt

We are using a different prompt to set timezone and I was evaluating to see if there is any way to remove timezone drop down from calendar prompt, User will input only time stamp.
Appreciate your help.
Srix

Are you talking about the Time Remaining display on the side bar? The text for that field is in the Modify Text Labels... tool in the Theme Editor of Presenter. You can change it to whatever you want, but you may want to keep a record of what the default text labels are, as there is no restore to default option. The Elapsed Time field is what you would want to change. I have seen this modified to show no text, copyright information or other general info.

Bug in JDev 9.0.3.3 when removing joined entities from a view

Hi,
I observed in JDev 9.0.3.3 the following behavior for views containing several joined entities:
     -I'm creating the view V1 based on the entity E1 and generate the row implementation java file with accessors (close wizard)
     -I'm joining a second entity E2 and add a couple of attributes from it (close wizard)
     -I'm removing the joined entity E2 (close wizard)
     -now look in the ViewRowImpl file: the accessors for the attributes from E2 are gone, but the accessor to E2, getE2(), is still there!
Regards,
Dan

Yes you are right. I've discoverd this bug too. Unfortunately this bug has some ugly effects when running the code, so this is not a litte quirk but I real bug! It is necessary fix the xml-files by hand after removing a joined entity from a view (At least I didn't find another way to fix this).

Can Not Remove "with" Data from Calendar Event Details

I currently have a Palm Tungsten|E2. For a short time I used to sync it with my work computer; this was before they replaced the computer (lease was up) with a new one where it was locked down and I could not reinstall the Palm desktop. Since then I have been syncing it with my home computer that runs MS Vista. Just recently I have noticed that when I create new Calendar events on my Palm, they all get a new "With:" data line (and a user from my old job) after sync'ing with my home computer. Selecting this "With:" entry brings me to a screen that allows me to select from a list of people I may "Done", "Reply", or "Reply All" to; although selecting either reply only causes a fatal error that requires a soft reset (button on back of machine). Looking at the event through the desktop software shows no data point so that it may be cleaned.
I would like to know why my desktop software is adding this person to a "With:" data point to all new entires I create on the Palm hardware, how do I turn it off and keep it from doing it in the future.
Steve
Post relates to: Tungsten E2
This question was solved.
View Solution.

Are you sync'ing the new device to the same username in Palm Desktop as an older device?
If you are, this will cause problems on the new device. When you sync the device, it saves the device settings, 3rd party apps, preferences, etc. in the backup folder in the username folder on the PC. When you sync the new device it copies the contents of the backup folder for the old device to the new device. This will cause corruption in the settings for the new device thus causing erratic behavior of the new device.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
Looks like you may need to hard reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Next before you hotsync your data back over you will need to rename your backup folder, to do that go here;
XP
C:\program files\palm or palm one\[hotsync username]\ and rename your backup
folder to backup.old
Vista
Start-->documents\Palm OS Desktop\[hotsync username]\ and rename your backup
folder to backup.old
Then hotsync to your current hotsync name and all your contacts, calendar,
tasks, and memos will come back over.
Show file extensions for XP or Vista
XP
If you can not view file extensions on your PC I would like you to open a
folder go to Tools-->Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Vista
Open control Panel go to Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Post relates to: Palm i705

Remove all tooltips from PDF Fom in Acrobat 9 Pro

I am trying to convert an Excel form into a PDF form. There are a couple of hundred fields in the form. By default, when I convert the excel file to a PDF form, Acrobat names all the fields automatically and this name is added to the tooltip. So when mouse hovers over the fields the tooltips show on all fields (e.g. for the column "Day" fields will show tool tips "Day_Row1", "Day_Row2" and so on)
I know I can remove the tool tips by going to the field's properties and deleting the text in the tooltip box, but I do not want to do this for 200 fields one at a time.
Is there a way I can tell the Acrobat to not fill in the Tooltips automatically when the form is converted from Excel file?
Thanks

I am creating the PDF Form using Acrobat 9 Pro. If I make changes in the preferences to not display the tooltips, it only disables the display of the tooltips in Acrobat on my computer. I want the tooltips to be cleared or not display on all PDF viewers by default.

How do I remove Time Machine from an external disk

After trying it once, I decided that I do not want to use Time Machine. I only want to backup user directories, and use the disk to hold other things. Problem is that I can't reformat the disk and remove the Time Machine stuff. Right clicking only gives me limited options. Is there any way to remove the Time Machine stuff from this disk?

TM data is just that, data.
First, be sure you disconnect the TM engine from the drive in the TM preferences by turning the switch to Off.
There is no right-clicking involved.
Run the disk utility, select the drive and erase/format/partition or whatever. Nothing to it.

Time missing from clip view

Im trying to edit a video for work and i have already gone through and marked time segments to reject clips from becasue of speaking errors. The issue is that in this new version of iMovie i cant figure out a way to view the clip time so i can easily select that area and reject the time frames that i already have.
Has anyone found a way to bring the clip time HH:MM:SS back into the new iMovie?

Settings > General > Reset > Rest all settings.
This won't effect your data.

Want to remove time code from footage of a Video_TS folder

I received footage my client wants cut but the footage she received from her videographers is a DVD with the time code on it. Im pretty sure I cant, but is it possible to remove the timecode window or do I need to get a version from the videographer sans timecode?

Sounds like a burn-in to me.
I'd ask for a version without.
Also, you're going to have to transcode to an editable format if your stuff comes on a playable DVD.
While you're asking for a version without the TC burn-in, ask for a quicktime instead of a playable DVD.

How to remove moon cycles from calendars

My girlfriend has her me.com account and I do also. All of a sudden moon cycles popped up on dashboard and calendar on her phone. How the heck to get rid of them. ? Thanks.
Bruce Albro

I don't think there is a way to just remove the moons...Or maybe you can request it.
https://www.apple.com/feedback/iphone.html
You can mark the post if it solved your question

How to remove time zone from date time column?

Hello all,
I have one birthday calendar list where I am showing birthdays of employees in acompany.
Now when I display Date in a page I am getting the below output:
Fri Sep 19 2014 00:00:00 GMT-0700 (Pacific Standard Time)
Here I just want the below thing as an output:
Fri Sep 19 2014
the other things like 00:00:00 GMT-0700 (Pacific Standard Time)
How should I achieve it?
Thanks in Advance.

Hi
you should use XSLT datetime formatting
http://amavs.wordpress.com/tag/formatdatetime/
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

Remove time stamp from date

hi guys
Had start date and end date as prompt in webi report and showing same date value in report header using UserResponse function but it is showing time with date, and in report both columns are showing in dd/mm/yyyy format, have tried using FormatDate(UserResponse("Start Date:"); "dd mmm yyyy"), it is giving an error
" The expression/sub-expression uses an invalid data type"
please tell me what is wrong in the formula
thanks & regards

Hi,
It is creating an #ERROR when the format you assign to the ToDate function does not match the date in the string.
E.g. if you have a user response like '1/1/1998 12:00:00AM' you could use the formula:
=FormatDate(ToDate(Left(UserResponse("prompt");8);"M/d/yyyy");"dd MMM yyyy")
to get a result as: 01 JAN 1998
However this fails when the date changes to 10/1/1998 or 1/10/1998 or 10/10/1998. In those cases the format of the ToDate function should be: "MM/d/yyyy" or "M/dd/yyyy" or "MM/dd/yyyy".
I know it's a lot of work, but the best solution is to create variables for month, day and year:
1. variable for month v_month
=Left([prompt_date];Pos([prompt_date];"/")-1)
2. we need to get rid of the first part of the string to find the second '/' so we create a dummy variable dummy1
=Right([prompt_date];Length([prompt_date])-(Length([v_month])+1))
3. variable for day v_day
=Left([dummy1];Pos([dummy1];"/")-1)
4. create a second dummy variable dummy 2 to get rid of the day part of the string
==Right([dummy1];Length([dummy1])-(Length([v_day])+1))
5. variable for year v_year
=Left([dummy2];4)
Just assuming that the year is always 4 positions in the prompt string.
Now you can create your variable for displaying the date in the format you want:
==FormatDate(ToDate(FormatNumber(ToNumber([v_month]);"00")+FormatNumber(ToNumber([v_day]);"00")+FormatNumber(ToNumber([v_year]);"0000");"MMddyyyy");"dd MMM yyyy")
Note: I was just assuming that your date format is always month/day/year. If the format is different then you need to change the variables accordingly.
Hope this helps
Harry

Remove time tooltip from calendar view

Similar Messages

Maybe you are looking for