Removing control from panel

I have a panel which dynamically get filled with controls, but I need to reuse that panel for a new set. is there a way to clear its contents so that the new set can be put there?

Have a look at the CardLayout.

Similar Messages

Remove Control from Memory

I've written a VI using VI Scripting that creates an Enum based on an array of Names. For example, if I have an array with "Initialize", "Process", "Exit", I can create a control "State.ctl" consisting of an Enum with these values.
The trouble comes from wanting to "redo" (i.e. re-run) this VI, say because I want to add another state, "Clean-up". If the original VI is in memory (because I'm developing code, and have used it), when I run my Create Enum script, it gives Error 1357 when it tries to write State.ctl, saying it is already in memory. One solution is to exit LabVIEW, restart, and run fresh, with the control-to-be-overwritten not (yet) in memory.
Is there a way to Have My Cake and Eat It, Too? Can I write a VI that will inquire if State.ctl is in memory (for example, by wiring just the name to an Open VI Reference and seeing if there is no error, which means it's in memory) and then purging it from memory? If so, I could avoid the 1357 error.
BS

The All VIs in Memory App property will tell you whether or not the control is still in memory. Alternately, you can try opening it with just the name instead of a full path. If it is in memory, the open will succeed. If the open succeeds, just add the new item. If not, create the whole thing.
Closing something in memory is tricky, since LabVIEW has all sorts of optimizations to keep things in memory and so avoid reloading. You would need to ensure all callees are closed, at the least. You could do this by recursively calling the VI property Caller's Names until you get to the top. Close everything and it should eventually go out of memory.
This account is no longer active. Contact ShadesOfGray for current posts and information.

HT5858 In control centre some how facebook app is getting displayed I dont want any app to be clickable from control centre how to remove it from control centre panel

In control centre some how facebook app is getting displayed I dont want any app to be clickable from control centre how to remove it from control centre panel

.

Reg.Remove quesitions from my control panel.

Dear Friends
I have 7 posts in my forum which is blocked by SDN moderator,I want to remove those questions from unanswered status.
Please guide me how to remove from my control panel.
I am unable to ask more than 3 questions that there are 7 pending.
Thanks
Rajakumar.K

Dear Juergen
As per your advice I have mentioned the threads and my user ID and Password.
""" SAP allows 10 open questions at a time.
Locked questions are not considered as closed. So your possible open questions get reduced by any locked question.
I think the questions got locked for a good reason.
Unfortunatly I cannot search for these threads, Send me the links to each locked one to my mail address (can be found in my business card) and I will see what I can do. """
Please remove my all questions and make it empty.
Reg. TAX and VAT configuration
Reg. Logistic execution process in MM
Reg.Number range collapsed in production server -FBN1(NRIV table)
Reg.Blueprint process
reg. Tax code in procedure TAXINJ is invalid
Reg. New material type creation
Reg.Std hierarchy creation problem
Reg.Remove quesitions from my control panel.
Thanks
Rajakumar.K

How do I remove Bing from my toolbar at the top of the page. I have already tried both of the suggestions given in the help section; I could not find Bing in my control panel "add and remove programs," and there was one other suggestion which I also tried

''locking due the age of this thread - asked and answered''
I have tried all of the suggestions given by FF in order to remove Bing from my computer but nothing seems to work. I would appreciate some advise. For instance when I go to add and remove programs I can't even find Bing listed. Looking forward to your suggestions. Thanks.
== This happened ==
Every time Firefox opened
== I first installed Firefox

Right click "Tools". Uncheck "Search Toolbars".

If "Sweet" IM is "riding" in on Firefox, how is it removed from Firefox? I have removed it from my laptop via Windows Controls, but it continues to display on FB.

I recently downloaded the Sweet IM emoticon app to augment my Yahoo Messenger app. I later removed it from my list of Windows pgms using the Control Panel, remove pgms feature, and I deleted all the Sweet IM cookies. All that appears to have worked. But the Sweet IC toolbar continues to appear embedded in the body of my FB page at the top just above where new statuses are entered. It also continues to appear in all my chat windows. Any ideas on how I can get rid of these displays? They are now unnecessary page clutter. Thank you.

On Windows Vista and Windows 7, profile folders are in this location, by default:
C:\Users\<Windows login/user name>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile folder>.
The AppData folder is a hidden folder; to show hidden folders, open a Windows Explorer window and choose "Organize → Folder and Search Options → Folder Options → View (tab) → Show hidden files and folders".
On Windows 2000, XP, Vista, and Windows 7, you can also use this path to find the profile folder, even when it is hidden:
%APPDATA%\Mozilla\Firefox\Profiles\<profile folder>
%APPDATA% is a variable represents the C:\Documents and Settings\<user name>Application Data folder on Windows 2000/XP and the C:\Users\<user name>\AppData\Roaming folder on Windows vista and Windows 7. Image:Appdata.png
To find a profile folder in the default location on Windows 2000, XP, Vista, or Windows 7:
Press "Windows key Image:Windows_Key.png + R" to open the Run box
(or, you can click "Start → Run..." on Windows 2000/XP)
In the Run box, type in %APPDATA%
Click OK. A Windows Explorer window will appear.
In this window, choose Mozilla → Firefox → Profiles.
Each folder in the "Profiles" folder (e.g., "xxxxxxxx.default") is a profile on your computer.

How do you remove items from the assets panel that are duplicated?

How do you remove items from the assets panel that are duplicated?

If you add an item to a slideshow, you'll usually see 2 entries for that image in the assets panel - one represents the thumbnail, and the other represents the larger 'hero' image.
It sounds like you may have added the same image to your slideshow twice. You can select one of the hero images or thumbnail images in your slideshow and use the delete key to remove it. Then the extra 2 entries in the assets panel should disappear.

How do I select a control based on another control's selection and how do I remove enumerations from a control?

Hi everyone,
I have a question and I *think* the answer may be the new active controls, so here goes: I have a control which contains a variety of enumerated items - essentially a typedef enum. I may have up to several dozen items in this control, like this:
Position - 1
Current - 2
Pressure - 3
Temperature - 4
Duty Cycle - 5, etc.
I also have a 2nd control (actually a set of controls) that refer to the indices of the above control. For example, if I "Position" chosen, I wish the 2nd control to appear that refers to position - an enumeration with "X axis, Y axis, etc." If I select "Temperature", I wish the 2nd control to appear that refers to temperature - a different typedef'd enum - "Inlet, Outlet, Air, Water, etc."
How do I do this?
Lastly, the first enum with ALL of the items, pressure, current, etc. does not need to be used. For certain configurations, I wish to eliminate, say the 1st and 3rd item - I don't wish to just gray them out, I wish to remove them from the enumeration, WITHOUT changing their enumerated value. Perhaps I need to write the resultant enum into a temporary ring enum - any ideas?
Thanks,
Jason

Unfortunately, you cannot edit the list of enums during runtime, only during edit mode. You can use a ring control however. Then you can use the Strings[] property to set the selections to whatever you want depending upon the 1st enum. See attached vi.
- tbob
Inventor of the WORM Global
Attachments:
ChangeRing.vi ‏52 KB

10.4.9 removes Brightness Control from System Preferences?!

Has anyone else noticed that the Intel 10.4.9 update has removed Brightness Control from their System Prefs?!
maybe it's just mine... seems unlikely!!!

No, mine still has it. Perhaps it no longer thinks you can adjust the brightness. You may try the "standard" repair techniques to see if it will come back: Repair permissions, repair the disk (you must start up from installer DVD or use Safe Mode--which takes a while to boot because it is checking the disk), and then running the combo updater instead of Software Update.
1.8 SP G5/iMac G4 FP/MBP 2.33/PB G3 Pismo Mac OS X (10.4.9) XLR8 G4 Upgrade for Pismo

Can i place controls from the properties dialog of an express vi on the front panel?

I'm using the spectral measurements express vi in my vi and I'd like to put the "window" and "number of averages" controls from the properties dialog on the front panel. However, there are not outputs on the express vi icon for these parameters. Can I place controls for these on the front panel somehow or do I always have to go into the block diagram and open the properties dialog to change the values?

The way to do this is to right click on the express VI and select Open Front Panel. This will convert it to a standard subVI. then go into the subVI and replace the Spectrum Averaging and Spectrum Window constants to front panel controls by right click on them. Right click the icon and select Show Connector. Wire the new controls to a free terminal on the connector. You may have to add additional terminals if there aren't any available to wire to the new controls.

How to remove focus from a Ring Control in a PDA application?

Hello,
In a PDA application, i have observed that when we select a pull-down Ring control, the focus is retained in the control and the text of the control appears highlighted. The only way out is to tap an empty portion of the PDA application screen to remove focus from the control. Is there any way to avoid this? Is there a method to remove focus from the control programatically?
Note: Version of LabVIEW that we are using: LabVIEW 8.5 Professional Development System for Windows Vista/XP/2000 and LabVIEW 8.5 PDA Module for Windows Mobile.
Thanks & Regards,
Subhashini

Hi Vsh,
Thanks for ur response. Setting the key focus property node of the ring control to false removed the focus from the control. I guess it was a silly question (have started LabVIEW devp. recently).
Thanks & Regards,
Subhashini

How do I remove Messages from Mission Control?

I double clicked the top near the resize arrow mistakenly and it made its own screen in Mission Control. I've been looking online but I can't find out how to remove it. I've tried the control+click but it doesn't show the x. I don't want my messages in Mission Control as it just full screens it. I tried quitting and reopening but it just keeps opening my message window in the Mission Control full screen style. Even restarted my computer.

I figured it out on my own finally. If for some reason you have a messages chat window open on its own as a full screen in the Mission Control and you want to remove it from Mission Control, just command+W and close the window that is currently open in Mission Control. Then Messages returns to normal. Also figured out that if you click those arrows at the top right hand side, it will full screen it in Mission Control. Those arrows are not the resize!

Hide/Remove iTunes from control center in iOS 7?

How do you hide/remove the iTunes controls from the control center in iOS 7 for the iPhone?
I almost never use the music on my phone, and dislike how much space the blank controls take up.

You cannot change things in control center.
For more information about control center:
http://support.apple.com/kb/HT5858

Method or property to remove decorations from a control

Hi folk,
by program, I would like to remove (to make transparent) some decorations of a control (the 3d border of an Intensity Graph) before to save it on a png/jpg file.
Do you know how to perform that task by method or property?
Regard,
Asper

Dear Ben,
thanks for your workaround suggestion.
I already use the Get Image node, but I believe that this is not the right way. I would like to preserve all features like scales, scale labels etc. and strip out only the 3d border and other decorations.
"slice and dice" the image is not possible because it would cut parts of scales. Now I am using the "Create Mask.vi" to delete the color that is associated with the border. This approach works not very well too.
The 3d border has a color gradient and it is necessary to delete all colors associated to the 3d border gradient.
Further the 3d border changes size and number of gradient colors with the zooming of the windows. Not last, the size of plot area changes with variation of the minimum and maximum of scale limits.
Programmaticly is not so clear which points should be selected to detect the colors to mask.
Any method or property to remove decorations from a control?
Asper

HELP! I need to be able to remove power from a PXI chassis and replace a card without rebooting the whole system

I do not have particulars on the controller, but I am sure it's an NI chassis
and NI regular controller that has a serial cable leading back to the PC.
I am making this PXI rack into a debug rack for instrument cards,
so I need to be able to remove power from just the PXI chassis
and then replace the card with another one
or the same one and then turn the power back on and restart a
diagnostic test on the card WITHOUT
having to reboot the PC.
Is there a PCIe bridge setup that would allow me to do this?
Is there software that I need that can accomplish this?

Yes
The Chassi is a NI PXI 1045
and the controller is a NI-PXI-8331
Let me re-enumerate my requirements:
Background:
I have a number of NI cards as well as other manufactured cards in the system.
One of these cards in the NI system is considered to be a UUT.
That is, I am using the NI card cage system and other cards in the system to test a CARD
during a manufacturing test of said UUT CARD.
The UUT uses a PLX 9030 for it's PCI interfacing.
This UUT is not designed for hot swap, and I do not bieleve it is plug and play.
Requirement:
1. I need to be able to shut off the chassis and remove the UUT when the test finishes, replace the tested UUT
with a unknown UUT, re-apply power and then test the new UUT WITHOUT having to reboot the PC.
I have tried several things, such as disabling the PCIe busses in the windows control panel, and then removing power
replacing the UUT with the next one, re-applying chassis power and then re-enabling the bus and SOMETIMES it works.
I need a very robust way to do this.
I also bought a CHROMA PXI-52906-E extender card with bus switches on it, so that I can remove power to the UUT
without shutting off the chassis. The card is supposedley designed so that when power is re-applied to the UUT, the necessary
signals to boot the PXI PCI interface is conducted, but I think something else has to be written to the card's PCI registers.
I am by no means an expert in PCI/PXI,
but I seem to have exhausted all of my reserach online in how to meet my requirements.
Perhaps there is a way for the NI8331 controller to capture PCI configuration data to the card's on system boot,
and then "replay it" to my UUT after I re-apply power to the UUT?
Or perhaps PLX makes such a tool?
Any ideas?

Removing control from panel

Similar Messages

Maybe you are looking for