Render previews seems to not always update all modified photos

Here's what I do:
I use a tower and a laptop. On my tower I have all the original photos available for Lr, on the laptop not. I keep all of my photos in a single catalog, and when I'm not at home I use the catalog on an external harddrive. So I would like all of my previews being up-to-date. Therefore I start the Lr catalog from my external harddrive while it is connected to my tower (hence having access to all originals) and choose to render the standard previews from all folders where I did modifications. Then when I use Lr on my laptop, every now and then I still find some pictures with no updated preview (gray box instead of thumb and preview picture). I guess that these were pictures that I modified on my tower in develop mode without going back to library grid or loupe mode.
Could it be that (sometimes) the standard previews are not always being updated immediately when I modify a picture in develop mode? So that Lr sometimes "thinks" that the previews are still up-to-date even though they aren't?

The ACR cache should set itself (update) as you work with the files. I suspect however if you work on a machine where the cache files reside, but have the other data on a separate drive, on a separate machine, this *may* be why they don’t appear to update. If you save them to the external driver all the time, just move it from machine to machine, or back up (clone) this as well as the lrdata, catalog, and images, the updates will travel with you.

Similar Messages

I have added about 2000 cds to itunes without the song details. as i slowly update the song titles and genres etc in itunes, it does not always update the file in explorer. is there a solution to this? thanks.

i have added about 2000 cds to itunes without the song details. as i slowly update the song titles and genres etc in itunes,it does not always update the file in explorer.is there a solution to this? thanks.

Windows Explorer will display tag properties for mp3 & wma files, not aac (m4a) or wav. It is possible for mp3 files to contain multiple tags but only one will be displayed. Try inspecting the problem fils with a third party tag editor to see if you can tell what is going on. For mp3 files, provided all the details that you want the file to have are displayed in iTunes, you can try using the right-click option Convert ID3 Tag > None a few times followed by Convert ID3 Tag > ID3v2.3 which may well help.
tt2

Updates all the photos (cameraroll) in iCloud or is it just photo stream when you sync? I have 5000 photos in the camera but only 800 in the stream and I would like to save them all. How to do?

updates all the photos (cameraroll) in iCloud or is it just photo stream when you sync? I have 5000 photos in the camera but only 800 in the stream and I would like to save them all. How to do?

Plug your iPhone into your Mac and open iPhoto. Transfer the photos from the phone to your Mac.

Why do my calendars not always update 9or update right away?)

I am not sure i am following APPLE's instructions correctly as I don't get consistent results. Can someone help? Thanks.
I have the newest IPOD TOUCH. And some things I have entered on my MACs and even work PCs (me.com calendars eventually showed up on my ipod touch. Vice versa too.) Problem is that this is not consistent. I occasionally find something does not make it, especially from internet (me.com) to the IPOD.
I THINK my IPOD TOUCH settings may be the problem.
They are
PUSH--> ON
FETCH --> MANUAL
I have tried other ways, and the results are always unclear. I thought to save the battery PUSH should be off, or is it only FETCH?
I have wifi on AT HOME. But only to get mail sent to my IPOD. Out on the street and at work there IS no wifi. But anyway, on or off, it seems like I need to have my usb connector plugged in to sync. So I do that too.
SO, Calendar--> PUSH ON OR OFF? FETCH ON OR OFF? WIFI ON OR OFF?
Now Push on, wifi on.
MAC settings too are confusing. There is SYSTEM PREFERENCES and Itunes.
Here they are for my PPC G5 running 10.5.5 and Intel Macbook Pro running 10.4.4)
MOBILE ME (SYSTEM PREFERENCES)
Sync (all items checked except, on the desktop, the mysteriously named "com.panic.transmit.favorites". So that includes calendars. And set for AUTOMATICALLY.
NOTE!!
---> THIS ONE ---WAS-- SET FOR AUTO, BUT JUST NOW I SWITCHED TO MANUAL AND IT DID WORK!!
-> DOES THIS MEAN I FOUND THE SOLUTION? OR A FLUKE???
ADVANCED shows the two machines being synced
ITUNES SETTING
Contacts and Calendars are synced "OVER THE AIR" from Mobile ME. That implies wifi? But regardless, with or without, plugged in or not, I do not always get things synced.
Mail account--only have me.com. before I had the other email I use, but it seemed to create multiple instances of Mobile me on my IPOD and also multiple calendars "On my Ipod" and UNTITLED Account" So now I leave only mobile,me checked. (see below ADVANCED)
Advanced:
REPLACE INFO ON THIS IPOD.... Or, THIS may have been the culprit, so now I leave this off
So, now I am left wondering if any of my settings are less than desired. And is the syncing, when it happens, occurring over wifi or over the USB? So far, the one setting that seems to MAYBE make a difference is in SYSTEM preferences-->changing to SYCH WITH MOBILE ME MANUAL (whereas before it was AUTO).
Thanks

tokyoprogressive wrote:
Thank very much for your answer. Let me see if I understand.
I have Mobile Me (this mac account and a set of calendars: home and work)
Fairly similar to my set up.
Ok...I have PUSH ON and FETCH MANUAL. But then in ADVANCED it says MOBILE ME CONTACTS AND CALENDARS --> PUSH. And MAIL also PUSH.
Though I am not sure what this actually means. So far, I seem to get things to happen
Rule 555: if it ain't broke, don't fix it.
Stuff from Mobile Me comes down automatically. That was supposed to be Push (instant), but Apple had to admit that in reality for now, there is going to be some delay. Even so, if I time it well, mail and calendar changes arrive elsewhere as soon as I make them on the computer or the touch or even the cloud.
Some apps do not support Push, so that Manual (or the times) cover that situation.
automatically IF I have wifi on at home and the calendar app is open. In other words, do PUSH And FETCH settings work if using USB and NO WIFI (on my home computer?)
No. By selecting the Mobile Me method, the USB syncs are closed off.
This works with wifi if you have Mobile Me (but then subscribed calendars do not sync).
Ok.
You mean other things sync but not calendars? I am not sure how I actually subscribe them. I just see the same info now on the web and on my TOUCH.
Your ordinary calendars do, but those you subscribe to (for example I subscribe to a calendar that I found on a website that gives me Formula 1 schedule; and my boss at work gives me a calendar I subscribe to). My basic calendars are fine, but the subscribed calendars do not even appear in Mobile Me or on the touch.
Hm. So far with that specific computer I can ONLY get wifi and not USB. You said I can turn it off??? You mean by turing PUSH to off? So PUSH off, no sync. Push on, sync.
Right. The Sync would be via USB, but that only syncs the touch and the computer, the computer would also sync with the cloud. OK, if you only have one computer, I guess. Syncs from the touch wait until you come home and plug it in.
So turning on MOBILE ME (PUSH???) makes SYNC via USB stop working?
That is right. If you look in the information panel in iTunes when you have the touch connected, that is what is indicated.
Thanks you. As you see, I am still very foggy about this all. It seems like the USB is good for charging and Itunes stuff, but that the calendar only syncs with PUSH on and FETCH set to, so far for me, MANUAL.
You have that about right, Yes.
And yet on some of its pages Apple says you should turn off PUSH and/or FETCH to save battery life.
Right. If you are in a situation where Push is not going to work for a few hours (like on a plane, or in the middle of a desert) it makes no sense to discharge a battery unnecessarily. If you are in and out of Starbucks in the US, or somewhere that has wifi on that you can link to -- and you do update a lot, or read email -- then keep it on.
Glad to have been of help.
Graham

JList bug, not always updates its UI

I am using JList with a vector containing the data. (have call setListData() for the vector). when i add an element in the vector and call updateUI() method of JList, it updates its UI but not always. 20% of the time it fails to do so. Any Solution?

Yeah, I have called repaint(), but the result is the same.
repaint() does not work either. I have tried so many methods.
like show() hide() repaint() invalidate() etc. etc. and much more but no one is working.
Asim...

Data Load Wizard not Inserting/Updating all rows

Hello,
I am able to run through the whole Data Load Wizard without any problems. It reports that it successfully inserted/updated all the rows, but when I look in the table, I find a few rows that were not updated correctly. Of the entries I've identified that don't get inserted/updated properly, I've noticed they are the same rows that I was having issues with earlier. The issue was a number format error, which I solved by providing an explicit number format.
Is it possible that the false inserts/updates might still be tied to the number format, or are there other reasons why the data load is failing on only some rows.
Thanks,
Brian
Edited by: 881159 on Mar 14, 2012 5:05 PM

Hi Brian,
I am not aware of the situation where you get false results. However, there were some issues with number/date formats that sometime were not properly parsed, and this has been fixed in 4.1.1 patch. would your case be different from the one described in bug 13656397, I will be happy to get more details so that I can take a look at what is going on.
Regards,
Patrick

New photos update all my photos are gone

after my macbook updated to the new photos all my photos were gone

This looks like Photos opened a new, empty library, because it could not access your iPhoto Library or Aperture Library.
Where are you storing your iPhoto Library? In the default location in the Pictures folder or on an external drive?
For Photos to be able to open your iPhoto Library, the library needs to be on a drive formatted MacOS Extended, and directly connected. It will not be able to open the library on a NAS or any network volume.

Syncing a moved folder is not bringing back all the photos to Lightroom

I have moved and renamed a folder in the external harddrive. Syncing that moved folder in lightroom is not working in bringing back all the photos to Lightroom - Although all the photos exist in that folder as I have confirmed through windows explorer.
Another Option: If I choose "import photos to this folder option" in LR and browse to the source to that folder - the missing photos are shown as shaded back and the import button (bottom right corner) is not highlighted. Therefore I cannot select these missing photos and hence cannot import them to the folder.
PLEASE ADVISE!

In the Folders Panel, the original folder should be listed with a "?" mark, because Lightroom can no longer find it. Right-click on it, select "Find Missing Folder", then browse to and select the renamed folder in its new location.
Note....these type of problems will continue to happen if you continue to rename and/or move folders or files outside of Lightroom. Do it using Lightroom and no such problems will arise.

HI, I have a Canon Pixma MG5250 printer and it doesn't seem to recognize iPhoto. All my photos are in iPhoto but I can't access them when the printer's 'photo print' box comes up. Any suggestions? thanks

Hi,
I have a Mac OS X version 10.5.8
I now have a Canon Pixma Printer MG 5250 and it doesn't seem to recognize iPhoto, where all my folders of photos are in the computer.
All other aspects of the printer such as scanning and printing documents are working. When I open the printer's
'photo print' box on my Mac, it cannot access iPhoto.
I would really appreciate any feedback and suggestions as to what to do.
thanks.

If you want to print a photo that's in your library you should do so from iPhoto. Select the photo, crop to the size you want to print and type Command+P to start the print process. In the Print window select the paper size and print size, printer and then click on the Print button.
OT

Images not importing? All past photos are gone.

For some reason, I cant import any photos to my external hard drive. When I try to, it loads so slowly and when the photos start showing up, I get an error saying that "Lightroom has encountered problems reading this photo."
I can import directly to my computer's (PC) C drive just fine and the external has a little over 100 GB's available. The day before this happened, I imported photos just fine. Whats even weirder is that ALL my photos in Lightroom "cannot be found".
Can anyone tell me what the heck is going on??

"Lightroom has encountered problems reading this photo."
This usually means that the photo is corrupted. The most likely culprits are a bad camera card or bad card reader, but any piece of hardware (hard disk, memory, USB cable, USB port) can be the cause.
ALL my photos in Lightroom "cannot be found".
This means that you have moved or renamed or delete the photos (or the folders that contain them) outside of Lightroom. To fix the problem, see: Adobe Lightroom - Find moved or missing files and folders

DNS records not always updating / up to date / correct

Hi
We have a local domain with a primary DC running Windows Server 2008 R2 along with DHCP and DNS (AD integrated), and a secondary backup DC running Windows Server 2008 (non-R2), however it has been off for a very long time due to malfunctioning
hardware. We also have another domain on the same LAN in a different forest altogether which has a trust set up between these two domains. This other domain has a Windows Server 2008 R2 as the primary DC and utilizes the first mentioned DC for DHCP
as well. The LAN has physical Ethernet connectivity and WiFi as there are mostly laptops as workstations. DCHP leases are set to 24 hours and DNS Aging and Savaging is configured for both domains.
I have been troubled by an issue for some time now where in some cases there is a mismatch with the IP a laptop has and what DNS has captured. I tried to reproduce the issue but I am unable to do so: I would connect a laptop via cable, then switch
to WiFi and then back again, each time DNS gets updated accordingly. I have tried the same tests with both connected simultaneously while switching between them as well.
What is curious is that I experience this intermitted issue in both DNS forward lookup zones for the respective domains. Keep in mind as I said previously that these are completely separate domains from different forests with a trust
configured between them. Other than the trust which they have in common, the DHCP is also in common which makes me suspect the issue is related to it. I have configured the IPv4 DCHP setting: "Always dynamically update DNS A and PTR records"
and ensured credentials were set which will be used to register and update records on behalf of clients.
This issue is causing problems with internet access through our hardware firewall as the sessions are dependant on the accuracy of DNS. Please, could anyone try and assist me. Thank you in advance.

I have made an interesting discovery. At one point yesterday client was connected to both cable and wifi which means DCHP had 2 leases for each adapter respectively. Later in the day wifi was completely turned off though a physical toggle switch on the
machine and only plugged in via cable. Further in the day I had the user complain that there is no internet connectivity (remember I said our firewall is dependant on the DNS' accurancy). Upon inspection I found that DNS had the IP of the wifi adapter and
not the one from cable, yet the wifi adapter is turned off completely for a couple of hours. I ran ipconfig /registerdns which corrected the A record, however only for about an hour after which the wifi IP overwrote the record again. I ended up deleting
the wifi adapter's DHCP lease late in the afternoon after which we all left for the day not too long thereafter. In the morning I had the same complaint of no internet access to again find that the cable IP is not reflecting in DNS for the client's A record
and now found a completely new IP which it did not have before, yet according to DCHP, the MAC address matched the wifi adapter. When I checked, the wifi adapter was still completely off. Somehow someway the record keeps on being overwritten by something (suspect
DHCP), even if the other adapter is completely turned off?!

Bug - Application Search will not always search all applications

Hello,
I noticed that when you first log into a workspace and go to the Application Builder, the search utility at the top will work across all applications. However, if you select an application it seems to "lock" that application in place, even if you return back to the Application Builder level and search from there. You have to log out and back in to search all applications in the workspace.
Regards,
Dan
Blog: http://DanielMcGhan.us/
Work: http://SkillBuilders.com/apex/

hi baltwo,
I checked the Spotlight Preferences and there is no choice for System Folders, or System Files, only for System Preferences.
When I do a Command F to open the search box, I can add criteria to include a specific word in the current search, which would include System Files, at which point the smallimage.plist file mentioned above does indeed appear in the found items.
However, when I close the current search box, and perform a new search, the System Files criteria is no longer a defaulted one. I can pick it any time, but I would always like my Mac to automatically look for all files that have "smallimage" in the file name.
Does anyone know how I can achieve that?
Many thanks...
ms

Preview in Finder not loading. All my images have the Preview icon instead!

Hi,
anybody experiencing the same problem as me?
All of a sudden my preview in finder doesn't work and all my picture preview icons became the "Preview" icon itself!
Here is how it looks like.. : http://img146.imageshack.us/img146/3414/picture37.png
Does anybody know how to get it back to normal because it is such a hassle to click on every single photo to find the picture that I want!
Thanks!

Sounds like your LaunchServices database has gotten corrupted. Launch the Terminal app in /Applications/Utilities/, copy & paste this one-line command into it, hit the return key, and restart.
*/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user*
That should fix the problem.

AR Invoice not always updated

Hi guys I have a small problem. I am trying to update values in user defined fields in some open AR Invoices. Here is my code:
oInvoice.GetByKey(inv);
oInvoice.UserFields.Fields.Item("U_RFMPayFlag").Value = f;
oInvoice.Update();
I do this for all the open invoices. It works on all the invoices apart from the invoices that belong to a specific customer. In other words all the invoices get updated apart from the ones that belong to customer "X". Does anyone know why those invoices give an error?
The error message is "OINV.DocCur, 'Field cannot be updated (ODBC - 1029)'"
Thanks
Edited by: Costas Ioannou on Jun 11, 2009 10:02 AM
Edited by: Costas Ioannou on Jun 11, 2009 10:03 AM

hi,
Answered in this thread,
Cannot update user define field
Jeyakanthan

Photo stream is not updating all iPhone photos

I just set up my photo stream to be able to download all of my photo's taken with my iPhone into Aperture. For some reason it's only going back but so far. I only have 30ish of the 230 photo's on my iPhone. I stopped photo stream and restarted, but it didn't seam to do any good.
Also, if it only does it over Wi-Fi. Does the wifi on my phone stay on when it is locked?

WOW! That font is difficult to read. But, see if this support document helps you http://support.apple.com/kb/TS3989. Photos stream is based on date and photos more than 30 days old are removed. Photostream is designed as a temporary storage to allow you to download the photos to the computer.

Render previews seems to not always update all modified photos

Similar Messages

Maybe you are looking for