Render problem - strange glitches after rendering in new PP 2014.1

Hi there,
I've updated my Adobe Premiere Pro CC 2014 to 2014.1 and since then all my renders have strange glitches.
Both old (converted) and new projects. It's second day I can't render any usefull file. I've deleted media cache, tried not using any plugins nor effects at all and yet, it still doesn't work properly.

I've found, that happens only when I use lumetri looks in the sequence.
Any idea how to fix this?

Similar Messages

Getting Weird Glitches After Rendering

I'm doing a big project with a lot of Motion files that we render in FCP. I had to have them as motion files versus QT because... long story, but after much trial and error it was the best solution.
Maybe a ten to twenty percent of the time, when I render these bits of the sequence, they get weird glitches. Sometimes lines across the non-alpha section of the motion file. Sometimes flashes of color across part of the video. When I simple copy the clip, delete the bad one, drop the copy in, and then rerender, it works fine. We were rendering to an external eSata drive. We're now rendering to an internal eSata drive-- just to see if that makes a difference.
Anybody ever seen this problem before?
Thank you,
Alex

NTSC, started as Digibeta. The Motion files however were created from image sequences that were starting as PAL. We converted them and have had good results, except for this 10-20% with glitches on rendering.
Thank you,
Alex

Weird glitches after rendering

Dear people,
I did recently huge (for me) step from PRE 3.0 to PRE 8.0 (I hadn't know, there were 9 Version). Anyway, I had in my first video some weird artefacts after rendering my video, and I don't know, how to fix them. (With 3.0 I hadn't such problems, even if I used it already ca. 3 years for many similiar projects).
You can see this glitch between 0:59-1:10 of my video in the upper right corner.
http://www.youtube.com/watch?v=pp40ZjZ_lQ8
I tried it with various configurations, but it had always just various glitches. The youtube video was directly uploaded from PRE, and its quality is much more better than the glitch-full videos I exported as files. Do I do something wrong?
To my PRE project: it contains a video and many animated text layers. In the PRE preview, before rendering, everything looks good, but the rendering disappoints me :-)
Actually I wanted submit my video to some art video galleries, but I cannot since it's still a little bit buggy.
I would highly appreciate any help!
Thank you, people, in advance,
Merzmensch

Well, perhaps this was one of some differences to my previous videos: I usually use my Sony camcorder, but this time I used my digicam Ricoh K8. The video to this camera is fully incompatible with PRE (even if it's an AVI - I worked with another cameras before, but only with Ricoh K8 I discover incompatibility to just every video cut software), so I converted it through VirtualDub (using also MSU Cartonizer for special effects). As far as I cam recall, I converted it with Helix YUV codec, which I often use, because PRE 3.0 hadn't compatibility problems before.
About settings of the project, which details do you need exactly? I actually used the default settings. Here I did the screenshots of every part of Project settings:
http://s234.photobucket.com/albums/ee240/kosmopol/PRE%20settings%20Takahashi/
(Sorry, it's German version, I hope they haven't shuffled the settings) :-)
I have a feeling, that the problem is not with video footage, but with some PRE settings, since you can see in the glitch both levels: video and text together. Perhaps rendering failure?

Premiere Elements 11 (Windows 64 bit): Frequent glitches after rendering

I am currently trying to render around 20 videos, around 12 hours in total duration (video lengths vary from 5 minutes to 105 minutes).
Unfortunately, about 50% of the time, when i watch a newly rendered video, there will be some sort of graphical glitch. For example, a clip will be missing from start to finish, replaced with a blank beige screen (definitely not in the timeline), or a random graphical glitch where some of the visuals become warped for a couple of a seconds.
Here is a screen shot of a glitch
And here is a screen shot of my render settings:
This is costing me a lot of time and effort.
Is there anything I can do to reduce the frequency of these errors, or scan videos for errors without having to watch them closely manually??
thanks.

I have an ATI/AMD FirePro v4800 1GB GDDR5 with the latest drivers for this card (8.982.8.3)
Is my video card not compatible?
this slow redraw of the timeline happened way before
and everytime a new driver version came up I had installed it but that didn't change anything.
Only with aero disabled I would enjoy a fast timeline scrolling in windows 7. (now, not possible in windows 8 pro)
Bill how can you explain this? Same video card and everytime with the SAME NEW drivers, aero on=slow timeline, aero off=fast timeline!
Is there some kind of a fix that we can always wait from our graphics card companies to include to new drivers??? (for how long???)
or maybe is it all up to Adobe and its own programme?
Are we all supposed to have old video display drivers?
Can someone make some kind of a poll for people who have this problem to vote to see where this problem apears, in which configurations, in which graphics cards? (assuming they have latest drivers)
so we all finally know what/where is the problem.
I love the premiere elements series and thats why I want this to be solved.

Problem with TimeCapsule after upgrading to new mac...

hi,
I bought a new UniBody MacBook just before Xmas, and turned off TimeMachine during the upgrade from my PowerPC G4. Since then, until now, I stupidly forgot to turn it back on. Now I did remember, it doesn't work! It tells me it it failed with the detail of the error message "The backup disk image could not be created." So I chose the TimeCapsule disk again, enter the password, the settings reset, force it to back up now, and AGAIN it fails...
My HD is bigger (232GB) than the free space on the TimeCapsule disk (178GB), can that be the issue? The used space of course is smaller (54GB).
Time Machine was THE reason I upgraded to Leopard, and right now, I'm stuck, so any help is appreciated.
Thanks,
Nadine

Thank you Mark,
I found out in parallel this was my problem: not only was the computer not named in "Sharing"
[go to Preferences - Sharing - add a name in the top field which is visible for all methods of sharing]
but it also didn't have a DHCP Client ID - adding that second name did the trick
[go to Preferences - Network - AirPort - Advanced - TCP/IP - add name with only alpha-numerical characters in the DHCP ID field, press ok.]
Now I have to decide when to delete the old backup which it doesn't seem to reuse... looks from other posts like that could be tricky.
Happy Backuping
Nadine

Color linies after rendering

Hi
I have a good video clip with a horisontal sharp transition from blue to red. Then i apply Motion to the clip ( Scale 110 % ) After that I render the clip.
After rendering there is a thin green linie in the transition from blue to red.
Anybody knows how to get rid of this green linie ?
The clip mentioned above is a test clip which i have made. When I use Motion to my clips there are green or red shadows in the color transitions.
Hope for a helping hand - thank you

It's your monitor, computer monitors can not be relied on for color accuracy.
Try setting RT to Unlimited.
Put all your animation on V2, put a Shape (Generators > Shapes > Square) on V1. Make the Square the size and color you want. Before editing it into the Sequence, in the Viewer window, top left, enter the duration you need. This will be more stable with coloring.

Strange problem after rendering!

Hi guys , could you help me please? my system is Premiere Pro CS3, Win Vista32, 2gb Ram , integrated ATI xpress 200m with 128mb (with the last drivers), core2duo 1.8.
My problem is the following: after importing an AVI 640x480 30fps clip shot with my sony digital camera t20, i add it to the timeline, i play it and it works fine but right after rendering it , it jumps and flick. It also plays fine with windows media player so i was wondering why !!?!??
Are my setting of the project correct? I used DV NTSC 48khz project, but dont think that is something about these settings right? could it be main settings of premiere? i also read that some people had problems using the same graphic card 200m with premiere and vista,could the problem be connected with it?
thanks in advance if you can help...

No. Sorry. I have seen video shot on the same camera at 24fps and at 30fps and the difference was barely detectable. Both scenes were lit the same and shot the same other than frame rate. If we slowed it down it was detectable. Once played on a 20' screen it was a lot more evident, however. When the footage took up my entire area of vision, then the stuttering of the slower frame rate was easier to see. But on a smaller screen, no.
The "video" look is caused by a lack of depth of field and a sharper contrast, both of which should be addressed during production, not post. Just slowing the frame rate just isn't enough to make it not look like video.

Strange problem after rendering reader extension

Pdf file is working well before rendering reader extension right. After reader extension right one page is automatically created double.
I cannot realize why the page become double. I was analysing with xfa debuger. All properties of page same but page2 is created double.
https://dl.dropbox.com/u/70850345/print/xfaDebuger.jpg
I also moved page 3 next to page1. Then page3 is created double after rendering reader extension right.
DO you know why this page is created double?

Hi,
there are several bugs in you form, which is really 'complicated'.
Most are allowed page breaks for subforms where you did not allow page breaks for the parent objects (the surrounding subforms or pages).
You also set several subforms flowable while the surrounding page are set positioned.
I fixed a few of the problems but not all as I had not the time.
The next thing I don't understand are the many masterpages which have almost the same content.
You'll need just one. All the rest can be placed on the body page(s).
In fact you also only need a single body page which is floating top-to-bottom and allows page breaks.
There you can place all the subforms you currently set as single pages.
https://acrobat.com/?d=pvrhlCnYZtnhkY8HAi7GwA

Sound problems after rendering

Hi,
Being that I have Premiere Pro 7.0, I am not too sure how much help I will get, but i was hoping that someone here could still help if all possible. Here is my problem. I thought I start practicing developing video lessons for 3d software. These lessons would be created using a screen captureing program, called camStudio. In my first lesson, my first try doing the entire lesson as one video, I found out that the video file size exceeded CamStudio's exporter file size allowance when trying to save out to Microsoft DV 1 AVI file. I then decided to split the lesson into 2, but final compose it as one video in Premiere Pro 7.0. Since the lesson was broken up into 2 screen captured videos, I thought it would make things easier if each screen captured video was in its own simulation. So, in other words, I have created 2 simulations in one project, and then I had nested both of them into the 3rd simulation. For example, simulation 1 was called lesson1 part a, and simulation 2 was named lesson1 part b, and the third simulation was called lesson1. Once I had everything setup, at first everything was working fine, meaing I could see the video and hear the sound tracks. However, after I choose to render the sequence using Microsoft DV11 AVI, I do not get any sound, and yet I made sure that the exporter exports both the video and audio. Furthermore, after rendering the project, going back to Premiere Pro's project, and pressing play, I get the error.... Disk Write Error: Verify drive connection, available disk space and disk access privileges
However, when I go inside simulation 1 or simulation 2, I still hear their sound tracks. One other thing I have noticed is that I get the sound back in the project if I move the orginal simulations into a new simulation. By doing that, I am then able to recover the project,. but if I choose to render again, the same process happens all over again.
Does anyone Have any ideas?
My Specs
Adobe Premiere Pro 7.0
Windows XP SP3
CPU 3.0GHz processor
RAM 512MB

so are you saying that the problem could be comming from how I did my recording with CamStudio? Not to change the subject, but you see, I am kind of lost. My goal is to provide some free video lessons. I was thinking my final encoded videos will be in DivX or XVid. CamStudio does offer users to compress to thise types of format. Howeveer, due to owning a very cheap microphone, those kinds that sit on your desktop, is causing me to have the biggest problem, since there is a good amount of background hissing noise in my recordings. So, I have been using both CamStudio for the screen capturing and Audacity to do the voice recording. Then in Audacity, I try my best of tuning up the voice and removing the background hissing noise. Once that is finished, I then need some sort of video editing software that allows me to put the video and my voice recodring together as well as splicing areas of the lesson where I stutter or slurr my speach a bit, which can be easily fixed in Adobe Premire Pro. However, my version of Premiere does not offer XVid or DivX encoding. I was thinking of using VirtualDub, but I really do not want to have 5 programs, just so that I can fix all of my problems, not to mention I have no $$$$ left. So is there a free better way?

Rendering problem, changes do not show up after rendering?

I am new to this and can not figure out why the end result after rendering only shows the "original" movie clip, none of the editing i have done are showing up? when i scrub through the composition everything works fine? I have tried both the ordinary render queue in AE and Adobe media encoder.

Yeah I think I got it right with the rendering queue, however I saw something now that may have something to do with the problem, my corrections is visible when I have "fast draft" chosen under the "fast previews" button, when i change to "off (final quality" the effect disappears? I thought the choices under that button just is what it says, for fast previews?
I attach the screenshots you where asking for.

Davinci resolve render problem with new Mac Pro

Hello,
we are having strange glitching effects (as shown in attachments) while exporting from DaVinci Resolve.
The project is in 4K.
Maybe it is related to an heating issue? We have seen that it doesn’t manifests if we divide the exporting process into smaller chunks (single shots) but if we export the project all together after a while it comes up (like if it is correlated to the temperature of the graphic card).
Details:
Mac Pro (late 2013)
2,7 GHz 12-Core Intel Xeon E5
64 GB 1866 MHz DDR3 ECC
2xAMD FirePro D700 6144 MB
OS X Yosemite 10.10.1 (but it also appeared with 10.9)
DaVinci Resolve 11.1.1.006
What should we do?
Thanks.

I'm experiencing the same issue and to say that I'm FURIOUS is an EUPHEMISM!
This nightmare all started October 15th when I decide to make me a present and make my life easier upgrading my coloring gear with the "most powerful mac desktop" on the market.
After spending almost 11K not only I wasted time and money and lost clients but all this is still not over at today's date after a 3rd MAC PRO desktop replacement and after going through apple care to have my 2 D700 and logic board replaced on the last one!!!
Hours and hours of driving to the store, order a new replacement, wait days, reinstall drivers and softwares, render tests etc etc!!!
After hearing from the apple "genius" it definitely looks cool! there are people out there that make transparent enclosures!
It could look like an hairy armpit for what I care, I just want a machine that works for god sake!
Shame on you Apple! Shame on you Blackmagic! Advertising this machine and your software as the best combination out there for color grading!
FIX IT NOW!
same configuration of NtNext
Mac Pro (late 2013)
2,7 GHz 12-Core Intel Xeon E5
1TB SSD
64 GB 1866 MHz DDR3 ECC
2xAMD FirePro D700 6144 MB
OS X Yosemite 10.10.1 (but it also appeared with 10.9)
DaVinci Resolve 11.1.1.006
Pegasus R2 32TB

GLITCHES WHEN RENDERING AFTER EFFECTS MOVIES

FORUM,
I have a dual 1gig MDD with 1.5 GIGs ram, last year had a major system meltdown and replaced my mobo and processor cards. Everything has been ok (minor freezes now and again) and I installed a Radeon 9800 pro mac edition ( a few months ago). Since about then, everytime I render a movie in after effects pro 6.5, I get random dropouts in some frames. Anybody having a problem with this type of thing?

Random dropouts could be due to not having enough RAM. anytime AE is performing a Render it uses all the Free RAM it can get ahold of. If your Mac does not have enough Free RAM you can encounter hics burps and dropped frames in all sorts of rendering whethere it is with a video app, a compositing app, or even burning DVD's.
One good bit of advice is to clean out your OSX system caches anytime you go do to a render. make sure nothing else is running in the foreground or background other than OSX and AE. even go as far as taking your Mac off any Network it may be connected too such as an internal LAN or the broadband LAN.
A good freeware utiltiy I use before I do renders for my 3D Animation projects, is called Yasu 2.0
http://www.versiontracker.com/dyn/moreinfo/macosx/21674. It allows you to run various common CRON scripts as well as allow you to empty various system caches and frees up much needed RAM for your processes.
If you still have issues with your rendering then I highly advise get more RAM if you can.
you list your Mac as a Dual 1gig MDD. MDD models can take up to 2GB RAM using 4x 512MB PC2700 DDR333 SDRAM DIMM's. PC2700 RAM is not too pricey now and every little bit of RAM will make your apps run faster, especially when you have to Render in AE.

Audio problem after rendering!

Hi everyone! I am having a problem with sound in my project after rendering. I am using Adobe Premiere CS2 , and in Audio track 1, I have someone speaking, and in track 2 I have backround music. When I play it back in the window, together it sounds perfect. After rendering, the voice becomes very crackly and distorted. I have tried rendering just the voice without the backround music, and it sounds perfect. It seems the addition of backround music is causing the distortion to the other track. I have tried rendering the backround music seperately and adding it in, but still the problem persists. I adjust the music so that when the kids are talking, the music dips down, and when they are not, I leave it at it's normal level. HELP..I am losing my grip on this one! Thanks so much....Tammy

Tammy,
If we've dropped a bit of time for this part of the edit, you now have time for more fun aspects of it.
While I will casually monitor my Meters, I spend much more time with a good set of noise-canceling headphones, listening critically. The Meters are basically to point up potential issues. With Audio, if you have not invested in a really good set of headphones, do yourself a big favor, and sneak 'em into the budget.
Glad that you got things toned down.
Now, let's go on to Lesson 02 - The Audio Mixer. Unlike adding Keyframes to a Clip, when your cutting is done, you can apply Track Keyframes to attenuate (also Pan, etc.) you Audio Tracks to suit. One would just change the Send in that Track to Write, or Touch, and "ride the gain" with the slider, as is required. I probably do most of my Audio editing there, than addressing the individual Clips. First thing that I have done is cut back a bit on the frequency of the Track Keyframes in Edit>Preferences, as I find the default to add too many (and you can go in and adjust these by hand, if you need to "smooth" things out a bit.). One caution: do this when you are satisfied with the cuts, Clip placement, etc., as these Keyframes are applied to the Track. If you were to remove a Clip, and replace it, those Keyframes would apply to that new Clip, whether you want them to, or not. This trips some folk up, if they do the Audio Mixer thing too soon in the editing. Wait until you are "in love" with your Timeline otherwise. It's like scoring a Project. One does that as about the very last step, or much work will be repeated, and that is not fun.
Good luck,
Hunt

Picturesize problem after Rendering a timeline in Premiere Pro CS4

Hello,
I currently work with 4.1.0 and have the following problem. When I import Tif sequenze 1280x720 as film, first the film looks correct. The red line above in the timeline says that the sequence is not rendered. When I render now this timeline by pressing the Enter-key, after rendering the content looks zoomed in the preview and on an output monitor the picturesize shrink to approx. 70 %. But there is no effect on this track. This happens simply with original tif files. When I use JPEG files the problem does not exists. So I presume a problem when processing tif files. Do you know problem like this?
Thanks for an answer
André

André,
What are your Project/Sequence Presets?
Is Scale to Frame off, or on?
Good luck,
Hunt

After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

Render problem - strange glitches after rendering in new PP 2014.1

Similar Messages

Maybe you are looking for