Rendering forms and guides in Rails or Grails

Hi there,
I've found documentation that explains how to render ES2 forms using a Java servlet, however I'd ideally prefer to integrate forms into a JRuby on Rails or Grails application. Would anyone happen to know if this is achievable?
Many thanks!

LiveCycle has a Java API and an ActionScript API. LiveCycle services and applications can be called from .Net clients via SOAP, also. ES introduced REST endpoints on most services and all applications. You could call the LiveCycle Forms service from JRuby using NET::HTTP.
Steve

Similar Messages

  • Rendering PDF form and invoking the process

    I've seen few recent posts about rendering the form from .NET application and I was wondering if you could explain and give few more details about how to create an .NET application which will render the form with LC Forms and then invoke the process.
    If you have any kind of other documentation please tell me about it...
    I was reading SDK help and few livedocs, but since I do not have experience with .NET it is all a little bit confusing for me.
    Once I render the PDF in my application how do I invoke the process? Is the submit button on the form enough or I have to write an a web service?

    What did the errors say? Can you post a copy of the pdf so we can test out. The presets embed the font, but might be a unicode issue, or one of the few fonts which are copyrighted and do not allow embedding.
    What application was the pdf was created from, what settings were used, and if you can outline the fonts. What font or font(s) are the ones reflowing?

  • How to Install the Forms and Reports 6i in Ubuntu 6.06 LTS

    Dear All,
    I need to install Forms and Reports 6i in Ubuntu 6.06 LTS.
    I had downloaded the d2k6irelease2.tar also and extracted the tar file.
    I don't know how to start up with the installation further., Is there any document available for the installation process inubuntu.. or what are the steps that i need to follow to make it work..?
    Many thanks in advance...

    Hi,
    Here's the Forms and Reports Services Deployment Guide for OAS 10g 10.1.2:
    http://download-east.oracle.com/docs/cd/B14099_11/web.1012/b14032/toc.htm
    You will need to modify your default.env to point to the directory where your .fmx is located and formsweb.cfg to run the specific form, e.g. foo.fmx (default is test.fmx).
    HTH,
    Jim

  • Dynamic Forms and WF

    Hello,
    I have designed a dynamic form, where user can add rows dynamically by clicking a button on the form, the form is working fine in preview in designer.
    this form is initiating a LC WF process, but, if I deploy this form to form manager as an XDP and choose to render it to PDF, adding rows function does not work, however if I save this as dynamic PDF from LC designer and deploy it again to form manager, it works !!
    However, I can not use PDF generated from LC Designer since I found that commenting and annotations are not working ( I am using acrobat ) which is an important feature, also, web services calls are not working even, again from Acrobat!
    How can I set the form server installed with workflow server to render XDP templates into dynamic PDF forms ?
    Or alternatively how to enable commenting and fix web service calls in PDF rendered form ?
    Thank you for help,
    Greetings,

    By default Forms and Form Manager are configured to render a PDF as either static or dynamic based on some values in the XDP. By default those values will tell it to render a static PDF. What you can do, in Designer save as a dynamic PDF, then open the dynamic PDF in Designer and save as an XDP. Upload that XDP to Form Manager, the tags will be present to tell it to be rendered as a dynamic PDF. There's a better way if you are using Designer 7.1 and Forms 7.1, but since I don't know your environment this is a way that will work regardless of versions.
    Annotations will not work in dynamic PDF's though. Currently annotations make no sense in dyanmic PDF's since the template of the PDF can dynamically change while annotations are bound to a specific location. IE: You have a dynamic PDF that is initial 4 pages and add an annotation to page 4. Later the template of the PDF changes based on data and user interaction and it is now a 2 page PDF, but the annotation is still on page 4 which no longer exists...
    Chris
    Adobe Enterprise Developer Support

  • Forms and Reports: Automated Test tools - functionality AND performance

    All,
    I'm looking to get a few leads on an automated test tools that may be used to validate Oracle forms and reports (see my software configuration below). I'm looking for tools that can automate both functional tests and performance. By this I mean;
    Functional Testing:
    * Use of shortcut keys
    * Navigation between fields
    * Screen organisation (filed locations)
    * Exercise forms validation (bad input values)
    * Provide values to forms and simulate user commit, and go and verify database state is as expected
    Performance Testing:
    * carry out tests for fixed user load
    * carry out tests for scaled step increase in user load
    * automated collection of log files and metrics during test
    So far I have:
    http://www.neotys.com/
    Thanks in advance for your response.
    Mathew Butler
    Configuration:
    Red Hat Enterprise Linux x86-64 architecture v4.5 64 bit
    Oracle Application Server 10.1.2.0.2 ( with patch 10.1.2.3 )
    Oracle Developer Suite (Oracle Forms and Reports) V10.1.2.0.2 ( with patch 10.1.2.3 )
    Oracle JInitiator 1.3.1.17 or later
    Microsoft Internet Explorer 6

    are there any tools for doing this activity like oracle recommended tools?
    Your question is unclear.  As IK mentioned, the only tool you need is a new version of Oracle Forms/Reports.  Open your v10 modules in a v11 Builder and select Save.  You now have a v11 module.  Doing a "Compile All PL/SQL" before saving is a good idea, but not required.  The Builders and utilites provided with the version 11 installation are the only supported tools for upgrading your application.  If you are trying to do the conversion of many Forms files in a scripted manner, you can use the Forms compiler in a script.  Generating new "X" files will also update the source modules (fmb, mmb, pll).  See MyOracleSupport Note 955143.1
    Also included in the installation in the Forms Migration Assistant.  Although it is more useful to people coming from older versions, it can also be used to move from v10 to 11.  It allows you to select more than one file at a time.  Documentation for this utility can be found in the Forms Upgrade Guide.
    Using the Oracle Forms Migration Assistant

  • I need to create a fillable form and then generate a reports.

    Hello everybody. I need to create a fillable form and then generate a report using numbers. You know, for example if you have customers, I need to be able to write the usual , name, last name, address, and some other details and then using a standard letter I would like the form to be able to populate these fields automatically in a standard pre formatted letter by our company and then be able to print it.
    Any help to point me in the right direction I would appretiate very much.
    I have iwork 9 installed in my macbook pro

    This is acalled a mail merge and is solved using a combination of Numbers (or address book) and Pages.  To get detailed help how to performa a mail merge start in Pages, then in the help menu type Mail Merge:
    Also download the help files for Numbers and Pages here:
    http://support.apple.com/manuals/#
    Page 247 in the Pages User's Guide has details how to perform a a mail merge.
    Post back with specific questions if you need to.
    Regards,
    Wayne

  • Deploying Forms and Reports 6i runtime with my application

    I'm trying (for a year or two) to find out Oracle's recommended and proven method of packaging Forms and Reports 6i runtime components with my application. I've tried the 6.0 File Packager, the Project Builder Delivery Wizard, and the Oracle Software Packager. I'm still working with OSP but their doesn't seem any mention of runtime inclusion the User Guide or Tool. This is a basic need for anyone doing mass deployment on client/server environments. I know someone at Oracle knows the answer. Please help me! I'm desperate! Also, please realize that a custom install of runtimes from the Developer disks is not an option in our scenario.

    I had the same problem.
    I resolve with a new third party tool:
    RunDev
    I've found it on:
    solutionmarketplace.oracle.com
    searching "rundev".
    James

  • How to deploy existing forms and reports on the web

    Hi Guys,
    I have 6i forms and reports within our environment, and we are running client/server architecture, by installing forms and reports runtime on each client PC's. We would like to get rid of this by deploying forms and reports on the web, without zero coding. Can any one suggest and guide me through the process with proper security mechanism enabled along with.
    Thanks in advance,
    Aji

    Thanks for the update,
    We have a develpment 10g AS environment setup made,
    1) But we are really confused how to present the forms and reports.
    We have around 250 forms and reports running on client/server architecture. All these forms/reports have been copied to a fileshare and access control is restricted by folder security.
    2) How to deploy forms - entries within formsweb.cfg with Named Configuration sections.
    3) How to deploy reports, as to were to copy the .rep files.
    getting the following error
    REP-110: Unable to open file 'Car_Readings.rep'.
    while trying
    http://kddsvr6.kddc.com:7778/reports/rwservlet?report=Car_Readings.rep&userid=username/passwd@db&desformat=htmlcss
    Thanks in advance,
    AJi

  • How to install My forms and reports in IAS?

    Hi Gurus,
    I installed database 10g,IAS10g,forms and reports10g separately.
    now i want to configure my forms and reports in IAS 10g.i can run the form from
    formbuilder after started the oc4j.but i am not able to run in ias .
    anybody know the link" how to configure forms and reports in ias " just
    forward to me.
    Regards
    Gopinath M

    Hi,
    Here's the Forms and Reports Services Deployment Guide for OAS 10g 10.1.2:
    http://download-east.oracle.com/docs/cd/B14099_11/web.1012/b14032/toc.htm
    You will need to modify your default.env to point to the directory where your .fmx is located and formsweb.cfg to run the specific form, e.g. foo.fmx (default is test.fmx).
    HTH,
    Jim

  • Install Oracle Fusion Middleware Forms and Reports Services 11g

    Hi,
    I m looking for the installation steps for the oracle fusion middleware 11g forms and reports services only, on the Windows server 2003
    Can anyone help me to download and install the OFM.
    Thanks

    Hello,
    Here you have the installation guide for Forms&Reports11gR2:
    http://docs.oracle.com/cd/E24269_01/doc.11120/e23960/install.htm
    and if you want to download it you can download it from here:
    http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html
    Hope it helps you :)
    Regards
    Carlos

  • Query on install Oracle AS Forms and Reports Services

    Hi All,
    I want to install 'Oracle Internet Application Server Products - Forms and Reports', I referenced the 'Forms and Reports Services Installation Guides 10g Release 2(10.1.2) for Windows B16392-02'.
    I install successfully up to Chapter 5.
    When I jump into Chapter 6 of the release (Configuring Forms and Reports Services to Use an Oracle Application Server Infrastructure), I followed the guideline but could not see my AS has any way to allow me to configure Oracle Identity Management/OracleAS Metadata Repository/Starting OPMN Services/Testing the Configuration.... Is it because my AS is just for Forms and Reports and not a full feature one? How I can test my AS is working?
    On the other hand, is it possible to migrate forms and reports from old version like Developer 2000 4.5 to 10g? Any reference or suggestion?
    And what I need to do more with the current AS in order to allow me to upload forms and reports to it? Please kindly advise.
    Best Regards
    AC

    Hi AC!
    There are two versions of Forms and Reports: one standalone and one as part of the Application Server. The second one will offer the Infrastructure. If you use the second one then you will have an Infrastructure after the installation.
    Seems to me that you do not have the complete AS but the standalone version.
    cu
    Andreas

  • Installation : Application Server 10g forms and reports services

    Can anyone tell me if the infrastructure database is required when doing the forms and reports services only install to get the Distributed Configuration Management functionallity to work. There is no indication in the installation documentation that this is a requirement, in fact it seems that it is not required at all. I am having to guide a service provider through an install remotely and have to give them alot of information before they will proceed.

    Hi Sandeep,
    Hope you will be fine.
    Actually I have installed Oracle DB10gR2+RHAS3 on one machine and Oracle AS10gR2 Forms and Reports Services+RHAS3 on another machine.
    1). I can manually start the database EM,isqlplus manaually after OS reboots using commands and they are working fine but donot know how to start all these automatically when the OS starts.
    2). I cannot start the IAS Forms and Reports Services neither manually nor automatic. even when my home directory was /BIN, i executed the command
    "emctl start iasconsole" it returns an error Like "BASH.........etc"
    meaing Linux does not recognize emctl while it is still existing in ORACLE_HOME/BIN directory.
    I want both (DB and AS) working fine automatically while OS starts.
    Looking Forward.
    Aamer Javaid

  • Oracle Application Server 10g Forms and Reports Services

    Hi there,
    I want to install Oracle Application Server 10g Forms and Reports Services. What must I download? The installation guide says that "Oracle Application Server 10g (9.0.4) Forms and Reports Services allows you to install and configure Forms and Reports Services without the need to install and configure all of Oracle Application Server 10g (9.0.4)" but it does not clearly state what exactly to download.
    Oracle Application Server 10g Release 2 (10.1.2.0.2)
    [http://www.oracle.com/technology/software/products/ias/htdocs/101202.html]
    or
    Oracle Developer Suite 10g (10.1.2.0.2)
    [http://www.oracle.com/technology/software/products/ids/htdocs/101202winsoft.html]
    Faoilean.

    You might find better assistance in the APplication Server forum - Oracle Application Server - General

  • Installing Oracle 10g Forms and Reports in Cluster Mode

    Dear All,
    My OS version is RHEL 4
    In our current setup we have oracle 10g database two node  cluster and Application Server 10g to node cluster.
    Currently our report server has been configured to run in standalone mode
    I have been asked to configure oracle 10g forms and report server in cluster mode.
    Please provide me with the documentation link to configure oracle 10g reports server in cluster mode.
    Thanks and Regards
    Monoj Das

    my main goal is load balancing only
    Then what I've done in 2007 might be what you need. In that thread there is a link to Web Cache Administrator's Guide : there you'll find everything you need to configure the web cache as a load balancer, particularly chapter 8 Setup and Configuration.
    Anyway, here briefly some configurations : we have two machines, say MachineA and MachineB. The DNS resolves MachineA to a virtual address, which is normally assigned to MachineA; if MachineA crashes, it gets assigned to MachineB.
    Users URL looks like this : http://MachineA:<port>/forms/frmservlet?config=<some config>
    MachineA's web cache distributes connection requests between MachineA and MachineB.
    Of course we're now using 11g as well, but that's another thing.

  • Can install APEX in OAS Forms and Reports Services?

    Hi, I need to know: Can install APEX in OAS Forms & Reports?, thanks a lot....

    Hi,
    1. OAS Forms and Repors Services run on Oracle HTTP Server (OHS). You can use OHS to connect to Apex
    2. Apex is not installed in the OS, its installed inthe Oracle Database. In other words, you install is by connecting to sqlplus as sys as sysdba
    3. Install Apex in the instance that is holding the tables and views that are being used in the Oracle Forms/Reports.
    Hope that answers.
    Make sure you read the installation guide and follow it verbatim.
    Regards,

Maybe you are looking for

  • How to get the text of the textArea ?

    Hi, expert i have created a new component com1, then i created a table view name 'result'. then i add a textarea by modifying the result.htm textArea id     = "TAMSG"                  text   = "test......" then i add a button in the result.htm the me

  • Please Help!! Network Card Won't Detect Modem.. Advise about my options?

    Thank you in advance for reading my post and for any help and advise.. I am on a friends computer because my Network Card went caput!.. now my computer can not detect my modem.. What happened?.. my surge protector did not protect my iMac during a thu

  • Text Format Lost

    I have a movieclip symbol in my flash document and in it's own timeline it sets the text format of various dynamic and input text boxes to a predefined format. When i change the text from the main timeline i.e. movieclip.textbox.text ......it resets

  • I keep getting a notice to install Java now that I have OS X Yosemite.  How do I get rid of it?

    I installed OS X Yosemite a couple of weeks ago.  I continually get a pop-up message to install Java.  Also my Mac seems to be performing a little slower than usual.  What can I do?

  • What is the best practice to create tabs ?

    I need help on this issue please, I need to create 3 different tabs, each one wih different content : 1) plain text 2) small form 3) flash app What is the best practice ? thanks in advance...