REP-1437: Run time error in the PL/SQL development environment (DE).

I have a report that has always worked. Now I get the following error
REP-0003: Warning: Unable to open global preference file.
Starting report STCONF6 [Mon Nov 10 21:38:59 2008] ...
REP-1437: Run time error in the PL/SQL development environment (DE).
PDE-PSD001 Could not resolve reference to <Unknown Program Unit> while loading <Unknown> <Unknown>.
End report STCONF6 [Mon Nov 10 21:39:10 2008].
What is it? I DON'T know.
Regards SILVIA

I recall my report from a form, I get the parameter form with my parameters, then click on the traffic light to run and the error appears here
Silvia

Similar Messages

"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'name'. Make sure it exists and that its name is spelled correctly.

When I run the code below I get the following error:"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'False'. Make sure it exists and that its name is spelled correctly. Note that I do not call
anything by the name of "false" anywhere in this code.
The subject code (the underscored line of code is highlighted in the debugger when the error occurs):
Option Compare Database
Private Sub JobAssign_Click()
MatLotListAvail_openform
End Sub
Function MatLotListAvail_openform()
Dim dbsAPIShopManager2010 As DAO.Database
Dim rstMaterialLotJobJoint As DAO.Recordset
Dim strSQL As String
Set dbsAPIShopManager2010 = CurrentDb
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID" = "tempvars!JobID" And "MatLotID" = "tempvars!MatLotID"
Set rstMaterialLotJobJoint = dbsAPIShopManager2010.OpenRecordset(strSQL, dbOpenDynaset)
If rstMaterialLotJobJoint.EOF Then
DoCmd.OpenForm "JobAssignMatConf", acNormal, "", "", acEdit, acNormal
Forms!JobAssignMatConf!PartapiIDVH = TempVars!PartapiID
Forms!JobAssignMatConf!JobapiIDVH = TempVars!JobapiID
Forms!JobAssignMatConf!JobIDVH = TempVars!JobID
Forms!JobAssignMatConf!MaterialLotIDVH = TempVars!MatLotID
Forms!JobAssignMatConf!Desc = TempVars!MatDesc
Forms!JobAssignMatConf!recdate = TempVars!recdate
DoCmd.Close acForm, "MaterialLotListAvailable"
Else: MsgBox "This material lot has already been assigned to this job."
DoCmd.Close acForm, "MaterialLotListAvailable"
End If
End Function

I think the SQL statement should be
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID=" & _
tempvars!JobID & " AND MatLotID=" & tempvars!MatLotID
This assumes thatJobID and MatLotID are number fields.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Abap run time error at the time of GR

I am facing a ABAP run time error at the time of GR of STO through MIGO_GR, then abap run time error is generated, details are given as per the Tcode:- ST22;
Runtime Error          MESSAGE_TYPE_X
ShrtText
   The current application triggered a termination with a short dump.
What happened?
   The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
Transaction
   Transaction......... "MIGO "
   Program............. "SAPLMBWL"
   Screen.............. "SAPLMIGO 0001"
   Screen line......... 15
Information on where terminated
     The termination occurred in the ABAP program "SAPLMBWL" in
     "MB_POST_GOODS_MOVEMENT".
     The main program was "SAPLMIGO ".
     The termination occurred in line 56 of the source code of the (Include)
     program "LMBWLU21"
     of the source code of program "LMBWLU21" (when calling the editor 560).
Source Code Extract
     55    IF NOT sy-subrc IS INITIAL.
>>>>>       MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH            "385830
     57                  sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.

Hi Tiwari,
The error seems to be triggered by note 385830. Pls refer to 'Note 556000 - Short dump due to note 385830' in www.service.sap.com
Btw, which version are you in?
Best Regards
Sathees Gopalan

Why getting "Run-time error 2046 the command or action 'GoToRecord' isn't available now"

Hello,
I'm running this on Form Load:
Private Sub Form_Load()DoCmd.GoToRecord , , acNewRec
End Sub
when I'm in the office connected to the LAN, the database opens without any error but when
I'm working remote through a VPN, I get this error:
Run-time error 2046 the command or action 'GoToRecord' isn't available now.
I'm wondering if this is related to a speed issue and more importantly, how to fix it?
Thanks,

Make absolutely sure the query behind the form is updateable and the form allows edits
Use the following code with the forms On Open event:
DoCmd.ShowAllRecords
DoCmd.GoToRecord , , acNewRec
See if that helps. Have no clue why it would work in one environment but not another.

Run-time error for the chart - TBUtilities

Hello,
I'm trying to create a report template with the BI Publisher desktop plugin. The load of the xml file, the Table creation and PDF export work fine. When I want to add a chart to the template (Insert -> Chart...), I have a Microsoft Visual Basic Error:
Run-Time error '-2147024894(80070002)':
File or assembly name TBUtilities, or one of its dependencies, was not found.
I use Word 2000 (9.0.8950 - SP3), .Net framework 2.0 and Java JRE 1.5.0_05.
I checked the other topic about this type of error but I didn't find any solutions...
Is there a patch to fix this error ???
Thanks

Has anybody got an answer for this one, as it has just happened to me
Gus

Loading Itunes on Windows so that I can get my Iphone synch etc. But I keep getting a run time error for the Microsoft Visual C Run time Library

In loading Itunes down on my PC using Vitsa I keep geeting an error message saying that a program is trying to load: Microsoft Visual C++ Runtime Library and ITunes will not complete the down load. Any Suggestions

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Run time error while closing the CRM Order using BAPI

Hi Experts,
Need your invaluable suggestions here.Apologies for the lengthy mail, intention is to give clear idea of the issue.
I am facing an issue while closing the CRM orders. According to our business process, when an issue is solved we will keep the order in resolved status only. We will not directly close the order from the CRM tool, instead we have created a custom program for the same purpose.
For the custom program we will give input as the order number and execute it, this will close the order.
Here close the order means assigning it to Close status as well assign the reason code.
We have created some reason codes for closed status.
So when the program is run the Order moves from resolved status to closed status along with reason code.
But of late we are facing some problems with this program, it is giving run time error for some CRM orders.
Run time error message : The ABAP/4 Open SQL array insert results in duplicate database records.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught in procedure "CRM_SERVICE_OS_UPD_OST_DU" "(FUNCTION)", nor was it propagated by a RAISING clause.
Please find my code which have used in the custom program
Closing the resolved SOs in the system
    CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN_OW'
        EXPORTING
          objnr                     = iv_guid
          user_status          = lc_status_closed
       EXCEPTIONS
         object_not_found          = 1
         status_inconsistent       = 2
         status_not_allowed       = 3
         OTHERS                        = 4.
    IF sy-subrc <> 0.
      WRITE : 'Error at maintaining status'.
    ENDIF.
Set reason code
build lt_subject
    ls_subject-ref_guid = iv_guid.
    ls_subject-katalogart = 'A2'.
    ls_subject-codegruppe = 'ZR000003'.
    ls_subject-code       = 'ZR33'.                      " Reason code
    ls_subject-mode       = 'A'.
    APPEND ls_subject TO lt_subject.
build lt_ossset
    ls_osset-ref_guid        = iv_guid.
    ls_osset-subject_profile = 'ZREASON03'.
    ls_osset-profile_type    = 'G'.
    ls_osset-subject         = lt_subject.
    APPEND ls_osset TO lt_osset.
build lt_service_os
    ls_service_os-ref_guid = iv_guid.
    ls_service_os-ref_kind = 'A'.
    ls_service_os-osset     = lt_osset.
    APPEND ls_service_os TO lt_service_os.
build lt_input_fields
    REFRESH: lt_input_fields, lt_field_names.
    CLEAR : ls_input_fields, ls_field_names.
    ls_field_names-fieldname    = 'CODE'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'CODEGRUPPE'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'KATALOGART'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'SERVICE_PROFILE'.
    APPEND ls_field_names TO lt_field_names.
    ls_input_fields-ref_guid    = iv_guid.
    ls_input_fields-ref_kind    = 'A'.
    ls_input_fields-objectname = 'SERVICE_OS'.
    ls_input_fields-field_names = lt_field_names.
    APPEND ls_input_fields TO lt_input_fields.
     CALL FUNCTION 'CRM_ORDER_MAINTAIN'
      EXPORTING
        it_service_os     = lt_service_os
      CHANGING
        ct_input_fields   = lt_input_fields
      EXCEPTIONS
        error_occurred    = 1
        document_locked   = 2
        no_change_allowed = 3
        no_authority      = 4
        OTHERS            = 5.
    IF sy-subrc <> 0.
      WRITE : 'Error at maintaining reason'.
    ENDIF.
    CALL FUNCTION 'CRM_ORDER_SAVE'
      EXPORTING
        it_objects_to_save   = lt_header_guid
        iv_update_task_local = lv_update_task_local
      IMPORTING
        et_saved_objects     = lt_saved_objects
      EXCEPTIONS
        document_not_saved   = 1
        OTHERS               = 2.
    IF sy-subrc <> 0.
      WRITE : 'Error at saving'.
    ELSE.
      WRITE : 'Successfully Closed'.
      COMMIT WORK AND WAIT.
    ENDIF.
Run time error is coming at COMMIT WORK AND WAIT statement.
Please let me know any corrections are required in the above program.
When I analyzed the run time error I have found that it trying to insert the record in CRMD_SRV_OSSET for that CRM order, but already one record is present in the table for the same CRM order number.
For most of the CRM orders there is no entry in this table so they are closing successfully but for a few orders for which there is an entry we are getting the above run time error.
There is nothing wrong with the orders which have an entry already in the table CRMD_SRV_OSSET, I need to close these kind of orders with out run time error.
Kindly provide your feedback.

Hi Dinakar,
You posted this in APO PPDS forum. This question should go to PP forum where someone could answer it.
Please close this thread and open a new thread in PP forum so that you could get help quickly from the relevant experts.
Regards - Pawan

What causes Run Time Error 10086 when attempting an external calibration with the Calibrate_E_Series funcition.

I am using Vb6(sp5), NT4, Component Works (latest), and Ni-Daq 6.9.1. The error occurs when using either a PXI-6052E or PXI-6070E. The Self Cal works fine but the external cal code generates this error during the call. The code used is taken directly from the programming example in the NI_DAQ programmers reference for the Calibrate_E_Series function.
The Error Text is:
Run-time error '10086':
The external reference is invalid

John;
I found a Knowledge Base about that error you can refer to. The KB, originally, talks about Labview, but, as Labview makes NI-DAQ function calls in the same way any other Software language, you can apply the same concepts when using VB. The link is:
http://ae.natinst.com/operations/ae/public.nsf/fca7838c4500dc10862567a100753500/2d8abbbb8d45ff74862565f6005c8d7b?OpenDocument
and the KB number is 18TAPEY5
in case you prefer to search for it at our home page.
Hope this helps.
Filipe
Applications Engineer
National Instruments

Xml Publisher run time error '5148'

Dear
I am using XML publisher to convert data in excel from the oracle,so first i have generated data in xml by report builder and open xml file in Word document through >template builder >data > load xml data,it's find but i use insert menu and select all field then it give message which i have mentioned below,
run time error '5148'
The number must be between 1 to 63
I think, is it column limitation because i have done this activity later but right now i have added more column so may be that's why it is showing the error but my client need to show data in excel,so how i can fulfill this requirement,is there any other solution ?
Please help on this regard. thanks in advance.

Just for future poor souls who may be pulling their hair out over the same issue, I eventually got to the bottom of this cryptic error message.
Do not try to import all your fields at once if your group has over 63 of them, as it will fail.
If you use the Insert Table option, and try to put all the fields in at once, it will give you a more meaningful message, and the one it SHOULD have given you in the first place, which is "A table cannot contain more than 63 columns".
So - Import them, a few at a time. Then move them all into one group and you're good to go.

Run time error after starting eclipse

Hello,
after installation of the SAP Eclipse Theme Editor the following run time error is reported after each restart of eclipse:
java.lang.ClassCastException: com.sap.ur.plugins.ThemeEditor32Input cannot be cast to com.sap.ur.plugins.ThemeEditorInput
     at com.sap.ur.plugins.ThemeEditor.init(ThemeEditor.java:188)
     at org.eclipse.ui.internal.EditorManager.createSite(EditorManager.java:798)
     at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:647)
     at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:465)
     at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
     at org.eclipse.ui.internal.EditorAreaHelper.setVisibleEditor(EditorAreaHelper.java:271)
     at org.eclipse.ui.internal.EditorManager.setVisibleEditor(EditorManager.java:1429)
     at org.eclipse.ui.internal.EditorManager$5.runWithException(EditorManager.java:942)
     at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
     at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:4041)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3660)
     at org.eclipse.ui.application.WorkbenchAdvisor.openWindows(WorkbenchAdvisor.java:803)
     at org.eclipse.ui.internal.Workbench$31.runWithException(Workbench.java:1567)
     at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
     at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:4041)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3660)
     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2548)
     at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
     at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
     at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
     at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:115)
     at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:620)
     at org.eclipse.equinox.launcher.Main.basicRun(Main.java:575)
     at org.eclipse.equinox.launcher.Main.run(Main.java:1408)
I can work with this editor anyway after choosing the project. But I still have a problem because the preview will not change when I choose a different UI element. The preview alway shows the text "welcome to the SAP ThemeEditor!". When I modify style parameters for the UI element Text the preview is modified in the right way. I already set the Internet Options for the Internet Explorer as suggested. Is it possible that the reported run time error is the reason for the preview problems? The external preview works fine.

Hi,
I would suggest you to remove NWDS, then ensure that nothing left on the disk related to NWDS, and then try a fresh install.
Best Regards,
Ervin

Run time error 2147467259

Hello,
while opening a query/ a workbook in the bex I get an error message "Run time error 2147467259 - The method 'position' for the object 'commandbar' was aborted."
Somebody has an clue what this is about? I know this error from VBA but I don't know how to solve it in relation to BEX...
Thanks in advance.
hansi

Hi ,
Pls check below threads , may be it will helpful.
https://forums.sdn.sap.com/click.jspa?searchID=20998303&messageID=6674385
https://forums.sdn.sap.com/click.jspa?searchID=20998303&messageID=6862348
Thanks & Regards,
Ramnaresh.P.

Run time error while saving sales order

Hi all,
i am working on IDES ECC 6.0, when i am saving an sales order(OR) i am getting run time error in the table CRMPAROLTP, program SAPMV45A.
i am using 4 GB RAM, still having a space of 30 GB for only IDES to save the data.
so, how to solve it.

Hello,
I doubt the runtime error (I am assuming you mean that you got a short dump) you mentioned in your original post has anything to do with the warning messages you see when doing a check (Ctrl+F2) on table CRMPAROLTP and program SAPMV45A. These warnings should not cause a short dump or runtime error.
The warning message for the table has the following long text:
Table CRMPAROLTP: Key length > 120 (Restricted functionality)
Message no. DT214
Diagnosis
The key length, i.e. the sum of the field lengths of all the key fields of the table, is more than 120 bytes.
System response
This is a warning.
Procedure
Note the following restricted fuctionality for this table:
- Table contents cannot be transported by specifying key values, at
best by specifying generic key values with a maximum length of 120
bytes.
- The table may not be used as the base table of a lock object.
The warnings in SE38 for program SAPMV45A are mostly related to Unicode and have no reference to the table CRMPAROLTP.
If you haven't already done so, please check the SAP Note referenced in my first reply since this does provide a solution for short dumps related to table CRMPAROLTP.
Of course, since I don't know specifically what the short dump message is that you received, I could be basing my assessment on false assumptions. If you have those details it is better for the SDN community as a whole if you include the information in this thread instead of sending it to me offline.
Best Regards,
Jamie

While creating a student through piqstc getting abap run time error

Hi Experts,
I am new to SLCM,
By following Micheal Fan's Basic configuration document,
I have done the basic configuration required for creating a student & maintaining the student file,
But while trying to create a student through PIQST00/PIQSTC getting abap run time error,
Attaching the txt file for complete view of abap error.
Please guide how to resolve this error.
Regards,
Prashanti Swain

Hi Rob,
Thanks a ton, for your quick reply,
But I have not understood the reason of the issue.
As i said I followed Micheal Fan's Document for configuration,
in that document there is no configuration step is defined for Vendor master data.
Could you please explain it in a more detail way.
Regards,
Prashanti Swain

XL reporter launching in SAP 8.81 PL:00: run time error

Hello experts,
We have a customer who is on SAP 8.81 PL:00.
They are trying to use XL reporter but when they try using XL reporter, they get:
Run time Error 91
The system then freezes.
Have checked they have Microsoft.net 1.1 which they do and that they have the correct excel.exe config file which they do.
Any suggestions or known faults with 8.81?
Thank you in advance,
Andy

Hi Andrew,
'Object reference not set to an instance of an object ' is a known error, this usually happens because there was a previous install of the same add on which was not uninstalled completely. This can cause the error.
I would suggest you to go through sap notes 1247315, 1287193. These all suggests about run time errors, cleaning registry files and clean install etc.
Hope it helps
regards
Johnson

Automatic Retry run-time error step in TestStand

Hi, I am using an instrument at many places in my sequence (let's say 5 times). I am using the Labview instrument driver. Sometimes (every 50 calls), the instrument driver call gives me a run-time error because the instrument is somehow busy. But usually by doing a retry on the step that caused the run-time error, it works. However, in few cases, the instrument is really defective. In order to make my sequence more robust, I want all that handled in TestStand (I want the operator to stay away from the big grey popup. Many of them freaks out when they see this…). I was thinking adding 2 callbacks to my sequence: 1) Post run-time error: a. If local “index” == 1, run cleanupb. If “index” == 0, retry the current step (by manipulating the current step id)c. Incrementing “index” to 12) Post step:a. If step.Result.Status != “Èrror”, ”index” = 0 Index is a local variable in my sequence This algo might work, but is there another way of doing this? You can loop on the failures, but not on the errors.
Thanks
Alexandre

Alexandre,
there are many ways to accomplish your task.
Here's a small list:
- Disable default error handling and "do error handling in your sequence" (using gotos with precondition)
- Use the SequenceFilePostStepRuntimeError Callback
- Handle the retry-functionality within your codemodule
I'd suggest you to choose either the second or third option. As Juergen already stated, you can alter the behaviour of TS in regard to runtime errors. The default behaviour displays a dialog asking the operator on how to react. On automated systems, this setting is nonsense, therefore it is suggested to switch to "Run Cleanup". I wouldn't choose any other setting here.
Using the Callback Sequence is nice since it can be used in a very general way and you can call certain alternativ test strategies if the instrument fails to work.
Implementing the error handling within the codemodule nevertheless optimizes execution times and could be better in other aspects as well. But on the other side, you have to deside what should happen if the error cannot be solved by the module itself.....
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

REP-1437: Run time error in the PL/SQL development environment (DE).

Similar Messages

Maybe you are looking for