Replace sql job definition without changing the schedule

Hello,
I need to prepare a script to check if a job exists and if it does then it should replace just the job definition (steps), and keep the current state and schedule(s)
Any ideas ?
Thanks
Javier Villegas |
@javier_vill | http://sql-javier-villegas.blogspot.com/
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you

Just alter one in SSMS and script out the change by hitting the Script button on the Job Properties dialog.
That will give you a starting point for your script.
In particular see
sp_update_jobstep
David
David http://blogs.msdn.com/b/dbrowne/

Similar Messages

  • How can I change the password in the iBook donated to our nonprofit.  No password was given with the iBook?  We need to put in printer and other software.  Help, we can use the laptop without changing the password.

      How can we change the password in the iBook donated to our nonprofit?  No password was given with the iBook and every time we try to install items, the password window pops up.  We need to put in printer and other software.  Help! We can use the laptop without changing the password.

    If you did not get an OS X install-restore DVD with the computer you may need
    to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
    version. The original grey-label install set of software and OS X it shipped with
    likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
    G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
    which accompanied other computer build models generally do not interchange.
    The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
    A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
    {With the correct disc installer, you can use it to change a password and other
    things including re-install, and perform disk utility functions, etc.}
    There is a chance you may be able to get a white-label Replacement 10.4 DVD
    or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
    from a Mac OS X system specialist; these have been available yet hard to get
    as not all persons involved with them seem to know if they still exist until someone
    is asking. These aren't retail stock, are special discs for computers who could use
    a system later than original old discs; these are complete install discs not for one
    specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
    do not replace specialized original install DVD, such as an early Intel mac requires.
    You'd need to have a serial number of the computer, and a method of payment
    when seeking some replacement system media from Applecare or Apple sales
    and these discs are not available in a retail store. The original Retail discs are
    labeled differently and shipped in a retail box with a big X on the front. Other
    sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
    or computer resellers who handle repaired Macs. Avoid mystery grey label ones
    that were intended to be sold and kept with their original computer kits.
    Good luck!

  • Urgent:How to modify a script without changing the print programme

    Hi all,
    Can any body pls tell me <b>How to modify a script without changing the print programme</b>
    Give m esome real time examples.
    Good points willbe rewarded
    Thanks

    Hi
    You can write a external Subroutine to fetch the extra data into the script program
    see the following sample code
    How to call a subroutine form SAPscripts
    The Form :
    /:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
    /:USING &EKKO-EBELN&
    /:CHANGING &CDECENT&
    /:ENDPERFORM
    The report :
    REPORT zkrpmm_perform_z1medruck .
    DATA : BEGIN OF it_input_table OCCURS 10.
    INCLUDE STRUCTURE itcsy.
    DATA : END OF it_input_table.
    déclaration de la table output_table contenant les
    variables exportées
    DATA : BEGIN OF it_output_table OCCURS 0.
    INCLUDE STRUCTURE itcsy.
    DATA : END OF it_output_table.
    DATA : w_ebeln LIKE ekko-ebeln,
    w_vbeln LIKE vbak-vbeln,
    w_zcdffa LIKE vbak-zcdffa.
    FORM CDE_CENT
    FORM cde_cent TABLES input output.
    it_input_table[] = input[].
    it_output_table[] = output[].
    READ TABLE it_input_table INDEX 1.
    MOVE it_input_table-value TO w_ebeln.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
    input = w_ebeln
    IMPORTING
    output = w_ebeln.
    SELECT SINGLE zcdffa FROM ekko
    INTO w_zcdffa
    WHERE ebeln = w_ebeln.
    it_output_table-name = 'CDECENT'.
    MOVE w_zcdffa TO it_output_table-value.
    MODIFY it_output_table INDEX 1.
    output[] = it_output_table[].
    ENDFORM.
    COPING SCRIPT
    There are some Standard Sap Scripts in SAP. We cant directly execute them in scripts we have to use some T-codes and by giving some input to the required fields we can see the output printform.
    I will show one example. There are some Standard Sap Scripts such as MEDRUCK which is a standard Sap Script for Purchase Order and RVINVOICE01 for billing and so on...
    To see oupt of MEDRUCK go to T-code ME9F give purchase order number and execute select one number and click on dislplay messages button on application tool bar you can find the print form of MEDRUCK.
    You cannot change the Standard Sap Scripts but you can use Standard Sap Scripts and Copy them to userdefined Script and can make changes to them and replace standard Sap Script with usedefind script.
    Ex: Go to SE71,
    on menu bar u find Utilities->copy from Client. click on it u ll find new screen showing
    Form name:
    Source Clinet:
    Target Form:
    give Form name as usedefined form name EX: ZFORM1
    Source client as 000 and
    Target form as MEDRUCK.
    execute.
    Now, the standard from MEDRUCK is copyied to your form ZFORM1.
    NOW, go to SE71 and give form name as ZFORM1 and do some changes to the form such as adding logo any thing. save and Activate.
    Now, you have done changes to the Form ZFORM1 and u have to replace your form with standard SAP Script.
    Go to NACE Transaction.
    on Applications select EF for purchase order and click Output types button on application tool bar.
    now select NEU as output types dobule click on Processing Routines.
    now click on Change option on application tool bar and on right side u find MEDRUCK in form place replace MEDRUCK with ZFORM1 and SAVE.
    go back twice and now go to T-code ME9F give the purchase order number and execute and select one option and click on display messges button .
    you will find the changes that you have done in ZFORM1. so we cant chage the standard Sap Scripts by copying the Standard Sap Scripts we can chage and replace with our forms
    Refer
    https://forums.sdn.sap.com/click.jspa?searchID=4089895&messageID=3239299
    Regards
    Message was edited by:
            Kiran Sure(skk)

  • How can I change the year of an album in itunes11 without changing the years of all titles?

    How can I change the year of an album in itunes11 without changing the years of all titles. For example: the reissues of an 1982 album has a 1995 bonus track, but I want it to be sorted as an '82 album? In earlier versions, when itunes sorted my album "by year", it took the year of the first title as the album's year (which makes a lot of sense). In itunes 11, however, the /highest/ year of any title in an album is taken to be the album's year. This upsets my entire catalogue. Can this be changed, will this be changed?

    Highlight all of the songs,File>Get Info, change the genre

  • Change the background color of a particular word without changing the background color of the rest of the text in a textbox

    Hello,
    I'm designing my own website and want to know how to change the background color of a particular word without changing the background color of the rest of the text in a textbox. If i can't do this, how can I create a Table, similar to Excel with iWeb?
    Thank you very much!
    Roger.

    If i can't do this, how can I create a Table, similar to Excel with iWeb?
    Read this :
         Create and add a TABLE in iWeb »
         More about a TABLE in iWeb »
         Sample 1
         Sample 2

  • How to change the schedule line date in SO with reference to value contract

    Hi SD Guru's,
    I need to change the schedule line date in the sales order with reference to the value contract by using some algorithm that i will write. The problem that i can't find the suitable place to add the algorithm. I can't add it to the Copy control because there is no schedule lines in value contract and copy control for schedule lines does no exist.
    I can not add to user exit MV45AFZZ  , because order that was created with reference to the value contract, does not go through this user exit.
    Do you have some ideas where i can add it?
    Thanks and Regards
    Viky
    Edited by: Viky Sloutsky on Oct 20, 2010 12:43 PM

    Hello Viky
    How about using program MV45AFZB- USEREXIT_CHECK_VBEP or USEREXIT_MOVE_FIELD_TO_VBEPKOM
    or program FV45EFZ1- USEREXIT_CHANGE_SALES_ORDER
    Does the program go through these exits when an order is created with ref to a value contract??
    Also I am wondering why you need to change a Schedule line determined by Availability check and/or delivery scheduling?

  • Is it possible to copy and paste a formula without changing the cell references?

    I am trying to paste a formula to a cell adjacent to where it currently is but when I do, the cell references in it change. I am trying to get exactly the same formula in the cell (without re-typing it).

    dedwards96 wrote:
    Just another quick question, is it possible to make a large number of cell references 'absolute'?
    Individual cell references in formulas may have four distinct states: relative, absolute column, absolute row, or absolute column and row. These are set using the popup menu on the reference itself. Click on the reference in the formula and choose one of the four states from the popup menu.
    Once set, you can fill the formula into the rest of a column or row using the Fill Handle (small circle at the lower right of a selected cell). Cell references in the new copies of the formula will remain absolute or adjst to their new position dependent on the setting for each reference. You can also copy and paste the cell (single click to select it, command-C to copy) with the same results.
    You can also copy/paste without changing the formula's cell references if you select the formula (Drag across the formula in the entry bar, copy, press tab to deselect and reconfirm the formula in the original cell) rather than the cell. Pasted into a new cell, the formula will appear as if you typed it in exactly as it was in the original cell—neither absolute references nor relative references will have changed.
    Regards,
    Barry

  • How to name individual clips without changing the name of the original file...?

    Hi,
    Theres likely to be a really simple solution to this, but i can't find it! I've done my in & out points, i've created a new clip and i'd like to give it a unique name. When i rename the clip the original file name also changes. How can i rename the new clip without changing the original file name?
    Please help,
    Thanks
    Ed

    Either make the clip a subclip or convert it to a new master clip. Both can be done in the Modify menu.

  • How can I rearrange the pages in a PDF without changing the assigned paged numbers.

    How can I rearrange the pages in a PDF without changing the assigned paged numbers? These correspond to the original document folio numbers.

    In theory it would be possible to 'record and play back' the page numbers using a folder-level script, but it's far from trivial. You would have to use the doc.movePage() function - presumably driven by a dialog box - to do the page shuffling so there was a way to track what was being done, then swap the page 'labels' of the two affected pages. That's where it gets messy.
    We have functions in the JSAPI which can read and write the page label, but they don't do things in a logical way. The 'getPageLabel()' function simply returns a string, but the 'setPageLabel()' method expects to be told the numbering scheme, prefix, etc. You'd have to parse the string and work out what scheme it was implementing.

  • How can i make a photo that is 10 x 6.6 to 10 x 8 without changing the image in Photoshop CS3?

    How can I make a photo that is 10 x 6.6 to 10 x 8 without changing the image in Photoshop CS3?

    I could be snarky and say change the image in a different version of Photoshop, but NO...
    The only way to make a photo that is one size into another size is to change the image.  You have a few choices about how to change it:
    One way is to simply expand the height from 6.6 to 8 inches using Image>Canvas Size, using the default setting of having the image centered and leaving the background either black or white, your preference.  This will add background color to the top and bottom of your image.  This won't change the image itself, but it will change its surroundings.
    Another way is to resize the image using Image>Image Size, entering the new dimensions after turning off the aspect ratio lock (resample on).  This will stretch the image vertically, however, so it's probably not a good option.
    Finally, you could resize the image using Image>Image Size, leaving the aspect ratio lock on and resample on, and increase the height from 6.6 to 8.  This will have the secondary effect of enlarging the width from 10" to a greater width.  Then you crop the resulting image back down to 10" width, which involves losing some edge areas of the image.

  • Adding a preset to an already edited photo without changing the edit

    Can someone please help me with adding a preset to already edited photos without changing the edit.  Basically I will edit an entire wedding and then I go back and pick out favorites for my bride and like to add the same artistic edit over them.  Since they are already all edited to my clean beautiful photo, (color balance, exsposure, editing for maybe none ideal lighting during ceremony) I would think there would be an easy way to add a preset without having it change all my adjustments I made so to speed up my process.  I know If I bring my photos to photoshop and bring them back into lightroom it pretty much resets it to basic, but I am sure there is an easier way to do this rather then having to open photoshop.  Thanks in advanced!

    bedophotonfilms wrote:
    Can someone please help me with adding a preset to already edited photos without changing the edit.  Basically I will edit an entire wedding and then I go back and pick out favorites for my bride and like to add the same artistic edit over them.  Since they are already all edited to my clean beautiful photo, (color balance, exsposure, editing for maybe none ideal lighting during ceremony) I would think there would be an easy way to add a preset without having it change all my adjustments I made so to speed up my process.  I know If I bring my photos to photoshop and bring them back into lightroom it pretty much resets it to basic, but I am sure there is an easier way to do this rather then having to open photoshop.  Thanks in advanced!
    Ensure that the "artistic edit" preset only includes the adjustments that are necessary. If, for instance, it
    should add a vignette effect, then make sure the preset doesn't include other adjustments like exposure, because that will make the preset override the carefully-chosen exposure in the clean beautiful version.

  • Create an mp4 from mov without changing the dimensions

    I am working on a project in InDesign that needs to output to DPS.
    I take screen capture movies which are saved in the default mov format. These movies are 700 px x 400 px. That can't change.
    I need to convert the mov to an mp4 to add to ID for DPS.
    I open Adobe Media Encoder but I am confused as to how to set the output controls.
    I don't want to change the dimensions.
    What setting will convert the mov to mp4 without changing the dimensions?

    Does this help?

  • When I insert a shape, how do I change the color without changing the texture?

    When I insert a shape, how do I change the color without changing the texture?

    Hi,
    you are working with a percentage width of your tables, for example:
    table width="123%
    td width="75%"
    td width="25%"
    So it is simply a arithmetic problem to get the proportional wide (means the ratio of % to cm) of your images, so that they do not break the frame. Certainly you could use (translated from German DW) "properties" and change the sizes there:
    Hans-G.

  • Can I alter the properties of an individual link on a HTML page without changing the other links?

    Hi there,
    I have a contact page created in Dreamweaver and have created an email link to launch Outlook when clicked on. However, all the links in my design have been set a certain way, i.e. white text knocked out of darker background. My email link however, is on white background so you can't see it against the white. I want to go in and simply change the color property of the email link without changing the other link colours on the page. I've tried but without luck. Is this possible to do?
    Thanks in advance for any help!

    Hello and thank you for your answer. I'm still a little confuse though.
    My existing HTML looks like this:
    <p><a href="[email protected]">[email protected]</a><br />
    My link preferences are for the who page and are at the top and look like this:
    a:link {
        color: #FFFFFF;
        text-decoration: none;
    a:visited {
        text-decoration: none;
        color: #FFFFFF;
    a:hover {
        text-decoration: none;
        color: #CCCCCC;
    a:active {
        text-decoration: none;
        color: #CCCCCC;
    .style2 {font-size: 14.5px}
    .style3 {color: #FFFFFF}
    Where exactly should I insert the new link ID that you suggested <a id="special_colors" href="url...">link text</a>
    Also, where exactly should I place the following in relation to the CSS document
    a#special_colors:link {color: red;}
    > a#special_colors:hover {color: green;}
    Sorry but this is all quite new to me. Thank you for your patience and help.

  • How to change color of iCal event, without changing the calendar.

    I have my work Exchange calendar imported to iCal.  When I want to change the color of an event in iCal, it actually changes the event to a differnet 'calendar' and therefore no longer shows up on my work calendar.  This wouldn't be a problem, excpet my secretary can no longer see the event on my work calendar that shows up on her PC.  So how can I change the color of 1 event, say to 'Important' or 'Must Attend', without changing the calendar?

    Welcome to the discussions, spet.
    Right click (Control-click) the calendar you want to change in the left pane and select Get Info. There is a colour selection button to the right of the calendar name..
    AK

Maybe you are looking for