Replication and logshipping on same data source object

TWO QUESTIONS:
Question1:
I have a database "dbABC" on SERVER1 that is log shipped to REPORTSERVER and is recovered Standby, Read Only.
I also need to replicate a subset of same data "dbABC" to a different SERVER2.
When I add the publication to SERVER1, is appears on REPORTSERVER and flags the logshipped "dbABC" (readonly) as a published database and displays articles and subscriptions on REPORTSERVER. 
Is there a way NOT to push the replication to the Report Server, since it is read only?
Question2:
Also, when changing ownership of "dbABC", will the ownership also log ship to the Read Only copy on REPORTSERVER and syncronize ownership between SERVER1 and REPORTSERVER?
Janine

It is meta data which travels with the backup and log shipped tlogs.
Unless you do your final restore with the keep_replication switch this metadata will disappear when you do your final restore and run the recovery on your database.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941
This!
John Sansom | SQL Server MCM
SQL Server DBA Blog |
Twitter: @SqlBrit |
LinkedIn

Similar Messages

  • Microsoft Access Text Driver missing! and ...Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "(null)".

    In order to use OpenRowSet, I installded Microsoft Access Database Engine 2010. However, I could not find Microsoft Access Text Driver in Drivers of ODBC Data Source Administrator.  Could I get some help with that?
    Thank you very much!

    I am local admin and try to run the following script, but I got an error. Could anyone help me look at it?
    EXEC sp_configure 'show advanced options', 1
    go
    RECONFIGURE
    GO
    EXEC sp_configure 'ad hoc distributed queries', 1
    go
    RECONFIGURE
    GO
    SELECT * FROM OPENROWSET('MSDASQL',
    'Driver={Microsoft Access Text Driver (*.txt, *.csv)};
    DefaultDir=D:\;','SELECT * FROM Test.csv')
    Configuration option 'show advanced options' changed from 1 to 1. Run the RECONFIGURE statement to install.
    Configuration option 'Ad Hoc Distributed Queries' changed from 1 to 1. Run the RECONFIGURE statement to install.
    OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
    Msg 7303, Level 16, State 1, Line 1
    Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "(null)".

  • ArrayCollections with same data source

    Hi Everyone,
    Recently I got in a project which use Tree objects to visualize and manipulate objects. The data source of this object must to be the same but with different visualizations. In some views this tree will be filtered and in other places it won't. The data source must to be kept consistently, if an object is update in a tree, it should reflect the updates in the other Trees.
    My question is quite simple, does ArrayCollections are really expensive objects in terms of memory even using the same data source? Or does it have to do with the fact they are manipulating different datasources as well?
    Please share your experiences.
    Thanks

    Hi,
    ArrayCollection is a very useful construct.
    http://blog.flexdevelopers.com/2009/03/flex-basics-arraycollection.html
    Just make sure you clean the open nodes and it will perform fine.
    http://kb2.adobe.com/cps/897/cpsid_89785.html#products
    That is my two cents
    Best

  • Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "Excel_Test"

    Here,
    I have created a Linked Server Called Excel_Test And its working fine ( For Retrieving data from excel to Sql Server Database Table ) ...
    I have written a Stored Procedure for inserting data , When i Execute that stored procedure it is inserting data to Table Which i have
    given.
    And the data which is in table should be shown in the application,
    But, Am getting the following error.
    Cannot
    initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "Excel_Test".
     Please help me on this.
     Thanks in Advance....

    Even am able to retrieve the data from Sql Server management studio.
    The same retrieved data should be shown in the application (Dashbord).
    Query : Select * from OpenQuery(Excel_Test,'Select * from [Sheet1$]')
    Am getting the output excatly the data in the excel sheet.
    But when am opening that application where the above data should be shown am getting the below error.
    Cannot
    initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "Excel_Test".
     Is this error is because of problem in Dot Net Coding or in the linked server.
    Thanks in Advance.....

  • Crystal report for visual studio 2010 data source object is not valid error

    Hello,
    I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
    On my developer station, this operation works without problem but on client station, I get this error.
    The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
    Can someone help me?
    Thank you.

    Thank's for your answers
    Dim rsPkLst As ADODB.Recordset = Nothing
    Dim report As New crPickingList
    ' Fill ADODB.Recordset with SQL Statment
    If rsPkLst.RecordCount > 0 Then
          report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
    EndIf
    This error appears during  "report.SetDataSource(rsPkLst)" instruction.
    ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
    This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
    Developer and client station runs under Windows XP SP3.
    On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
    On client side I install CRRuntime_32bit_13_0_1.msi.
    Both stations use Microsoft .Net Framework 4.
    Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
    (I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
    David.

  • BusinessObjects Explorer The creation of the data source object tree failed

    Hi,
    I'm trying to create a new information space in BusinessObjects Explorer 4.0.  When I select the Universe I want to use and click "New" Information Space I get the following error.
    Failed to retrieve the data source details.
    The creation of the data source object tree failed.
    I'm just using a local installation, BI Platform 4.0, Client Tools, and Explorer are all installed on my Windows 7 machine.  It's intended to be a demo environment.
    Any guidance would be appreciated!
    Jeff

    Hi Jeff,
    first of all BI4 Enterprise is not supported on Windows 7 and it may not work properly for various reasons.
    But you can give this a try:
    Update the command line parametres of each of the Explorer Services to use a different value for the connection server libraries
    The changes are made to the command line of each of the Explorer services
    - Master
    - Exploration
    - Indexing
    - Search
    Remove the following from the command line parameters of the existing Explorer services
    -connectivity_dir "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer"
    Example of the original Explorer Master server command line parameters:
    -Djava.awt.headless=true -Dosgi.configuration.area=configuration.BI40.ExplorerMasterServer1 -server -XX:MaxPermSize=256m -Dosgi.clean=true -Xmx1g -jar plugins/org.eclipse.equinox.launcher_1.0.101.R34x_v20081125.jar -loggingPath "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/logging/" -connectivity_dir "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer" -serverkind explorerMaster
    And update the server command line parameters with the following:
    "-Dbusinessobjects.connectivity.directory=C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer"
    Example of an updated Explorer Master server command line parameters:
    -Djava.awt.headless=true -Dosgi.configuration.area=configuration.BI40.ExplorerMasterServer -server -XX:MaxPermSize=256m -Dosgi.clean=true -Xmx1g -jar plugins/org.eclipse.equinox.launcher_1.0.101.R34x_v20081125.jar -loggingPath "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/logging/" -Dbusinessobjects.connectivity.directory="C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer" -serverkind explorerMaster

  • Is it possible to use same data source for two info cube

    Hi,
    My Problem is in BW we can not have value of material at storage location level.In R/3 also value is maintained at plant level.
    Then we searched and we found out one hot to doc for summarized display of stock values on storage location level.
    Problem is that we have gone live in last December and we are using " 0AFMM_C02 " and it contains around 1,81,26,000 records. and according to note we have to use
    "0IC_C03".
    Both the cube uses same data sources for the data.So, how to get the data for "0IC_C03".
    and how to delete the data of existing info cube.And is it possible to delete data selectively from the info cube.
    Pls. help.
    Regards,
    viren.

    Hi,
    You can't create update rule from PSA.You can create from the infosource or from ODS or from cube to cube or ODS to ODS.
    In your scenario, what you can do is create update rules from the ODS to the new cube and then transfer the data from there. Or from the Infosource create rules to the new data target and then upload the full data and then set up the delta.
    Third option is to create update rules from the existing cube to the new cube and then load all the data one time. Then you can deactivate the update rules as that was needed only for 1 time data transfer.
    Cheers,
    Kedar

  • How can I use the same data source twice?

    in our system there is already a complete transfer of calculations to BI (0CO_PC_PCP_01).
    However I want to create a new data flow from ERP starting from the same data source.
    Is this possible?
    Thanks for help!!

    Hi!
    welcome to SDN forums.
    anydata source can be mapped only to a single infosource. but it will not ristrict you to have different datatargets from a single infosource. so you have to use filters in infopackages to select the data target and filter the data for this data sources. Only thing you have to do with old  dataflow is just ristrict the data relavent for  the 1st Datatarget in old Infopackage and re.initialize.
    with regards
    ashwin

  • Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracl

    I have created a linked server in a SQL Server 2005 connecting to either an Oracle Database and a SQL Server 6.5 database and getting the following error for both links when trying to query using provider OraOLEDB.Oracle, please help.
    OLE DB provider "OraOLEDB.Oracle" for linked server "finprod3" returned message "ORA-12154: TNS:could not resolve the connect identifier specified".
    Msg 7303, Level 16, State 1, Line 1
    Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "finprod3".

    What version of Oracle client software are you using? 32 bit or 64 bit? Is the OS 32 bit or 64 bit?
    12154 generally means the client can't figure out what TNSNames.ora entry you're referring to, which is the part you passed as "data source" in the oledb connection. Did you configure the client? Does SQLPlus connect without issue?
    There's also a known issue where running 32 bit client software on a 64 bit OS can result in that error in some versions, due to parenthesis in the path of the executable - 32 bit apps go in Program Files (x86) on a 64 bit OS. Applying the latest patch level to the client software will resolve that issue.
    Greg

  • Health App Lists Itself and iPhone as a Data Source

    I use FitBit to track my steps. I also use the Sync Solver app which syncs data from FitBit to Apple's Health app. When I open the Apple Health app and look at the list of data sources for Steps, there are 3 data sources listed:
    Sync Solver
    iPhone 5s
    Health
    Sync Solver is at the top of the list because it's the app that I want to take priority over all other data sources. But I don't understand the difference between "Health" and "iPhone 5s".
    I assume that "iPhone 5s", when listed as a data source, means the data gathered from the phone's built-in motion sensor. But what is "Health"? Why is it listed as a data source for Steps? It's like the Health app is using itself as a data source, which doesn't make sense to me.
    This same phenomenon is true when looking at the data sources for Walking + Running Distance - both "Health" and "iPhone 5s" are listed as data sources for that particular metric.
    Coincidentally, neither "Health" nor "iPhone 5s" appear on the main Sources tab for the Health App (i.e., the master list of apps that are sources of data for the Health App).
    Does anyone know the difference between "Health" and "iPhone 5s" as data sources?
    P.s. - "iPhone 5" is simply the name of my iPhone. This would be listed differently depending on what your iPhone is named (e.g., "Eric's iPhone", etc.).

    ArrayCollection is a view of a source array or ArrayList.  You can have multiple views of the same data by assigning the .list of one AC to another AC.
    You can create a separate hashmap of ID's to indices in that other AC
    Alex Harui
    Flex SDK Developer
    Adobe Systems Inc.
    Blog: http://blogs.adobe.com/aharui

  • Can we with ligthroom  have the sofware set up on multiples computer mac and mc and share the same dat base library?

    can we with ligthroom  have the sofware set up on multiples computer mac and mc and share the same dat base library?

    No, a Lightroom catalog cannot be on a networked drive, and can only be accessed by a single user at a time.

  • SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

    Hi,
    I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
    "An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
    I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
    Thanks in advance.
    Poomani Sankaran

    Hi Poomani,
    Thanks for posting your issue,
    you must have to Install SQL Server 2012 ADOMD.Net  on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
    http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Select field and hide field at data source ganaration  for LO extrction

    Hi GURU,S
    Could any one tell me what is differce between select field and hide field at data source ganation in LO at r3 side.what happend if u select field and hide field.
    Regards.
    hari

    Hi Hari,
    If you choose Select fields, you'll be able to filter this IO in Selection tab of infopackage (set IO's value(s) to be loaded).
    In case of hide field you'll not have it in the transfer structure at all.
    Best regards,
    Eugene

  • Using ConnBean and CursorBean with a Data Source

    Hi all,
    I',m making a web app. using the Jdev (RUP4) with OA Extension. I looked in the help menu under "About Data-Access JavaBeans and Tags". Here I found the following example, but for some stange reason I cannot get the setProperty to work.
    Example: Using ConnBean and CursorBean with a Data Source This following is a sample JSP page that uses ConnBean with a data source to open a connection, then uses CursorBean to execute a query.
    <%@ page import="java.sql.*, oracle.jsp.dbutil.*" %>
    <jsp:useBean id="cbean" class="oracle.jsp.dbutil.ConnBean" scope="session">
    <jsp:setProperty name="cbean" property="dataSource"
    value="<%=request.getParameter("datasource")%>"/>
    </jsp:useBean>
    <% try {
    cbean.connect();
    String sql="SELECT ename, sal FROM scott.emp ORDER BY ename";
    CursorBean cb = cbean.getCursorBean (CursorBean.PREP_STMT, sql);
    out.println(cb.getResultAsHTMLTable());
    cb.close();
    cbean.close();
    } catch (SQLException e) {
    out.println("<P>" + "There was an error doing the query:");
    out.println("<PRE>" + e + "</PRE>\n<P>"); }
    %>
    Does anyone know how to set the "Property" to a datasource and make it work?
    Best regards,
    MHCI

    There is no point-and-click (Import Data Source Metadata) way to use an LDAP server as a datasource. You have to use the Java Function provided on dev2dev. If you need help with it, please post here.
    - Mike

  • How can i make 2 combo boxes as the same data source and group by each combo box items separately?

    I have 2 combo boxes  If I have data table like below
    TableA
    ID  NAME
    1     A
    2     B
    3     C
    4     A
    I make "TableA" as data source of "combobbox1" and "combobox2" like
    combobox1.datasource = TableA
    combobox1.displaymember = "ID"
    combobox2.datasource = TableA
    combobox2.displaymember = "Name"
    I want when combobox2 select index at "A"  , Combobox1 show only the items at ID = 1 And ID = 4
    Thanks 

    This is not actually a question to be posted in SQL Server. Here is a link for ASP.NET forum.
    http://forums.asp.net/
    It looks like there is a filter that can be applied in .NET dataset and populate the results in your combobox1. You may get better help from .NET forums for this question.

Maybe you are looking for