Report for Actual GR posted

Hi Gurus
Is there any business content infoprovider / report available in BI, which will give the actual GR qty (mvmt types 101,102 etc)  similar to MB51 in ECC?
Is there any BC provider which stores MSEG data?
regds
KS

Hi Srini,
The business content was activated an year ago, when the project team ran the initial loads from 2lis_03_BX  and 2lis_03_BF. the data was not used in the past. Now I am trying to make use of teh standard reports from BI, and I found that the extractor 2lis_03_BF  is only bring zero records. upon investigation, I found that the V3 job si not scheduled to load extraction queue for 2lis_03_BF, which I did. (Only the init delta with data was complete)
Cuurently I pulled all the records as delta from ECC into BI.
For reconcilliation, I am using one material and one plant for one period (Jan 2007). I tried for various periods in 2007 and and the data not seem to be matching for any.
Hope the issue is clear now.
My objective is to reconcile (Production) GRs in ECC with BI
I cannot reconcile with the production planning cubes, as there is difference due to confirmation date of production order and Actual GR posting date.
tks, KS

Similar Messages

  • Difference in S_ALR_87013557 Report and CJI3 Report for Actual Values

    Hi,
    I have created a Project & booked some cost on against WBS Elements. Now when see CJI3 report it shows correct values but in S_ALR_87013557 it shows different value for Actual-Overall. This value is slightly greater than the actual value.
    Please tell me how to resolve this issue?
    Thanks,
    Sandeep.

    Hi,
       CJI3 is a cost element report and S_alr......... is a Heirarchial report which will work on Value categories.
    This may be due inconsistencies in cost either by value categories or by some other way.
    Run CJEN and CJBN then check the report. still the problem persists.
    check the value categories in the IMG whether you have maintained all the cost elements that are used while posting to wbs and check whether there is any diplucation of cost elements by the transaction 'Check Consistency of Value Category' which is available in IMG.
    Navigation IMG>Project System>Costs-->Value Categories.
    Rgds
    Sudhir reddy

  • PS report for Actual and commitment Balance

    Dear experts,
    Is there any report in PS where i can see list of projects has actual balance and commitment balance?
    Note: I want to see only the balance of actual cost ( which is not settled) and commitment balance (Open PO, PR etc..)
    Regard
    Vetrivelan

    Hi,
    For commitment- CJI5
    actual - CJI3 with correct layout as per you requirement.
    also try S_ALR_87013558 report & go to line item report for detail actuals(& you have to change the layout accordingly) & commitment.
    hope this would help you...
    regards,
    SL

  • Multi-year monthly CO report for Actual/Budget/Variance

    I have a requirement of creating a 5-year cost centre report for the following:
    Actual by month (5 years x 12)
    Budget by month (5 years x 12)
    % of the monthly amounts compared to the total (5 years x 12)
    Variance (5 years x 12)
    The request is at the cost element level, by month and for 5 years.  I am trying to decide which reporting tool is appropriate for this request.  If I use the conventional CO report format (report painter) of one column per month for actual/budget/actual %/variance, there will be a lots of columns for 5 years!
    I am familiar with reporting tools of report painter, drill-down and SAP query, although I am not sure if drill-down can be used for CCA.  Would appreciate any suggestion for: 
    1) Reporting tools for multi-year output; and
    2) Report format u2013 example of existing SAP-delivered report

    Do you intend to use a report with 240 columns? I am wondering what would be the purpose of such a large column report.
    Still if needed, you could try with painter itself, may be using page break perhaps. I am not sure of the limitation to the number of column.

  • MCSI report for actual/normal sales and scrap scales

    Hi all,
         How do i can configure sales value and net value of the Scrap sales should be Zero in MCSI report(SIS)? because its not a actual/normal sales so it should not appear in the MCSI report or it should show Zero values and For Actual/normal sales MCSI report should show exact values as per the transation captured by the system.
    Please explain me in terms of Tables and fields and Configuration settings need to be changed in Pricing Procedure.
    Thanks and Regards
    Swamy HP

    I resolved it. Thanks for your valuable inputs.

  • Period Balance Report for Actual/ Commitment only

    Hi,
    Do we have any report for getting Periodic balance for cost Centre Actual and commitment Balances.
    Regards,
    Venkat

    If there is not a specific YtD report, then it is easy to create one: Using the report painter, copy the existinf report, and amend the columns to reflect not the current month, but from the 1st period to the current month.

  • Report for actual/planed sales

    hi everyone,
    I am ravi working as sap bw consultant
    can any one explain the step by step procedure to create a report to get
    actual/planed sales per month and per year.
    And also some real time errors and how to rectify them. please
    help me in this regard.
    Thanks all,
    ravi

    Hai,
    Ravi,
    You create one cube for plan data and create another cube for actual data.
    Create a multiprovider and give comparision report. this is betterway.
    Or you can also load actual and plan data in one cube but you need to maintain one character like version to seperate atual and plan data.(OR)
    Create a basic cube and transaction cube.Go to the transaaction cube Rght click on the cube select the Switch on the traction cube you get 2 radio buttons where u can load and planning on the cube .When u select on planing u can't load the data but wen u select the Load Radio button u load the data and compare with basic cube.To be presice it is the concept of BPS(Business Planning Simulation) part of SEM.
    Thanks,
    Subramanyeswar rao

  • Activity reports for actual activity

    I like the new reports feature of the VLM, but would it not be cool if it was able to trend the actual programming activity of the users, and not just how long the license was checked out? 
    Let's say that if there was no activity (defined for example as not even a mouse movement in any of the IDE's windows) for n minutes, then the system would unregister the license as in use (license-wise it could still be checked out, but not as in activity).
    Sure, we could use other tools for this, and some people might want to make it optional - but as long as the report feature is there already, would not this little change make it quite a bit more interesting?
    MTO

    Thanks for your feedback! I agree that this data would provide a potentially interesting report for admins. This would be a feature of the application software itself (like LabVIEW, CVI, etc).
    I will record this idea as a suggestion for those teams.
    - Michael

  • Standard SAP reports for Actual / Budget

    Hi Friends ,
    Is there any reports available in standard sap with relevant to Actual / Budget . I found this tcodes:
    S_ALR_87013648     
    S_ALR_87013019
    In addition to above two, any other reports available ?
    Thanks in advance.
    Best Regards
    Ajay

    Hi Friends,
    Thanks you very much for your kind co-operation.
    Non of the above reports not exactly matching for my requirement. It seems some customized report has to be make , could any one let me know what are the tables get updated when do the transaction with relevant to Actual Vs. Budget?
    I mean from SAP transparent tables, where can I get the monthly , yearly data for "Actual" fig.?
    In the similar manner where can i get the monthly , yearly transacton data for "Budget" fig.?
    Please let me know the transparent tables ....
    Best Regards

  • Report for actual cost of WBS, Profit center wise

    Hi Experts,
    Do we have any standard report that gives the actual cost of WBS/Project with Profit center wise.
    Thanks,
    Krishna

    Hi,
    Thanks for your solutions.
    But I m looking for the Profit center in the report (display screen), not in selection screen.
    My scenario is like, the cost was posted to WBSE with X profit center/cost center in January, now I changed the profit center to Y for the same WBSE and posted.
    Want to see thru which PC I have posted to WBSE and how much. So that I can reversal.
    Thanks again.
    Krishna.
    Edited by: krishna.gujju on Jul 8, 2011 6:56 PM

  • Need a report for actual cost by WBS element by month

    Hello all,
    I am looking for a report that will give me the total costs charged to a series of of WBS elements by month. Does anybody know if such a report can be run and what the transaction number of this report would be?
    Thanks

    Hello Stacy,
    Thank you for your help.
    I tried the S_ALR_87100185 report as you instructed but I cant get it to display as I would like to see it. What I need the report to do is display actuals by month and WBS elemnts from January through August. However the report cuts off at the May period. Does anybody have a workaround so I can see the charges from January through August?
    Thanks

  • Report for Actual/plan Comaprision

    Hi
    We have defined power consumption as one of the activity types in KP06 and given a rate for the same. Is there a standard report which would give a difference between the plan and actual data in terms of Aty (KWH Consumed) and Value (In INR) for the same in PP
    Regards
    Vaibhav

    Hi Vaibhav,
    For individual orders you can go to co03, in header click on Go To - Costs, here you can branch to analysis & modify the layout to get the details of plan / actual as per your need.
    Also you can check via KKBC_HOE or you can use
    Variance Analysis
    Plant / Actual
    s_alr_87013145 - cumulative
    s_alr_87013146 - periodic
    WIP Analysis
    Plant / Actual
    s_alr_87013151 - cumulative
    s_alr_87013152 - periodic
    Planned Costs
    s_alr_87013154 - cumulative
    s_alr_87013155 - periodic
    Actual Costs
    s_alr_87013157 - cumulative
    s_alr_87013158 - periodic
    Hope the above helps.
    Regards,
    Vivek

  • Report for Actual PO Qty and Received Qty

    Hi,
    Is there any standard report which have the information of PO details like how much quantity PO have and how much received against the total PO Quantity.
    Regards..

    Hi,
    Use Scope of List  as " ALV ".
    Selection Parameters -- WE101
    Pass on the list of PO's for which you wish to check as a i/p data.
    Regards
    Ramesh Ch

  • Report for asset: invoice posted by vendor

    Hello Gurus,
    My users want to have a report to extract the list of vendor invoices posted on assets. But I am Not able to find any such kind of table relationship in which Asset details & vendor Details both are maintained.
    While creation of Asset They didn't maintained the vendor details.  So the Vendor details are not available in Asset Master Tables .
    So please if you people can help me out.

    Hi
    Can you  please specify the report name.
    regards
    Navin

  • Inventory Report for actuals  and  projected?

    Hi,
    currently i am doing APO-BI Project. I have a requirement to extract the Opening stock from ECC and Projected(Forecasted) Opening stock from APO.
    both are 2 different key figures 1 is from ECC and another one is from APO. I need to display in Bex report in
    say for example, if we have 53 weeks in a year. if i run the report in week 25, in the bex report it has to display the Opening stock values from ECC up to week 25 and remaining weeks till 53 weeks it has to display Projected Opening stock values in the same line.
    plz provide me the logic to achieve this report.
    regards
    venuscm

    Hi,
    Create Two Cubes one is for APO and another is 0IC_C03 for Inventory. then build a MP on both and create reports.
    Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
    Use :See the steps how to load the data to 0IC_C03.
    Treatment of historical full loads with Inventory cube
    Setting up material movement/inventory with limit locking time
    If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
    0VALSTCKVAL      " For Value
    0VALSTCKQTY      " For Qty
    0CALMONTH        " For Month
    Use the above combinations in New Selections in columns and go it.
    For Qty Opening:
    New Selection, drag and drop following InfoObjects
    0VALSTCKQTY     " For Qty
    0CALMONTH       " For Month and restrict with less then or equalto option variable (single value, user input)  and set the offeset
                    " value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
    For Qty Closing:
    New Selection, drag and drop following InfoObjects
    0VALSTCKQTY    " For Qty
    0CALMONTH      " For Month and restrict with less then or equalto option variable (single value, user input) .
    In the same way build for Value and other Keyfigures on 0IC_C03.
    And
    Drag & drop
    0MATERAIL
    0PLANT  " Give some Input Variable.
    Thanks
    Reddy

Maybe you are looking for

  • In the new Lion, can't make text larger in Message List

    Just started using Lion. In Mail, I can enlarge the font in the message for viewing, but not in the message list on the left hand side of the creen. What am I missing? Next question-- Mail isn't allowing me to add an acount even though that account i

  • Why do YouTube videos lag when I switch to 720p?

    Hi guys, I'm extremely annoyed by the fact that everytime I watch a YouTube video and switch the quality from a standard 480p to a 720p or 1080p HD, the video gets lagged out. After restarting my Macbook Pro, it gets better and in a short while when

  • Idoc to jdbc to bpm

    Hi I have a scenario. invoice coming from sap R/3 and get 10 fields from Sql Server depending on the soldto or billto. then it has to go to bpm depending on the business reles. please help me this one how can we do the synchronus from sql server and

  • Bug of JSF spec?

    I am not good at English. But but... please hear my JSF Problem. <h:form>     <h:inputText id="input1" required="#{true}"/>     <h:message for="input1"/>     <h:inputText id="input2" value="#{testBean.value}">         <f:convertNumber integerOnly="tr

  • Redirection in JSP

    Dear All, I have the following requirement and I am not able to find a solution. I have four jsp files called one.jsp, two.jsp, three.jsp, four.jsp. On clicking the submit button in one.jsp, the request goes to two.jsp. two.jsp will do some processin