Report for monthly stock value

Hi SAP Gurus,
Is there any report or transaction that can show monthly stock value based on plant/GL account balance ?
Thanks for your help.
Regards,
Raj

I personally do not trust info structure data which are basis to MC.9 and MC.5
basis for MB5L is audit relevant data, while info structures are only statistics.
Ideally the data should match, but if for some reason the update to the info structure fails, then the financial posting still happens as they are technically not in the same LUW.

Similar Messages

Report for shedule vs supply and report for opening stock at back date.

Dear All Guru,
please can anybody reply me is there any standard report is available for
1) Report for shedule vs supply
2) and report for opening stock at back date.(ex- opening stock at last month 16th july or two months back on 10th may
pl suggest if any standard report is available or how we can data for this
Regards,
Vimlesh

Hi,
To see the opening stock at a particular date use T.Code: MB5B,
To see the scheduled quantity & delivered quantity use table EKET with the filed names MENGE & WEMNG.
Regards,
Prabu

Table name for opening stock value

Hi,
Can some body tell me the table name & the field name for opening stock value,
(This is when you pass the date through LSMW at initial stage and it gets sits in which table)
For ex. MB5B
rgds
Sonu

There are many stock tables in SAP.
if you load unrestricted use stock with value, then the quantity is going to MARD, quantity and value to MBEW.
if material is batch managed, then stock per batch is going to MCHB, but still MARD and MBEW are updated.
if you load non-valuated stock (material type UNBW), then only MARD is updated, no MBEW entry.
and much more cases for consignment, sales order stock etc etc.
If you try to find the values more than a month after the upload, and your materials had movements, then the old stock quantity at period closing is transfered to the history tables MARDH, MBEWH.
If you load in the beginning of a month, then SAP calculates the opening stock by using the end of period stock and add/subs the material movements.Then you will not find the opening stock as a single number in any table.

Inventory Report For Special Stock (Project Stock)

Dear Sir,
We are in Make -To - Order scenario and procure the material against the WBS element . For getting the Inventory List , we use MBBS tcode but it has following limitation :
a) It give the Stock Status as on date basis . While we need Stock Inventory on a cut off date , say on
31/Jan/2007 .
b) We are not able to get the Inventory Report , Material Group wise
I request to kindly guide me , as how to take the Inventory Report for Project Stock .
Regards
B Mittal

Hi Shailesh,
Is there any way we can include some extra fields into this MC.9 report - i tried but could not find anything. Can you please help.
Regards,
Laxmi

Report for monthly sales(sales office wise,sales group wise,plant wise)

Please send the Report for monthly sales(sales office wise,sales group wise,plant wise) with T.CODE.,

Hi
As per my knowledge there is no Standard Report in SAP based on sales office, sales group. and plant.
You may create your own report using MC18,MC21 and MC24.... Otherwise ask your ABAPer's help...
Muthu

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

Custom Report for the Stock and Stock value for a specific date

Hi SAP Gurus,
Is there any SAP standard t-code or any logic to get the transcations (additions (for example: Purchases) and subtractions (Sales) to the inventory) for a particular materials in a plant and with Total Stock and also Total Stock value when that particular transaction happened?
Our system is R/3 4.7
I looked at the MB5B, MBCE, MBCA, MC44, MB51 and some other standard T-codes but could not find the total stock value at the time of Transaction happened.
The history tables MBEWH and MARDH are updated after the month end closing procedures, right, which means I will have the inventory value changing every month if material has Price "S".
Thank you,
-Harter

Hi Harter,
Unfortunately, you cannot see in a single tcode the value of stock and stock quantity on a specific date. As you yourself have pointed out, we only have to make use of the history table MBEWH, MARDH for the month wise stock quantity and value. Along with that you should also make use of the table MBEW to take teh stock quantity and value. So the total value of stock on a particular date will be
Stock qnty = MBEWH value until the previous month (for teh specific valuation class, period etc) + MBEW value for the present date.
But this will nto work out if you want to find out teh stock quantity and stock value on a past date basis. For past data, only m onthwise data is available. For this anyway you can refer to MC.1 and so on reports.

Report for monthly/ weekly stock analysis

Hi,
Could anybody please let me know the transaction code for the following.
-> I would like to call a report for stock analysis (quantity basis not stock value), What I want is to call up figures of monthly / weekly usage over 6 months.
Thanks in advance

Hi ,
Pls try MC45.
Enter only one object to analyse either : plant/ pur org/sales org
Input your period to analyse
Report shows consumed materials with stock value and qty ..Click double line & triple line tabs to get more details.
thnks
nandu

Report for Project Stock Balances as on a previous Date

Hi PS Gurus !!
We need to have a Report that gives the Project Stock Balances and Values as on a Past Date. The system gives a Current Status Report, but is there a Report that gives the Values for Past Date. This is a report for the Auditor's Interest.
Secondly, we would also need a Report on the Movement of Project Stock in the past periods. Is this possible ??
Thanx !!
Ravi

Hi Everyone !!
I would once again request all of you to kindly answer to my question, as I need a solution to this urgently.
Thanx & Regards,
Ravi Kumar

Report for Monthly Quantiy sold by Customer (SOLD TO PARTY)

Hi Gurus
I had asked this question many times but no answer I got from the forum , I want to create a report which should show quantity , uom sold to customer(sold to party) by each month and plant (werks).
I want to display monthly sales in the report when plant and delivery date is selected ( month = jan,feb,mar,apr,may......) and each quantity must display under jan,feb,mar,apr respectively.
Can anyone help me please , I am still struggling with this stuff.
Thanks in advanced
Regards
PE

Hi Aatish
I have developed the report for monthlywise quantity sold to party
but it is giving some trouble in the calculation where there is zero value it is taking the above value and displaying in the report but when I search individually with sold to party it is comming correctly
can you check my source and comment on it please
REPORT soldtoparty
line-size 170
line-count 65 no standard page heading.
TABLES : kna1,VBRP,vbrk.
DATA:BEGIN OF itab OCCURS 0,
kunag like VBRK-KUNAG,
name1 like kna1-name1,
werks LIKE vbrp-werks,
vbeln LIKE vbrp-vbeln,
fkdat LIKE VBRK-FKDAT,
vrkme LIKE vbrp-vrkme,
fkimg LIKE vbrp-fkimg,
total like vbrp-fkimg,
END OF itab.
DATA: BEGIN OF itab1 OCCURS 0,
fkdat(2) TYPE c,
kunag like VBRK-KUNAG,
name1 like kna1-name1,
werks LIKE vbrp-werks,
vbeln LIKE vbrp-vbeln,
vrkme LIKE vbrp-vrkme,
fkimg LIKE vbrp-fkimg,
total like vbrp-fkimg,
END OF itab1.
DATA : BEGIN OF itab2 OCCURS 0 ,
fkdat like VBRK-FKDAT,
fkimg like vbrp-fkimg,
kunag like VBRK-KUNAG,
name1 like kna1-name1,
vrkme like vbrp-vrkme,
jan LIKE vbrp-fkimg,
feb LIKE vbrp-fkimg,
mar LIKE vbrp-fkimg,
apr LIKE vbrp-fkimg,
may LIKE vbrp-fkimg,
jun LIKE vbrp-fkimg,
jul LIKE vbrp-fkimg,
aug LIKE vbrp-fkimg,
sep LIKE vbrp-fkimg,
oct LIKE vbrp-fkimg,
nov LIKE vbrp-fkimg,
dec LIKE vbrp-fkimg,
TOTAL like vbrp-fkimg,
END OF itab2.
TOP-OF-PAGE.
WRITE:/50(40) ' CUSTOMER SOLD BY QUANTITY' CENTERED   ,2 'Page', SY-PAGNO.
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED on.
WRITE:/2 SY-DATUM COLOR 3, SY-UZEIT .
   "WRITE:/1 S903-SPMON ."p_yearf.
ULINE.
"CENTERED.
skip.
"FORMAT COLOR COL_HEADING.
ULINE.
FORMAT COLOR 3.
WRITE:/1 SY-VLINE,
    0 'PARTY' ,10 SY-VLINE,
    11 'NAME' ,40 SY-VLINE,
    41 'JAN' centered , 50 SY-VLINE,
    51 'FEB',60 SY-VLINE,
    61 'MAR',70 SY-VLINE,
    71 'APR',80 SY-VLINE,
    81 'MAY',90 SY-VLINE,
    91 'JUN',100 SY-VLINE,
    101 'JUL',110 SY-VLINE,
    111 'AUG',120 SY-VLINE,
    121 'SEP',130 SY-VLINE,
    131 'OCT',140 SY-VLINE,
    141 'NOV',150 SY-VLINE,
    151 'DEC',160 SY-VLINE,
    161'TOTAL',170 SY-VLINE.
FORMAT COLOR 3 on.
ULINE.
END-OF-PAGE.
data wa_itab1 like itab1.
DATA : mm(2) TYPE c,
value type p decimals 2,
total type p decimals 2,
sum1 type p decimals 1,sum2 type p decimals 1,sum3 type p decimals 1,
sum4 type p decimals 1,sum5 type p decimals 1,sum6 type p decimals 1,
sum7 type p decimals 1,sum8 type p decimals 1,sum9 type p decimals 1,
sum10 type p decimals 1,sum11 type p decimals 1,sum12 type p decimals 1,
sum13 type p decimals 1,
t_s LIKE vbrp-fkimg.
"g_total like vbrp-fkimg.
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS: p_yearf TYPE SPMON,
p_yeart type SPMON.
SELECT-options:
                p_kunag for VBRK-KUNAG , "no-extension no intervals,
                s_werks for vbrp-werks no-extension no intervals obligatory,
                s_vrkme for vbrp-vrkme no-extension no intervals obligatory.
"p_matnr for vbrp-matnr no-extension no intervals,
"p_augru for vbrp-augru_auft no-extension no intervals,
"p_vbeln for vbrk-vbeln no-extension no intervals.
RANGES : p_fkdat FOR sy-datum.
RANGES: r_date FOR sy-datum.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS: NRW RADIOBUTTON GROUP g1,
MWD RADIOBUTTON GROUP g1,
RWS RADIOBUTTON GROUP g1,
EDU RADIOBUTTON GROUP g1,
Standard RADIOBUTTON GROUP g1 default 'X'.
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk.
start-of-selection.
break developer.
case 'X'.
when mwd.
CONCATENATE p_yearf(4) p_yearf+4(2) '01' INTO p_fkdat-low.
concatenate p_yeart(4) p_yeart+4(2) '01' into p_fkdat-high.
p_fkdat-sign = 'I'.
p_fkdat-option = 'BT'.
CALL FUNCTION 'RE_LAST_DAY_OF_MONTH'
EXPORTING
i_datum = p_fkdat-high
IMPORTING
e_tt = p_fkdat-high+6(2).
APPEND p_fkdat.
*start-of-selection.
SELECT *
from VBRK
INNER JOIN vbrp ON vbrk~vbeln = vbrp~vbeln
INNER JOIN kna1 on vbrk~kunag = kna1~kunnr
INTO corresponding fields of TABLE itab
where
vbrp~werks in s_werks and
VBRK~KUNAG in p_kunag and
VBRP~vrkme in s_vrkme and " 'M3' and
VBRK~fkdat in p_fkdat order by KUNAG.
*left outer join kna1
**from S903 INNER JOIN kna1
*ON VBRKKUNAG = kna1kunnr
*INTO corresponding fields of TABLE itab
*where
*"vbrp~werks in s_werks and
*VBRK~KUNAG in p_kunag and
*VBRP~vrkme in s_vrkme and " 'M3' and
*VBRK~fkdat in p_fkdat order by KUNAG.
LOOP AT itab.
mm = itab-fkdat+4(2). " Monthly for Ageing
clear itab2.
Read table itab2 with key KUNAG = itab-KUNAG.
*IF SY-SUBRC EQ 0.                      " Record for Customer exists so modify existing record updating the quantities
     PERFORM itab2_rec USING 'M' mm.
ELSE.                                  " Record for Cusotmer does not exist so Append a new record for Customer
     PERFORM itab2_rec USING 'A' mm.
ENDIF.
itab1-fkdat = itab-fkdat+4(2).
*itab1-vrkme = itab-vrkme.
itab1-KUNAG = itab-KUNAG.
itab1-name1 = itab-name1.
itab1-fkimg = itab-fkimg.
APPEND itab1.
clear itab1.
ENDLOOP.
SORT itab1 BY KUNAG fkdat name1.
"delete adjacent duplicates from itab1.
LOOP AT itab1.
move itab1 to wa_itab1.
AT NEW KUNAG.
t_s = 0 .
ENDAT.
t_s = t_s + itab1-fkimg .
AT END OF KUNAG.
mm = itab1-fkdat.
"break angle.
IF SY-SUBRC = 0.                     " Record for Customer exists so modify existing record updating the quantities
CASE mm.
                     " Record for customer does not exit so append a new record for customer
WHEN '01'.
itab2-jan = t_s .
itab2-KUNAG = wa_itab1-KUNAG.
itab2-name1 = wa_itab1-name1.
itab2-total = wa_itab1-total.
    sum2 = sum2 + itab2-jan.
APPEND itab2.
WHEN '02'.
itab2-feb = t_s .
itab2-KUNAG = wa_itab1-KUNAG.
itab2-name1 = wa_itab1-name1.
itab2-total = wa_itab1-total.
    sum2 = sum2 + itab2-feb.
APPEND itab2.
WHEN '03'.
itab2-mar = t_s .
itab2-KUNAG = wa_itab1-KUNAG.
itab2-name1 = wa_itab1-name1.
itab2-total = wa_itab1-total.
    sum3 = sum3 + itab2-mar.
APPEND itab2.
WHEN '04'.
itab2-apr = t_s .
itab2-KUNAG = wa_itab1-KUNAG.
itab2-name1 = wa_itab1-name1.
itab2-total = wa_itab1-total.
    sum4 = sum4 + itab2-apr.
APPEND itab2.
WHEN '05'.
itab2-may = t_s.
itab2-KUNAG = wa_itab1-KUNAG.
itab2-name1 = wa_itab1-name1.
itab2-total = wa_itab1-total.
   sum5 = sum5 + itab2-may.
APPEND itab2.
WHEN '06'.
itab2-jun = t_s .
itab2-KUNAG = wa_itab1-KUNAG.
itab2-name1 = wa_itab1-name1.
itab2-total = wa_itab1-total.
sum6 = sum6 + itab2-jun.
APPEND itab2.
WHEN '07'.
itab2-jul = t_s .
itab2-KUNAG = wa_itab1-KUNAG.
itab2-name1 = wa_itab1-name1.
itab2-total = wa_itab1-total.
    sum7 = sum7 + itab2-jul.
APPEND itab2.
WHEN '08'.
itab2-aug = t_s .
itab2-KUNAG = wa_itab1-KUNAG.
itab2-name1 = wa_itab1-name1.
itab2-total = wa_itab1-total.
sum8 = sum8 + itab2-aug.
APPEND itab2.
WHEN '09'.
itab2-sep = t_s .
itab2-KUNAG = wa_itab1-KUNAG.
itab2-name1 = wa_itab1-name1.
itab2-total = wa_itab1-total.
    sum9 = sum9 + itab2-sep.
APPEND itab2.
WHEN '10'.
itab2-oct = t_s .
itab2-KUNAG = wa_itab1-KUNAG.
itab2-name1 = wa_itab1-name1.
itab2-total = wa_itab1-total.
    sum10 = sum10 + itab2-oct.
APPEND itab2.
WHEN '11'.
itab2-nov = t_s .
itab2-KUNAG = wa_itab1-KUNAG.
itab2-name1 = wa_itab1-name1.
itab2-total = wa_itab1-total.
sum11 = sum11 + itab2-nov.
APPEND itab2.
WHEN '12'.
itab2-dec = t_s.
itab2-KUNAG = wa_itab1-KUNAG.
itab2-name1 = wa_itab1-name1.
itab2-total = wa_itab1-total.
sum12 = sum12 + itab2-dec.
APPEND itab2.
itab2-total = itab2-jan + itab2-feb + itab2-mar + itab2-apr + itab2-may + itab2-jun + itab2-jul + itab2-aug + itab2-sep
+ itab2-oct + itab2-nov + itab2-dec .
total = sum1 + sum2 + sum3 + sum4 + sum5 + sum6 + sum7 + sum8 + sum9 + sum10 + sum11 + sum12.
IF MM = 'A'. " Mode for Append
    APPEND itab2.
ELSE.             " Mode for Modify
    itab2-KUNAG = itab1-KUNAG.
    itab2-name1 = itab2-name1.
    "MODIFY itab2 WHERE kunag = itab1-kunag.
ENDIF.
"loop at itab2 .
on change of itab2-KUNAG." ,itab2-name1,itab2-jan,itab2-feb,itab2-mar,itab2-apr,itab2-may,itab2-jun,itab2-jul,itab2-aug,itab2-sep,itab2-oct.
          WRITE:/1 SY-VLINE,
            itab2-KUNAG   under   'PARTY' LEFT-JUSTIFIED ,0 SY-VLINE COLOR 2,
            itab2-name1   under     'NAME' LEFT-JUSTIFIED ,10 SY-VLINE,
            itab2-jan DECIMALS 1 under    'JAN' LEFT-JUSTIFIED,40 SY-VLINE,
            itab2-feb DECIMALS 1 under    'FEB' LEFT-JUSTIFIED,50 SY-VLINE,
            itab2-mar DECIMALS 1 under    'MAR' LEFT-JUSTIFIED,60 SY-VLINE,
            itab2-apr DECIMALS 1 under    'APR' LEFT-JUSTIFIED,70 SY-VLINE,
            itab2-may DECIMALS 1 under    'MAY' LEFT-JUSTIFIED,80 SY-VLINE,
            itab2-jun DECIMALS 1 under    'JUN' LEFT-JUSTIFIED,90 SY-VLINE,
            itab2-jul DECIMALS 1 under    'JUL' LEFT-JUSTIFIED,100 SY-VLINE,
            itab2-aug DECIMALS 1 under    'AUG' LEFT-JUSTIFIED,110 SY-VLINE,
            itab2-sep DECIMALS 1 under    'SEP' LEFT-JUSTIFIED,120 SY-VLINE,
            itab2-oct DECIMALS 1 under    'OCT' LEFT-JUSTIFIED,130 SY-VLINE,
            itab2-nov DECIMALS 1 under    'NOV' LEFT-JUSTIFIED,140 SY-VLINE,
            itab2-dec DECIMALS 1 under    'DEC' LEFT-JUSTIFIED,150 SY-VLINE,
            itab2-Total DECIMALS 1 under 'TOTAL' LEFT-JUSTIFIED,160 SY-VLINE COLOR 3,
            170 SY-VLINE COLOR 3.
            uline.
"itab2-total = itab2-jan +value itab2-febitab3-maritab2-apritab2-mayitab2-junitab3-julitab2-augitab2-sepitab2-octitab3-nov+itab2-dec).
"itab2-total = sum(itab2-jan) .
endon.
"endloop.
ENDCASE.
ENDIF.
"ENDFORM.
ENDAT.
ENDLOOP.
ENDCASE.
write: sum1 DECIMALS 1 under    'JAN' LEFT-JUSTIFIED,40 SY-VLINE,
         sum2 DECIMALS 1 under    'FEB' LEFT-JUSTIFIED,50 SY-VLINE,
         sum3 DECIMALS 1 under    'MAR' LEFT-JUSTIFIED,60 SY-VLINE,
         sum4 DECIMALS 1 under    'APR' LEFT-JUSTIFIED,70 SY-VLINE,
         sum5 DECIMALS 1 under    'MAY' LEFT-JUSTIFIED,80 SY-VLINE,
         sum6 DECIMALS 1 under    'JUN' LEFT-JUSTIFIED,90 SY-VLINE,
         sum7 DECIMALS 1 under    'JUL' LEFT-JUSTIFIED,100 SY-VLINE,
         sum8 DECIMALS 1 under    'AUG' LEFT-JUSTIFIED,110 SY-VLINE,
         sum9 DECIMALS 1 under    'SEP' LEFT-JUSTIFIED,120 SY-VLINE,
         sum10 DECIMALS 1 under    'OCT' LEFT-JUSTIFIED,130 SY-VLINE,
         sum11 DECIMALS 1 under    'NOV' LEFT-JUSTIFIED,140 SY-VLINE,
         sum12 DECIMALS 1 under    'DEC' LEFT-JUSTIFIED,150 SY-VLINE,
         sum13 DECIMALS 1 under 'TOTAL' LEFT-JUSTIFIED,160 SY-VLINE COLOR 1.
uline.
regards
Piroz

SAP reporting for Month end reports for Pension (TP, USS, LGPS)

Hi
I wonder if anyone can help me. We have just had SAP installed and are experiencing problems with month end reports for Pension reporting. Can anyone point me in the right direction of the reports? I have managed to extract some reports but they hold year to date values, not the current month and I am having problems with extracting the monthly contributory salary.
Many thanks in advance
Pia

It's possible to re value asset records but the intent is not for currency adjustments. That is almost always done in consolidations.
It's possible to depreciate based on the current exchange rate using 95314 but this is considered a modification. I've rarely seen it implemented.
-nathan

Report for replacement stock to be recived from vendor

Hi
I HAVE ONE ISSUE ON ABOUT VENDOR REPLACEMENT STOCK REPORT
EX:.. i have done GR for material-A qty 100...and ihave done MIRO for this ..pur.order..
after 20 days i have return the materai-A ..qty 25..(without cancel the MIRO) with movement tuype 122..but this material should be return from vedor.(subsequent deliver).after some days or weeks ..( bcoz money has already paid to vendor)...like this we many materials ..
for this... i want report for replacement material will be recived from vendor
regards
sesidhar

Hi
already i have done MIRO..
then return to vendor qty 25..(through MIRO...w/o creadit memo
thne again recive the replacement material ..through MIGO (subsequent delivery)
in this case ..need to create credit memo..?
if yes.. pls...send me procedure.
regards
sesidhar

Report for WIP stock

Hi Friends
The requirement is to generate a report showing the stock of the components in the semifinished stage.
For eg to manufacture a component "X" there are some 6 operations 0010,0020,.......0060(total lead time is around 3months). Since the lead time is long & the mfg of this component may be halted at any operation (eg after completing operation 0010,0020,0030) & kept in store because of some capacity constraints and the balance operation 0040 to 0060 may be done at a later point
of time to get the finished component "X".
The client needs to know the stock of this semifinished component "X' like
Material PrOrNo PrOrdqty Op0010 Op0020 Op0030 Op0040 Op0050 Op0060
X       10000010      10           -             5            3           -            2
X       10000055        5          2             -             -           -            3
Pls suggest the best method to achieve this.
Thanks in advance
Karthik

Karthik,
Try to explore the option of using Storage location resource, and still I think you need to have a Custom report to get the data required by you.
<b>
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/8b/d7ef02d08711d2b4c0006094b94273/frameset.htm">Link to Storage Location Resource</a></b>
Regards,
Prasobh

Regarding the report for vendor stock

Hello all,
This is regarding the Subcontracting scenario. We have requirement of transferring the stock of material to Vendor by using 311 Q as the tye child material is in the project stock. In
However the customer would like to have a report in which we can see the stock provided to vendor ' Vendorwise or PO wise" .
Kindly suggest the solution.
Thanks & regards,
Sudhir

Hi
The stock monitoring for SC stocks at vendor can be done uswing ME2O report.
If you want to see the total stocks available at vendor then use report MBLB

Report for monthly pay components for the employees

Hai Group
I want a report for all the employees monthly total wage and each individual components like basic, hra, medical, special allow etc, and also for deductions like pf, esi, pt, tax, etc.
Is standard report available or we need to go for a development for this?
Plz let me know incase the standard report available, where and is it possible to download to an excel file?
thank you

Hi Friend
In Wage type reporter screen, you can find a place called OTHER SECTIONS, next to that you can see the wage type column and down below you can find a place for object selection. Click on object section, you have find the personnel number in u2018Available objectsu201D move that to u2018Objects Selectedu2019 and try executing the report. Save this as a variant so that every time you donu2019t need to select the personnel number.
Hope this will solve your problem.
Regards
Santhosh.S

Report for monthly stock value

Similar Messages

Maybe you are looking for