Report Generation Toolkit 1.01 and broken arrow

Hi,
I desperately need help because I need to build my application tomorrow morning for our production department and have trouble with the report toolkit.
I am aware of your knowledge base entry regarding this problem. I already deinstalled and reinstalled the toolkit (version 1.0.1 for LV 6), and I checked the windows registry entries. Still, after mass-compile, the report generation toolkit VIs are not executable (broken arrow, invalid property node). I have LabVIEW 6.02, 7.0 and 7.1 on my computer and I am using the report generation toolkit version 1.0.1 with LabVIEW 6.02 and version 1.1 with LabVIEW 7.1. The application that I need to build is written in LabVIEW 6.02. What else can I do to get rid of the broken arro
ws?
Thanks in advance for your fast answer....
Gabs

Hi,
the problem is the following: during the build error 1003 occures at ....\internal.llb\Word_New_Page.vi. Possible Reasons: LabVIEW: The VI is not executable. When I open my main VI, I see no broken arrow. When I force a mass-compile (Strg+Shift+Run button), the broken arrow appears suddenly. I can then see the following error message: Word Easy Text.vi is broken because Word Format Text.vi is broken because the Property Node Range\Style calls an invalid property. Actually, the property nodes in these VIs have NO properties and the invoke nodes NO methods.
I know now that this is due to the fact that I need to build this application for a computer on which Word97 is running, so I installed the Report Generation Toolkit for Word97. But - on my developme
nt computer where LabVIEW is installed Office XP is running, not Office97. If I install the Report Generation Toolkit for OfficeXP, no error occurs during the build, but the executable does not run properly on the target computer (when calling Word97).
Question for NI: How am I supposed to build an executable using Microsoft Word Report Generation Functions if the target computer has Word97 installed but the development computer has WordXP installed???
Please help,
thanks,
Gabs

Similar Messages

Report Generation Toolkit on Vista and Office 2007

Hi,
I am trying to install Report Generation Toolkit 1.1.2 on LabVIEW 8.5 on a computer with Vista Business and Microsoft Office 2007.
The installation is starting, but I am receiving a message saying that "Microsoft Office 2000 or later is not detected on the computer"
The installation stops and the toolkit is not installed.
What can I do ?
Tom

Tom SAVU wrote:
Hi,
I am trying to install Report Generation Toolkit 1.1.2 on LabVIEW 8.5 on a computer with Vista Business and Microsoft Office 2007.
The installation is starting, but I am receiving a message saying that "Microsoft Office 2000 or later is not detected on the computer"
The installation stops and the toolkit is not installed.
What can I do ?
Tom
The Report Generation Toolkit does probably not support Office 2007 yet. This is because the Office ActiveX interface used to change with each version and the Report Generation Toolkit comes with specific libraries for each of the Office versions it supports. With the wrong office version the Report Generation Toolkit VIs are normally broken and can't run without some more or less involved modifications.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Report Generation Toolkit Excel errors and Libraries, Classes

Hello All,
I'm using the Report Generation toolkit Excel functions to handle some data and create graphs. I'm running into problems with the Add Worksheet.vi. At the very start of the vi, it closes the reference to Shapes. Occasionally, the Close Ref will throw an error. I haven't pinned down the exact cause yet (probably an invalid reference). The error itself wouldn't be a problem. Under other circumstances I would choose to ignore it and continue on. The problem is, this is stored in a Class Library controlled by NI.
Solutions I've tried without success:
1.) Make changes, and save the new vi with another name - can't do it because it's encapsulated and the Library is password protected.
2.) Install toolkit in something other than the default folder, so I can make changes and put it under Source Control - installer doesn't allow a new path to be entered.
3.) Change the vi where it is. This works until I move the source to another computer or I update Labview. At that point I lose all my changes.
Maybe it's just my inexperience with Classes, but I just don't see an elegant solution to this. Ultimately I'd like to copy the library off to somewhere else and put it under Source Control so I can make changes and additions to it (NI folks - providing a password to unlock the lib would be helpful...). Does anyone have suggestions on how I can accomplish this?
Thanks in Advance,
Doug

Hi Ben,
Sorry about the first post. After re-reading it, it sounds more like a frustrated rant than a request for help.
I've attached a simplified vi to try to illustrate the problem I'm having. I'm running Excel 2007. Please open the vi, then open Excel Add Worksheet.vi. At the start of the vi, Close Ref for Excel.Shapes occasionally throws an error. So far, I have not been able to consistently reproduce the error, so I can't really troubleshoot it. As I recall, the error code is 1045. The error is carried through the rest of the vi, causing invalid references to be written to Excel._Worksheet and Excel.Shapes, going out to NI_report.ctl.
So, here are the issues I'm running into (other than the error itself):
1.)Short of closing and reopening the file, there is no way to recover from the error. After the error, there is an invalid reference in Excel._Worksheet. There is no vi available to regenerate references in NI_report.ctl. I could easily write a vi to start from Excel._Application and re-read them, but because NI_report.ctl is in a Class library (controlled and passworded by NI), I can't add the vi to the library.
2.) I found that I could ignore the error by wiring around it. If I disconnect Error Out from Excel.Shapes Close Ref and wire Error In from Excel.Sheets.Count to the Error In of the Close Ref, everything works fine. Under other circumstances, I'd save this with a new vi name (because functionality changed) and continue on. But, because the vi is part of a Class library (controlled and passworded by NI), I can't do this. I can save the vi with the modifications (because Excel Add Worksheet.vi is not passworded), but if I pass the source off to someone else, they will have to make the same changes on their installation of the NI Report Generation Toolkit.
Again, I can't reproduce the error with any regularity. I've run the example vi I provided a few times and everything seems to work fine. If I come up with something, I'll repost. If you (or anyone) has an idea of what could be failing or if they've seen the problem, I'd appreciate a comment.
Thanks again,
Doug
Attachments:
Excel Fail.vi ‏15 KB

Report generation toolkit conditional format - how to?

Hi
We are using the Report generation toolkit (2010 version), and have a question regarding this tool.
I see functions for setting the number format, but not a conditional format. Does this not exist?
http://zone.ni.com/reference/en-XX/help/372120A-01/lvoffice/excel_set_cell_format/
This page refers to an example which from the name sets a conditional format. However as I understand it, this example is setting a custom number, not a conditional format.

Hi,
the simplest way to do this I guess you can provide a template for your Excel sheet, where you can set the conditional format there.
From LabVIEW you can just send the values into this sheet-template.
Maybe you can try these if you want
http://forums.ni.com/t5/LabVIEW/Using-conditional-formatting-in-excel-through-LabVIEW-activeX/td-p/1...
http://forums.ni.com/t5/LabVIEW/Excel-Colour-properties-modified-via-LabVIEW/m-p/573748?query.id=218...
Regards,
Yan.

Problem with Reporte Generation Toolkit for Microsoft Office 2010

When I use the Report Generation Toolkit (LabVIEW 2010), and Office 2010, the tables generated are bad.
In office 2007 in the tables are correct.
Someone can help me solve this problem?

The solution referenced in your post does not actually workas far as I can tell... at least for LV2011 and Office2010 on Win7
Am I missing something here?
Attachments:
Testbench_ReportGen Table_BUG.vi ‏10 KB

Problem writing to excel file using report generation toolkit

hello everyone, i have this report generation toolkit... and i want to output DAQmx Analog I/P data on to an excel sheet. the DAQmx is programmed to collect
data at 3samples/sec. however, when i see the excel file that Report Generation Toolkit generates, the time stamp is updated every second instead of every 0.33sec.
can anyone please help me? i am using the MS Office Report Express VI.
Now on LabVIEW 10.0 on Win7

@All, I got rid of the express VI, decided to work on the custom low level VIs instead. however, i have a new problem now...
I have a case statement wherein, the user selects if he wants to start generating a report. once the program enters tat loop, the program speed reduces!
can anyone please tell me why is it happening? i ahve attached the vi... also another question.. in this VI, i am capturing the unwanted data into the graph as I am indexin the graph input. how can i make a logic
that the graph captures the data only when I am switching the CREATE REPORT button (which is in the while loop). is there a way that I can append the data to the graph without creating a new graph every iteration? please let me know
thanks
Now on LabVIEW 10.0 on Win7
Attachments:
Untitled 7.vi ‏75 KB
Untitled 7.JPG ‏99 KB

Hide Excel Chart Legend Using LabVIEW Report Generation Toolkit or Active

Hello Eveyone:
I work on the report generation toolkit in labview and creat the report in excle. I create the chart into report but I can't hide the chart legend or change the font size using report generation toolkit.
I appriciate you guys time.
Thanks
Solved!
Go to Solution.

Howdy!
What is the version of LabVIEW and Report Generation Toolkit you are using? Have you taken a look at the LabVIEW Example Column Graph (Excel).vi
and looked at the help for Excel Insert Graph VI and Excel Set Graph Font?
Joshua B.
National Instruments
NI Services
NI Support Resources
NI Training Resources

MS Office Report (Report Generation toolkit) is not executable, Xnode broken?

Hi, I am trying to generate an excel report, and I figured it would be easier to use the MS Office report VI, but I am getting the broken arrow saying the SubVI is not executable and that the library that defines the xnode is broken... here is a screensot attached, I already uninstall and reinstall the report generation toolkit and still the same... this is what I found on NI: "This error occurs when the library that defines the XNode you used is broken. To correct this error, reconfigure the XNode." but no idea how to reconfigure xnode
Attachments:
Error.png ‏67 KB

What version of LabVIEW are you using?
What is the nature of your Report? What should it look like? What kind of data should it contain?
Can you show us some code that you've tried to use? If so, include the code as either a Snippet or as a VI attachment (so we can plug it into our own LabVIEW installations and experiment with it).
I generally find that the Report Generation Toolkit is a very easy way to generate Excel Workbooks. I work primarily with LabVIEW 2012 and LabVIEW 2014.
Bob Schor

Report Generation Toolkit and Labview 8 ?

I currently have Labview 7.1 on my computer, and Labview 8. I have installed the Report generation Toolkit 1.1.1, but when I try to open several of the excel and word vi's in labview 8, I get the error that "constants wired to case structures were changed to a hidden control to maintain compatibility with labview 7.1 and earlier". And therefore the subvi's don't run. Labview 7.1 doesn't have the toolkit installed, and I've even tried uninstalling 7.1 but nothing works. How do I fix this? Relinking to subvi hasn't work because it is not offered on any of the errored vi's or subvi's. The broken wires are going into invoke node vi's, but I don't know how to fix them. It doesn't allow me to rewire them.

If you dont want to use it in LabView 7.1, Just make a mass compile with LabView8.0 on the directory of you package.
It could solve a lots of that kind of problem.
Be sure that you do net need it with your previous version.
Benoit
Benoit Séguin
Software Designer

Report generation toolkit and signal express user step : problem of closing reference in "Stop" event

Hi all,
I'm trying to make a package of Vis to easily make Excel reports with Signal Express. I'm working on LabVIEW 8.2.1.
I'm using the report generation toolkit, so I build a .llb from my project which contains all the hierarchy of my steps, but also the hierarchy of dynamic VIs called.
I have made some steps, like "Open Workbook", "Write Data", etc.
My steps run well, excepts one step : "Close Workbook".
If my "Close Workbook" step is firing on "Run" Signal Express event, I have no error, so my reference is properly closed.
But if my "Close Workbook" step is firing on "Stop" Signal Express event, I have an error "1", from "Generate Report Objectrepository.vi".
I feel that I'm trying to use a reference which has been killed in the "Stop" step...
I would like to know what exactly do Signal Express on "Stop" event and why my close function does'nt run well.
Thanks,
Callahan

Hi Callahan,
SignalExpress (SE for short) does the following on the Stop event:
1. Takes the list of parameters that SE found on your VI's connector pane, and sets the values that the user set from the "Run LabVIEW VI" configuration page, if any.
2. Then tells the VI that SE is running the Stop event by setting the Enum found on your VI's front panel. This in turn should produce some boolean values telling your VI to execute the Stop case.
3. The VI is then run, with those values and states.
4. SE checks to see if any errors where returned.
5. Since this is the Stop event, SE releases the reference to the VI which it possesses.
Questions for you would be, is the reference to your Workbook linked to a control on your connector pane, or held in a uninitialized Shift Register. If it's held in a Shift Register, SE would not be aware of it, and would not be able to affect that reference.
Hope that helps. Feel free to post your LLB if it doesn't.
Phil

Error involving Report Generation Toolkit and Labview Run Time Engine

Developed an application using LabVIEW 6.1 and LabVIEW Report Generation Toolkit for Microsoft Office 1.0.1. From there, tried to build a shared application for use with the LabVIEW Run Time Engine. The Run Time version functions properly until "New Report.vi" is called and then an error is generated, code 7, calling out "Open VI Reference in New Report.vi" could not be found. When building the application, I did include the "NI Reports Support" in the advanced installer options. The machine used for original development and application build is running Windows XP Pro and Office XP. Any suggestions??

I am having the exact same problem but with LV 6.1 and M/S WORD 2000. It appears that the "New Report.vi" is trying to open "C:\APP.DIR\Word_Open.vi" and "C:\APP.Dir\Word_Open_Document.vi" by reference. The "OFFICE 2000.TXT" says that "_exclsub.llb and _wordsub.llb must be added as support files when building an application or a dynamic link library with the application builder." I added them as Support Files and I copied them to the "C:\TESTER\" where the TESTER.EXE is and I still get ERROR 7 in "NEW REPORT.VI" at VI OPEN REFERENCE.
Do I need to make a "C:\TESTER\DATA\" sub-dir and put the support files there?
I am building on MY COMPUTER on F: Drive on a network and transporting files to the real Tester.
I displayed my App.Property of APP.DI
R at start up and it is C:\TESTER\ ! How would my application know that "Word_Open.vi" and "Word_Open_Document.vi" are actually inside the _wordsub.llb?
Any ideas ?
Greg Klocek

REPORT GENERATION TOOLKIT AND EXCEL

i have a problem with report generation toolkit and excel
the problem is:
i must read & write from a excel worksheet when this is open but when i using the report generation the worksheet is open another time
have some solution for this problem?
sorry for my english

You need to close Exel when before your VI is running. Excel can not have two instances running at the same time.
Joe

Report Generation Toolkit and Office 10 - build errors

Using LabView 2011 and Report Generation Toolkit 2011.
After installing Office 10, I would get build error for Excel-Print.Vi and Excel-SetCell.vi and build is then aborted.
2011/vi.lib/addons/_office/_excelsub.llb/Excel-Print.vi.
Says it is unable to save a vi without a block diagram.
Uninstalled Office 10 and reinstalled Office 2003 and build went thru just fine.
I can program using Excel 2003 and the compiled executable will work on another computer with Excel 2011 but once I install Office 10 on my LabVIEW computer I cannot build.
Can't believe I could be the only one to experience this. Any workarounds?

Duplicate Post

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

Error 10 when building an application in LV8 and Report generation toolkit 1.1.1

I am trying to build an application using LV8.0.1 and Report generation toolkit 1.1.1 and i get this error.
Error 10 occurred at ABAPI Dist Copy Non-VI Files.vi -> ABAPI Dist Build LLB Image.vi -> ABAPI Copy Files and Apply Settings.vi -> EBEP_Invoke_Build_Engine.vi -> EBUIP_Build_Invoke.vi -> EBUIP_Build_Invoke.vi.ProxyCaller
Any ideas?
Scientia est potentia!

Did you attempt to add the _wordsub.llb and _excelsub.llb files to the application as support files? I believe in LabVIEW 8.0 instead of adding the entire LLBs you should just add the _Word Dynamic VIs.vi and _Excel Dynamic VIs.vi as dynamic VIs. I think I've seen a similar post on the discussion forums in the past that recommended this.
If this suggestion doesn't help, please reply, and attach a simple VI and .lvproj file demonstrating the problem so I can investigate further.
Good luck,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Report Generation Toolkit 1.01 and broken arrow

Similar Messages

Maybe you are looking for