Report grouped by time not grouping by time

Hi All,
I have a report with one grouping level of a Time field and have it set to ascending "for each hour". When I run the report, it doesn't group by time instead it repeats by hour (12 am - 12am and then 12 am - 12 am) as if it's grouping by a date level which I do not have in my report. Previously this report had a date group level but I have removed the date grouping from my report.
Any suggestion why this is happening? I am using CR2008.
Thank you in advance,

Are you sure its grouped by hour, go into change group and check, looks like its grouped by AM/PM which is the category next to hour. You might have selected the wrong category by accident.
Ian

Similar Messages

"Show logging" displays the switch UP time not the Date & time

Hi,
i have cisco 2950 switch, when i type the show logging, what ever event has happend i am getting like this "26w6d: %LINK-3-UPDOWN: Interface FastEthernet0/24, changed state to down" but it is not showing the date & time when the event has occured, so every time i need to check the show version & have to see the switch up time & then i need to calculate. is there any configuration has to be done where i should get the information of the date & time in place of switch up time eg. like this...
"Sep4 4:15: %LINK-3-UPDOWN: Interface FastEthernet0/24, changed state to down"

what you could do is to enable timestamping if not already done so.
2950(config)# service timestamp debug datetime msec
2950(config)# service timestamp log datetime msec
or you can use SNMP to provide traps of the 'events' that occur on the device.
these SNMP traps will provide the date, time and trap.
what version IOS on that device? have you enabled timestamping? have you upgrade lately? perhaps an upgrade could be of assistance. i'll verify the operation on some 2950s i have to confirm if i have the same issue or not and what version is being used. i'll post the result when available.

Planned delivery time not updating real time in apo

Hi,
I have a location product which is part of the active integration model.
The location and product are both available in ECC and APO.
When i change the value of Planned delivery time in ECC, the changes do not get transfered to APO even after RIMODINI.
For e.g. the planned delivery time currently is 1 day and it is changed to 3 days, even after doing RIMODINI the changes are not reflected in APO.
Kindly suggest if somebody has come across this issue earlier.
Thanks & Regards.
Santosh Joshi

Hi Santosh,
Please check by tcode CFM5 weather material is there in IM or not .
Also check CFG1 log on R/3 and SLG1 or /SAPAPO/C3 or /SAPAPO/CQ in APO.
Please confirm.
Manish

Tasks not firing some times?

Hi Experts,
On the AD process form I have a task Get NEw Parent DN task which will compute the container field value and copies to process form container field value; there is another task container Updated. whenever process form container field value changes this task fires but it is firiing some time not firing some time what might be the reason.
Thanks in adavnace for yor help.

Ideally this should not happen, that your process task does fires randomly. Confirm that is your process from container value getting updated each time after your Get NEw Parent DN task runs successfully. The container Updated task will only fire if there is a change in the database for that value as it is based on a DB trigger. Otherwise it wont.
Thanks
Sunny

Don't have proper privilege to change the date and time. Group Policy does not work

Hello All,
I have configure group policy to change date and time only administrator. The problem is Windows XP machine cannot view the calendar but windows 7 can. So i need to view the calender for windows XP machine.
Error: you do not have proper privilege to change the date and time.
Please suggest.
Thanks

Hi Parvez,
Before going further:
I applied a VM Windows XP pro. When I logged in as a local admin, I can view the calendar from the right corner of desktop or from control
panel. However, when I logged in as a normal user account, I received the same message as yours.
For now:
I know this is not what you want. However, for normal users to view calendar, we can consider to give
Change System Time permissions to these users.
In addition, regarding this topic, the following article and thread can be referred to for more information.
You cannot set the date, time, or time zone on your computer
http://support.microsoft.com/kb/300022/en-us
Check windows calendar in XP pro without admin rights
http://community.spiceworks.com/topic/100116-check-windows-calendar-in-xp-pro-without-admin-rights
Please Note: Since the second website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Frank Shen

Calendar View: Unable filter Recurring Event by Start/End Time and Group by Recurring Event View

Hi All,
I have just found several issues with Calendar View from WSS 3.0:
Unable to filter by [Start Time] and [End Time]
I am not sure why these 2 columns doesn't appear in the Filtering column in the View Settings. The workaround found in the internet is to create calculated column for Start Time and and End Time. However, it doesn't work for Recurring Event, the calculated column will show only first recurring event Start Time.
Unable to use "Group By"
When I create new view in Calendar using format: "Standard View, with Expanding Recurring Events", there is no option to specify "Group By". Anyone knows how to show all recurring event in List view and grouped by Start Time (or any other column).
Thank you and apprecate for any idea.

Hello,
I got this from a colleague of mine so I can't take credit for it but here might be a possible workaround:
1. Create two new Columns called Start Filter and End Filter. Make these columns Calculated Columns with formulas of [Start Time] and [End Time] respectively. The columns should be of the Date and Time\Date and Time type and should not be displayed on the Default View.
2. Click Advanced Settings and choose Yes to the question "Allow management of Content Types" in the Content Types section. Click OK.
3. Click on the Event Content Type. Open the two columns created in step 1 and select "hidden" for both of them. Click OK.
4. Back at the list settings create a new view or edit an existing view. When you get to the filter section choose "Show items only when the following is true" and select the following:
Start Filter
is less than or equal to
[Today]
And
End Filter
is greater than or equal to
[Today]
5. Click OK to save the view.
6. Open the List view web part that is displaying the recently changed calendar and change the view to the newly created or newly edited view. Click Apply, OK.
-Aseem Nayar
This posting is provided "AS IS" with no warranties, and confers no rights

Report to identify sales orders not shipped on time

Hi
i have one requirement to identify the sales orders that are not shipped on time(Sales Order due).
Could you please anyone throws some hints to build a report.
Thanks in Advance
Arjun

You will have to join oe_order_lines_all and mtl_material_transactions.
The oe_order_lines_all.scheduled_ship_date will give you when the order was supposed to ship.
The "sales order issue" transaction in the mtl_material_transaction will give you the date on which the sales order issue transaction occurred.
Alternatively, you can use the dates in wsh_delivery_details and wsh_new_deliveries tables and compare them with scheduled_ship_date.
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. Help.

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. I use an external 1 TB WD My Book for backups as well as Super Duper Backups. Can anyone offer advice. Thanks.

Welcome to Apple Support Communities
You have got the "Backups.backupdb" folder in the root level of your hard drive. This is the folder used by Time Machine to save backups to, and the OS X Mavericks installer thought that your hard drive is being used to store Time Machine backups
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb" and empty the Trash. Finally, open the Mavericks installer from the Applications folder and follow the steps

Having a hard time with group by

Ok here is my table structure:
$query = 'CREATE TABLE '.$this->table_name.' ( ';
$query .= 'id number(10) NOT NULL,';
$query .= 'user_id number(6) NOT NULL,';
$query .= 'module_name varchar2(36) NOT NULL,';
$query .= 'link varchar2(150) NOT NULL,';
$query .= 'link_summary varchar2(96) NOT NULL,';
$query .= 'date_modified date NOT NULL,';
$query .= 'PRIMARY KEY (id) )';
What I am using this table for is to keep track of the last 10 links a user visits. I then display a navigation for them ect... Now what I am trying to do also is setup a who's online. Obviously each user will have a max of 10 rows. I want to return the latest row with all information. The problem I am running into is that "GROUP BY" has to group every column you query correct? Well then every row will be unique as they go to different pages in the nav. Here is a few queries I have tried with no avail so I am sorta lost. Never tried what I am doing LOL.
SELECT users.first_name || ' ' || users.last_name AS full_name, lgg_whos_online.* FROM lgg_whos_online LEFT JOIN users ON lgg_whos_online.user_id = users.id WHERE user_id IN(SELECT DISTINCT user_id FROM lgg_whos_online GROUP BY user_id) ORDER BY lgg_whos_online.id DESC
//Returns all rows obviously
SELECT DISTINCT user_id, users.first_name || ' ' || users.last_name AS full_name, lgg_whos_online.* FROM lgg_whos_online LEFT JOIN users ON lgg_whos_online.user_id = users.id GROUP BY user_id ORDER BY lgg_whos_online.id DESC
//Warning: ociexecute(): OCIStmtExecute: ORA-00979: not a GROUP BY (I think this is you have to group all columns?)
SELECT MAX(lgg_whos_online.date_modified) AS last_seen, users.first_name || ' ' || users.last_name AS full_name, lgg_whos_online.* FROM lgg_whos_online LEFT JOIN users ON lgg_whos_online.user_id = users.id GROUP BY lgg_whos_online.user_id ORDER BY last_seen DESC
//Warning: ociexecute(): OCIStmtExecute: ORA-00979: not a GROUP BY (I think this is you have to group all columns?)
Example of data in my rows would be like so.
ID      USER_ID      MODULE_NAME      LINK      LINK_SUMMARY      DATE_MODIFIED
311      1      Calendar      /index.php?module=Calendar&action=calendar_day      Home      28-DEC-06
307      1      Emails      /index.php?module=Emails&action=index      Home      28-DEC-06
341      1      Home      /index.php?action=index&module=Home      Home      29-DEC-06
347      1      Publishers      /index.php?module=Publishers&action=index&view=Reports      Home      29-DEC-06

I want to return the latest row with all information.Are you saying you want the most recent row, based on the DATE_MODIFIED column, per user?
If so, using an analytic function, row_number, will probably do the trick
create table otn_test
(id number(10),user_id number(6),module_name varchar2(36),link varchar2(150), link_summary varchar2(96),
date_modified date);
insert into otn_test values
(311,1,'Calendar','/index.php?module=Calendar&action=calendar_day','Home','28-DEC-06');
nsert into otn_test values
307,1,'Emails','/index.php?module=Emails&action=index','Home','28-DEC-06');
insert into otn_test values
(341,1,'Home','/index.php?action=index&module=Home','Home','28-DEC-06');
insert into otn_test values
(347,1,'Publishers','/index.php?module=Publishers&action=index&view=Reports','Home','29-DEC-06');
SQL> select * from
2 (select id,user_id,module_name,link,link_summary,
3   row_number() over (partition by user_id order by date_modified desc) rn
4   from otn_test
5 )
6 where rn = 1;
        ID    USER_ID MODULE_NAME
LINK
LINK_SUMMARY
       347          1 Publishers
/index.php?module=Publishers&action=index&view=Reports
Home

Report EM12C for targets not associated with (Administration) Group

Is there a report/view in EM12C for showing which targets are not associated with a Administration Group or a standard group?

For administration groups, check the Unassigned Targets report, accessible from the Associations tab.
For more details, look for the section "Identifying Targets Not Part of Any Administration Group" in the Administration Groups chapter of the EM 12c Administrator's Guide:
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/administration_group.htm#EMADM10011

Standard SAP report group 6PP3 does not exist

A user is attempting to run the transaction S_ALR_87013544 and receives the error "program 6PP3 does not exist". I used gr53 to display report groups it is not in the list.
I cannot generate 6PP3 either. I cannot create 6PP3 because it is a standard report group
Any ideas?

1.   Use GR59 IN THE <TRG> client
     a. 300 in this case
     b.     SOURCE client = 000
     c.     Leave all fields blank hit EXECUTE
     d.     Select the report group to generate from the list
        i. BPP3
       ii. Select the CONFIRM button

Time Machine reporting "The backup was not performed because an error occurred while copying files to the backup disk". Anyone have any idea what's gone wrong?

After months of working OK Time Machine is reporting "The backup was not performed because an error occurred while copying files to the backup disk". Anyone have any idea what's gone wrong?

asknrobson wrote:
Wierd!
I followed #C3 and loaded Time Machine Buddy, which was defnitely helpful, then deleted the file that the backup failed at, but after 3 more attempts I stopped deleting or excluding files as this wasn't improving the situation.
The recommendation is to exclude those files from being backed-up, not to delete them!
Updating boot support partitions for the volume as required:
Yes, that's a bit misleading. It just means that will be done, if it's required, which it isn't on your backups.
I have no idea if anything actually was changed however just when I had given up and walked away, TM has started working after a week of failing.
It probably did find and fix something. Just for reference, Disk Utiltiy usually shows the progress and repair messages in the center part of the window, but often doesn't when repairing a sparse bundle on a network. You can see the messages at any time by clicking the Log icon in the toolbar, or select Window > Show Log from the menubar.
Anyway, glad it's sorted out!

Want to upgrade RAC 10.2.0.2 database (2 instances) to 10.2.0.5. DB size is 4 TB. Contains mostly .pdf files, reports. I do not have test/upgrade environment. How much time I can expect it will take?

Want to upgrade RAC 10.2.0.2 database (2 instances) to 10.2.0.5. DB size is 4 TB. Contains mostly .pdf files, reports. I do not have test/upgrade environment. How much time I can expect it will take?
How much the upgrade process depends of database size, in this case?
I have fast boxes IBM AIX 5.3 , 64 b.

Appreciate your comments ...
Yes, sound stupid, regarding test environment, but in reality, is not that much:
-I do have "preprod" environment, (2 instances RAC) same releases of OS, OCW,RAC ... but DB size is 40 GB!!! It has all the objects as production, but (again but) it does not have physical standby, as production has. This is not that unusual, knowing that production DB grows very fast, and very large, and business do not want to keep preprod, dev, test databases same HUGE size as production is. Savings ...
-My DB upgrade depends if application running on top of it is certified for higher RDBMS release ... looks like they have some problems.
-Very encouraging sounds comment that DB upgrade does not depend that much of the DB size ...
- i do not recall from where this info came, but I have heard that R 11.* treats PDF files in different way that R10 did it ... and because of that, process of upgrading big databases which have many items of that type (pdf) can take very long. Any idea about this?
-Brian, thx ... I'm trying hard to provide DB simmilar size in UPG environment and face all possible pitfalls before I go in production...thx for youe advice. I'm relly interested in how upgrade to 11.* from 10.* traets my pdf-s ... All my TBs comming from pdfs. Everi advice will be wellcome ...

Editing the display time for grouped objects

Hello, I am having issues editing the display time for grouped items. I am using Captivate 7 and I love how now the grouped items only show as one item in the timeline because it reduces the number of rows visiblein the timeline for each object on a slide. However, now that the grouped objects no longer individually appear in the timeline, I can't make any display adjustments to the grouped objects as a whole.
Has anyone else had this issue and is there a work around? My main issue is that if I have to extend or shorten the audio for the slide, and I have assigned an advanced action to the grouped object, in order to adjust the grouped object to match the audio, I have to now ungroup, make the adjustment, regroup, then reset the advanced action using the new group name. It is frustrating and time consuming.

To expand and view the grouped items on the timeline, you need to click the Arrow symbol next to the group name. Once you expand, you can select the individual object and adjust the timings.
Alternatively, you can select the individual object of the group on the slide and adjust the timings from the Timing accordion. You can do this without ungrouping.
Sreekanth

To create new time recording groups & thier assignment

Hi All,
How to create Time recording groups. Also I want to assing the time recording groups to respective users.
Can any one help me in this? Whats the IMG path to create these time recording groups?
Please help. points assured
Thanks & reagrds,
Nithi

Hi Devi,
Thanks for your answer. We can assign the administrator in IT0001.
However my requirement is - there are two users will have access to time recording group IA1 (which will be assigned in IT0001)
However two users should be able to appove time for all 5 new time recording groups. How can we to this?
Can you please help.
thanks
Nithi

Report grouped by time not grouping by time

Similar Messages

Maybe you are looking for