Report prints Saved Data not Refreshed Data

We were running VS 2005 and using the Basic CR 2005 Basic that comes with it.  We upgraded to use CR 2008 and found MANY issues after we went live in production that were apparent in the development.  This has caused a lot of stress with us as well as our users.  Iu2019ll summarize everything we found, possible workarounds and the open issues including the Printing/Loading of Saved Data.
First, it was reported that printing changed.  It turns out when PrintMode = u2018PDFu2019 (default setting) it now asks after you choose u2018EXPORTu2019 (use to be u2018OKu2019) that it asks to Open or Save the Adobe.  When our customers were running 20 some reports at a time and we had hundreds of users, this became a nuisance for the heavy reporting users and a training issue in general for us.  With research, I found that we can change the PrintMode to be u2018ActiveXu2019.  This was much better when we were testing.  However, in Production it became a nightmare.  If the user is on a Domain that disallows itu2019s user from installing software or if the user has tight security settings, this became a nightmare.
The second thing reported was that it was exporting to the wrong format.  It was exporting into RPT format.  It turns out with CR2008, it automatically defaults to RPT and the new pop-up, doesnu2019t isnu2019t clear to the user they even have a choice (the pop-up is much prettier, but it doesnu2019t look like a dropdown anymore).  In addition, they reported it was taking twice as long to export (we think it was related to export file type now).  With CR2005 Basic, it would have no default selection and if the user didnu2019t pick one, it would remind them they need to pick one.  After much research, I found there is no way to customize the operation of the export without writing my own export.  My users 90% of the time want to export to PDF and Excel the rest of the time.  Since we arenu2019t using a CR Server like product, they NEVER will do RPT.  There is no way with CR2008 to limit this list or to default the File Format.  So now, if they forget to select the type, they get the wrong file format instead of being reminded to select one.  Since the new pop-upu2019s dropdown selection isnu2019t easily apparent, this was a BIG issue for us.  Since I have close to 300 reports on 7 websites, this will be a lot of work for me to write my own code and change all the ASPX page to use my own control.
The third thing reported was that the default name on Exporting was changed.  Export uses the ID property of the Crystal Report Viewer as the default name of a file on export.  When it replaced the viewer on all our pages, it set the ID to CrystalReportViewer1 instead of preserving the original ID.  We now have to go back and change them to what we wanted manually.  BEAWRE of this!  For our power users who wanted to export 40 reports they now have type the name in manually on all of them.  What took minutes now takes over an hour for them to do, until we can fix all the pages.
Now it was reported that some reports are showing OLD data.  It turns out there shows Saved Data from design time.  In our site, we have a parameter page which getu2019s user selected parameters, save to a session and then load the report page using the session variables, and then redirect them to the report page which on page load we set the reports parameters.  We use the CrystalReportSource using ODBC.  The report has all the connection information.  Well if the user happens to select the same parameters I used at design time, it wonu2019t pull the data from the database.  They see our test data instead which is garbage.  If they select different parameters, display the report and then go back and select the original parameters, they will get the correct data.  This can be catastrophic for us!  So I added at the beginning of the Page Load before setting parameters the following:
     If Not Page.IsPostBack Then
            CRSServiceAlertsReport.ReportDocument.Refresh()
     End If
This seemed to work.  A pain to add on every report page though when it wasnu2019t necessary before.  But then I just got called this morning and they say when they print, it prited the OLD data.  It seems the refresh pulled new data and updated the display in the viewer but the ActiveX print still used the original Saved Data!  I couldnu2019t find a solution for this.  I found switching PrintMode back to u2018Pdfu2019 worked but now I have the extra click issue again, which I described above.  I tried setting the reports u2018Discard Saved Datau2019 option but it still had the data!
In the end, had I known about all these issues I would have NEVER upgraded to CR2008.  Iu2019m still looking for help on getting by the following:
u2022     Stop using Saved Data at runtime (either on Display or Print)
u2022     Getting the PrintMode=u2019Pdfu2019 to just pull up Adobe in Open mode without prompting the user.
u2022     Remove File Type options from Export
u2022     Set the default File Type options to nothing or something I want.
Another nice feature to have would be the ActiveX control for printing to be part of the .NET Framework so users donu2019t need to download it.  Come on BO is a big company Iu2019m sure they can work with MS.  

What is that method to clear Saved Data; I looked and couldn't find it.  I never had to call one in the prior version of CR 2005 Basic in .Net.  With the .NET controls, it always refreshed the data before.  This is a change in behavior for me.
As for the Print using Adobe, with CR2005 Basic, it didn't prompt the user to Open or Save before.  This is new behavior.  It used to just open the report in Adobe in memory before without this specific prompt (it did have the first prompt for All or specific pages, but it would just open after that).  This is a change in behavior from prior versions and it has caused me several issues. 
Many users don't like change and I didn't know to communicate this to them.  They were taken by surprise.  We'll learn to live it I guess, but I would ask you just to consider, why have an option to "Save" to PDF when you choose to print?  I would think you would use Export if you want to save.  It would never hurt to add an option to allow alternatives either.
As for including with .NET Framework, it was just an idea.  I know how hard it can be working with third parties.  However, given that CR Basic comes with it, I thought it may be possible to work with them.  The better the integration the better the product is for the developers.  I was thinking the button could call JavaScript/Java to print instead of an ActiveX, or some other method.  Since I donu2019t know how the Control works, I couldnu2019t say.  It just would be nice.  I had a smiley face after that request, it didn't come out right when I saved the post.
I still don't understand why .Refresh will update the data in the viewer but printing using the ActiveX Control will still print the saved data instead of refreshed data.  Since I never used this in the prior version I don't know what it would of done or not, but it just doesn't seem right it shows one set of data, and prints another.
In addition, why the designer still saves data with the report when you state not to, I think may be a problem still.
Edited by: Thomas Johnson on Nov 21, 2008 12:26 PM

Similar Messages

  • Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

     Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer.  I can ping all
    network devices. I can connect to the internet.
    On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
    Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
    The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

    Hi,
    After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller. 
    Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
    available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
    As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
    refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
    go through beneath article for more details.
    1.  Event ID 5719 is logged when you start a computer
    2.  Netlogon 5719 and the Disappearing Domain [Controller]
    3.  Event ID 1129 — Microsoft-Windows-GroupPolicy
    Hope it helps!
    Regards.

  • Import: date is import date not shot date

    When I import photo from my camera to Photoshop Elements 10, in the import windows I have file name and import date, not shot date.
    I think shot date will be more usefull to select the photo, as I already know the import date (it is now).

    Hi,
    It does show files' shot date. It is doing so for me. Turn on the details from View menu and then check if the date shown in the main grid, is shot date or not?
    Thanks
    andaleeb

  • Can not refresh data int the report...

    Application on C#.
    Steps:
    1. Get Report without data from the database
    2. Change the dataconnections in report to the current user
    3. refresh data on the report (FilePath = TempFilePath)
    4. Resave report file with data
    5. Automatically open CrystalReportsViewer2008 and load the report
    Result
    On developer machine is allright, but on the user machine data isn't refreshed. Therefore CrysrtalReportsViewer2008 can't open report. It say that check the SaveDatawithReport parameter.
    In process  I found that in temp directory on user pc, didn't creates some temprorary files which creates on developer PC. Why? Help me please.
    Sorry for my English.

    There is the code of my programm
    function ParseReport is refreshed the data and change dataconnections for current user
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Data.SqlClient;
    using System.Drawing;
    using System.Text;
    using System.Windows.Forms;
    using System.IO;
    using System.Diagnostics;
    using CRApp;
    using Microsoft.Win32;
    namespace CRApp
         * u041Au043Bu0430u0441u0441 u0434u043Bu044F u0430u0432u0442u043Eu043Cu0430u0442u0438u0437u0438u0440u043Eu0432u0430u043Du043Du043Eu0433u043E u0432u0438u0437u0443u0430u043Bu044Cu043Du043Eu0433u043E u0434u043Eu0441u0442u0443u043Fu0430
         * u043A u0444u0430u0439u043Bu0430u043C u0448u0430u0431u043Bu043Eu043Du043Eu0432, u0441u0433u0435u043Du0435u0440u0438u0440u043Eu0432u0430u043Du043Du044Bu0445 u0432
         * u043Fu0440u043Eu0433u0440u0430u043Cu043Cu0435 Crystal Reports
        public partial class Export2CR_MForm : Form
            public Export2CR_MForm()
                InitializeComponent();
                Start();
            public void Start()
                LoginForm Login = new LoginForm();
                DialogResult Dres = Login.ShowDialog();
                if (Dres == DialogResult.OK)
                    if (Login.GetConStr().ToString() != "")
                        GetReportNamesFromDataBase(Login.GetConStr());
                        SetConnectionString(Login.GetConStr());
                        this.CenterToScreen();
                        Visible = true;
                        Login.Close();
                else
                    Login.Close();
                    this.CenterToScreen();
                    this.OnClosed(null);
                 * u041Fu043Eu043Bu0443u0447u0430u0435u043C u043Fu0443u0442u044C u043A u0432u0440u0435u043Cu0435u043Du043Du044Bu043C u0444u0430u0439u043Bu0430u043C
                TempFilePath = Path.GetTempPath();
             * u041Au0440u0438u0441u0442u0430u043Bu043Eu0432u0441u043Au0438u0439 u0432u044Cu044Eu0432u0435u0440u043Eu043A
            CrystalDecisions.Windows.Forms.CrystalReportViewer viewer;
             * u041Fu0443u0442u044C u043A u0432u0440u0435u043Cu0435u043Du043Du043Eu0439 u043Fu0430u043Fu043Au0435
            private string TempFilePath;
             * u041Fu0430u0440u0430u043Cu0435u0442u0440 u0437u0430u043Fu0438u0441u0438 u0432 u0440u0435u0436u0438u043Cu0435, u0442u0430u0431u043Bu0438u0446u0435 (u0438u0442u0434...)
             * u041Du0443u0436u0435u043D u0434u043Bu044F u0442u043Eu0433u043E u0447u0442u043Eu0431u044B u0432u044Bu0431u0438u0440u0430u0442u044C
             * u043Eu043Fu0435u0440u0435u0434u043Bu0451u043Du043Du044Bu0439 u0434u0430u0442u0430u0441u0435u0442, u0441u043Eu043Eu0442u0432u0435u0442u0441u0442u0432u0443u044Eu0449u0438u0439 u0432u044Bu0431u0440u0430u043Du043Du043Eu0439 u0437u0430u043Fu0438u0441u0438
            private int ObjectIDOfTemplate;
             * u0423u0441u0442u0430u043Du043Eu0432u043Au0430 u0437u043Du0430u0447u0435u043Du0438u044F ObjectIDOfTemplate
            public void SetObjectIDOfTemplate(int /*
                                                   * ObjectID u0442u043Eu0433u043E u0448u0430u0431u043Bu043Eu043Du0430,
                                                   * u043Au043Eu0442u043Eu0440u044Bu0439 u043Du0430u0434u043E u043Fu043Eu043Bu0443u0447u0438u0442u044C
                                                      EnternalObjectID)
                ObjectIDOfTemplate = EnternalObjectID;
             * u041Fu043Eu043Bu0443u0447u0438u0442u044C ObjectID u0448u0430u0431u043Bu043Eu043Du0430
             * u0441 u043Au043Eu0442u043Eu0440u044Bu043C u0440u0430u0431u043Eu0442u0430u043Bu0438 u0434u043Bu044F
             * u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u0435u0433u043E u0432u043Du0435 u0431u0438u0431u043Bu0438u043Eu0442u0435u043Au0438
            public int GetObjectIDOfTemplate()
                return ObjectIDOfTemplate;
             * u041Fu0443u0442u044C u043A u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
            private string TemplateFilePath;
             * u0423u0441u0442u0430u043Du043Eu0432u0438u0442u044C u043Fu0443u0442u044C u043A
             * u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
            public void SetTemplateFilePath(string In)
                TemplateFilePath = In;
             * u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Fu0443u0442u044C u043A
             * u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
            public string GetTemplateFilePath()
                return TemplateFilePath;
             * u0424u0443u043Du043Au0446u0438u044F u043Eu0442u043Au0440u044Bu0442u0438u044F u0444u0430u0439u043Bu0430,
             * u043Fu043Eu043Bu0443u0447u0435u043Du043Du043Eu0433u043E u0438u0437 u0431u0430u0437u044B u0438
             * u043Fu043Eu043Bu043Eu0436u0435u043Du043Du043Eu0433u043E u0432u043E u0432u0440u0435u043Cu0435u043Du043Du0443u044E u043Fu0430u043Fu043Au0443
            public int ParseReport(string FilePath)
                viewer = new CrystalDecisions.Windows.Forms.CrystalReportViewer();
                CrystalDecisions.CrystalReports.Engine.ReportDocument rd =
                    new CrystalDecisions.CrystalReports.Engine.ReportDocument();
                try
                    rd.Load(FilePath);
                    try
                        for (int i = 0; i < rd.DataSourceConnections.Count; i++)
                            rd.DataSourceConnections<i>.SetConnection(
                                GetConnectionString().GetServerName(),
                                GetConnectionString().GetDatabaseName(),
                                GetConnectionString().GetUserName(),
                                GetConnectionString().GetPassword()
                            for (int j = 0; j < rd.Database.Tables.Count; j++)
                                DataTable dataSet = new DataTable();
                                SqlConnection C = new SqlConnection(GetConnectionString().ToString());
                                string ViewName = GetDataViewName(GetConnectionString(), ParseTableName(
                                                rd.Database.Tables[j].Name));
                                SqlCommand Q = new SqlCommand("select * from " + ViewName
                                    , C);
                                Q.CommandType = CommandType.Text;
                                SqlDataAdapter adapter = new SqlDataAdapter();
                                adapter.SelectCommand = Q;
                                adapter.Fill(dataSet);
                                rd.Database.Tables[j].SetDataSource(dataSet);
                    catch (Exception e)
                        MessageBox.Show(e.Message);
                    try
                        SetTemplateFilePath(TempFilePath + "\\" + FileTreeView.SelectedNode.Text.ToString() + ".rpt");
                        rd.ReportOptions.EnableSaveDataWithReport = true;
                        viewer.ReportSource = rd;
                        viewer.RefreshReport();
                        rd.SaveAs(TemplateFilePath);
                        rd.Close();
                        return 0;
                    catch (Exception e)
                        MessageBox.Show(e.Message);
                        return -1;
                catch (Exception ex)
                    rd.ReportOptions.EnableUseDummyData = true;
                    rd.ReportOptions.EnableSaveDataWithReport = true;
                    viewer.RefreshReport();
                    rd.SaveAs(TemplateFilePath);
                    MessageBox.Show("Error: Could not read file from disk. Original error: " + ex.Message);
                    return -1;
             * u0420u0430u0437u0431u0438u0435u043Du0438u0435 u0438u043Cu0435u043Du0438 u0442u0430u0431u043Bu0438u0446u044B
             * u0434u043Bu044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u043Du043Eu043Cu0435u0440u0430 u043Au043Bu0430u0441u0441u0430
            public string ParseTableName(string TableName)
    //            MessageBox.Show(TableName);
                int x = 0;
                if (TableName.Contains("Class"))
                    x = TableName.LastIndexOf("s");
                    return TableName.Remove(0,x+1);
                if(TableName.Contains("Attr"))
                    x = TableName.IndexOf("r");
    //           MessageBox.Show(x.ToString());
    //           MessageBox.Show(TableName.Remove(0, x+1));
                return TableName.Remove(0, x+1);
             * u0424u0443u043Du043Au0446u0438u044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u0444u0430u0439u043Bu0430 u0438u0437 u0431u0430u0437u044B
            public int ParseReportWithDataBase()
                try
                    string ConnectionString = GetConnectionString().ToString();               
                    SqlConnection C = new SqlConnection(ConnectionString);
                    C.Open();
                    string SelectString = "select P119 from "+ GetDataViewName(GetConnectionString(),"24") +" where P115='";
                    SelectString = SelectString+FileTreeView.SelectedNode.Text.ToString()+"'";
                    SqlCommand Q = new SqlCommand(SelectString, C);
                    Q.CommandType = CommandType.Text;
                    SqlDataAdapter adapter = new SqlDataAdapter();
                    adapter.SelectCommand = Q;
                    DataTable table = new DataTable();
                    adapter.Fill(table);
                    byte[] b = (byte[])table.Rows[0].ItemArray.GetValue(0);
                    FileStream fs = File.Create(TempFilePath+"\\"+FileTreeView.SelectedNode.Text.ToString()+".rpt");
                    fs.Write(b, 0, b.Length);
                    fs.Close();
                    C.Close();
                    return 0;
                catch (Exception ex)
                    MessageBox.Show(ex.Message);
                    return -1;
             * u0421u0442u0440u0443u043Au0442u0443u0440u0430, u043Eu043Fu0438u0441u044Bu0432u0430u044Eu0449u0430u044F u043Fu0430u0440u0430u043Cu0435u0442u0440u044B
             * u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F u043A u0431u0430u0437u0435 u0434u0430u043Du043Du044Bu0445,
             * u043Au0430u043A u0434u043Bu044F u0432u043Du0435u0448u043Du0435u0433u043E u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F
             * u0442u0430u043A u0438 u0434u043Bu044F u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E
            public struct ConnectionString
                 * u0418u043Cu044F u0441u0435u0440u0432u0435u0440u0430 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
                private string DataSource_Value;
                 * u041Du0430u0437u0432u0430u043Du0438u0435 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
                private string InitialCatalog_Value;
                 * u0418u043Cu044F u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
                private string UserID_Value;
                 * u041Fu0430u0440u043Eu043Bu044C
                private string Password_Value;
                 * u041Fu0435u0440u0435u0433u0440u0443u0436u0435u043Du043Du044Bu0439 u043Au043Eu043Du0441u0442u0440u0443u043Au0442u043Eu0440
                 * u0434u043Bu044F u0440u0443u0447u043Du043Eu0439 u0438u043Du0438u0446u0438u0430u043Bu0438u0437u0430u0446u0438u0438
                 * u0441u0442u0440u043Eu043Au0438 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F,
                 * u043Du0443u0436u0435u043D u0434u043Bu044F u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u0435u0433u043E
                 * u0432 u043Eu0434u0440u0443u0433u0438u0445 u0444u043Eu0440u043Cu0430u0445
                public ConnectionString(string /*
                                                * u0418u043Cu044F u0441u0435u0440u0432u0435u0440u0430 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
                                                  InDataSource_Value,
                                        string /*
                                                * u041Du0430u0437u0432u0430u043Du0438u0435 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
                                                  InInitialCatalog_Value,
                                        string /*
                                                * u0418u043Cu044F u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
                                                */ InUserID_Value,
                                        string /*
                                                * u041Fu0430u0440u043Eu043Bu044C
                                                */ InPassword_Value)
                    DataSource_Value = InDataSource_Value;
                    InitialCatalog_Value = InInitialCatalog_Value;
                    UserID_Value = InUserID_Value;
                    Password_Value = InPassword_Value;
                 * u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F u0441u0435u0440u0432u0435u0440u0430
                 * u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
                public string GetServerName()
                    return DataSource_Value;
                 * u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Du0430u0437u0432u0430u043Du0438u0435
                 * u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
                public string GetDatabaseName()
                    return InitialCatalog_Value;
                 * u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F
                 * u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
                public string GetUserName()
                    return UserID_Value;
                 * u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Fu0430u0440u043Eu043Bu044C
                 * u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
                public string GetPassword()
                    return Password_Value;
                 * u041Fu0435u0440u0435u0432u043Eu0434 u0441u0442u0440u0443u043Au0442u0443u0440u044B u0432 u0442u0435u043Au0441u0442u043Eu0432u044Bu0439 u0432u0438u0434
                 * u0434u043Bu044F u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u043Fu0440u0438 u0441u043Eu0437u0434u0430u043Du0438u0438 u043Au043Eu043Du043Du0435u043Au0442u043Eu0440u0430
                public override string ToString()
                    return "Data Source="+DataSource_Value+";Initial Catalog="+
                        InitialCatalog_Value+";User ID="+UserID_Value+";Password="+
                        Password_Value;
             * u0424u0443u043Du043Au0446u0438u044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u0441u0442u0440u043Eu043Au0438 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F u043Fu043E u0443u043Cu043Eu043Bu0447u0430u043Du0438u044E
             * u043Du0443u0436u043Du0430 u0431u044Bu043Bu0430 u0434u043Bu044F u0442u0435u0441u0442u043Eu0432
            static private string GetDefaultConnectionString()
                return "Data Source=BSRV01;Initial Catalog=Prokat_Last;User ID=sa;Password=";
             * u0412u043Du0443u0442u0440u0435u043Du043Du044Fu044F u0441u0442u0440u043Eu043Au0430 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
             * u043Du0435 u0434u043Eu0441u0442u0443u043Fu043Du0430 u0434u043Bu044F u0432u044Bu0437u043Eu0432u0430 u043Du0430u043Fu0440u044Fu043Cu0443u044E
            private ConnectionString localConnectionString;
             * u0423u0441u0442u0430u043Du043Eu0432u0438u0442u044C u0441u0442u0440u043Eu043Au0443 u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
            public void SetConnectionString(ConnectionString CS)
                this.localConnectionString = CS;
             * u041Fu043Eu043Bu0443u0447u0438u0442u044C u0441u0442u0440u043Eu043Au0443 u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
            public ConnectionString GetConnectionString()
                return this.localConnectionString;
             * u0424u0443u043Du043Au0446u0438u044F u0443u0434u0430u043Bu0435u043Du0438u044F u0432u0440u0435u043Cu0435u043Du043Du043Eu0433u043E u0444u0430u0439u043Bu0430
             * u043Fu043Eu0441u043Bu0435 u0437u0430u0432u0435u0440u0448u0435u043Du0438u044F u0432u0441u0435u0445 u043Eu043Fu0435u0440u0430u0446u0438u0439 u0441 u0448u0430u0431u043Bu043Eu043Du043Eu043C
            private void MainForm_FormClosed(object sender, FormClosedEventArgs e)
                if (FileTreeView.Nodes.Count!=0)
                    if (File.Exists(TemplateFilePath))
                        File.Delete(TemplateFilePath);
             * u041Eu0431u0440u0430u0431u043Eu0442u0447u0438u043A u0434u0432u043Eu0439u043Du043Eu0433u043E u043Au043Bu0438u043Au0430
             * u043Fu043E u0448u0430u0431u043Bu043Eu043Du0443 u0432 u0434u0435u0440u0435u0432u0435 u0444u0430u0439u043Bu043Eu0432
            public void FileTreeView_DoubleClick(object sender, EventArgs e)
                int Result = 0;
                try
                    Result = ParseReportWithDataBase();
                    if (Result == 0)
                        Result = ParseReport(TempFilePath + FileTreeView.SelectedNode.Text.ToString() + ".rpt");
                        if (Result == 0)
                            Process.Start(TemplateFilePath);
                    else
                        MessageBox.Show("u0424u0430u0439u043B u043Du0435 u043Cu043Eu0436u0435u0442 u0431u044Bu0442u044C u043Eu0442u043Au0440u044Bu0442!");
                catch (Exception ex)
                    MessageBox.Show(ex.Message);
             * u041Fu043Eu043Bu0443u0447u0435u043Du0438u0435 u0432u0441u0435u0445 u0444u0430u0439u043Bu043Eu0432 u0441 u0440u0430u0441u0448u0438u0440u0435u043Du0438u0435u043C .rpt
             * u0438u0437 u0431u0430u0437u044B u043A u043Au043Eu0442u043Eu0440u043Eu0439 u043Fu0440u0438u0441u043Eu0435u0434u0438u043Du0438u043Bu0438u0441u044C
            public void GetReportNamesFromDataBase(ConnectionString CS)
                try
                    SqlConnection C = new SqlConnection(CS.ToString());
                    SqlDataAdapter adapter = new SqlDataAdapter();
                    DataTable table = new DataTable();
                    table.Clear();
                    string sqlcom = "Select P115 from " + GetDataViewName(CS,"24") + " where P116 like '%.rpt'";
                    SqlCommand Q1 = new SqlCommand(sqlcom,C);
                    Q1.CommandType = CommandType.Text;
                    adapter.SelectCommand = Q1;
                    adapter.Fill(table);
                    FileTreeView.Nodes.Clear();
                    for (int i = 0; i < table.Rows.Count; i++)
                            FileTreeView.Nodes.Add(table.Rows<i>.ItemArray.GetValue(
                                table.Rows<i>.ItemArray.Length-1).ToString());
    //                        MessageBox.Show(table.Rows<i>.ItemArray.GetValue(0).ToString());
                    C.Close();
                catch (Exception ex)
                    MessageBox.Show(ex.Message);
             * u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F DataView
             * u0434u043Bu044F u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
            private string GetDataViewName(ConnectionString CS,string ClassID)
                string ViewName = "";
                SqlConnection C = new SqlConnection(CS.ToString());
                C.Open();
                SqlCommand Q = new SqlCommand("[dbo].[_SysGetClassesInfoNew1]"/*P115 from dbo.Attr24 where P116='.rpt'*/, C);
                Q.CommandType = CommandType.Text;
                SqlDataAdapter adapter = new SqlDataAdapter();
                adapter.SelectCommand = Q;
                DataTable table = new DataTable();
                adapter.Fill(table);
                for (int i = 0; i < table.Rows.Count; i++)
                    if (table.Rows<i>.ItemArray.GetValue(0).ToString() == ClassID)
                        ViewName = table.Rows<i>.ItemArray.GetValue(13).ToString();
                        // MessageBox.Show(ViewName);
                C.Close();
                return ViewName;
             * u041Eu0431u0440u0430u0431u043Eu0442u0447u0438u043A u043Au043Bu0438u043Au0430 u043Du0430 u0432u044Bu043Fu0430u0434u0430u044Eu0449u0435u043C
             * u043Cu0435u043Du044E u0432 u043Fu0443u043Du043Au0442u0435 "Delete"
            private void deleteToolStripMenuItem_Click(object sender, EventArgs e)
                FileTreeView.SelectedNode.Remove();

  • Report Portlets do not refresh data.

    How can I refresh a report portlet?
    I have created a report and a forms provider based on the same table. I put the portlets on separate TABS on the same PAGE. The report works fine, but when I update the information on the form and return to the report it does not reflect the changes. I have pressed 'refresh', I have gone to another page and come back, no luck. The only way to see the changes is to log out and back in again. Any ideas?
    Thanks, Deb

    I had caching turned off. When I turned on both content and page definition, I was unable to query my forms. The forms and reports are on the same page, different tabs. When I select cache page definition only, I get the same results as no caching. The forms will query my data, I can update, but when I return to the reports TAB, the data has not changed. (Yes, I did click refresh.) I have found that if I click the 'Customize' link on the portlet containing the report and then click 'OK' the data will update. This, however gives me a new error that I will worry about later. For now, the users have 'Minimize' but do not have the 'Customize' Link and the 'minimize' link does not refresh the data, nor give me the new error.

  • PDF output does not refresh data in BI Publisher, XML and HTML do refresh

    I just upgraded to BI Publisher 10.1.3.4.0 and I noticed that the PDF format of the reports does not reflect recent changes in data, while XML data and HTML output do reflect changes in data immediately.
    I'm using BI Publisher to print APEX applications reports. When I change some data in APEX forms, I click again in the Print button and the data remains unchanged. I made some testing inside Oracle BI Publisher, and noticed that XML data and HTML output do reflect changes, but PDF output remains with the old data for some unknown amount of time. I cannot identify a method to force the PDF to refresh, just un-log and log in again several times until the data appears updated. This is serious because when users change data and print again, they expect the changes to be reflected in the new printable report, and may not notice that the data is the old version.
    OS is Oracle Enterprise Linux.
    Any help on this will be very welcome.
    Francisco

    Open the report in Edit Mode Click on the reports and in the properties section Uncheck the
    Enable Document Cache Property and your issue should be resolved.

  • How to use url to open report and refresh report's data,but the report's toolbar haven't "refresh data" button

    Post Author: madbird
    CA Forum: WebIntelligence Reporting
    HI,
    scenario is
    I hope use url to open the report,and refresh the report data,but I didn't the user use the "refresh data" button to refresh the report's data.How to do that?
    regards

    Post Author: madbird
    CA Forum: WebIntelligence Reporting
    Thank you for your attention, amr_foci .
    I created a Web Intelligence report,there will be more than 30 companies use.The company only allowed to see the Company Data. I want to use the url of the way, from my company in the development of the system to open report, and refresh reported Table data.but do not want users to use the toolbar of "data refresh" button to refresh the data .
    Now the question of identity authentication system, as well as statements by url open the question of Has been resolved, but it can not shield statements through the pages of "data refresh" button.
    In addition, I now used by the business object XI system is posted on the JAVA environment.
    Regards,

  • Dates not refreshed correctly

    Hi,
    We are using service contracts BT112H_SC from Web UI. From this component we are calling SAP GUI actions (using transaction launcher) to make changes to the contract u2013 like cancellations, date changes and so on.
    We now have a problem with refreshing the Dates assignment block from service contract. The Dates assignment block is handled within a separate component called BTDATES and is called from BT112H_SC using component usage.
    When running an action that should change the dates (due to for example an Annulation of contract), the status is set to Cancelled but the dates Contract end date is not changed. I am calling function module CRM_ORDER_READ_OW after the action is executed in some places and see that the dates are updated correctly in the buffer, but they are not showing up in the Web UI.
    It seems as the dates are set correctly if I donu2019t expand the assignment block Dates before running the action. So if I expand the assignment block after running the action the dates are set correctly. If expanding the Dates assignment block before running the action, the dates are not updated.
    The dates are also set correctly after saving the contract so it is just a matter of visibility.
    Also if I (after running the action), go to one of the items and expanding the Dates assignment block on item level and then go back to header level the dates are displayed correctly.
    I have enhanced component BTDATES/Dates u2013 Method DO_PREPARE_OUTPUT where I use the following commands that should refresh the values.
    me->typed_context->btdate->collection_wrapper->publish_current( ).
        lr_ent ?= me->typed_context->btdate->collection_wrapper->get_current( ).
        lr_ent->reread( ).
    I have also used the command modify without success.
    Somehow the BTDATES component must be refreshed to read the dates from the buffer correctly after the action is executed.
    Do anyone have any suggestions on how to handle this?
    Regards Andreas

    Hi,
    Thanks a lot for your answers. I need all input I can get.
    Kathirvel: I can see that event 0002_expand_link is triggered (from class  ZL_BT112H_S_MAINWINDOW_IMPL I believe) when expanding the Dates assigment block. But I cannot figure out what is happening next.
    But after expanding the assignment block once, the event is not triggered if I expand/collapse the assigment block again.
    I see that in CL_BSP_WD_VIEW_MANAGER ~ DO_FINISH_INPUT when expanding Date assignment block, a BOL_CORE->MODIFY statement is made. This code is triggered when expanding the Date assignment block (but only first time).
    Do you know which event I could call to trigger the update again?
    asen2222 : I entered the code lr_core->modify( ) in ZL_BT112H_S_OVVIEWSET_IMPL ~ DO_PREPARE_OUTPUT which is called after my action is executed and the dates are modified in the buffer. But it doesn't work. When debugging the modify( ) method it seems as it have no delta-information to save.
    I have also tried setting the statement in component BTDATES - ZL_BTDATES_DATES0_IMPL ~ DO_PREPARE_OUTPUT without success.
    In the same place -  component BTDATES - ZL_BTDATES_DATES0_IMPL ~ DO_PREPARE_OUTPUT  -  I also put the following code:
    lr_ent ?= me->typed_context->btdate->collection_wrapper->get_current( ).lr_ent->reread( ).
    This do not work either. But if I debug the reread method and go into
    method REREAD_ENTITY of CL_CRM_BOL_CORE I see following code:
    lv_relation_cacheable = me->object_model->relation_is_cacheable(
    lv_parent_relation_name ).
    If I then set lv_relation_cacheable = ' ', it seems to bypass the buffer and read the data from underlying layers. And then the values is showingcorrectly updated!.
    I believe it is reading the relation from table CRMC_ORLSTA_BTIL but this
    table do not include field DO_NOT_BUFFER so I assume this field should
    never be set for business transactions. But in this case it wouldhave worked for us.
    Regards Andreas

  • BEx not refreshing data on all embedded queries:One variable, one variant:

    Good day
    I have the following challenge. I have created a BEx workbook and inserted one query multiple times into this workbook. I have removed the result area of each query to a separate sheet to enable the use of different filter values and to use some excel formatting to change fonts, colours etc.
    I have created a ocalday variable selection to this query. The data must be displayed for the last day of each month for a period of 12 months from a certain ocalday. I created and saved a variant for this, adding the last ocalday of each month from 2009/05/31 to 2010/04/30 in the selection option of the variable, thus it looks like this in the variable selection of single values:
    2009/05/31
    2009/06/30
    2009/07/31
    Etc
    Etc
    I have ticked the option u201Crefresh queries when opening workbooku201D in the properties of the query and applied it to all. When the user opens the workbook, the users must select the variant on the variable selection screen and refresh all the queries.
    Now, my challenge comes in where only one query is refreshed with the required dates. All the other results cannot be found and it displays the last date in the variant (ie. 2009/04/30). You need to go and refresh each query separately, using the same variant. This is time consuming as some workbooks have > 50 queries.
    Thus, one query embedded multiple times, one variable, one variantu2026u2026
    Why does the variant not apply to all the embedded queries when data is refreshed?
    Your expert assistance will be appreciated.
    Have a nice day
    Cj

    Hi,
    When you have multiple queries in the workbook which have variables with that,refreshing the workbook,will prompt you the variable screen where you can enter the variables which can take effect in all the queries.
    Go to Workbook Settings->General tab->Check Refresh workbook on Open->Go to Variables tab->Check Process Varaibles on Refresh and Display Duplicate Variables Only Once.Save and reopen the workbook.
    Now it will prompt for variable screen where you ca enter the variable values which is common for all the queries.
    The data will be shown in all the ANalysis items based on the variables entered for the queries.
    Rgds,
    Murali
    Edited by: MuraliKrishnan E on Sep 10, 2009 2:21 PM

  • Sharepoint excel data not refreshed

    Hi All,
    I have SharePoint foundation 2010, add one excel document after that trying to open that excel document it is showing error message.
    Error message:-
    Unable to referesh data for a data connection in the workbook.
    try again or contact your sharepoint adminstator. the following connection failed to referesh.
    powerpivot data.
    -> click on OK it is opened after that go to menu Data refresh selected connection. It is open error Message.
    It is showing error message
    Error message: 
    The current selection is not within a refreshable region of the workbook.
    Select a refreshable region,such as a pivot Table, before clicking on the refersh selected connection Buttion.
    Unable to refresh data for a connection in the workbook.Try again or contact your administrator. The following
    connections failed to refresh: ThisWorkbookDataModel
    How to fix this issue. Please
    let me know how to resolve this.
    hope this helps.
    Best Regards.
    Johnson.

    Hi,
    From your description, I know when you open excel document and it pops up some error message regarding refresh data for a data connection in a library within SharePoint Foundation 2010.
    For Excel workbooks that contain PowerPivot data, Excel Services returns this error if it submits a connection request to a PowerPivot server and the request fails. Excel Services cannot connect to or load the PowerPivot data. You could refer to this article:
    https://msdn.microsoft.com/en-us/library/ff487856.aspx?f=255&MSPPError=-2147217396.
    If you use Excel 2013 in your environment, you could refer to this article:
    "Unable to refresh data for a data connection in the workbook" error when you interact with an Excel 2013 workbook in a SharePoint Server 2010 farm
    http://support.microsoft.com/en-us/kb/2755126
    Besides, you could get something from these links:
    http://social.technet.microsoft.com/wiki/contents/articles/11566.refreshing-powerpivot-for-sharepoint-2010-sql-2008-the-data-connection-uses-windows-authentication-unable-to-refresh-data-for-a-data-connection-in-the-workbook-errors.aspx
    http://www.sharemuch.com/2012/01/22/troubleshooting-powerpivot-unable-to-refresh-data-for-a-data-connection-in-the-workbook/
    If above all don’t work, please check if there are more related error messages (which recorded around the time of error occurring when you open Excel file) from ULS log for help troubleshoot the issue.
    Best Regards,
    Vincent Han
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Problem between SSMS and Report ! Filter query not showing data or showing wrong data

    Hi all,
    In short: I have a report with multiple values such as name of shop, postal code etc. The parameters have no default value and act as "like". If someone enters "krant" he'll get all the shop names that contain "krant" in their
    name etc. 
    Same goes for postal code, if someone enters 2550 he'll get all data for 2550. The problem although is that if a user start with postal code as parameters and leaves the shop name empty, the shop name is not shown in my report! The other way around it works,
    when I enter shop name i'll get all shops + postal code in my report.
    I know this is because POS name cannot be shown in report because it's left blank, but I want my MDX query to be able to give me the POS names even if I only enter postal code.
    Can someone please please look at my query below? I need to add 4 more parameters this way later on too!
    SELECT 
    [Measures].[Sales amount]
     ON COLUMNS, NON EMPTY
    Filter(
                                   [Point of sale].[POS name].AllMembers,
                                   InStr(
                                                   [Point of sale].[POS name].CurrentMember.MEMBER_CAPTION,
                                                   @PAR_POSName
                                   ) > 0
    *Filter(
                                   [Point of sale].[POS postal code].AllMembers,
                                   InStr(
                                                   [Point of sale].[POS postal code].CurrentMember.MEMBER_CAPTION,
                                                  @PAR_POSTAL_CODE
                                   ) > 0
    *[Point of sale].[Client id].[Client id]
    *[Point of sale].[POS id].[POS id]
    *[Point of sale].[POS street].[POS street]
    *[Point of sale].[POS town].[POS town]
    *[Point of sale].[POS housenumber].[POS housenumber]
    ON ROWS
    FROM [mycube]

    You have to use
    StrToMember (MDX) /
    StrToSet (MDX) /
    StrToTuple (MDX) to convert the Parameter; see
    Parameterized Reporting Services Reports with Analysis Services as a Data Source
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • UIX form will not refresh data within session

    I have some UIX forms to view a table, they displays data fine but when the underling table data changes (from another user session or an update trigger from different table) the forms will not show refreshed data, unless I delete my browser session cookie. Is there a simple way to fix this, and cause data to be reloaded each time it’s displayed? I'm using JDeveloper 10.1.2
    Thanks, Craig Smith
    Message was edited by:
    user503876
    Message was edited by:
    user503876

    Dear Sir...
    in the struts page flow diagram
    1- create a data action
    2- drag the execute method from the viewobject methods and drop it on the data action
    3- draw a page forward from the data action to your data page
    4- finally ad a refresh link in your page which links to your data action
    now each time you click the refresh button on your page, the execution will go to the data action, where the execute method is executed (the data is refreshed) and then the control goes back to your page.
    best regards

  • Transaction DB02 not refresh data

    Hello,
    we have installed ECC5.0 on OS400 with DB400. We have an issue with transaction DB02, it does not show new data, i mean no refresh. The last data had some months.
    We have checked the transaction DB4COCKPIT and works ok, it showme actually data.
    What can we check?
    Thanks

    Hai,
    Have you checked for the Standard jobs in your system, please chk whether they are running or not.
    Also check the notes:
       1. 1002840 - No data or obsolete data in DB Space Statistic monitor
       2. 1028624 - Overview of DBA Cockpit for Oracle
       3. 907443 - Oracle database monitor
    Hope this helps.
    Regards,
    Yoganand.V

  • ADF table data not refresh

    hi,
    i am create a adf table using data control. value of adf table depend on view object. where i bind a variable in where clause.
    now i am giving the value of whereClauseParam using using view object instance in backing bean method.
    when i pressed command button method run properly but adf table not refresh and not showing data.
    thanks in Advance

    public void callData(ActionEvent ae) {
    String amDef = "com.jagran.in.model.view.updatable.AppModule";
    String config = "AppModuleLocal";
    ApplicationModuleHandle handle = null;
    ApplicationModule am;
    try {
    handle = Configuration.createRootApplicationModuleHandle
    (amDef, config);
    //am = Configuration.createRootApplicationModule(amDef,config);
    // ApplicationModule sam = handle.useApplicationModule();
    am=handle.useApplicationModule();
    am.processChangeNotifications();
    ViewObject svo = am.findViewObject("BindView1");
    svo.setNamedWhereClauseParam("id","JK0554");
    svo.executeQuery();
    ((ViewObjectImpl)svo).refreshCollection(null, false, false);
    am.processChangeNotifications();
    svo.reset();
    while (svo.hasNext()) {
    Row r = svo.next();
    System.out.println( (String)r.getAttribute(1));
    } catch(Exception e)
    System.out.println(e);
    finally {
    if (handle != null)
    Configuration.releaseRootApplicationModuleHandle(handle, false);
    }

  • Excise invoice is not saving and not showing datas

    in erxcise invoice i ve made settings as per the sap best practices then also the excise invoice is not saved and not generated also
    please help me to solve the problem
    the error is coming like this
    Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
    Message no. 8I336
    i ve already maintainthe number range for this object in tool in tax in goods moment
    please give some better advice for the excise invoice setting.

    Sub Transaction type determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
    Sub transaction type is also used for determining the accounts while
    doing excise removals.
    Within CIN the account determination is based on the transaction type.
    So normally you can have a single set of accounts for Excise
    utilization. In case you need alternate account determination for
    handling various scenarios you can define sub transaction types. The
    sub transaction types and corresponding account assignments needs to be
    maintained in CIN customization
    To make customization of Sub Transaction type, goto
    <b>SPRO --> Logistics General --> Tax on Goods Movements --> India --> Account Determination and check whether you have assigned second and third one, viz. "Specify Excise Accounts per Excise Transaction and Specify GL Accounts per Excise Transaction".</b>
    Check
    <b>Taxes on goods mvnt--indiaaccnt determination---specify excise accnts for excise transaction...maintain the sub transction type , ip or 01,
    against the appropriate ETT</b>
    Message was edited by:
            sam masker

Maybe you are looking for